Used Hanomag Roots Compressor, Year Of Manufacture 1956 for sale (54,433)

Condition: like new (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: 152-026710, overall weight: 3,000 kg, total height: 5,593 mm, total width: 1,340 mm, load capacity: 5,000 kg, power: 4.63 kW (6.30 HP), main lifting speed: 4,000 mm/min, fine lifting speed: 12 mm/s, throat depth: 4,000 mm, working height: 4,500 mm, operating hours: 20 h, Equipment: documentation/manual, 5 t pillar-mounted slewing crane with electric hoist and electric slewing drive Manufacturer: ABUS Kransysteme GmbH Type: VS 660 pillar-mounted slewing crane with electric chain hoist / wire rope hoist GM 1000.5000 H-162.41.6000.6.E130.20 Year of manufacture: 2023 Serial No.: Crane: 152-026710 Trolley: 250-123870 For sale is a like-new pillar-mounted slewing crane with a lifting capacity of 5,000 kg and a reach of 4,000 mm. The system was put into operation at the end of 2023 and has only been used very little. According to the available remaining useful life calculation, only 20 operating hours have been recorded up to April 2025, resulting in a remaining reserve of approximately 1,598 hours or a projected remaining useful life of over 30 years. The crane features an electric slewing drive, an electric trolley, and a two-stage hoist. Operation is conveniently performed via a pendant control. The system is equipped with a load indicator system (LIS-SV), upper and lower hoist limit switches, and the associated inspection and conformity documents. Scope of supply: * Complete pillar-mounted slewing crane * Electric slewing drive * ABUS trolley * ABUS wire rope hoist * Load hook 5 t * Crane inspection book Gedpfxjzd Sqae Afuobu * Declaration of Conformity * Remaining useful life calculation * Existing technical documentation Condition: Used, very good condition, low operating hours, regular inspection records available. System is visually and technically well-maintained. Photo of the assembled system is available. Location: Dresden Loading: Loading onto a suitable transport vehicle is included in the purchase price. Inspection: An inspection of the system is expressly desired and possible by appointment. Technical documents and further images can be provided upon request. Subject to prior sale and errors. * Lifting capacity: 5,000 kg * Reach: 4,000 mm * Crane type: VS 660 * Pillar diameter: 660 mm * Underside of boom: 4,983 mm * Hook travel: 6,000 mm * Crane classification: H2 / B3 * Hoist motor group: 2m / M5 * Operating mode: Indoor operation * Slewing drive: electric, two-stage * Slewing speed: 0.15 / 0.60 rpm * Hoisting speed: 0.7 / 4 m/min * Trolley travel speed: 5 / 20 m/min * Operating voltage: 400 V / 230 V, 50 Hz * Total connected load: 4.63 kW * Total current consumption: 12.07 A * Load indicator system: LIS-SV * Hook: Single hook DIN 15401, 5 t * Weight of boom: approx. 869 kg * Weight of pillar: approx. 872 kg * Weight of trolley: approx. 356 kg * Total weight of system: approx. 2,100 kg

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used BRANDT KD 68 CF Optimat edge banding machine from 2001. The machine is equipped with several processing units for complete edge processing. Among other things, it features pre-milling units, trimming units, radius milling cutters, corner copying devices, and pull knives for radius and surface finishing. Godpfozxy Nysx Afuebu Technical data / Equipment Manufacturer: BRANDT Type: KD 68 CF Optimat Year of manufacture: 2001 Machine no.: 0-261-02-8154 Control system: BRANDT NC 9 Feed speed: approx. 11 m/min Edge thickness: up to approx. 40 mm Voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Equipment: BRANDT NC 9 control system Pre-milling Trimming units Radius milling Corner copying Pull knives for radius processing Surface pull knife pneumatically controlled units Roller magazine / edge feeder Workpiece transport via feed chain Dust extraction connections on the processing units Central control via control panel Emergency stop The machine is currently still at the customer's site but would be immediately available! Transport is possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, For sale is a robust MAKA/Griggio surface planer, model AH 430. The machine features a robust, heavy-duty design and is suitable for professional use in carpentry, joinery, and woodworking. Technical data / Features: Manufacturer: MAKA/Griggio Model: AH 430 Planing width: 430 mm Year of manufacture: 1994 Motor power: 4.0 kW Connection: 380 V / 50 Hz / 3 phases long infeed and outfeed tables, total length approx. 2,600 mm 4-knife cutterblock CENTROFIX system with reversible knives adjustable fence manual chip thickness adjustment via handwheel dust extraction port motor brake GS-tested for dust emissions massive and robust construction The machine is in used condition, which is good considering its age. The surface planer was used as a training machine in a vocational school and is fully functional. The machine is subject to differential taxation. An inspection and demonstration can be arranged by appointment. Transportation is possible for an additional fee! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales, and changes reserved. All information without guarantee. Gbjdpfx Afjzvu Uxeuou

