Used Exile Spyder Ii Dts 30 for sale (25,522)

Condition: used, mileage: 105,575 km, power: 95 kW (129.16 HP), first registration: 03/2014, fuel type: diesel, overall weight: 5,000 kg, next inspection (TÜV): 04/2028, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, * 1st hand Lodpfjyy Txyox Akuorl * Low mileage * 5-ton payload, twin rear wheels (currently downrated to 3.5t) * Extra-long flatbed: 4.30 meters * Trailer hitch with 3-ton towing capacity * Automatic transmission * TÜV valid until 04/2028 * 3-seater Special equipment: Hill start assist, 13-pin trailer socket, 180 A alternator, spare wheel with super single tires (235/65 R16), spare wheel holder under rear frame incl. jack, interior rear-view mirror, rear panel with window, cabin seating: twin passenger bench, reinforced rear stabilizer, reinforced front stabilizer, 95 Ah AGM battery Additional features: Adaptive brake light, driver airbag, washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), exterior mirrors with integrated indicators, 74 Ah battery, brake assist, braking system with ABS + ASR, cabin roof lining, lockable glove compartment, standard flatbed body, main fuel tank 75 liters, headlight range adjustment, truck registration, model update, engine: 2.1 l – 95 kW CDI CAT (2143 cc), wheelbase: 4325 mm, smoker package, low emissions according to Euro 6 standard, driver's seatbelt with warning system, seat trim/upholstery: Lima fabric, adjustable passenger seat, ASSYST maintenance interval indicator, heat-insulating glass, permissible GVW: 5.0 t, twin rear wheels on 2nd/rear axle.

Condition: used, mileage: 105,575 km, power: 95 kW (129.16 HP), first registration: 03/2014, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 04/2028, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, * 1st hand * Low mileage * 5-ton twin rear wheels (currently downgraded to 3.5 t GVW) * Maxi long flatbed: 4.30 meters Ljdpfxjyy Tx He Akusrl * Tow bar: 3-ton towing capacity * Automatic transmission * TÜV valid until 04/2028 * 3-seater Special features: Hill Start Assist, 13-pin trailer socket, 180 A alternator, spare wheel with super single tire (235/65 R16), spare wheel holder under rear frame incl. jack, interior rear-view mirror, rear panel with window, double passenger seat in cab, rear stabilizer, heavy-duty front stabilizer, 95 Ah AGM battery Additional equipment: Adaptive brake light, driver's airbag, washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), exterior mirrors with integrated indicators, 74 Ah battery, brake assist, braking system with ABS+ASR, cab roof liner, lockable glove compartment, body type: standard dropside, main fuel tank: 75 liters, headlight leveling control, truck registration, model update, engine: 2.1 L - 95 kW CDI CAT (2143 cc), wheelbase: 4,325 mm, smoker's package, low emissions in compliance with Euro 6, driver’s seatbelt with warning system, upholstery: Lima fabric, adjustable passenger seat in cab, ASSYST maintenance interval display, heat-insulating glazing, GVWR: 5.00 t, dual tires on 2nd axle/rear axle.

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 1 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS open (windows XP) Adjustable feeding speed (m/min ) 10 - 50 Without Transmission bar (Master & Slave system) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Hogging Units (2 x Kw 8) EDGE-BANDING PART (for each side): Glueing Unit (EVA-Hot Melt + Quick Melt Unit) 04.1570 + 283.205 Edge coils supporting unit (No. 6 reels) SERVO-DRIVE guillotine shear (cutting the edge/band) Lrsdpfxjyypi Us Akujl Pressure zone (N.C. adjustment) Fine Trimming unit 08.055 (Kw 1 x 2) 0°-30° Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617-2 (2 x Kw 0,18) Spraying Unit (for polishing liquid) Milling grooving unit 08.190 (1 x Kw 4,5) 0°-90° / 180°-270°

Condition: new, empty load weight: 5,740 kg, maximum load weight: 24,260 kg, overall weight: 30,000 kg, axle configuration: 3 axles, color: silver, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, rotating beacon, 3 axles, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), extendable to 3m width, lashing rings, 2-piece loading ramps, mechanical ramps, extendable drawbar, side aluminium underrun protection, twin tyres, EBS. Body: loading length approx. 8.5m, extendable to 3.05m. Demonstration vehicle! Parabolic suspension with axle compensation at the rear, 3 x 10t SAF axles, permissible gross weight up to 30t possible, drawbar adjustable in length. New vehicle from stock with day registration to the manufacturer! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors! Lsdpsxbttqjfx Akuerl

