Used Feldbinder Tsa 30 Bitumen 30.000 Liter for sale (28,341)

Condition: good (used), Year of construction: 1989, Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, pressure vessel, compressor tank -Pressure vessel: Compressed air tank on a mobile chassis -Container capacity: 250 liters Lhjdpfxsqva Nno Akyef -Operating pressure: max. 30 bar -Position: lying on transport frame -Dimensions: 2000/550/H1010 mm -Weight: 363 kg

Condition: used, Oil hand pump, oil cabinet, oil dispenser, oil pump, oil dispensing system, oil delivery device, oil station, oil centrifuge Lhjdpfx Akekahi Ajyef -Handover: in its current condition as inspected -Level indicator: missing, condition as shown in photos -Manufacturer: Tecalemit, mobile oil dispensing device with hand pump -Item No.: 1.520201.1 -Tank capacity: approx. 30 liters -Pump: hand-operated -Hose: can be shut off with tap -Dimensions: 500/440/H820 mm -Weight: 17 kg

Condition: excellent (used), Vötsch Type: VT 3050 Modules / Test Chamber Temperature Chamber Air-cooled Test chamber capacity 500 litres Temperature range -30°C / +100°C Temporal temperature fluctuation K ±0.5 Spatial temperature fluctuation K ±1.5 Temperature gradient K 3 Change rate Heating K/min 2.0 Cooling K/min 1.4 Heat compensation max. W 650 Calibration values +23°C +80°C Test chamber dimensions Width 710 mm Depth 590 mm Height 1250 mm External dimensions Width 940 mm Depth 1030 mm Height 1955 mm Sound pressure level db(A) Lhsdpfow S E N Tox Akyef

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Lhodpfswc Nvgsx Akyef Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2025, condition: new, functionality: fully functional, New device 12 months warranty Advantages of chilled ice water: + Consistently low discharge water temperatures + Precise dough temperature control year-round + Rapid gelatinization during mixing without ice + Softer doughs thanks to freshly chilled, liquid ice water + Precise dosing possible via water mixing and metering unit + All water-contact parts are stainless steel and require no cleaning + Hygienically perfect potable water Langheinz ice water units stand out for: + Constantly low water temperatures + High-performance refrigeration units + Refrigeration systems with expansion valve + Electronic ice bank controller + Stainless steel evaporator + Multiple stainless steel water heat exchangers + Insulated stainless steel ice water reservoir + Drain tap in the ice water reservoir + High flow rate + Compact dimensions + Easy-to-clean surface structure + Low energy consumption SPECIAL accessories, optionally available at extra charge: - Stainless steel wall console (for model L60 + L100): + €319 net - Machine table (for model L100): + €389 net - 3-way changeover valves Lsdpoivdvcofx Akyshf --- For water mixing and metering units with only 2 inlets (cold / hot) + €349 net Technical data: - Batch size (recommended): up to 30 liters - Continuous output*: 60 liters/hour - Peak cooling output*: 180 liters/hour - Ice bank: 20 kg - Cooling capacity (CECOMAF): 1.189 kW - Power supply: 230 V - 50Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow at 2 bar: 8 liters/min - Dimensions: 950 x 530 x 560 mm (LxWxH) - Net weight: 60 kg - Energy consumption for 100 liters: 1 - 2 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2024, condition: new, functionality: fully functional, New machine with 24 months warranty Stainless steel model Advantages: + mobile machine, with locking rollers + completely made of stainless steel + Production and preparation of choux pastry, pastry cream, chocolate, fondant, fruit jam, coating, filling, as well as for any product that requires even heating and mixing + Thermal oil circulates in the double tank wall, designed for safe and easy use + triple wall for optimal thermal insulation + with side and bottom wipers + electronic thermostat for setting the cooking temperature + with timer + manual / automatic operation possible + digital temperature display + boiler is simply tilted via crank wheel for emptying (optional: with drain cock) + two working speeds + safety switch in case of overheating + fast spare parts supply within 1-2 working days SPECIAL accessories, optionally available at extra charge: - Discharge tap, for quick, easy emptying: + 860,-- € net - Machine with frequency converter, for stepless stirring speed: + 1.275,-- € net (delivery time + 5 to 6 weeks) Technical data: - capacity: 30 liters - max. temperature: 150°C - thermal oil volume: 12 liters - heating power: 4 kW - motor power: 0,37 kW / 0,45 kW (1st / 2nd speed) - Connected load: 400 V - 3Ph - 50Hz - 16A CEE plug - dimensions: 960 x 725 x 1530 mm (WxDxH) - filling height: 1100 mm Ljdpfx Aeivdnvekyjhf - Net weight: 121 kg