Condition: good (used), empty load weight: 1,855 kg, Year of construction: 2024, operating hours: 255 h, Kubota KX019 – Used mini excavator Year of manufacture: 2024 Operating hours: 255 Weight: 1855 kg Cabin with heating Work lights on boom/cabin Additional hydraulic hammer function Hydraulically adjustable undercarriage: 100/130 cm Dozer blade Anti-theft system Delivery and trade-in possible Mechanical quick coupler + 3 buckets Hydraulic quick coupler CW05 Trade-in and delivery possible €27,500.00 excluding VAT Also available (with leasing) with a Vlemmix machine transporter: ?keyword=vlemmix Gsdpfx Ajz N Ukrefusbu LEASING is possible for entrepreneurs: send your company registration number (for Belgium, your VAT number) via email/app and you will receive a non-binding quote/credit check as soon as possible. LEASE 60 months: €575 LEASE 72 months: €495 LEASE 84 months: €440

Condition: excellent (used), Year of construction: 2020, ACSYS Model: BARRACUDA® Custom Dual FL70S ACSYS Laser Processing System BARRACUDA® Custom Dual FL70S Fiber Laser – Industrial Laser System – Year of Manufacture 2020 For sale is a high-quality ACSYS laser processing system, model BARRACUDA Custom Dual FL70S, manufactured in Germany. The machine is in a very well-maintained condition and is a professional industrial system for precise laser marking, engraving, and material processing. The system is equipped with two air-cooled fiber lasers (2×70 W), making it ideal for series production, industrial marking, engraving, labeling, and processing of complex components. Thanks to its stable granite axis construction and fully enclosed safety cabin, the machine operates with the highest precision, reliability, and safety (Laser Class 1). Perfect for use in industry, metalworking, automotive suppliers, toolmaking, electronics, nameplates, DataMatrix codes, barcodes, serial numbers, and much more. Capabilities: - High-precision laser engraving and laser marking on metal and various materials - Series marking, nameplates, QR / DataMatrix codes, logos, numbering - Processing large layouts without misalignment (Large Field Removal Option) - 3D component processing possible - Camera positioning system for precise workpiece alignment Gbodpfxoyi Twgo Afueu - Automated processes / industrial integration possible (PLC, network, USB) - Low-maintenance, air-cooled fiber lasers with long service life - Fully enclosed, safe industrial system (Laser Class 1) Features / Options: - Camera system LAS – Live Adjust System HD - Large Field Removal (LFR) – processing large fields without misalignment - Industrial PC control with ACSYS Software Suite - Network / USB / PLC connectivity - Automatic door & safety monitoring - Lighting & signal beacon - Air-conditioned control cabinet - Fume extraction and filtration system for laser fumes - Extraction and filter unit (ULT LAS 1500) - Max. airflow: 3,240 m³/h - Nominal airflow: 1,200 m³/h - Max. negative pressure: 3,450 Pa - Power consumption: approx. 2.2 kW - Weight: approx. 300 kg Technical Data: Machine - Manufacturer: ACSYS Lasertechnik GmbH (Made in Germany) - Model: BARRACUDA® Custom Dual FL70S - Year of manufacture: 04/2020 - Laser: 2 × Fiber laser, 70 watts each (air-cooled) - Wavelength: 1055 – 1070 nm - Processing area: approx. 570 × 570 mm - Travel path: - X: approx. 875 mm - Y: approx. 600 mm - Z: approx. 190 mm Electrical Data: - Connection: 3AC / N / PE 400 V - Frequency: 50 Hz - Power consumption: approx. 5.5 kW Dimensions & Weight: - Cabin width: approx. 2050 mm - Cabin height: approx. 2300 mm (with signal beacon approx. 2600 mm) - Cabin depth: approx. 2850 mm - Total machine weight: approx. 3,800 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We are happy to answer further questions by phone.

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, Veneer Press JU 60 Press size: 2200 x 1200 mm Heating plate damaged (see photos), heating plate is functional Year of manufacture: 1965, heating 12 kW Loading costs extra (forklift rental approx. €500) Transport available at additional cost! Godpfxomhguao Afuebu

Condition: good (used), Year of construction: 1990, functionality: fully functional, Table spindle moulder TS110 Year of manufacture: 1990 380 Volt, 7.5 HP Milling fence with fine adjustment 4 spindle speeds: 3,000, 4,500, 8,000 and 10,000 rpm Reversible left/right rotation, brake Gbjdpfx Afov Im Swjuju Haffner 3-roller power feed, 4 feed speeds, Feed rollers new, Good condition – machine has been inspected Transport possible at extra cost! Due to the age of the used machine, warranty is excluded for commercial buyers.

