Used Goss M800 for sale (87)

Condition: used, Year of construction: 2010, x-travel 800 mm Gujdpfx Aley Ay Itoxjb y-travel 600 mm z-travel 500 mm control Heidenhain iTNC 530 weight of the machine ca. 8300 kg

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and inspected Rated voltage: 400V Rated power: 60kVA at 50% duty cycle Short-circuit current: 22kA Welding current: 17.6kA Gsdpfx Alsh N Sd Usxeub Fuse protection: 125A Throat depth: 420mm Electrode force: 470daN Cylinder with pre-stroke Total stroke: 80mm Double stroke: 60mm Electrode taper MK2 – new electrode holder New 2-stage foot switch according to UVV All pneumatic and water hoses renewed Weight approx. 330kg - TE 180 with digital display of welding current, current rise, etc. - Main switch at control cabinet - Original documentation / operating manual available - Machine inspection with confirmation 02/2026 Demonstration and inspection by appointment, Commissioning and training at customer’s site available for an additional charge The unit is located in Dresden, near A17 A suitable cooling unit is always in stock – available at an additional cost ;-)

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Equipment: documentation/manual, For sale: as-new PEMTec PEM800 Year: 2019. The machine can be inspected and tested under power. HOW THE PROCESS WORKS With this process, metal parts are machined contact-free and with high precision. An electrically conductive electrolyte—saltwater—is introduced between a negatively charged tool electrode (cathode) and a positively charged workpiece (anode). This electrolyte removes the ionized material from the machining gap between the electrode and the workpiece via anodic dissolution. The electrode is mapped inversely onto the metal surface. The targeted current pulses, oscillating tool electrode, and the extremely small working gap form the basis for the precision of this technology. The PECM process is an advancement of conventional electrochemical machining. By using synchronized current pulses and an oscillating tool electrode, PEMTec enables a very small machining gap. This allows highly precise and economical manufacturing without any process-related tool wear. Absolutely contactless, and free from thermal or mechanical impact, workpieces are produced with profile accuracy and repeatability down to the low micrometer range, and a surface finish of up to 0.03 µm. TECHNICAL DATA › Machine frame made of natural granite › Usable machining area: 375 – 545 mm (min./max.) › Machine table: 660 × 540 mm (W×D) Gujdpfx Asy Etcvjlxob › Installation space: 2,200 × 2,560 × 2,870 mm (W × D × H), without electrolyte treatment system › Maintenance-free precision working axis with direct drive › Fixture mounting via 6 T-slot rails (M10) in the machine table › Real-time process control system with short-circuit detection › HMI via 21.5-inch touchscreen › Water-cooled, modular generator from 1,200 A to 12,000 A › Automatic electrolyte treatment system › Optional XY adjustment aid and C-axis › The power of the electrolyte unit is optimally matched to the respective application. Standard systems are available with capacity from 1,000 or 2,000 liters.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 800 mm, total width: 4,300 mm, spindle speed (max.): 24,000 rpm, total height: 4,789 mm, table load: 10,000 kg, overall weight: 30,000 kg, spindle motor power: 45,000 W, controller manufacturer: HEIDENHAIN, controller model: k25, product length (max.): 4,280 mm, number of axes: 3, This 5-axis Breton Matrix WM 800 K25 was manufactured in 2003. It features a substantial table dimension of 2000 x 3000 mm and impressive axes strokes of 2000 mm in X, 2500 mm in Y, and 800 mm in Z. The machine has a maximum rotation speed of 24000 rpm and a rapid forward speed of 40 m/min. If you are looking to get high-quality milling capabilities, consider the Breton Matrix WM 800 K25 gantry milling machine we have for sale. Contact us for further details. Gusdpfsy Amd Isx Alxeb • Table dimensions (X/Y): 2000 x 3000 mm • Rapid traverse (X/Y/Z): 40 / 40 / 20 m/min • Power: 45 / 20 kW

