Used Gannomat Mod 260 for sale (4,509)

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm Iijdpfxjw Sgnks Ab Nob - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter Ijdpfjxdttijx Ab Nsib - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: new, Year of construction: 2025, CNC-controlled drilling, gluing, and dowel insertion machine Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-out, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 700 mm, max. traversing speed 95 m/min - Z-axis manually adjustable via mechanical digital counter, position on support table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth 0–35 mm (with drill length TL 70 mm), automatically set with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas Iijdpfxsw Sgm He Ab Njb - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER to flush glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Indicator lamp for residual glue level in glue container - 1 pc. left side stop, 1 pc. right side stop (all removable) - 2 pcs. start buttons for individual operation with 1–2 workpieces - 2 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT controller with: Integrated industrial PC, incl. Beckhoff TwinCAT soft PLC, operating temperature range 0–50°C, 15" capacitive touchscreen TFT industrial display, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 2 working fields assignable with different programs, graphical workpiece display, parametric programming, zero-point shift, programmable work lists, plain text error diagnosis - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, art. no. 0470-0810 - 1 EASY CLEAN system, for automatic test glue shots before starting the drilling/gluing/dowel insertion program. E.C.S. for 1 pc. glue nozzle, art. no. 0471-Z010 - 1 single-spindle vertical drilling unit from ABOVE, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjusted via mechanical digital counter Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill length TL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) Art. No. 0471-0830 - 4 vertical angled clamping cylinders 10° with mount, additional, Art. no. 0470-0850 Available: short notice

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Lamella - carcass press with rapid traverse Iiedpfx Aboiidm Ne Njb Technical data: Lamella carcass press from our showroom; Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm; - lamella press beam top with 6 elements, lamella press beam side with 5 elements - lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free. - Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees. Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, FOR SALE AN NICE TRUMATIC 260 WITH COMPLETE TOOLINGS Iedpfevkda Djx Ab Noib

Condition: ready for operation (used), Siemens 6SL3210-1NE26-0UL0 SINAMICS Power Module 230 Version: B SN:T-F31912000116, used, normal signs of use, 100% functional, scope of delivery as per photos Ijdpoxahbgsfx Ab Noib

Condition: ready for operation (used), Siemens 6SL3120-1TE26-0AA1 SN:T-V72031392 Single Motor Module, serial number as per photo, used, heavy signs of wear, 100% functional Isdpfexag U Ejx Ab Nsib

Condition: used, Year of construction: 2017, Number of drilling spindles: 21 pcsPitch: 32 mmDrill chuck: Clamping surface of drill shank: 10 mmOperation: foot pedalTools included: yesDrilling direction: from below & end faceTilting: manualTilting angle: only 0° or 90°Max. pass-through height: 80 mmMax. pass-through width: 750 mmNumber of material clamps: 3 pcsType of material clamping: pneumaticDesign: stationaryStop system: only for structural seriesWeight approx.: 400 kgMotor power: 1.5 kWDust extraction diameter: 120 mmStorage location: with customer Iiodpfx Ajihghrsb Nsb

Condition: used, Year of construction: 2024, New display machine! List price: €32,665,- complete in standard configuration with: Sturdy, torsion-resistant steel frame constructed with welded and bolted assemblies. Louvered top press beam with 6 elements; louvered side press beam with 5 elements. Louvered press beams feature the proven Ganner system tolerance compensation for tightly pressed carcass joints. Counterpressure surfaces (side pressure wall and bottom) are 38 mm thick, coated, continuous support plates. Continuous pressing surface with a height of 95 mm at the lower vertical press beam. Electromotive adjustment of both press beams via precision trapezoidal threaded spindles (with increased pitch and running accuracy) and high-performance running nuts with grease reservoir. Pressing is performed electromechanically via two separate worm gear motors (2 x 0.75 kW). The pressing force of the press beams is continuously adjustable via 2 potentiometers and controlled electronically by frequency converters, ensuring absolutely wear-free force control. Pressing force for the horizontal press beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg). Pressing force for the vertical press beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg). Pressing and adjustment speed of the press beams with fine positioning, selectable via three-position rotary switch: 5 / 10 / 25 mm/second. Very simple operation using 6 separate push buttons; 8 movement sequences selectable via control system. Freely adjustable pressing time preselection with automatic opening from 0–30 min (switchable to seconds or hours). Working height/feed height: 300 mm. Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm. Weight: approx. 1800 kg net. Dimensions (Length x Width x Height): 3.45 m x 0.95 m x 2.30 m. Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A). Additional equipment: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams. Pressing speeds of 5 / 10 / 25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for pressing special components. 1 set of machine feet (working height 500 mm). Iijdjuf Hx Hjpfx Ab Neb Storage location:

Condition: reconditioned (used), Year of construction: 1990, Motors 2x1.85A 50Hz 380V 2800 rpm Iisdov Nptmjpfx Ab Neb Air operating pressure 6 bar 30 spindles D=10 mm mount Combination foot switch Emergency stop switch Main switch Manual height adjustment Manual side adjustment

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, Two speeds: 1400 rpm at 1.1 kW, 2800 rpm at 1.5 kW Compressed air connection 6 bar Fully automatic pneumatic control with foot valve Additional switch for "chip removal" program T-shaped drill head with 7+2 drill spindles, 32 mm pitch Drill shank diameter 10 mm Iiodpfxov Npw Ej Ab Nsb 90° pivoting with locking mechanism Chassis

Condition: good (used), Year of construction: 1982, functionality: fully functional, Power 380V 3.3A Motor power 1.1kW 2800 rpm Automatic pneumatic control with control panel Drill head with 23 spindles, pitch 32 mm Drill hole depth adjustable drill shaft 10 mm position adjustment 5-60 mm Clamping height 80 mm Passage width 800 mm Dimensions: 1200 x 900 mm Weight approx. 400 kg Iedpfx Ajq Auwtob Noib 1x setting gauge row bore 1x setting gauge side stop 1x stop ruler 1500 mm 1x fence 2000 mm

Condition: reconditioned (used), functionality: fully functional, Drilling and pressing machine for all types of furniture fittings, rows of holes and hole group drilling machine in system 32 Power connection 400V 0.75kW Spindle speed 2800 rpm Stop ruler 960 mm 2x swivel stop for drills with shaft diameter 10 mm Workpiece thickness max. 40 mm 1x 7-spindle drilling head for row of holes, pitch 32 mm with integrated pins Iisdsumw Sbepfx Ab Nob Manual feed Base at an additional cost Olive drilling head €450.00 Mepla drilling head with pressing die €550.00 Hettich drilling head with pressing die €550.00

Condition: new, Year of construction: 2026, Drilling machines for bottom hinges and window handles for precise and efficient drilling of windows. Short introduction: • Accessory kit for bottom hinges • Drilling pattern according manufacturer (e.g. G-U, Roto , Maco, Siegenia Aubi, Winkhaus ... and other manufacturers) Ijdpfxsdx R Hcj Ab Nsib • Accessory kit for window handles • Massive precision drilling unit from GANNOMAT

Condition: new, Year of construction: 2026, Efficient gluing in cabinetry in dowel holes and back side grooves as well as gluing at frame-, window- and door-constructions of dowel holes and mortise and tenon joints. Iiedohnddzspfx Ab Nsb Short introduction: • Universal glue applicator • Timesaving - Easy - Clean • Different nozzles and attachments available • Moveable Universal application: • Gluing of dowel holes • Gluing of back side grooves • Gluing of edge surfaces • Gluing of surfaces in gerneral • Gluing of mortise and tenon • Gluing of parts at cabinets, case goos, drawers • Gluing of parts at frames • Gluing of parts at windows and doors • Processing of panel and solid wood componets

Condition: new, Year of construction: 2026, Drilling machines for bottom hinges and window handles for precise and efficient drilling of windows. Short introduction: • No setup times between drilling of bottom hinges and window handles • The advantages of drilling from underneath • Accessory kit for bottom hinges • Drilling pattern according manufacturer (e.g. G-U, Roto , Maco, Siegenia Aubi, Winkhaus ... and other manufacturers) • Accessory kit for window handles Ijdpfodx R Hzjx Ab Neib • Massive precision drilling unit from GANNOMAT

Condition: new, Year of construction: 2026, The Concept Eco and Concept Primus are the ideal assembly support for dowel construction at the case goods as well as drawer production. Short introduction: • With workpiece tolerance compensation (System GANNOMAT) • 2 Potentiometer for stepless adjustable pressing force • Pressing force min. 300/500 daN (kg) at Concept Eco resp. Iisdpfx Abodx R Dmj Neb Pressing force min. 600/800 daN (kg) at Concept Primus • Pressing force max. 2200 daN (kg) at Concept Eco resp. Pressing force max. 3500 daN (kg) at Concept Primus • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening • Simple operation by 6 individual push buttons for 8 motion sequences