Condition: excellent (used), Year of construction: 2023, Friulair CWE068 industrial chiller, manufactured in May 2023. For sale is a used, air-cooled industrial chiller from the manufacturer Friulair. The CWE series has been developed for industrial process and machine cooling as well as reliable continuous operation. Technical data: Manufacturer: Friulair S.r.l. Model: CWE068 Code: CWE068CQ27151 Year of manufacture: May 2023 Rated cooling capacity according to nameplate: 48.5 kW Operating conditions: Ambient air: 35 °C Water inlet: 12 °C Water outlet: 7 °C Refrigerant: R410A Filling quantity: 6.0 kg Refrigerant circuit: 3.2 liters CO₂ equivalent: 12.53 t GWP: 2088 Max. pressure HP: 41.5 bar Max. pressure LP: 29 bar Water circuit: Volume: 200 liters Max. operating pressure: 6 bar Temperature range: -10 °C to +30 °C Gsdpfx Afozy U Uasuebu Electrical data: 3 / 400 V AC ±10 % / 50 Hz Power: 24.1 kW Current consumption: 41.3 A FLA: 47.4 A Fuse: 63 A Protection class: IP54 Equipment: Air-cooled chiller with axial fans, integrated refrigerant and water circuit, buffer tank, circulation pump, high/low pressure gauges, water pressure gauge, main switch, as well as hydraulic inlet and outlet connections. Transport data: Dimensions (L × W × H): approx. 1,890 × 925 × 1,615 mm Weight: approx. 390 kg Condition: Used, manufactured in 2023. Optical condition as shown in the pictures. Scope of delivery: 1 x Friulair CWE068 chiller Equipment and connections as shown in the pictures. Shipping via freight forwarder possible. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2024, Stäubli TS2-40 SCARA industrial robot with CS9 controller and SP2 teach pendant Manufacturer: Stäubli Model: TS2-40 Robot year of manufacture: 02/2024 Controller year of manufacture: 02/2024 Machine type: 4-axis SCARA industrial robot Controller: Stäubli CS9-TS2-40 For sale is a used Stäubli TS2-40 SCARA industrial robot including CS9-TS2-40 robot controller, SP2 teach pendant and original robot connection cable. The compact robot system was designed for fast and precise pick-and-place, assembly, handling, and automation tasks. The system is suitable for, among other things, electronics manufacturing, machine assembly, packaging technology, laboratory automation, quality assurance, and general industrial applications. Technical data: Model: TS2-40 Robot type: SCARA robot Number of axes: 4 Robot year of manufacture: 02/2024 Reach: 460 mm Rated payload: 2.4 kg Maximum payload: 8.4 kg Z-axis stroke: 200 mm Repeatability XY: ±0.01 mm Repeatability Z: ±0.004 mm Repeatability Rz: ±0.002° Mounting type: Floor mounting Performance data: Maximum speed axis 1: 550°/s Maximum speed axis 2: 720°/s Maximum speed axis 3: 2,500 mm/s Maximum speed axis 4: 2,500°/s Cycles per minute: up to 240 Energy consumption according to VDMA 24608: approx. 0.397 kW Controller: Manufacturer: Stäubli Type: CS9-TS2-40 Controller: CS9 Controller year of manufacture: 02/2024 Controller version: Rack controller Teach pendant: SP2 Gjdpozlry Rsfx Afuebu Power supply: 1 × 230 V AC / 50–60 Hz Connection power: 1,700 VA Communication: Ethernet / PROFINET Device Software: VAL 3 activated Handheld device: Manufacturer: Stäubli Model: SP2 Version: Teach pendant / handheld device Touchscreen color display Integrated emergency stop switch Operation and programming of the robot system Power supply: 24 V DC / 0.5 A Date of manufacture: 11/2023 Connections: Controller power supply: 1 × 230 V AC / 50–60 Hz Power consumption: 1,700 VA PROFINET Device Ethernet Digital inputs and outputs Pneumatic connections on the robot Equipment: Stäubli TS2-40 SCARA robot Stäubli CS9-TS2-40 robot controller Stäubli SP2 teach pendant Original robot connection cable Pneumatic and electrical connections in the robot arm Ethernet interface PROFINET interface VAL-3 programming system Tool mounting according to images Accessories according to images Dimensions: Robot dimensions (W × D × H): approx. 