Condition: good (used), Year of construction: 2010, (ex Formula 1 ) Traverses XYZ: 800 x 800 x 550mm, 500 x 500mm table, A axis -91 / + 121 degrees, C axis, 360 degrees, Heidenhain TNC530, Godpfeywv N Aex Alxeub Spindle Speed 20000rpm, 36kW Spindle Motor, HSK A63 Spindle Taper, 30 tools, swarf conveyor, through spindle coolant,

Condition: ready for operation (used), Year of construction: 2007, clamping force: 8,000 kN, screw diameter: 85 mm, injection weight: 2,452 g, This Krauss Maffei KM 800-6100MX was manufactured in 2007. It features a clamping force of 8000 kN and an injection volume of 2695 cm³, making it suitable for various materials such as PA, PP, PE, and ABS. The machine is equipped with a Wittmann Robot System for enhanced handling capabilities. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 800-6100MX hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection unit: 6100 • Injection volume: 2695 cm³ • Injection pressure: 2242 bar • Materials processed: PA, PP, PE, ABS, etc. • Cylinder temperature: up to 450°C • Availability: Early 2027 Additional equipment Guedpfx Aljyyxc Dexjb • Handling: Wittmann robot system • Model: W743 • Power: 400 V, 18 A / 12.5 kVA • Axes travel: X 1200 mm, Y 2000 mm, Z 4000 mm

Condition: ready for operation (used), Year of construction: 2006, operating hours: 30,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Gusdpfx Aeymn Rvjlxjb Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 44500 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - tiebar pull system - 3 x core pulls on movable plate - 2 x core pulls on fix plate - 20 x hot runner controller - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2006, operating hours: 50,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Gedpfx Ajymn Nfslxsub Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 44500 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - tiebar pull system - 3 x core pulls on movable plate - 2 x core pulls on fix plate - 20 x hot runner controller - Robot interface according to Euromap 67

Condition: used, MIKRON HSM 800 ProdMod is a Vertical machining center engineered for precision, high accuracy and reliability. Working capacities: table 900×600 mm, max table load 800 kg; travels X800 × Y600 × Z500 mm. Main specs: spindle motor 12.5/22 kW, total power 26 kW, 3x 400 V 50 Hz, noise 75 dB(A), machine weight ≈8300 kg, dimensions L4000×W3700×H2500 mm. Equipment: 50‑position tool magazine (tool Ø max 75 mm, length 210 mm, max tool weight 2.5 kg). Delivers tight tolerances; typical applications: automotive, aerospace, medical, machine tools and watchmaking. Gsdpfxjyxn Rhs Alxjub

Condition: excellent (used), MIKRON HPM 800 U is a 5‑axis machining center for precision, high accuracy and reliability. Table 630×440 mm, 5 T‑slots, table load 800 kg; travels X800 Y800 Z550 mm; A +91/‑121°, C 360°. HSK‑A63, spindle‑nose to table 600 mm; 115 tools, Ø max 80 mm (160 free), tool length 350 mm. Spindle 0–20000 t/min; feed 0–20000 mm/min; rapid 45 m/min; accel. 6 m/s; max feed force 6000 N; 3×400V 50Hz; 55 kW; weight ~15000 kg; size 3505×3100×2980 mm. Accessories: high‑pressure coolant, paper filtration, 2 pallets, touch probe, laser tool preset, chip conveyor. Suited to tight tolerances in automotive, aerospace, medical, watchmaking. Godpfxjyxn E So Alxjub

Condition: ready for operation (used), Year of construction: 2006, operating hours: 50,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, injection pressure: 1,795 bar, opening stroke: 2,100 mm, No reserve price – guaranteed sale to the highest bidder! Gedpfx Aoyv Acmelxoub TECHNICAL DETAILS Clamping force: 8,000 kN Max. mold opening force: 560 kN Moving platen opening force: 89 kN Moving platen closing force: 92 kN Mounting platen (h x v): 1,600 x 1,550 mm Clear daylight (h x v): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Min./max. mold installation height: 500 / 1,100 mm Max. mold weight: 12,200 kg Max. opening width: 2,100 mm Ejector stroke: 300 mm Ejector force forward/back: 200/100 kN Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Shot volume: 3,367 cm³ Shot weight (PS): 3,064 g Injection flow rate: 690 cm³/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN MACHINE DETAILS Dimensions & Weight Space requirements (approx.): 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Pump motor rated power: 90 kW Installed heating power: 53 kW Barrel heating control zones: 7 Oil fill volume: 1,500 l Operating hours: 50,000 h EQUIPMENT Oscillating elements 1 x air valve Tie-bar pulling device 3 x hydraulic core pulls on moving side 2 x hydraulic core pulls on fixed side 20 x hot runner controllers Robot interface as per Euromap 67

