Used Finkl Sav35 - 3 Deck Livestock - Water & Ventilation ... for sale (66,319)

Year of construction: 2025, condition: new, functionality: fully functional, Available in different sizes and capacities. Domino is a professional floor stove designed to meet the needs of simple and versatile use. It is ideal for baking bread, desserts and pizzas in the tray. The Domino series is especially suitable for bakeries, pastry shops, pizzerias and hotels. Basic characteristics: Baking temperature up to 350°C Height of the working floor: 18 cm (optional: 25 cm) 3 power levels available: STANDARD, MAXIMUM and TRAY PIZZA (on some models at an additional cost) New design suitable for blending into the interior Number of stackable floors: from 1 to 4 Fydrofire® Fireclay Plates Fydrofire® floor slabs provide greater reliability and even heat distribution Standard on all models. Control Panel & Software TOUCH electronic control "READY TO BAKE" function – the stove is ready for the set temperature with lower energy consumption "RECOVERY TIME" function – you always know how much time is left until the furnace is ready Access password management – guarantees consistency in baking by restricting access to recipes USB 2.0 port for fast and secure data transfer Energy Efficiency POWER MANAGEMENT: energy-saving mode for floors and steam generators, with 3 different modes according to the type of baking OPT display – shows the efficiency of the furnace use, enables conscious use and savings SLEEP function – to save during periods of inactivity Temperature control using two probes per floor Minimum insulation thickness: 100 mm Glass that reflects heat Steam generator (optional) with optimized performance and tuning from the panel Steam generator on/off button Automatic switching on and off by days and weeks Automatic shutdown in case of prolonged inactivity Display of time for conscious use of the stove Ready to connect to a power limiter device Construction Stainless steel front and hood Side panels made of prepainted sheet metal From the Squirrels, Squirrels, Squirrels Independent heater at each end of the floor Concrete and fireclay baking plate Lightweight aluminum frame for easy transport and installation Automatic control of the steam ejection damper Doors with upward opening – saves space Double Spring Doors Easy and quick cleaning of the glass without removing it Rsdpjwhdpxjfx Amgeu Large stainless steel handle, insulated plastic handles for safe and ergonomic handling The internal dimensions of the floor correspond to the actual width of the opening Double lights per floor, with on/off switch Control panel on the right. Technical characteristics: Floor: 3 Floor entrance height: 18 cm Number of trays 60x40: 6 pieces per floor Floor dimensions width x depth: 124 x 122 cm Oven dimensions WxDxH: 163 x 161 x 241 cm Power: 13.6 kW per floor Weight: 185 kg one floor

Condition: used, Year of construction: 2010, functionality: fully functional, Max. working temperature 90° C. Max. working pressure: 2 kg/cm². Power 3.000.000 kcal Fuel: wood waste The MTN boiler is a hot water generator that uses sawdust as fuel, with "AUTOFOCO" type burner loading. Redjtywzqspfx Amgju The boiler is of horizontal type Tubular plates and shell are made of thick carbon steel sheet. The core is covered with refractory cement with a high percentage of alumina. At the rear there is a cast iron grate for burning solid pieces of wood, calculated for an output equal to 60% of the rated output of the boiler. The tube bundles are made of carbon steel. The base incorporating the hearth is of large dimensions, to allow the burner to be mounted with a plug. The boiler is supplied with an air distribution manifold. The boiler body is insulated with mineral wool and covered with cast iron Accessories: - 1 Adjustable thermostat - 1 safety thermostat - 1 safety thermostat with manual start - 1 thermometer - 1 hydrometer - 1 combustion control device - 1 thermostatically actuated valve positioned in the flue tube MANUAL FEED GRILL is a fixed grill made of special nodular cast iron bars, fixed in refractory material, easily interchangeable. 1 Complete electrical components, motor protections, contactors. 1 Complete set of wiring accessories 1 General circuit breaker 1 Power supply for auxiliary circuits 1 Circuit diagram 1 Pressure gauge 2 Temperature probes 1 Dust suction system consisting of a fan with belt transmission, with decanter cyclone, boiler-cyclone connections, cyclone-fan, fan-fan, fan-smoke stack, in painted carbon steel. 1 Chimney

Condition: ready for operation (used), Year of construction: 1984, Deckel Copy Milling Machine Model KF 3 S Redszap U Ajpfx Amgsu Year of manufacture: 1984 Table surfaces: 600 x 555 / 620 x 750 mm Y-axis travel: 150 mm Z-axis stroke: 380 mm X-axis stroke: 150 mm Drive: 3 kW Roughing spindle Finishing spindle Locking arm Control lever with cable Tracing stylus holder Collets Weight: 2400 kg Price: EUR 2,000—plus VAT, ex works