400 × 300 × 650 mm Controller CS9 dimensions (W × D × H): approx. 600 × 500 × 270 mm Teach pendant SP2 dimensions (W × D × H): approx. 290 × 180 × 90 mm Maximum reach: 460 mm Z-axis stroke: 200 mm Shipping data: Robot weight: approx. 38 kg Controller weight: approx. 30 kg Total weight without additional accessories: approx. 68 kg Shipping dimensions complete (W × D × H): approx. 1,200 × 800 × 700 mm Shipping on a pallet recommended Condition: Used Year of manufacture 2024 Optical condition according to images. System start and information menus were tested. Robot system including controller and SP2 teach pendant. Scope of delivery: Stäubli TS2-40 SCARA industrial robot Stäubli CS9-TS2-40 controller Stäubli SP2 teach pendant Original robot connection cable Tool mounting Accessories according to images Availability: upon agreement. Scope of delivery as shown in the images. The table shown in the photos is not part of the sale. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2024, Stäubli TS2-40 SCARA Industrial Robot Manufacturer: Stäubli Faverges SCA Type: TS2-40 Robot Year of Manufacture: 05/2024 Machine Type: 4-Axis SCARA Industrial Robot Controller: Stäubli CS9 For sale is a used Stäubli TS2-40 SCARA industrial robot with CS9 controller and SP2 handheld device. This compact robot system is designed for fast and precise pick-and-place, assembly, handling, and automation tasks. The system is suitable for various applications, including electronics manufacturing, machine loading, packaging technology, laboratory automation, quality assurance, and general industrial applications. Technical data: Manufacturer: Stäubli Faverges SCA Model: TS2-40 Robot type: SCARA robot Number of axes: 4 Robot year of manufacture: 05/2024 Reach: 460 mm Rated payload: 2.4 kg Maximum payload: 8.4 kg Z-axis stroke: 200 mm Repeatability XY: ±0.01 mm Repeatability Z: ±0.004 mm Repeatability Rz: ±0.002° Mounting type: Floor mounting Performance data: Maximum speed axis 1: 550°/s Maximum speed axis 2: 720°/s Maximum speed axis 3: 2,500 mm/s Maximum speed axis 4: 2,500°/s Cycles per minute: up to 240 Power consumption according to VDMA 24608: approx. 0.397 kW Controller: Manufacturer: Stäubli Type: CS9-TS2-40 Controller: CS9 Controller year of manufacture: 04/2024 Controller version: Rackable Power supply: 1 × 230 V AC / 50–60 Hz Connected power: 1,700 VA Communication: Ethernet / PROFINET Device Software: VAL 3 activated Handheld device: Manufacturer: Stäubli Model: SP2 Touchscreen color display Integrated emergency stop switch Operation and programming of the robot system Power supply: 24 V DC / 0.5 A Equipment: Stäubli TS2-40 SCARA robot Stäubli CS9 robot controller Stäubli SP2 handheld device Robot and connection cables Pneumatic and electrical connections in the robot arm Ethernet interface PROFINET interface VAL-3 programming system Gripper mounting according to images RoboticsControls software / DVD Technical documentation Dimensions: Maximum reach: 460 mm Z-axis stroke: 200 mm Dimensions CS9 controller (H × W × D): approx. 270 × 445 × 365 mm Condition: Used Year of manufacture 2024. Gsdpfx Afozlhvuouobu Optical condition according to images. Scope of delivery: Stäubli TS2-40 SCARA industrial robot Stäubli CS9 controller Stäubli SP2 handheld device Robot cable and connection cables RoboticsControls software / DVD Technical documentation Accessories according to images Scope of delivery as shown in the pictures. The table shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Subject to changes, errors and prior sale.