Condition: reconditioned (used), functionality: fully functional, operating pressure: 170 bar, empty load weight: 155 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 8/17-4M HOT WATER WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 170 bar and 800 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 8/17-4M Power supply voltage 400V ~ 3 phase Discharge capacity (l/h): 400 - 800 Working pressure (bar) 30 - 170 Max. Water heating temperature (°C) 80-155 Connection power (kW) 5.5 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 155 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limit Two built-in chemical tanks allow for the dispensing of cleaning fluid directly through the The machine is easy to use and has a clear and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. The exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats the water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%. Godpfx Aleyyxxlsxeub

Year of construction: 2021, condition: as good as new (ex-display), Drive: electric 24V Operating hours: 30 Pneumatic tyres on rear axle: yes Side brushes: Yes / 2x Cleaning area: 6000 - 16000 m² Max area performance: 6700 m²/h Working width without side brushes: 800 mm Godpfx Alexzfwnexoub Length: 1600 mm Width: 1080 mm Maximum incline: 10% Operating hours: 30 Charger: included

Condition: used, Year of construction: 1999, operating hours: 82,540 h, Injection Molding Machine Krauss Maffei Model: KM 800-5700 MC Year: 1999 Screw diameter: 105 mm 4 core pullers 1 air valve AS Approx. 82,540 operating hours Mold installation height: min. 600 mm, max. 1,100 mm Clamping stroke: 1,400 mm Platen dimensions: 1,300 mm x 1,300 mm Tie bar distance (horizontal): 1,120 mm, (vertical): 1,000 mm Centering ring: 250 mm 8 water circuits each Conveyor belt Enclosure Handling system Tested and pump connections sealed by KM in 2025 Gedpfxoyup D He Alxsub The machine is operational and still in production Location: Thuringia _____ Our general terms and conditions apply; the seller assumes no liability for typing or data transmission errors. The specifications and images were provided to us by the owner and released for publication. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are age-appropriate. Used machines are sold exclusively to commercial customers and without warranty.

Condition: excellent (used), Year of construction: 2001, Injection moulding machine: Krauss Maffei KM 800-5000 MC Year of manufacture: 2001 Operating hours: 70,000 h Configuration: Machine with robot, safety cage and conveyor belt Availability: Two identical machines available Clamping unit: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen opening force: 98 kN Moving platen closing force: 92 kN Mould platen dimensions (H x W): 1,610 mm x 1,530 mm Gsdpexqh I Iofx Alxoub Distance between tie bars (H x W): 1,120 mm x 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum mould opening: 2,000 mm Hydraulic ejector stroke: 250 mm Injection unit: Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g Dimensions and weight: Machine dimensions (LxWxH): 10.5 x 2.86 x 2.89 m Weight: 43 tonnes

