Used Formlabs Fuse 1+ 30W for sale (79,205)

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 Ijdpfozu Nvzsx Ai Rjtk - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Condition: used, Year of construction: 2020, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 155,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Isdpozu S U Hofx Ai Rstk Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Weight approx.: 155,000 kg Rotation height max.: 2,100 mm Table diameter: 3,800 mm Swing: 3,800 mm Control: Siemens SINUMERIK 840D sl Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Year of construction: 2,020 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, type of input current: three-phase, input current: 30 A, input voltage: 400 V, input frequency: 60 Hz, We offer this ready for use Summa F1612-1 flat-bed cutting machine, year of construction 2019. Model: F1612-1 Iodpfjzrtfhjx Ai Rjtk Serial number: 101708-14001 Supply voltage: 208/230/400 VAC Phase: 3 ph Frequency: 50/60 Hz Current: 30/15/15 A Country of manufacture: Belgium No software included If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, laser power: 30 W, type of cooling: air, total width: 404 mm, total height: 590 mm, total length: 556 mm, overall weight: 35 kg, table height: 100 mm, table length: 350 mm, table width: 170 mm, space requirement width: 404 mm, space requirement height: 590 mm, working height: 100 mm, space requirement length: 556 mm, working width: 350 mm, Professional Laser Engraving Machine Magic L3 30W - Great Opportunity! For sale is our high-quality Magic L3 laser engraving machine with a 30W fiber laser source. TECHNICAL DATA: • Model: Magic L3 30W (Red Technology) • Laser Type: 30W Fiber Laser • Original Price: 15,490 EUR (see manufacturer's website) • Working Area: 350 x 100 x 170 mm (W x H x D) • Engraving Speed: up to 4000 mm/s • Dimensions: 556 x 404 x 590 mm • Weight: approx. 35 kg ✅ CONDITION & USAGE: • Period of Use: February 2022 to September 2025 • Low Usage: Used only a few times per day for short periods Itedpsznnctjfx Ai Rek • NO industrial continuous operation! • Well-maintained and fully functional • Automatic safety cover functions perfectly • Adaptive cooling system runs quietly and reliably IDEAL FOR: • Jewelers and goldsmiths • Engraving on gold, silver, stainless steel, aluminum, brass • Various engraving techniques: hatching, contour, blackening • Serial numbers, logos, texts, graphics SCOPE OF DELIVERY: • Magic L3 laser engraving machine • MagicArt 7 software (easy to use!) • Original accessories • Additional accessories available (see my other listings) ⭐ SPECIAL FEATURES: • Automatic safety cover (closes before laser operation) • Exhaust set connection available • Supports DXF, PLT, SVG, DGN, JPEG, PNG, BMP • Automatic number generation for series • Very low maintenance and long-lasting • German software interface possible PRICE: 8999 EUR (negotiable) A fair offer for a professional device in top condition! CONTACT & INSPECTION: • Inspection and demonstration possible by appointment • Pick-up only / Shipping by arrangement • VAT can be shown on request If you are interested or have any questions, please contact me! Keywords: Laser engraving, fiber laser, engraving machine, jeweler, goldsmith, jewelry engraving, metal engraving, Red Technology, Ingraser, marking laser

Condition: used, Year of construction: 2007, operating hours: 11,300 h, Equipment: all wheel drive, MAKE: HITACHI TYPE: ZX130W YEAR: 2007 CE MARKED: YES OPERATING HOURS: 11,300 HOURS TIRES/UNDERCARRIAGE: 80% POWER: 88KW ENGINE: ISUZU 4BG WEIGHT: 15,450 KG OPTIONS: BLADE AND OUTRIGGERS FRONT-ARM BOOM AIR CONDITIONING COMPLETE PIPING SORTING FUNCTION HYDRAULIC QUICK COUPLER BUCKET ENGINE PROBLEM. RUNS AND OPERATES, BUT SMOKES AND LEAKS OIL. Itjdpfx Aiezvaags Rjk KORENBLIK MACHINERY BV. VEENWEG 56 7336AG APELDOORN THE NETHERLANDS VAT ID: NL864089764B01