Condition: excellent (used), Offer consisting of: complete compressed air system comprising SCC Flexi 55kW screw compressor, air-cooled, SCC DRA 480 refrigerant dryer, only about 2000 load hours, compressed air tank 1000 litres (OKS brand), year of manufacture: 2021 Gjdpfx Aoyl S Ebofuobu

Condition: excellent (used), Year of construction: 2023, Stäubli TS2-40 SCARA Industrial Robot Manufacturer: Stäubli Faverges SCA Type: TS2-40 Robot Year of Manufacture: 03/2023 Machine Type: 4-Axis SCARA Industrial Robot Controller: Stäubli CS9-TS2-40 For sale is a used Stäubli TS2-40 SCARA industrial robot with CS9 controller. This compact robot system has been designed for fast and precise pick-and-place, assembly, handling, and automation tasks. The system is suitable, among other applications, for electronics manufacturing, machine assembly, packaging technology, laboratory automation, quality assurance, and general industrial applications. Technical Data: Manufacturer: Stäubli Faverges SCA Model: TS2-40 Robot Type: SCARA Robot Number of Axes: 4 Gsdpfszlq E Ssx Afuobu Robot Year of Manufacture: 03/2023 Reach: 460 mm Rated Payload: 2.4 kg Maximum Payload: 8.4 kg Z-Stroke: 200 mm XY Repeatability: ±0.01 mm Z Repeatability: ±0.004 mm Rz Repeatability: ±0.002° Mounting Type: Floor Mounting Performance Data: Maximum Speed Axis 1: 550°/s Maximum Speed Axis 2: 720°/s Maximum Speed Axis 3: 2,500 mm/s Maximum Speed Axis 4: 2,500°/s Cycles per Minute: up to 240 Power Consumption according to VDMA 24608: approx. 0.397 kW Controller: Manufacturer: Stäubli Type: CS9-TS2-40 Controller: CS9 Controller Year of Manufacture: 03/2023 Controller Version: Rackable Supply: 1 × 230 V AC / 50–60 Hz Connection Power: 1,700 VA Communication: Ethernet / PROFINET Device Software: VAL 3 activated Equipment: Stäubli TS2-40 SCARA Robot Stäubli CS9-TS2-40 Robot Controller Original Robot Connection Cable (Robot ↔ Controller) Pneumatic and Electrical Connections in Robot Arm Ethernet Interface PROFINET Interface VAL-3 Programming System End-of-Arm Tooling according to Images Accessories according to Images Dimensions: Maximum Reach: 460 mm Z-Stroke: 200 mm Dimensions CS9 Controller (H × W × D): approx. 270 × 445 × 365 mm Shipping Data: Robot Weight: approx. 38 kg Controller Weight: approx. 30 kg Total Weight: approx. 68 kg Shipping Dimensions on Pallet (W × D × H): approx. 1,200 × 800 × 700 mm Condition: Used Year of Manufacture: 2023 Optical Condition according to Images. System start-up and information menus have been tested. A teach pendant is not included in the scope of supply. Scope of Supply: Stäubli TS2-40 SCARA Industrial Robot Stäubli CS9-TS2-40 Controller Original Robot Connection Cable (Robot ↔ Controller) End-of-Arm Tooling Accessories according to Images Scope of supply as shown in the images. The table shown in the photos, as well as any other items not expressly mentioned, are not included in the sale. Subject to change, errors and prior sale.

Condition: excellent (used), Vogt LABOPRESS P400S Laboratory Press / Hot Press Manufacturer: Vogt Maschinenbau GmbH Type: LABOPRESS Model: P400S Year of Manufacture: 2019 Machine Type: Hydraulic Laboratory Press / Hot Press For sale is a used Vogt LABOPRESS P400S laboratory press with a Siemens SIMATIC HMI touch control. This hydraulic stationary press is suitable for pressing operations under pressure and temperature, as well as for research, development, material testing, and applications in plastics and composite materials. Technical Data: Max. pressing force according to manufacturer: 660 kN Working area: approx. 450 × 450 mm Usable pressing area: approx. 400 × 400 mm Daylight: approx. 198 mm Max. hydraulic pressure: 230 bar Water pressure: 6 bar Air pressure: 6 bar Connected power: 27 kW Rated current: 63 A Mains connection: 3 × 400 V / 50 Hz Temperature control: Heatable press plates Manufacturer's specification for the basic model: up to 300 °C Plate cooling possible with water Cooling water connections available Dimensions: Machine dimensions according to manufacturer (L × W × H): approx. 1,300 × 700 × 1,900 mm Press area: approx. 400 × 400 mm Equipment: Siemens SIMATIC HMI touch panel PLC control Hydraulic four-column press unit Heatable press plates Water cooling / cooling water connections LAN interface Closed protective cover with viewing doors Emergency stop Manual / automatic operation Raising / lowering Heating / cooling Transport data: Dimensions: approx. 1,300 × 700 × 1,900 mm Weight: Manufacturer's specification not available – to be weighed before shipping Shipping by freight forwarder possible Condition: Used Optical condition according to pictures. Scope of supply: Vogt LABOPRESS P400S laboratory press Equipment and accessories as shown in the pictures Availability: upon agreement. Gedpfx Ajz Akm Rsfujbu Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2003, machine/vehicle number: IntNr231676, A high-performance and precise MIKRON UCP 800 Duro 5-axis machining center, manufactured in 2003, is for sale. Technical data Working area Travel in X-axis: 800 mm Travel in Y-axis: 650 mm Travel in Z-axis: 500 mm Number of CNC axes: 5 5-axis simultaneous machining: yes Control: HEIDENHAIN iTNC 530 Rotary table CNC-controlled rotary/tilting table Table dimensions: approx. 600 × 600 mm Max. table load: approx. 500 kg Rotary axis C: n × 360° Tilting axis A: approx. -100° to +120°, depending on the machine version Main spindle Gbjdpfxoz E N Txe Afuju High-performance spindle: STEP-TEC motor spindle Max. speed: 20,000 rpm Tool interface: HSK-A63 Spindle operating hours: approx. 22,000 h Spindle cooling: water-cooled Tool changer Tool magazine: 30 tool positions Tool interface: HSK-A63 Feed rate / dynamics Rapid traverse X/Y/Z: up to approx. 30 m/min The machine can be inspected on-site by prior arrangement. Subject to changes, errors and prior sale!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, ATM Model: ATM Brillant 255 ATM Brillant 255 Cut-off Machine 400V Metallography Laboratory 2019 Description: For sale is a professional cut-off machine ATM Brillant 255 – Year of manufacture 04/2019 Industrial unit designed for precise material sectioning in metallography, laboratory, and materials testing applications. The machine comes with a base cabinet and integrated coolant system. Several suitable cut-off wheels are included (see photos). Very robust professional quality Gbodszizp Aepfx Afuou Technical Data (as per nameplate): Model: Brillant 255 Year of manufacture: 04/2019 Manufacturer: ATM GmbH Electrical Data: Voltage: 400 V (three-phase) Frequency: 50 Hz Power: 12.5 kVA Fuse protection: 32 A Mechanical Data: Cut-off wheel: Ø 400 mm Max. wheel speed: approx. 3050 rpm Wheel bore: 32 mm The machine is mounted on a base cabinet with coolant tank Dimensions: Width: approx. 120 cm Depth: approx. 80 cm Height: approx. 150 cm Weight: approx. 450 kg Condition: Used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors!) For further questions, please feel free to contact us by phone.