Condition: ready for operation (used), Universal / Tool milling machine DECKEL FP 1 & 3-axis Heidenhain digital display Redpsy Ummmsfx Amgju -Very well-maintained, original condition -Travel ranges X/Y/Z 300x150x340mm -Speed range 40-2000 RPM -Automatic feeds / inputs in two axes -Vertical / horizontal milling capability -Tool holder ISO 40 -Fixed swivel table -3-axis Heidenhain digital display -Coolant system -Chip tray -Documentation Dimensions: L x W x H 1.1 x 0.8 x 1.7 meters / Weight 700 kg Errors and omissions excepted.

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Redpfx Aov R E Rdsmgju Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: ready for operation (used), Tool Milling Machine / DECKEL FP 2 with 3-Axis Digital Readout - Heidenhain ND 780 Rjdpfx Amoy R Emqsgeu - Machine in well-maintained original condition - Travel X/Y/Z 450x230x400mm - 3-axis digital readout Heidenhain - Automatic feeds / rapid traverses on all three axes - Spindle speed range 40-2000 rpm - Universal tilting, swiveling, and rotating table - Horizontal / vertical milling setup with sliding head - Tool holder ISO 40 - Coolant system - Various tool holders & collets - Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1600 kg Errors / input mistakes reserved

Year of construction: 1982, condition: refurbished (used), Universal tool milling machine Make: DECKEL Model: FP 3 Active year of construction: 1982 - overhauled, new painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue machine no.: 2201-5539 with warranty geometric acceptance with test report accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 650 x 370 mm (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread M 16 Redpfxspn Rgvs Amgsu - Central lubrication, manually operated - coolant device - Operating instructions used as seen The machine corresponds technically the state of the art of the year of construction.

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 LV Active Year of manufacture: 1988 - overhauled, repainted RAL7035 light gray / RAL7012 basalt gray RAL5008 gray blue Mach. no.: 2309-0146 Milling head type: 2271 Milling head number: 700-0887 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 - Fixed table 1,390 x 550 mm (T-slot: 16 mm) - Vertical milling head SK 40 with drawing thread M 16 - Central lubrication, manually operated - Coolant system Redpfx Aetdnb Ejmgsu - Operating instructions Used as seen The machine is technically as it was built at the time.

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 L Active Year of manufacture: unknown - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2302-2319 Milling head type: 2271 Rjdpoh Rv U Esfx Amgju Milling head number: 700-0883 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Central lubrication, electric - Coolant system - Operating instructions - Drill grinding device with diamond disk -used, as seen-

Condition: reconditioned (used), Title:RHOSS TCHVBZ 2630 – 621 kW Water-Cooled Chiller | Bitzer Screw | Refurbished Headline: Industrial-grade Rhoss water-cooled chiller, fully refurbished and field-tested. Equipped with 2× Bitzer screw compressors, Carel Smart Controller, and energy-efficient R-134a refrigerant — engineered for demanding industrial cooling applications. TECHNICAL SPECIFICATIONS Specification Value Brand / Model RHOSS TCHVBZ 2630 Type Water-Cooled Chiller Condition Refurbished / Tested Cooling Capacity 621.6 kW (534,500 Kcal/h) Refrigerant R-134a Compressors 2 × Bitzer Screw CSH8581-125Y-40P Evaporator Shell & Tube – DN150 Connection Condenser Shell & Tube – DN125 Connection Control System Carel Smart Controller Dimensions (mm) 4070 × 1300 × 1960 Weight 3,297 kg Location Seyhan / Adana, Türkiye TECHNICAL OVERVIEW Industrial-grade Rhoss water-cooled chiller — fully refurbished, field-tested, and verified to meet international performance standards. Equipped with high-efficiency Bitzer screw compressors and a Carel Smart Controller for stable, energy-efficient, and long-term operation. Optimized for demanding industrial applications where reliability and uptime are critical. WHY CHOOSE THIS UNIT Fully refurbished and performance-tested Equipped with high-efficiency Bitzer screw compressors Reliable and durable for continuous industrial operation Energy-efficient R-134a refrigerant Backed by professional after-sales service and spare parts inventory Fast commissioning and on-site technical consultation available ABOUT ÖZSAYIN COOLING SYSTEMS With more than 40 years of experience in industrial refrigeration, Özsayın Cooling Systems provides complete turnkey solutions: Supply of new or refurbished chillers (10 – 2,500 kW) Short- and long-term rental options On-site installation, commissioning, and maintenance Extensive spare parts inventory for global brands (Carrier, Trane, Daikin, York, Bitzer, Rhoss, Climaveneta, McQuay, etc.) 24/7 technical service and engineering consultancy RENTAL OPTION AVAILABLE This unit is available for short- or long-term rental under flexible terms. Contact us for a customized quotation and technical consultation tailored to your project requirements. Rjdpfx Ajy Umf Nsmgsu CONTACT Mr. Samet Özsayın – Özsayın HVAC Technologies Seyhan / Adana, Türkiye Last Updated: 26.08.2025 HASHTAGS / KEYWORDS #ozsayin #bitzer #rhoss #watercooledchiller #industrialchiller #r134a #coolingsolutions #hvacturkey #chillerrental #refurbishedchiller #screwcompressor #carelcontroller