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V Iodpeznr Sxefx Ai Retk - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Year of construction: 2026, The CNC plasma burner with a water table is a device designed for shape cutting of elements from a sheet of metal (in any shape). This machine is characterized by extreme simplicity and ease of use. Our CNC cutter guarantees repeatability and high cutting accuracy (0.1 mm), thanks to which burnt shapes can be transferred directly to the next stage of production. The water table ensures low consumption of consumables, raw materials and low gas emissions. No need to use fume and flue gas extraction. Why is it worth it? water table no need to use smoke and fumes extraction small size of the machine allows it to be placed anywhere THC voltage height adjuster precise setting of the torch a very precise cut requiring no further processing plate detection system convenient control panel intuitive machine operation can cut and gouge steel machine training at the buyer's/seller's premises a library of standard geometric shapes Itjdpjg Nknyjfx Ai Rek Characteristics and equipment Workspace 1500 x 3000 Y axis range 140 mm (clearance) The use of a rigid and stable structure Water Table Voltage height regulator Torch height adjustment system Torch height and stabilization sensor FastCAM program - in Polish with a license USB port and internal and external memory Friendly user interface - simple operation even for people who have never worked in programs like FastCAM Import of drawings in *.txt format from any type of program (e.g. AutoCAD, SolidWorks, etc.) MAKRO – a library of standard geometric shapes. This allows you to create figures without having to draw. NESTING – automatic arrangement of elements on the sheet DEMO - Shows the work cycle (path) without turning on the plasma or oxygen source The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: good (used), Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, power switch, power disconnector, auxiliary switch, main switch, disconnector, fuse-switch disconnector -Manufacturer: Eaton, NH fuse switch disconnector 20 A -Type: TO-2-1 -Number: 7x load break switches available -Price: per piece -Dimensions: 65/65/H110 mm Ijdozrtd Depfx Ai Rstk -Weight: 0.2 kg/pc.

Condition: used, machine/vehicle number: 008710, Max. machining width: 1300 mm Itjdpfx Aeztat Uei Rek Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 3 Nr

Condition: used, Year of construction: 2015, operating hours: 55,058 h, functionality: fully functional, machine/vehicle number: 1125855, travel distance X-axis: 508 mm, travel distance Y-axis: 496 mm, travel distance Z-axis: 394 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 508 mm, feed length Y-axis: 496 mm, feed length Z-axis: 394 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, workpiece weight (max.): 113 kg, table width: 380 mm, table height: 120 mm, table length: 660 mm, table load: 113 kg, rotational speed (min.): 1 rpm, rotational speed (max.): 15,000 rpm, spindle speed (min.): 1 rpm, spindle speed (max.): 15,000 rpm, distance table to spindle center: 300 mm, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, input current: 40 A, control cabinet height: 1,600 mm, control cabinet length: 500 mm, control cabinet width: 485 mm, space requirement height: 2,639 mm, HASS DM-1, 15,000 rpm and 20 bar through spindle. Equipped with 18 tool pockets, Renishaw probe and tool probe (year 2015), and MIDACO 2-pallet changer (dimensions: 560 x 380). Machine external dimensions: 2135 x 2368 x Hmax 2639. The machine is preserved and in working condition. Supplied with user manuals and documentation. Backup of the pallet system program is included on USB. Isdpfx Aisxfh Rls Rjtk