Condition: new, Year of construction: 2025, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, nominal power (apparent): 25 kVA, torque: 135 Nm, controller manufacturer: Siemens, controller model: 828D, workpiece weight (max.): 600 kg, total height: 3,000 mm, total length: 2,600 mm, total width: 2,310 mm, table width: 1,000 mm, table length: 550 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 10 h, coolant supply: 30 bar, spindle motor power: 19,000 W, spindle nose: HSK63A, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical Machining Center VM800 - Demonstration Machine - Technical specifications: Control unit: Siemens 828D Milling spindle 12,000 rpm, HSK63 Internal coolant supply (IKZ) 30 bar Bed flushing Renishaw OMP60 touch probe (Heidenhain available on request) Renishaw TS27R tool measurement (Heidenhain or BLUM available on request) Direct measuring systems in X, Y, Z axes by Heidenhain Rotating inspection window SPINVISTA (Black Edition) Automatic door Robot interface Automatic power-off function Automatic tool changer (30 positions, HSK63) Centralized automatic lubrication system Telescopic way covers Gsdpfx Asyr A T Aslxjub Electronic handwheel for manual operation Signal lamp Machine operating manual Pneumatic air gun Water gun Air blow gun Chip conveyor Coolant tank 286L This and other machines from GEWA Werkzeugmaschinen GmbH are available for viewing at our facility in the Eifel region.

Condition: used, Comprehensively tested and refurbished used Morton-Lödige model FKM800 304 stainless steel ploughshare mixer. Manufacturer: Morton Material: Stainless steel (304) Capacity: 240-560 litre working capacity. 800 litre total capacity (product dependent) Mixing Chamber: 1,800mm straight side x 760mm diameter Discharge Type: Pneumatically Operated Bomb Door Style Discharge Valve Guodpfx Aleykn Suoxjb Type Of Blades: Stainless Steel Shaft with Ploughshare Blades Motor: 15kW Motor with Gearbox Also Includes: 2 Stainless Steel Side Entry Choppers Direct Driven by 4kW Motors. Click on the link below to see a video of the machine running. Dimensions: 1,800mm straight side x 760mm diameter

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: FANUC, controller model: 31i CNC, total height: 3,760 mm, overall weight: 26,000 kg, spindle speed (max.): 6,000 rpm, tool weight: 30,000 g, number of axes: 4, This 4-axis DOOSAN HM 8000 horizontal machining center was manufactured in 2014. Equipped with Fanuc 31i CNC control, it features a maximum workpiece diameter of 1450 mm and weight capacity of 2000 Kg. It includes a high-pressure through-spindle coolant system, chip conveyor, and both workpiece and tool probes. If you are looking to get high-quality milling capabilities consider the DOOSAN HM 8000 machine we have for sale. Contact us for more information about this machine. Additional equipment • Belt-type oil skimmer • Triple light tower • Shower coolant • Through-spindle coolant 70 bar – 75 kW with cyclone filtration • Automatic shutdown • Tool load monitoring • Chip conveyor • Workpiece probe OMP60 • Tool probe TS27R Machine Benefits Technical Machine Benefits • Equipped with fanuc 31i cnc control • B-axis: indexable by degree • Pallet size: 800 x 800 mm Guedpfx Aloyair Uoxjb • Pallet centering device • Tool magazine: 60 tools type bt 50 • Max. Torque: 1732 n·m Extra Information Machine still under power Dimensions Machine Depth 8150 mm

Condition: excellent (used), Year of construction: 2008, Injection Moulding Machine DEMAG System 800/1120-9500 Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of manufacture: 2008 Clamping Unit Clamping force: 8,000 kN Platen dimensions (horizontal × vertical): 1620 × 1500 mm Tie bar spacing (horizontal × vertical): 1120 × 1000 mm Minimum mould height: 500 mm Maximum mould height: 1050 mm Maximum distance between platens: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mould weight: 7,200 kg Injection Unit Screw diameter: 130 mm Injection volume: 7,300 cm³ Shot weight (PS): 6,640 g Maximum injection pressure: 1,300 bar Screw length: 20 L/D Electrical & Hydraulic Equipment Rated pump motor power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1,300 l Machine Dimensions and Weight Machine dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Gsdpfx Alsyugctoxeub Machine weight: 33,500 kg Control cabinet weight: 9,700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with the modern ESS servo drive system, which increases the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor’s rotational speed to the current demand during the production cycle. As a result, electrical energy is consumed only during the actual machine demand. Key Advantages - Up to 30% reduction in electricity consumption - Servo drive technology for the hydraulic pump - World-class and proven technology used in the plastics processing industry - Reduction of energy losses during idle operation - Lower heating of the hydraulic system - Longer service life of hydraulic components - Possibility of installation on existing hydraulic injection moulding machines The ESS system enables a significant reduction in machine operating costs while maintaining full production parameters.