Condition: good (used), Year of construction: 2003, X 1740mm, Y 766mm, Z 660mm 10000 rpm Parts shown by hand not come. Lsdpfx Ajwyblzjkuerl

Condition: ready for operation (used), Year of construction: 2013, operating hours: 41,569 h, controller manufacturer: AMADA, controller model: AMNC 3i, laser power: 4,000 W, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,550 mm, number of axes: 4, This 4 axis CO2 laser cutting machine was manufactured in 2013 and features a powerful 4000 W Amada Fanuc AF4000i-c laser source. With a 3070 x 1550 mm travel range and a rotary index unit for tube processing, it is also equipped with the AMNC 3i control unit and a pallet changer for enhanced productivity. If you are looking to get high quality cutting capabilities, consider the AMADA FO-3015 II RI machine we have for sale. Reach out for more information. • Laser Type: CO2 Laser, AC-HF excited, fast axial flow • Laser Output: 4000 Watts (Continuous), 5000 Watts (Peak) • Optical system: Flying optics • Travel Range (X x Y x Z): 3070 x 1550 x 200 mm • Max. Table Load: 920 kg • Max. Material Thickness (Mild Steel): 20 mm • Positioning Speed: 80 m/min (X/Y), 60 m/min (Z), 113 m/min (simultaneous) • Positioning Accuracy: ± 0.01 mm / 500 mm • Positioning Repeatability: ± 0.005 mm • Control unit: AMNC 3i (21.5-inch screen) Lrsdjyv Ak Depfx Akuel • Laser source type: AO4B-0815-B342 (YOM 2013, S/N L13X40476) • Laser stability: ± 2% • Laser gas consumption: approx. 10 l/h • Laser gas mixture: • CO₂: 5 ± 0.25% • He: 60 ± 3% • N₂: 35 ± 1.75% • Beam mode: approximately TEM₀₀ • Beam divergence: less than 2 mrad • Pulse frequency: 1 – 2000 Hz • Environmental conditions: 5 – 35°C at max. 75% humidity • Temperature range (operating temp.): 25°C (± 1°C) • Laser Wavelength: 10.6 µm • Laser Gas Consumption: approx. 10 l/h • Power Consumption: 12-59 kW (average for entire system) • Rotary Index (RI): Integrated capability for tube/profile processing; RI unit present per documentation • Power requirement (main unit nameplate): 200V, 50/60 Hz • Machine Weight: 13,550 kg • Oscillator nameplate: Model AF4000i-C, weight 1200 kg • Main unit nameplate: Model FO3015IIRI • Last service by Fanuc: January 5, 2023 • O-rings on the laser tube replaced • Internal mirrors replaced • Turbo-blower replaced Additional equipment • Pallet changer: LST3015 RI (YOM 2017, S/N 30153398) • Power supply/Transformer: TG513 (S/N 987/13) • Cooling/Extraction unit: PC5011FOm24kw (S/N 7196850001) • VPSS 3i Tube Full Solution Pack software • Steel-Prisma table support • Rotary Index pipe cutting unit

Condition: excellent (used), Year of construction: 2020, PLASMA CUTTING TABLE WITH COMPRESSED AIR: TYPE REMOCUT II 1500-3000/105A PNEUMATIC ENGRAVER Ljdpfxeyug Eno Akuerl

Year of construction: 1993, condition: ready for operation (used), This Hollinger MSE-II-EP-SB-300-450 was manufactured in 1993. It is part of a comprehensive line that includes various welding and cutting machines, enhancing versatility and productivity in operations. Ideal for those looking to get high-quality welding capabilities, consider the Hollinger MSE-II-EP-SB-300-450 machine we have for sale. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Lrodpfx Akox Nr Ncjujl • Comprehensive set of welding and cutting machines, compressors, handling, and assembly equipment. • Includes a range of machine types such as cutting machines, milling machines, saws, compressors, and various handling and assembly equipment. • Ideal for large-scale manufacturing operations due to the variety and capacity of equipment. • The equipment list includes machines built between 1989 and 2014. Extra Information Includes diverse equipment such as plasterers, drills, screwdrivers, extractors, tables, sorting carts, shelving, and cabinets, enhancing flexibility and operational capability.