Year of construction: 2019, condition: excellent (used), Vötsch ClimeEvent C/340/70/5/S Climate Testing Chamber (Special Edition)!! Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2019 Machine Type: Climate Testing Chamber / Temperature and Humidity Testing Chamber Test Chamber Volume: approx. 340 liters Description Gbsdpfxezp Nv Ds Afuou For sale is a used Vötsch ClimeEvent C/340/70/5/S temperature and climate testing chamber from 2019. This unit is a rare special edition with three side-pull-out telescopic test drawers. The test specimens can be conveniently prepared and connected outside the test chamber and then inserted into the test chamber. This makes the system particularly suitable for series testing, development tasks, long-term tests, and applications with frequent sample changes. Each test drawer features a stainless steel grid basket and a separately lockable front with its own test specimen port. The three separate test levels allow for a clear arrangement of several test specimens or assemblies within a single test chamber. The system is equipped, among other things, with WEBSeason Touch control, temperature and humidity control, Donaldson compressed air treatment, and extensive documentation. The system is suitable for: Temperature tests Climate tests Environmental simulation Material testing Electronics testing Component testing Battery testing Sensor testing Quality assurance Research and development Aging and stress tests Technical Data Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2019 Test Chamber Volume: approx. 340 liters Temperature Range: approx. -70 °C to +180 °C Temperature Change Rate: approx. 5 K/min Max. Heat Compensation: approx. 3,000 W Temperature Deviation (time-dependent): ±0.1 to ±0.5 K Temperature Homogeneity (spatial): ±0.5 to ±1 K Temperature Gradient: ≤2 K Power Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated Power: 9 kW Rated Current: 20 A Refrigerant 1: R449A – 2.50 kg Refrigerant 2: R23 – 0.75 kg Max. Low Pressure: 21 bar(g) Max. High Pressure: 25 bar(g) Stand Pressure R23: 13 bar(g) Dimensions External Dimensions (H x W x D): approx. 1,800 x 895 x 1,810 mm Test Chamber Dimensions (H x W x D): approx. 750 x 580 x 765 mm Weight: approx. 650 kg Equipment WEBSeason Touch Panel Temperature and Humidity Control Stainless Steel Interior Large Observation Window 3 side-pull-out telescopic test drawers 3 stainless steel grid baskets Separately lockable drawers Heated drawer ports Test specimen ports Donaldson Ultrafilter for compressed air treatment Shipping Information External Dimensions (H x W x D): approx. 1,800 x 895 x 1,810 mm Weight: approx. 650 kg Condition Used The unit has been workshop-tested and subjected to a documented test run. The optical condition corresponds to the images. Scope of Supply Vötsch ClimeEvent C/340/70/5/S Climate Testing Chamber 3 telescopic test drawers 3 stainless steel grid baskets Donaldson Ultrafilter Accessories according to images Shipping or forwarding possible. Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: good (used), empty load weight: 2,700 kg, Year of construction: 2024, operating hours: 475 h, Wacker Neuson DW40 wheeled dumper / dumper, used Year of manufacture: 2024 Operating hours: 475 Weight: 2700 kg Engine: 36 kW diesel engine Load capacity: 4 tons Speed: 25 km/h Dutch registration Volume, level: 1800 L Volume, heaped: 2300 L Water volume: 1190 L Turning radius: 4030 mm Dimensions (L x W x H): 4185 x 1780 x 2994 mm Fuel tank capacity: 45 L Trade-in and delivery possible Price: €38,500.- excluding VAT LEASING possible for businesses: please send your company registration number (for Belgium, please send your VAT number) by email or app, and you will receive a non-binding quote / credit check as soon as possible. Gbedpez N Upusfx Afueu LEASE 60 months: €745.- LEASE 72 months: €675.- LEASE 84 months: €575.-

Condition: used, Year of construction: 1966, 4-side planer HKM 16 Year of construction: 1966 Hydraulic feed, 6 spindles Gjdpfx Aownrgfefujbu Planing dimensions: 160x120 mm Transport available at additional cost!