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 20031, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, input voltage: 380 V, We offer this used Deckel Contour 3 tool milling machine, year of manufacture 1987. Control system: 6004 50 009302 00 Serial number: 20031 Year of manufacture: 1987 Wiring diagram: 6003 90 077302 00 Operating voltage: 380 V Frequency: 50/60 Hz Rjdpfsy Hfc Rox Amgeu Rated current: 23 A Control voltage: 24 V Maximum fuse: 35 A The machine is equipped with a rotary table and a tool changer. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: refurbished (used), Year of construction: 2000, table length: 1,000 mm, table width: 1,000 mm, operating pressure: 3,800 bar, (Pictures in current state) - prepared for two cutting heads (1x pure water) - Control unit will be renewed - will be sandblasted and repainted - Pump optionally available Rodenab Rlspfx Amgsu - available after order in 12-16 weeks Special features: - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 2006, table length: 3,500 mm, table width: 1,500 mm, Pictures are in current condition - two Z-axes - 1 x 45° Schnedikopf , 1 x 2D - control unit will be renewed - will be sandblasted and repainted - pump optionally available - available in 12-16 weeks after order Rodpfenab Rzox Amgsu Special features: - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 9558, Used fully functional WJS waterjet cutting machine with KMT SLIV 50 HP pump. Machine is in disassembled condition and can not be inspected. Rodpfei Hckrsx Amgeu Installation and commissioning will be done by us and is not included in the price. The machine can also be completely overhauled ( new control cabinet, new control and new CE. This would mean a surcharge of about 50.000€)

Condition: excellent (used), Deckel FP 3 Milling Machine 3-axis digital readout FAGOR Innova 30i-M, new 500 mm 300 mm 380 mm Rsdpfx Aeymffksmgju SK 40 drawbar thread S 20 x 2 Vertical milling head 40 – 2,000 rpm, 18 speeds Universal table 800 x 420 mm 12 mm approx. 1,500 kg approx. 1,400 x 1,800 x 1,900 mm Centralized manual lubrication Coolant system Operating manual Completely overhauled by Harich in 2000!

Condition: not inspected (used), Please see technical details on photo. Rjdpfxshvzxzj Amgsu

Condition: reconditioned (used), Year of construction: 1975, functionality: fully functional, 3-axis digital readout FAGOR Year of manufacture: 1975 Travel: X 500 Y 200 Z 400 Speed range: 40 – 2000 rpm With the following accessories: Universal table 660 x 380 mm clamping surface Vertical milling head Extendable quill Milling cutter guard enclosure Rodpfxeyw H Eue Amgju Machine lamp Various tool holders SK 40 Chip tray Coolant system 4 pcs. machine feet Operating manual THE MACHINE IS IN VERY GOOD CONDITION !!!

Condition: used, Year of construction: 1979, x-travel 800 mm y-travel 300 mm z-travel 400 mm turning speed range 25 - 2.000 U/min Rjdpfx Amowwwqhogeu power capacity 4 kW feed 5 - 500 m/min rapid traverse 1,5 m/min work table: 1.000 x 700 tool taper SK40 weight 1,8 t dimensions of the machine ca. 2,50 x 2,40 x 2,00 m The machine is in good condition. The digital display is defective (the scales are ok) Extra interchangeable milling head. No accessories.