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 260 mm, travel distance Y-axis: 115 mm, overall weight: 6,850 kg, controller manufacturer: OKUMA, controller model: OSP-P300LA, number of axes: 5, This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information. Lrsdpfx Akex D Rvneuel • Distance between spindle noses: 1085 mm • Maximum turning diameter: 340 mm • Bar capacity through main spindle draw tube: 80 mm • Sub spindle bore: 63 mm • Bar capacity through sub spindle draw tube: 52 mm • Rotational speed of driven tools: 45–6000 rpm Additional equipment • Iemca KID 80/16 Plus bar feeder (2022) — KID 80 included • 250 mm SMW chuck on the main spindle • 170 mm Kitagawa chuck on the sub spindle • 6 sets of soft jaws • 4 straight driven tool holders • 4 angled driven tool holders • 2 double turning tool holders • 4 boring bar holders • 8 standard turning tool holders • 8 straight ER holders with about 30 ER collets

Condition: refurbished (used), PRICE ON REQUEST! > used & tested completely overhauled, all wear parts renewed - completely measured - gear backlash axle 4 - 0,02 WM axle 5 - 0,02 WM axle 6 - 0,01 WM - Central hand readjusted - Endurance test 8 hours at 100 % load - Delivery in a special box (insured shipping) - Central hand in exchange (without exchange on request) - Gearbox overhaul of axles 1-6 - 12 months warranty Lrodog A Itqjpfx Akuol - 18 months possible for extra charge IMMEDIATELY more than 100 central hands in stock, different models. Just ask! Also an express overhaul of your KUKA central hand possible - from delivery 48 - 72 hours. In addition, we also offer the repair of ABB wrists.

Condition: new, Year of construction: 2026, Y axis drilling: 920 mm Lrodpfxel D Rw Eo Akusl Y axis sawing: 860 mm X axis: 3000 mm Z axis: 12 mm - 40 mm A axis: 360 ° min. Dimensions plate: (X) 300 mm x (Y) 120 mm x (Z) 12 mm Feed speed: 20 m/min Drill: 5 mm / 20 mm / 35 mm Milling tool: 8 mm Grooving saw: 90 mm x 3.5 mm Maximum groove depth with saw blade: 10 mm min. Hole diameter: 3 mm max. hole diameter: 35 mm motor power: 1,3 kW weight: 500 kg

Condition: good (used), Year of construction: 2008, travel distance X-axis: 630 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 510 mm, CNC control Mazatrol Matrix 2-fold pallet changing device NC-swivel rotary table 80-fold tool changer high pressure coolant through the spindle 20bar chip conveyor Technische Daten / technical details: Verfahrweg X / X-Travel 630 mm Verfahrweg Y / Y-Travel 765 mm Verfahrweg Z / Z-Travel 510 mm Schwenkbereich A-Achse / swivel range A-axis -120 - +30 ° Drehbereich C-Achse / rotary range C-axis 360 ° Tischgröße / table size 500x500 mm Werkzeugschaft / spindle taper SK40 Drehzahl / spindle speed 35-12000 UpM /rpm Eilgang / rapid feed 50 m/min Anzahl der Werkzeugplätze / tool places in ATC 80 fach / fold Antriebsleistung Hauptantrieb / drive capacity main drive 26 kW Lrsdpfotp Hgzex Akuol Gewicht der Maschine ca. / weight 17000 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 2007, sheet width 3050 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm 8.00 mm down holder 10 Stück cutting angle 0°40 - 2°20 Grad Lrodpfx Akoxaaghjuel 3340 mm work height max. 860 mm 575 mm Control GP 37W2 13 - 33 0 max. 315 bar oil volume 100 ltr. total power requirement 6.0 kW weight of the machine ca. 6030 + 1850 kg In good condition (!!) current new price including accessories approx. 110.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left ("GP 37W2") * Machine control including information display * Main display with 4 control panels * Control/operation of all functions * Max. 50 cutting programs with 15 sequences each - CNC electro-motorized backgauge * Travel speed 100 mm/sec. - CNC electro-hydraulic cutting angle adjustment - CNC electro-hydraulic cutting gap adjustment - Sighting device & cutting line illumination for viewing the scribe line * ??Shear cutting according to the optical scribe line - Manually adjustable table support plates, including ball transfer units * Grip recesses in the front support table - 2x freely movable foot switches - Operating instructions + circuit diagram SPECIAL ACCESSORIES included: - Backgauge system with 3 stations + separate control: * STATION 1 - AMADA conveyor belt with pneumatic sheet support device * STATION 2 - AMADA conveyor belt with pneumatic scrap deflector * STATION 3 - AMADA stacking device with scissor lift table device - Wooden box with spare knives - 1x AMADA extra-long side stop, with support foot * Length approx. 3.000 mm - 2x AMADA extra-long front support arms