Condition: used, Wall-mounted slewing jib crane with hoist, slewing drive, and trolley ABUS Wall-mounted Slewing Jib Crane Type VW (3200kg x 6250mm) Serial No. 152 B8-16589596-0010 Year of manufacture: 2014 Load capacity: 3200 kg Slewing range: 180° Outreach, jib tip to wall: approx. 6640 mm Minimum outreach (crane hook to wall): approx. 1450 mm Maximum outreach (crane hook to wall): approx. 6250 mm Trolley travel distance: approx. 4800 mm Hook distance from jib tip: approx. 400 mm Distance from top edge of slewing motor to crane hook: approx. 1500 mm Jib length without wall bracket (slewing bearing): 6530 mm Total height with wall bracket (slewing bearing) and mounted components: 2590 mm (overall height) - Jib profile: double-T steel beam (height 600 x width 220 mm) - Jib electrically slewing via geared motor (2 speeds) - Electric slewing drive with limit and preliminary limit switches - Slewing angle end positions with electric end and preliminary limit switches - Painted in ABUS Yellow (original paint) - 2 wall flanges 340 x 280 mm, each with 6 Ø 27 mm holes - Mounting surface for wall flanges (W x H): 340 x 2500 mm Very good condition Hoist, Electric Wire Rope Hoist Trolley ABUS Type GM 800.3200H-202.41 6000.4.E100.20 Serial No. 250 B8-16589596-0010 Year of manufacture: 2014 Rated load: 3200 kg Reeving: 4/1 Lifting height: max. 6 meters Lifting speed: 5 meters/min. Creeping (fine) lifting speed: 0.8 meters/min. Trolley travel speed: approx. 4.5 and 19 m/min. - Control via radio remote and emergency control via pendant on cable - Trolley travel with electric drive, with limit and preliminary limit switches - Approx. 20 operating hours - Last inspection: April 2024 at 19 operating hours Wire rope hoist weight: 250 kg Guedpfx Aswzmi Islxob Space required for transport (L x W x H): 6640 x 1400 x 2470 mm Total weight jib with wire rope hoist: 1500 kg Very good condition

Condition: ready for operation (used), A screen printing system including a feed table with XY adjustment is available. Printing area: 800mm/500mm, max. print object height: 160mm, max. frame dimensions X/Y/Z: 1290mm/760mm/40mm, max. printing speed: 500 prints/h, machine dimensions X/Y/Z: approx. 1700mm/1100mm/2000mm, weight: approx. 450kg. Documentation available. An on-site inspection is possible. Gujdpjwut Hajfx Alxjb

Condition: ready for operation (used), An Eickmeyer flat printing machine with parallel lifting upper frame is available. Printing format X/Y: 500mm/800mm, max. screen frame dimensions X/Y/Z: 1050mm/520mm/30mm, max. workpiece height: approx. 140mm, operating hours: approx. 50h. Documentation available. On-site inspection is possible. Guodpfxevuadts Alxsb

Condition: used, Year of construction: 2006, Injection moulding machine Krauss Maffei KM 800-4300 MX, year 2006 The machine is equipped as follows: Gedpfxow Hwr Dj Alxoub - 5 hydraulic cascade controls - Injection unit with a 90 - MT5 control system - Krauss Maffei handling system - 2 conveyor belts

Condition: used, Year of construction: 1999, Injection moulding machine Krauss-Maffei 800 /5700MC, year 1999, for sale. Technical specifications available on request. Gsdpfx Aleyg Hbgjxeub

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM800.3200 H-202.41.6000.4E 100.20, Load capacity 3.2t Reeving 4/1 Lifting height 6m Lifting speeds 5/0.8m/min Cab travel speeds 20/5m/min FEM group 2M Operating voltage 400V Control voltage 230V Flange width 300mm Available immediately in stock Gsdpfxsvx E Ilj Alxoub