Condition: new, Year of construction: 2026, The composition of the cabinet handling systems to create a manual, semi- or fully-automatic cabinet assembly line is depending on individual production requirements. Cabinet assembly lines that will make work easier, reduce set-up time and increase precision, we will explain to you in a personal conversation. Iijdpsdx R D Dsfx Ab Nsb

Condition: new, Year of construction: 2026, Universal solid wood boring machine for frames and horizontal mortiser. Short introduction: • Universal application: frames, entry doors, windows, as well as useable as horizontal mortiser, ... • Drilling depth up to 150 mm (larger drilling depths optional) • Pneumatical position height adjustment for 2 levels 0 - 100 mm, adjustable through mechanical digital counters Isdpfedx R D Ssx Ab Njib • Drilling in two height positions at a single workpiece clamping position • Pneumatic clamping cylinders • Multi spindle drillheads (option) • Pneumatic feed (option) • Mobil through castors (option) or with pallet trucks

Condition: new, Year of construction: 2026, CNC drill and dowel inserting machine for fully automatic bore, glue and dowel driving. The drill glue and dowel machining center with compactness, efficiency, quality and flexibility. Short introduction: • Universal CNC controlled drilling and dowel inserting machine • Glue shot monitoring via GIC Iisdpodx R Dfofx Ab Nob • Closed gluing system • Suitable for panel and solid wood processing • Optional additional horizontal and vertical drilling spindles • Relieves CNC machining centers • Optimal complement to nesting machines

Condition: new, Year of construction: 2026, Universal solid wood boring machine with stepless turnable drilling unit for universal applications like e.g. staircases, entry doors, windows, winter gardens as well as useable as horizontal mortiser. Short introduction: • Universal application: staircases, frames, entry doors, windows, winter gardens as well as useable as horizontal mortiser, ... Iedpfxjdx R E Ts Ab Neib • Steppless turnable drilling unit: 65° - 0 - 65° • Drilling depth up to 200 mm (larger drilling depths optional) • Position height adjustment for 2 levels, pneumatically, 0 - 100 mm • Drilling in two levels through pneumatic raising and lowering of the drilling motor at a single workpiece clamping position • Pneumatic clamping cylinders • Multi spindle drillheads (option) • Pneumatic feed (option) • Mobil through castors (option) or with pallet trucks

Condition: new, Year of construction: 2026, CNC drilling and dowel insertion center for doors (rails and stiles) and window components for a rational and professional production of doweled frames. Short introduction: Iiedpjdx R A Ujfx Ab Nob • Universal CNC controlled drilling and dowel inserting machine for door stiles and rails as well as for window profile processing • Glue shot monitoring via GIC • Closed gluing system • Optional, additional horizontal drilling spindles • Relieves CNC machining centers

Condition: new, Year of construction: 2026, The Concept Eco and Concept Primus are the ideal assembly support for dowel construction at the case goods as well as drawer production. Short introduction: • With workpiece tolerance compensation (System GANNOMAT) • 2 Potentiometer for stepless adjustable pressing force • Pressing force min. 300/500 daN (kg) at Concept Eco resp. Pressing force min. 600/800 daN (kg) at Concept Primus • Pressing force max. 2200 daN (kg) at Concept Eco resp. Pressing force max. 3500 daN (kg) at Concept Primus Isdpedx R Dtofx Ab Noib • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening • Simple operation by 6 individual push buttons for 8 motion sequences

Condition: new, Year of construction: 2026, CNC bore and hinge insertion machine with magazine feeding for the automatic processing of hinges and hinge mounting plates. Robustness, durability and ease of use distinguish our automatic CNC controlled drilling and insertion machines. Short introduction: • CNC controlled hinge boring and inserter for high capacity • Flexibility through the CNC control • Massive and robust drilling units • Inserting die made of steel for a long life time use Iisdjdx A U Hspfx Ab Nsb • Solid wood drilling with standard 1,5 kW motor • Safety-control with metal-detector (option)

Condition: new, Year of construction: 2026, Furniture doors and drawer fronts CNC machining center. Iodpfx Absdx A U Io Nsib Throughfeed machine for drilling, drilling & insertion of hardware, grooving and routing. Short introduction: • CNC controlled front processing center • Complete processing of furniture doors and drawer fronts • Workpiece length and width control system