Condition: new, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 106653, New ZH for KR30/60. This is a new part supplied by the manufacturer KUKA. Lsdpsxzynujfx Akusrl

Year of construction: 2022, condition: ready for operation (used), Guide channel sets for diameters: 22, 42, 47, 52, 62, 67, connected load: 2.4 kVA, weight: 1.8 tonnes. Featuring short changeover times, easy handling, maximum running smoothness, hydrodynamic bearings, 360° closed guide channels, reliable feeding of rotationally symmetrical profile material. The machine has only been used a little, an on-site inspection is possible. Lodpjwcf R Tsfx Akuerl

Condition: ready for operation (used), Year of construction: 2010, Workpiece diameter: 500mm, workpiece height: 730mm, travel X/Y/Z: 630mm/765mm/600mm, A-axis: -120°/+30°, C-axis: +/-360°, max. table load: 500kg, spindle interface: HSK-A63, speed: 18000rpm, rapid traverse: 52m/min, feed rate: 52m/min, rotary table diameter: 610mm, tool positions: 30, control: Mazak Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China. Lredsx Aunxopfx Akuel

Year of construction: 2015, operating hours: 13,792 h, condition: ready for operation (used), General Data Machine weight 8000 kg Control Unit Brand MAZATROL Model Preview 3 Main Drive Laser power 4.0 kW Workpiece Workpiece weight 900 kg Table Outer length 3000 mm Outer width 1500 mm Table load 900 kg Lsdpfox D I Twjx Akuorl This Fiber Laser Cutting Machine was manufactured in 2015. It features a 4.0 kW IPG Fiber Laser and MAZATROL PREVIEW 3 CNC Control, optimized for precision in cutting mild steel up to 9.0 mm and stainless steel up to 16.0 mm. The machine supports a table size of 3000 mm x 1500 mm and a max workpiece weight of approximately 900 kg. If you are looking to get high-quality cutting capabilities, consider the Mazak OPTIPLEX 3015 FIBER II machine we have for sale. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, controller model: Mazatrol 640M, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis: 1,740 mm Y-axis: 760 mm Z-axis: 660 mm Rapid traverse X-axis: 36 m/min Rapid traverse Y-axis: 36 m/min Rapid traverse Z-axis: 36 m/min Table size: 2,000 x 760 mm Table load capacity: 1,400 kg Distance from table surface to spindle nose: 160 mm - 840 mm Spindle speed: 12,000 rpm Lredpsya Dh Rjfx Akusl Main drive power (5 min): 18.5 kW Main drive power (30 min): 11 kW Tool Changer Number of tool stations: 30 Spindle taper: SK 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent stations: 110 mm Max. tool length: 350 mm Max. tool weight: 8 kg MACHINE DETAILS Control: Mazatrol 640M Interfaces: RS232, LAN, Floppy drive Dimensions & Weight Dimensions (L x W x H): 4,435 x 3,300 x 3,442 mm Machine weight: 11,500 kg Operating Hours as of 23.05.2025 Operating hours: 6,585 h Cutting hours: 8,300 h Auto cutting hours: 8,374 h EQUIPMENT Documentation/manual Chip conveyor Relocation detector Automatic tool length measurement system Preparation for partition wall for pendulum machining 4th axis Electronic handwheel EIA / ISO programming Synchronous tapping Through-spindle coolant, 5 bar