Condition: excellent (used), RMS Vibrations Testing System SW 8100/1 Manufacturer: RMS Type: SW 8100/1 Machine Type: Electro-dynamic Vibration and Shock Testing System Design: With sliding table, head expander and amplifier For sale is a used electro-dynamic vibration and shock testing system from the manufacturer RMS. The system is suitable for vibration, shock and fatigue testing in the areas of development, quality assurance, research, material testing and product testing. Technical Data Sinusoidal Force: 24 kN Random Force: 20 kN Shock Force: 28 kN Displacement: 1.5" Armature Stroke: ±22 mm Armature Diameter: 284 mm Thread: M10 Max. Acceleration: 130 g Acceleration at 60 kg payload: 30 g Frequency Range: 5 - 3000 Hz Weight Compensation: up to 500 kg Total Connected Power: approx. 35 kVA Required Cooling Water: optimally 15 °C - 20 °C Water Flow Rate: approx. 25 l/min Water Pressure: approx. 3 bar Compressed Air: 6 bar for weight compensation and center suspension Total Weight: approx. 3,500 kg Equipment Vibration Exciter SW 8100/1 Sliding Table Digital Amplifier Control Cabinet with Water Cooling Connection Box / Fuse Box Head Expander made of Magnesium Angle for Sample Mounting / Horizontal Shock Testing Water-Cooled System Head Expander / Test Table Head Expander Weight: approx. 50 kg Mounting Surface Head Expander: 800 x 700 mm Grid: 50 x 50 mm Thread: M8 Angle for Sample Mounting: approx. 25 kg Mounting Surface Angle: 230 x 230 mm Thread: M8 Suitable for use in high-performance horizontal shocks Modernization / Expansion 2021 The system was expanded in 2021 to achieve higher performance levels. The water cooling system was expanded with an additional plate heat exchanger for better heat dissipation to the cooling water. The main transformer for the digital amplifier was replaced. The power was increased from 15 kW to 24 kW. The voltage was increased from 92 V to 120 V. The capacitor bank was expanded to achieve better shock performance. The weight compensation was renewed. Scope of Delivery 1x Connection Box / Fuse Box 2x Control Cabinet, Water Cooling and Amplifier, approx. 250 kg each 1x Shaker / Vibration Exciter, approx. 2,200 kg 1x Sliding Table, approx. 450 kg 1x Head Expander, approx. 50 kg 1x Angle for Test Specimen Mounting / Horizontal Shocks, approx. 25 kg Condition Used Itsdpfxjzd T Rhs Ai Rjk Amplifier Serviced New Main Transformer New Capacitors Capacitor Bank Enlarged Water Cooling Optimized with Additional Plate Heat Exchanger Weight Compensation Renewed Optical Condition according to Pictures Sale from our location. Scope of delivery as shown in the pictures. Subject to changes and errors in the technical data as well as prior sale.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Max. machining diameter: 2,800 mm Min. machining diameter: 1,400 mm Itedozu Itrjpfx Ai Rjk Max. machining height: 600 mm Max. workpiece weight: 5,000 kg Rotational speed of the chuck: 21–68 /min.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 10,294 h, functionality: fully functional, machine/vehicle number: P087WH855, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, table load: 300 kg, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range X-axis: 700 mm Travel range Y-axis: 400 mm Travel range Z-axis: 330 mm Rapid traverse speed: 54 m/min Spindle speed: 100–10,000 rpm Distance spindle–baseplate: 250–580 mm Main spindle power: 5.5 kW Table area: 650 × 400 mm Table load: 300 kg Tool positions: 21 Ijdpfxozul Tce Ai Rjtk MACHINE DETAILS Dimensions & Weight Dimensions: 1,565 × 2,027 × 2,336 mm Machine weight: approx. 2,200 kg Operating hours: 10,294 h EQUIPMENT Central oil interval lubrication 100 mm column extension Interior lighting 16 additional I/O Rapid traverse with bell-shaped acceleration and deceleration Manual handwheel feed Directory display from memory card 1,000 storable programs Multilingual display Thermal compensation of the XYZ axes Parameter backup function Retraction cycle for tapping without a compensating chuck MANUAL GUIDE Background editing Extended part program editing Coordinate system selection G92 Workpiece coordinate system G52–G59 48 additional workpiece coordinate systems G54.1 Return to reference point G28 Quick Editor Setup file Production counter Tool correction memory C for D/H code and wear Threading without a compensating chuck M29 Subprogram call M98/M198/M99 Customer macro B G65, G66/G67 Drilling cycle G73, G74, G76, G81, G89/G80 Coordinate system rotation G68/G69 Circular interpolation with R programming AI Contour Control I G05.1 Helical interpolation Skip function G31 Multi-step skip G31 P1–P4 Verification of travel limit before movement Verification of stored travel limit 1 Verification of stored travel limit 2 G22/G23 Customer-specific PMC Real-time customer macro