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table width: 650 mm, For sale are 2 OPS Ingersoll EDM machines, model Gentry Eagle 500. The machines are being sold from a production facility, are in very good condition, and fully functional. Technical data: Year of manufacture: 2009 Operating hours: approx. 30,758 Available from: By arrangement Travel paths: X-axis: 525 mm Y-axis: 400 mm Z-axis: 450 mm (430 mm with Erowa) C-axis: controlled (0.001 mm resolution) Electrode holder (quill): Erowa ITS Work tank: 770 mm x 670 mm x 440 mm Table: 750 mm x 650 mm Accuracy: 0.005 mm to 0.015 mm Max. dielectric height: 395 mm Max. pallet size: 750 x 950 x 420 mm Max. workpiece weight: 1,000 kg Max. electrode weight: 100 / 50 / 15 kg Max. throat depth: 585 mm Equipment: - Filter system with 16m² paper candle - Compressor - Recooling unit Gbedpfxexrpm Us Afuju - Liftable tank with automatic tank refilling (ATA) - CO2 fire extinguishing system Machine weight: 3,640 kg (incl. generator and control panel) Operating weight: 6,450 kg (ready for operation) Footprint: 3,135 x 3,944 x 2,871 mm Options: - Pallet holder for four Power-Grip160 (not included in price) - Various 4-fold aluminum exchange pallets with chip - Various Erowa ITS electrode holders with chip Transport and loading can be organized Europe-wide at an additional cost upon request. Prices plus VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options please visit our website.

Year of construction: 2018, condition: excellent (used), Weiss Technik SaltEvent SC/UKWT 1000 Salt Spray Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000, with annular spray air Year of manufacture: 2018 Machine type: Salt spray chamber / Climate change testing system Test chamber volume: 1,028 liters For sale is a used Weiss Technik SaltEvent SC/UKWT 1000 salt spray chamber with integrated climate change technology, touch control, and annular spray air system. Gbedpfx Aezqab Tsfusu The system was developed for professional corrosion, salt spray, condensation water, temperature, and climate change testing. It is ideally suited for testing laboratories, the automotive industry, material testing, research, and quality assurance. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000 Year of manufacture: 2018 Test chamber volume: 1,028 liters Internal dimensions (W × D × H): 1,560 × 645 × 720 mm External dimensions (W × D × H): 2,925 × 980 × 1,370 mm Transport dimensions (W × D × H): 2,925 × 1,880 × 1,370 mm Weight: 650 kg Power connection: 3/N/PE AC 400 V (-10 % / +10 %) 50 Hz Electrical connection: 3P+N+PE 400 Vac 32 A Rated power: 9.4 kW Rated current: 19 A Refrigerant: R134a Refrigerant quantity: 1.30 kg GWP: 1,430 CO₂ equivalent: 1.86 t Max. low pressure: 17 bar(g) Max. high pressure: 25 bar(g) Air-cooled design Ethernet interface Test ranges: Salt spray test: Ambient temperature +5 °C to +50 °C Condensation water test: Ambient temperature +5 °C to +42 °C Climate test: +23 °C to +70 °C Drying / Ventilation: Ambient temperature +5 °C to +70 °C Humidity range climate test: 20 to 98 % r. F. Humidity range drying / ventilation: < 30 % r. F. Dew point range: +12 °C to +69 °C Consumption data: Water consumption salt spray test: approx. 0.4 l/h Water consumption condensation water test: approx. 34 l Consumption of spray solution: approx. 0.9 l/h Compressed air consumption salt spray test: approx. 1.4 m³/h Compressed air consumption ventilation: approx. 7.0 m³/h Temperature stability: ±1.0 K Equipment: Touchscreen control Annular spray air system Climate change test function according to VDA 621-415 Salt spray test Condensation water test Temperature test Climate test Drying and ventilation function Air-cooled cooling system Ethernet interface Automatic test programs Transport data: Dimensions (W × D × H): approx. 2,925 × 980 × 1,370 mm Transport dimensions (W × D × H): approx. 2,925 × 1,880 × 1,370 mm Weight: approx. 650 kg Condition: Used Optical condition as shown in the pictures. Scope of delivery: Weiss Technik SaltEvent SC/UKWT 1000 Integrated touch control Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: good (used), functionality: fully functional, Important note: The machine is currently still located at the customer's site – available at the beginning of 2027. Robust WEIMA ZM 30 twin-shaft shredder for shredding wood waste, offcuts, and similar materials. The machine features two slow-running shredding shafts and a generously sized feed hopper. Due to its low speed and robust design, the machine is well-suited for use in carpentry workshops, joineries, and wood processing companies. Technical data Manufacturer: WEIMA Maschinenbau GmbH Gbjdpfxjzxrxgo Afueu Type: ZM 30 Year of manufacture: 10/2002 Machine no.: 900-789 Motor power: 2 × 11 kW Total motor power: 22 kW Voltage: 400 V Frequency: 50 Hz Current consumption: 55 A Speed: 25 rpm Cutting width: approx. 460 mm Screen hole size: Ø 20 mm Hopper opening: approx. 600 × 1,240 mm Dimensions: approx. 1,490 × 1,290 × 1,970 mm Weight: approx. 1,300 kg Operating hours: approx. 4,188 hours according to the operating hour meter Equipment Twin-shaft cutting system 2 separate drive motors, each with 11 kW Large feed hopper Screen with Ø 20 mm holes Emergency stop Control cabinet / electrical control The machine can be inspected and tested under power by appointment. Transport is possible for an extra charge! Note The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty will be excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.