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 Lsdpfx Aewc Ri Iekyohf 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Lhedjwc Rk Eopfx Akyef Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: excellent (used), mileage: 529,650 km, power: 315 kW (428.28 HP), first registration: 10/2018, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,450 mm, fuel: diesel, fuel tank capacity: 900 l, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 9,700 mm, total width: 2,600 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space volume: 1 m³, Year of construction: 2018, Technical Information Lodpey A Tgiefx Akyjhf Number of cylinders: 6 Engine displacement: 12,902 cc Axle configuration Maximum front axle load: 8,000 kg Rear axle 1: Max. axle load: 11,500 kg Rear axle 2: Lift axle; Max. axle load: 7,500 kg Weights Unladen weight: 13,515 kg Payload: 13,485 kg Gross vehicle weight (GVW): 27,000 kg Maintenance, History and Condition APK (Periodic Technical Inspection): valid until 11/2026 Technical condition: very good Visual condition: very good Further Information Contact Maarten Busser or Niels Busser for more information.

Year of construction: 2018, condition: like new (used), Manufacturer: Leybold Type: DIP 30000 Lodpfx Akohmbfnjyshf Product No.: 22235 Status: unused in original packaging Warranty: 6 months Delivery time: ex stock

Condition: good (used), Dimensions: - Width: 1500 mm - Depth: 1500 mm - Height: 2400 mm (without base) Lhsdpfjyw Raiex Akyef Equipment: - Rectangular manhole 320 x 420 mm - Residue drain NW40, Fredrich - Clear drain NW40, Fredrich - Sampling point - Level indicator - Upper hatch 320 x 420 mm - Connection for venting and aeration

Condition: good (used), Dimensions: - Width: 1750 mm - Depth: 1500 mm - Height: 2400 mm (without base) Equipment: Ledpfxeyw Racs Akyjhf - Rectangular manhole 320 x 420 mm - Residual drain NW40, Fredrich - Clear drain NW40, Fredrich - Sampling point - Level indicator - Top hatch 320 x 420 mm - Connection for filling and venting

Condition: good (used), Dimensions: - Width: 1750 mm - Depth: 1500 mm - Height: 2400 mm (without base) Equipment: - Oval manhole - Residual outlet NW40, Fredrich Lhedpfxoyw N U Es Akyjf - Clear drain NW40, Fredrich - Sampling point - Level indicator - Connection for venting and aeration

Condition: used, empty load weight: 5,700 kg, axle configuration: 3 axles, first registration: 05/2014, suspension: air, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, 3-axle stainless steel tank semi-trailer, make Berger/Santi - First registration: 06.05.2014 - Number of axles: 3 - Suspension: Air - Axle type: SAF - Brakes: Disc - Length: 10,650 mm - Width: 2,550 mm - Height: 3,600 mm - Unladen weight: 5,700 kg - Superstructure manufacturer: Santi - Tank material: Stainless steel - Total tank volume: 30,000 L - Tank compartments: 3 - Insulated - CIP cleaning Ljdpfoyv Hapox Akyjhf

Condition: used, mileage: 414,035 km, power: 221 kW (300.48 HP), first registration: 06/2005, fuel type: diesel, tire size: 315/80/22.5, fuel: diesel, color: other, gearing type: mechanical, emission class: euro3, suspension: steel-air, Year of construction: 2005, Equipment: ABS, air conditioning, cruise control, electric window regulation, fog lights, = Additional Options and Accessories = - ADR (European agreement concerning the international carriage of dangerous goods by road) - Aluminum fuel tank - Low noise (noise-reduced) - Speed limiter - Air suspension - Radio/CD player - Electrically adjustable side mirrors - Sun visor - Analog tachograph = Further Information = Axle Configuration Tire size: 315/80/22.5 Brakes: Disc brakes Front axle: Suspension: Leaf spring Rear axle 1: Suspension: Air suspension Rear axle 2: Lift axle; Suspension: Air suspension Weights Unladen weight: 10,140 kg Payload: 15,860 kg Gross vehicle weight (GVW): 26,000 kg Ljdpfxoyk A N Uo Akyehf Condition Damages: none Identification Registration number: TEL947