Condition: good (used), Year of construction: 1982, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Itjdpezvb E Rjfx Ai Rek Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: used, machine/vehicle number: 008705, Overall length: 2099 mm Iodpfxszq Utds Ai Rjtk Overall width: 1138 mm No of Filter sleeves: 16

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 060308, functionality: fully functional, power: 6.9 kW (9.38 HP), input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 40 °C, number of chambers: 1, control type: PLC-controlled, Equipment: CE marking, documentation/manual, GIARDINA MOS® 3D Static Microwave Drying Chamber Professional static drying system designed for the drying of coated wooden components, particularly for water-based coatings. The GIARDINA MOS® 3D technology uses microwave energy for controlled and homogeneous three-dimensional drying. After removal of the water component from the coating, a low-temperature hot-air circulation phase completes the drying and curing process. Itsdjztvf Topfx Ai Rek The system is suitable for three-dimensional and assembled wooden components, including furniture, chairs, window and door components, profiles and turned parts. Technical data: Manufacturer: GIARDINA FINISHING S.r.l. Model: MOS® 3D Year of manufacture: 2006 Serial number: 060308 Electrical power: 6.9 kW Supply voltage: 400 V Frequency: 50 Hz Rated current: 19 A PLC controlled Air recirculation motor: 3 kW / 4 HP CE marked Original operating and maintenance documentation as well as electrical diagrams are available. The machine was recently taken out of production and is currently dismantled and stored in a dry warehouse. It was in regular operation prior to being taken out of service.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,000 kg, total length: 3,200 mm, total width: 600 mm, input voltage: 400 V, inner dimension width: 580 mm, Equipment: rotational speed infinitely variable, Brand RÖSLER Type R2000 1 BT Electrical connection Ijdpfszfwl Sex Ai Rstk 380V Dimension L (Length) 3200mm Dimension W (Width) 1400mm Dimension H (Height) 1850mm

Condition: used, Year of construction: 1988, functionality: fully functional, Shredder Manufacturer: Vecoplan Itjdpfx Aszvqv Eei Rjk Type: VAZ 145/135 Motor: 22 kW with sliding plate

Year of construction: 2007, condition: used, functionality: fully functional, The temperature control unit from Plasma/Single is for sale; there are 2 units available for sale, and the price is per unit! Itedpfxezul N Re Ai Rjk Medium: Oil Maximum operating temperature: 180°C Heating capacity: 6 kW Cooling capacity: 14 kW External cooling fan... PT 100 sensor Interface 0-20 mA

Condition: used, Year of construction: 2017, functionality: fully functional, GF+ FORM 300 – EDM machine with WorkPartner 1+ automation For sale is a high-quality GF+ FORM 300 EDM machine with automated workpiece/electrode handling system WorkPartner 1+ automation, manufactured in 2017. The machine is from GF Machining Solutions (Georg Fischer) and is particularly suitable for the precise machining of demanding workpieces in the tool and die making industry. Machine features: • Manufacturer: GF Machining Solutions / GF+ • Type: FORM 300 • Automation: WorkPartner 1+ • Process: Ram EDM • Robust and precise design for professional production use • Automated loading through WorkPartner 1+ • Integrated machine control • Suitable for tool and die making, as well as demanding precision machining The depicted system is located in an industrial production environment and is in used condition, as shown in the pictures. The combination of GF+ FORM 300 and WorkPartner 1+ enables an efficient, automated production process and reduces manual intervention. This is particularly interesting for companies that want to expand their EDM capacity or implement an automated ram EDM solution. Itedeztn Adepfx Ai Rjk The machine can be inspected at any time, but it has already been dismantled and is no longer connected to the power grid. Therefore, a functional demonstration is not possible. The pallets and electrode holders can be purchased separately. Important note: The operating hours will be provided later, but the machine has hardly been used. Price: on request Inspection: possible by appointment Sale is preferred to commercial enterprises. The machine is sold used. Sale excludes any warranty for defects. All information is provided to the best of our knowledge, but without guarantee. Errors, prior sales, and changes reserved.