Condition: excellent (used), Tool milling machine DECKEL FP 1, three-axis digital readout TNC 113, from educational institution Redpoyln Irofx Amgeu - CE marking - Travel X / Y / Z 300x160x340 mm - Heidenhain TNC 113 / plug-in control - Spindle speed range 40 - 2000 rpm - Infinitely variable feed in all three axes - Rapid traverse in all three axes - Vertical head adjustable by 100 mm - Vertical-horizontal milling facility - Tool holder ISO 40 - Drive power 1.5 / 1.9 kW - Fixed angle table - Chip tray - Coolant system - Work light - Documentation Dimensions: LxWxH 1.3x1.2x1.7 m / Weight: 950 kg Errors and omissions excepted

Condition: reconditioned (used), Year of construction: 1984, Universal Tool Milling Machine DECKEL FP 3 With 3-axis active digital display Heidenhain TNC 11 Year of manufacture: 1984 Travel: X 500 / Y 300 / Z 400 mm Speed range: 25 – 2500 rpm Rjdpfx Ajxuh Rdsmgou Including the following accessories: - Rigid angle table, 850 mm x 400 mm clamping surface - Swiveling rotary table Ø 450 mm with dividing disks - Slotting head - Movable vertical milling head - Extendable quill for drilling - Infinitely variable feed via potentiometer - Various milling arbors SK 40 / S22 x 2 - Chip tray - Automatic central lubrication pump for X, Y, Z axis - Machine lamp - Coolant system - 4 machine feet - Operating manual

Condition: used, Year of construction: 2021, machine/vehicle number: 70602008, High-performance industrial vacuum evaporator designed for the treatment and volume reduction of industrial wastewater and process liquids. This system uses heat pump technology combined with vacuum evaporation to achieve efficient distillation at low temperatures. Technical Specifications:Capacity (distillate production): approx. 12,000 – 12,700 L / 24 h Technology: Heat pump vacuum evaporation Operating mode: Fully automatic continuous operation with PLC control (Siemens) Refrigerant: R134a Installed power: approx. 114 kW Operating temperature: 35 – 45 °C Distillate temperature: 37 – 47 °C Rjdsyu Sfajpfx Amgsu Concentrate temperature: 35 – 45 °C Operating pressure: 6 – 8 kPa (vacuum) Dimensions and Weight Total length: approx. 5600 mm Total width: approx. 1500 mm Total height: approx. 3800 mm Weight: approx. 4,000 – 5,000 kg Condition: Used – very low operating hours. EVALED AC R 6 (vacuum evaporator / crystallizer “R” scraped type) is about 6 t/day class. Veolia EVALED AC R6 FF3 Vacuum Evaporator / Crystallizer – Wastewater Treatment

Year of construction: 2017, condition: ready for operation (used), Cutting heads: 2, cutting head type: AWJ 2D, abrasive feed: system SM4000, pump type: KMT Streamline SL-VI Standard, max. pump pressure: 3800bar. Table dimensions X/Y: 3200mm/1710mm, cutting dimensions X/Y: 3010mm/1510mm, travel range X/Y/Z: 3010mm/1510mm/250mm, travel speed: 12m/min, cutting head distance range: 90mm-450mm, positioning accuracy: +/-0.075mm, repeatability: +/-0.035mm, control: Fanuc 0i-MF, operating hours: 4866h. Includes oil cooler, water treatment, and safety zone. Documentation available. On-site inspection possible. Redpfexp Rcfox Amgeu

Condition: good (used), Offered for sale is a partially overhauled DECKEL FP1 Aktiv universal milling machine, equipped with a 3-axis Heidenhain digital readout TNC 113 and a dividing rotary table with a three-jaw chuck. Thanks to its compact design, this machine is ideal for smaller hobby workshops or garages. Manufacturer: DECKEL Model: FP1 Machine no.: 2102-3314 - Travel X/Y/Z 300 x 160 x 340 mm - Spindle speed range 40–2000 rpm - Stepless feed in all three axes - Rapid traverse in all three axes - Vertical milling head - 100 mm adjustable vertically - Horizontal milling attachment - 3-axis Heidenhain digital readout TNC 113 - Coolant system - Dividing rotary table with a three-jaw chuck Total power requirement: 1.9 kW Machine dimensions (L x W x H): 1.30 x 1.10 x 1.60 m Weight: approx. 850 kg Rodpfexmgguox Amgeu Price is quoted net, ex-works, loaded. Condition: Used.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1983 Machine no. 2102-2444 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm Redpfxjtwlwze Amgeu >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1983 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this little gem under power on site.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1985 Machine no. 2102-2867 >> Turn-tilt-swivel table (newly planed) >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Redpfx Aet Aarpsmgju Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1985 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. An oil change has been carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this machine under power on site.