Condition: new, machine/vehicle number: 195f80ad09517628522e33a91, empty load weight: 7,300 kg, maximum load weight: 16,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear splash guards across the entire width Quarter-shell mudguards in front of 1st axle 1st pair of wheel recesses after cranking, recessed in the low bed in the tramline area, slanted towards the entrance, bottom length approx. 1600 mm, approx. 400 mm deep. Note! Frame in main beam area 400 mm higher than wheel recess. 2nd pair of wheel recesses recessed between the axles in the low bed in the tramline area, sloping towards the entrance, bottom length approx. 600, approx. 300 mm deep. Note! Frame in main beam area 300 mm higher than wheel recess. Widenings extendable to 3,000 mm (not in rear bevel) (However, the track width of the construction machinery or vehicles to be transported must not exceed outer frame width 2,550 mm) Widenings extendable to 3,000 mm, also in the wheel recesses below, foldable on the wheel recess extensions, (widening not in rear sloping) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 1 pair of lashing cut-outs in the front side member, recessed on offset, 10 tons each 4 pairs of lashing holes in the outer frame, 5 tons each (lashing strap attachment) 7 pairs of lashing points at the top and sides of the outer frame, 10 tons each 1 x front on offset 6 x in the drop deck First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Lrjdsi Ri Rvspfx Akuel Parabolic suspension with maintenance-free steel-rubber bearings Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable. Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front offset with steel/ checker plate covering Storage box recessed in the drive-over slope to the offset then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 6500 mm Drive-on ramps Steel ramps 2 800 mm long, 750 mm wide, can be moved sideways covered with wood with spring lift support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to

Condition: new, machine/vehicle number: 2dff0c136c85096f36822a0bb, empty load weight: 7,150 kg, maximum load weight: 16,850 kg, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with strong ball bearing slewing ring, storage box embedded in turntable front end Folding rear support 2 wheel chocks with holder Aluminum side collision protection Rear spray flaps across the entire width Widenings can be extended to 3,000 mm (not in the rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 3 pairs of lashing points each 10 to integrated in the floor at the front 6 pairs of lashing points at the top and sides, each 10 tons, integrated in the outer frame 1 x to the neck area remaining distributed in between Spacing not greater than 1200 mm 1 x rear slope 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) Lodpfji Riy Ejx Akuerl Towing equipment Trailer turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation axle load compensation (rocker compensation) Brake system 2-line compressed air brake system Colored line routing for easy servicing. Spring-loaded parking brake Incl. 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Wheels and tires 235 / 75 R 17,5 at the choice of the manufacturer Steel rims in twin arrangement, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front area steel floor, then with 70 mm softwood floor, steel/checker plate flooring in the wheel housing area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 8,200 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Covered with wood Incl. with spring lift support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be achieved while complying with the permissible axle/support and fifth-wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Paint finish Frame DB 7350 nova gray 10-year warranty against rusting through Drawbar Galvanized or black, at the manufacturer's choice Drive-on ramps Hot-dip galvanized Attention: Archive pictures!

Condition: new, machine/vehicle number: ede0610378cbe39cc4883251d, empty load weight: 24,000 kg, maximum load weight: 7,550 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction 1st pair of wheel recesses after steel platform recessed in the tramline area, inclined towards the entrance, length at the bottom approx. 1400 mm, approx. 400 mm deep. Note! Frame in main beam area 400 mm higher than wheel recess. If machines are to be driven where the overall height is to be checked, we request a technical data sheet for the machine types with exact details (if overall height is exceeded -> customer risk, approval required), (depending on the ground clearance under the machines, inserts in the wheel recesses may be required by the customer). Turntable with strong ball bearing slewing ring, storage box embedded in turntable front end Folding rear support 2 wheel chocks with holder Aluminum side bumper Rear spray flaps across the entire width Widenings can be extended to 3,000 mm (not in the rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed outer frame width 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 110 3 pairs of lashing points, 10 tons each, integrated in the floor at the front Incl. 6 pairs of lashing mushrooms at the top and sides, each 10 tons, embedded in the outer frame 1 x to neck area remaining distributed in between Distance not greater than 1200 mm 1 x rear slope 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included) Towing equipment Trailer turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Lredsi Ri Ryjpfx Akuol Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles which guarantee the effectiveness of the ABS! Wheels and tires 235 / 75 R 17,5 at the choice of the manufacturer Twin steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front area steel floor, incl. Afterwards with 70 mm softwood floor, steel/checker plate covering in the wheel housing area Rear slope with 70 mm softwood floor Low loading area incl. rear slope 8 200 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways covered with wood with spring lift support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. cannot be achieved. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany Incl. with