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, power: 0.35 kW (0.48 HP), suction capacity: 400 m³/h, Capacity: 400 m³/h Negative pressure: 1250 Pa Motor: Type B5-71 with 2850 rpm Connection: 380 V Total power consumption: 0.37 kW Ijdpjzu Th Iefx Ai Retk Machine weight approx.: 35 / 28 kg Machine dimensions approx. L x W x H: Ø 0.5 x 1.3 m

Condition: used, functionality: fully functional, Slow-running plastic granulator – only 25 rpm, preventing thermal damage. Gear roller mill Goliath Plus 1 Milling chamber size (feed chute): 228 x 172 mm Power requirement only 1.5 kW Weight 230 kg (built like a tank) Dust-reduced, consistent granulate quality. Easy cleaning in 2–3 minutes! Very quiet operation. Low energy consumption. Itedey Azp Eopfx Ai Rjk Rotatable cutter elements for double the cutter unit service life Paddle level indicator in the discharge hopper: No "grinding in its own juice" possible, as the mill shuts down in advance.

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Ijdpfsy Hlvwsx Ai Rotk Condition – Fully operational.

Condition: new, Year of construction: 2023, functionality: fully functional, power: 1.45 kW (1.97 HP), input voltage: 230 V, cutting height (max.): 79 mm, saw blade diameter: 250 mm, rotational speed (max.): 3,800 rpm, total length: 14,050 mm, total width: 15,500 mm, total height: 7,900 mm, overall weight: 120 kg, cutting width at rip fence: 769 mm, extraction connection diameter: 100 mm, hole diameter of the disc: 30 mm, table length: 508 mm, table width: 792 mm, The Fusion 1 model is an excellent solution for anyone looking for a compact but very accurate and high-quality saw to start with - Polished cast iron table. - Robust cast iron motor suspension. - Can be used with DADO circular saw blade set. - Two T-slot rails on both sides of the circular saw blade. - Quick and easy control and tilting of the cutting height. - Lever for quick exchange of circular blade. - Positionable main switch. - Quick attachment of the riving knife. - Additional rear table included in the price. - Sufficient power for longitudinal and cross cuts up to 79 mm in height. - Storage space for tools and rulers that are always to hand. Itsdpfxetuurto Ai Rok - Type: Fusion 1 - Recommended area of application: Craftsman - Power (230 V): 1450 W - Recommended fuse switch: 13 A - Disc x clamping: 250 × 30 mm - Rotations: 3800 rotations/min. - Tilting of the disk: 0-45° - Max. Max. cutting height at 45°: 50 mm - Max. Cutting height at 90°: 79 mm - Max. Cutting width: 769 mm - Extraction: 100 mm - Cast iron table size: 508 mm × 792 mm - Overall table size: 1118 mm × 792 mm - T-slot rail dimensions: W × H 24.3 mm (19 mm), × 4.2 (10.7) - Dimensions: 1550 mm × 1405 mm × 1100 mm - Weight: 110 kg - Packaging size: - Cardboard box on its own pallet 1330 mm × 700 mm × 790 mm - Weight incl. packaging: 120 kg Scope of delivery - elongated ruler - Angled ruler - Gripper for small parts - Upper suction hood - Rear table extension - Carbide circular saw blade for universal use (diameter 250/30 mm, Z40 - Hose for suction The machine is delivered partially disassembled in a transport box. The set-up time is estimated at approx. 1 hour.

Condition: good (used), Year of construction: 1986, Grinding depth: 500 mm Internal diameter: 20...400 mm Workpiece spindle speed: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Total power consumption: 17 kW Machine weight approx.: 6.5 t Additional information: Grindable diameter with workpiece protection: internal / internal 20..400 mm; external 500 mm Max. workpiece diameter with workpiece protection: 500 mm Max. grinding depth: 315 mm Grindable taper angle: 60° Internal grinding spindle speeds: 2640...16500 rpm Drive power for surface grinding attachment: 4 kW Drive power for workpiece motor: 1.5 kW Workpiece spindle speeds: 40...400 rpm Table speed: 0.1...8 m/min Ijdpfszvaxiox Ai Rotk Rapid traverse: 10 m/min Table travel: 630 mm Max. distance from the workpiece spindle flange to the grinding spindle support: 1250 mm