Condition: good (used), Year of construction: 2004, functionality: fully functional, operating hours: 39,000 h, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, total height: 5,600 mm, total length: 9,000 mm, overall weight: 6,000 kg, controller model: Heidenhain Mill Plus IT, For sale is a 5 axis machining center of the Makre DMU and type 50 eVolution Please note the GMN high frequency spindle spindle HCS 30.000 /15 and the 92-fold tool changer The machine is in good condition and fully functional Technical data Year of construction: 2004 Operating hours: approx. 39,000 h Control system: Heidenhain MillPlus IT Table size: approx 500 mm ⌀ Traverse paths: X-axis: 500 mm Y-axis: 420 mm Z-axis: 380 mm A-axis: 0-180° C-axis: 360 ° Tool holder: HSK 50 Spindle speeds: max: 30,000 1/min Frequency: 500 Hz Power: 15 kW Tool places: 92 NO chip conveyor Space requirement according to drawing: 9,000*5,600 mm Transport dimensions: 2,800*3,700*2,800 mm Weight: 6,000 kg On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Fzho0bc Lsdpfx Aetyit Eekyshf Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: excellent (used), Year of construction: 2015, total power requirement 5,5 kW Lhodpfx Aoyiu N Rskyjf

Condition: used, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 09/2008, next inspection (TÜV): 04/2026, total width: 2,280 mm, total height: 2,500 mm, Equipment: crane, KLAAS-ALU Cranes Trailer with 2 axles Ljdpfxewnu Hhe Akyjhf Type: K 20/30 TS Permissible total weight: 3500 kg Axle load front: 1750 kg Axle load rear: 1750 kg 30 meters hook height 20 meters horizontal reach 4x hydraulic support points Load capacity: 1300 kg Year of manufacture: 2008 Operating hours: 2791 h Equipment: + Diesel drive + Wheel drive (mover) + Remote control We are happy to support you also with financing/leasing through our partners. All information without guarantee. Errors and intermediate sales reserved.

Condition: excellent (used), Here we offer a temperature shock test cabinet. White Temperature Shock Test Cabinet Air Cooled Specification: Temperature range hot chamber +60°C ... +220°C Temperature range cold chamber -10°C ... -80°C Change hot/cold chamber 10 s Temperature constancy ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width ( without and with door hinge ) without....approx. 1820 mm with....approx. 1850 mm Depth ( without and with test room door ) without....ca. 900 mm with....ca. 1155 mm Dimensions of the lifting basket ( test chamber ) height 450 mm, width 500 mm, depth 600 mm volume 130 liters Test space load max. 20 kg Test chamber floor load max. 20 kg Cooling water pressure min. 2 ... max. 6 bar Max. Backup fuse 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of unit approx. 65 dB(A) Cooling cascade water cooled Connected load: 3/N/PE/AC 400V ±10% 50Hz /14,0 kW nominal current 26,0 A Refrigerant R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Ljdpfx Akelgux Asyohf Further questions we can answer on the phone for you.

Condition: new, GMN TSA 26x200 L 100120 SP: 39300-40000 rpm grinding spindle, unused in opened original packaging, 100% functional, scope of delivery as per photos Lsdpfsi D U Udjx Akyehf

Condition: new, GMN TSA 26x200 L 122526 SP: 39300-40000 rpm grinding spindle, unused in opened original packaging, 100% functional, scope of delivery as per photos Ledpfx Aksi D U Uhsyjhf

Condition: new, GMN TSA 26x200 L 184039 SP: 39300-40000 rpm grinding spindle, unused in opened original packaging, 100% functional, scope of delivery as per photos Lsdpfxji D U Ulj Akyohf

Condition: new, GMN TSA 26x200 L 199209 SP: 39300-40000 rpm grinding spindle, unused in opened original packaging, 100% functional, scope of delivery as per photos Lhjdpfx Akei D U Upoysf

Year of construction: 2025, condition: used, New: Yes Field of application: Construction Please contact Kristoff Van Havere for more information - 12 Volt pump with automatic pistol - Lockable - loadable with forklift - 220 liter and 430 liter available Lhsdpfow Thkcox Akyof - Dimensions 220 litre: H: 700 L: 800 W:600 mm - Dimesions 430 litre: H:800 L:1195 W:790 mm - Weight: 35 kg - 220 liter: 620€ net - 430 liter: 788€ net

Condition: used, Name: Powder Feeder Manufacturer: K-Tron / Coperion GmbH Type: K-ML-FB-130QC Lhjdpsiv Ic Esfx Akyof Year built: Unknown Speed: Mixer speed: 5,6 rpm Content: 75 liters Driving force: 0.25kW. - Mixer drive 0.25 kW Dimensions: Length 800mm x Width 700mm x Height 1200mm Empty weight: 100 kg Technical doc.: No Message: Mixing drive 0,25 kW, speed 5,6 rpm Condition: Used Price: On demand