Condition: new, machine/vehicle number: d461243f559015adca5bb372c, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguard 1st axle with anti-spray flapsAnti-spray flaps behind 2nd and 3rd axle 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. Extensions extendable to 3,000 mm Storage compartment for wooden planks in the middle of the loading area Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes (40 lashing options) 1 pair of lashing cut-outs in the front side member on offset, 10 tons each Lsdpfei Ri Dljx Akuerl 4 pairs of lashing holes in the outer frame, 5 tons each (lashing strap attachment) 7 pairs of lashing mushrooms at the top and sides of the outer frame, 10 tons each 1 x front on offset 6 x in the drop deck First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes) 2 additional pairs of hinged lashing eyes, 10 tons each 1 x on offset (protrudes) 1 x embedded in the floor behind the last axle Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Make: Wabco, Knorr or Haldex Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front offset with steel/ checker plate covering Storage box recessed into the drive-over slope to the offset Then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 6,500 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Covered with wood Hydraulic via tractor power take-off with throttle, actuation on the left side in FR Hydraulic connection with SVK plug NW 10/3, incl. connection hose Country of registration / plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Warning sign according to ECE - 70 Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Drawbar Galvanized or black, at the manufacturer's discretion Drive-on ramps Hot-dip galvanized Attention! These are archive pictures!

Condition: new, machine/vehicle number: 628cde0fe99cc2d3c8eaa8dd8, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguard 1st axle with anti-spray flapsAnti-spray flaps behind 2nd and 3rd axle 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Extensions extendable to 3,000 mm Storage compartment for wooden planks in the middle of the loading area Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes (40 lashing options) 1 pair of lashing cut-outs in the front side member on offset, 10 tons each 4 pairs of lashing holes in the outer frame, 5 tons each (lashing strap attachment) 7 pairs of lashing points at the top and sides of the outer frame, 10 tons each 1 x front on offset 6 x in the drop deck First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) 2 additional pairs of hinged lashing eyes, 10 tons each Lsdpji Ri Ddsfx Akujrl 1 x on offset (protrudes) 1 x embedded in the floor behind the last axle Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension Drum brake axles, at the manufacturer's choice Axle/chassis laser-measured Reduction of tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's discretion Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Make: Wabco or Knorr Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front offset with steel/ checker plate covering Storage box recessed into the drive-over slope to the offset Then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 6,500 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways covered with wood with spring lift support Country of registration / plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Warning sign according to ECE - 70 Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Drawbar Galvanized or black, at the manufacturer's discretion Drive-on ramps Hot-dip galvanized Attention! These are archive pictures!

Condition: new, machine/vehicle number: f8fb99947a1c19bc4d63549ff, empty load weight: 6 kg, maximum load weight: 17 kg, overall weight: 24 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguard 1st axle with anti-spray flapsAnti-spray flaps behind 2nd and 3rd axle 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Widenings extendable to 3,000 mm (not in rear slope) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 1 pair of front lashing eyes recessed on offset, 5 tons each 7 pairs of lashing rings at the top and sides of the outer frame, 10 tons each 1 x front on offset 6 x in the drop deck First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) 2 additional pairs of hinged lashing eyes, 10 tons each 1 x on offset (protrudes) Lrodpei Riwfofx Akusl 1 x embedded in the floor behind the last axle Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's discretion with M&S marking Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable clutch heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Make: Wabco or Knorr Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front offset with steel/ checker plate covering Storage box recessed into the drive-over slope to the offset Then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 6,500 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Additional ramp safety device hinged at the bottom (to prevent the ramps from slipping sideways, not in conjunction with hydraulic side ramp displacement) covered with wood with spring lift support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be achieved while complying with the permissible axle/support and fifth-wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Coun

Condition: as good as new (ex-display), Year of construction: 2020, Grinding wheel for gear grinding, module - 3.74. Lrjdpfeq Nmkxox Akuol also can regrinding for another module.