Condition: used, Year of construction: 2008, machine/vehicle number: IntNr231684, A proven bar feeder magazine LNS, model Hydrobar Sprint 552, is for sale. Manufacturer: LNS (Switzerland) Model: Hydrobar Sprint 552 Gjdpfxez E Ragj Afujbu Year of construction: 2008 Working range (diameter): Ø 5 mm to Ø 52 mm Guiding principle: Hydrobaric / hydrostatic bar guidance Feed drive: Servo drive Magazine system: Bar magazine with automatic bar following Application area: CNC lathes / automatic bar machines Design: Automatic bar loader / short and long material feed Bar length: approx. 3,200 Loading: Chain magazine Drive: Servo motor Control: PLC-/servo-controlled bar feed Oil capacity: approx. 80 liters, ISO 100 Subject to changes and errors in the technical data and specifications as well as prior sale.

Condition: good (used), Year of construction: 1988, functionality: fully functional, For sale is a robust and reliable Scheer DB5 dowel drilling machine / multiple-hole drilling machine for professional use in carpentry workshops, joineries, and in the furniture and interior design industries. The machine is ideally suited for precise dowel drilling and multiple-hole drilling in solid wood, chipboard, MDF, and other wood-based materials. Thanks to its robust industrial design, pneumatic workpiece clamping, and precise guide systems, fast, accurate, and consistently repeatable work is possible. The Scheer DB5 impresses with its ease of operation, high precision, and durable construction, making it ideal for daily use in the workshop. Technical data: Manufacturer: Scheer Type: DB5 Year of manufacture: 1988 Voltage: 400 V Pneumatic workpiece clamping Digital dimension display Adjustable stops with central adjustment Includes drill bit Precise linear guides Operation via foot switch Dust extraction connection available Robust steel construction Undercarriage with rollers Application areas: Dowel drilling Multiple-hole drilling Furniture construction Interior design Window and door construction Carpentry Joinery Series production The machine can be inspected and tested under power after prior appointment. Gedszr Egkopfx Afusbu Transportation is possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information is without guarantee.

Year of construction: 2018, condition: excellent (used), Weiss Technik SaltEvent SC/UKWT 1000 Salt Spray Testing Chamber Manufacturer: Weiss Umwelttechnik GmbH Gbsdpfx Aozzli Rofuju Type: SaltEvent SC/UKWT 1000, with annular spray air Machine Type: Salt Spray Testing Chamber / Climate Change Testing System Test Chamber Volume: 1,028 liters For sale is a used Weiss Technik SaltEvent SC/UKWT 1000 salt spray testing chamber with integrated climate change technology, touchscreen control, and annular spray air system. The system was developed for professional corrosion, salt spray, condensation water, temperature, and climate change testing. It is ideal for testing laboratories, the automotive industry, materials testing, research, and quality assurance. Technical Data: Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000 Year of Manufacture: 2018 Test Chamber Volume: 1,028 liters Internal Dimensions (W × D × H): 1,560 × 645 × 720 mm External Dimensions (W × D × H): 2,925 × 980 × 1,370 mm Transport Dimensions (W × D × H): 2,925 × 1,880 × 1,370 mm Weight: 650 kg Mains Connection: 3/N/PE AC 400 V (-10 % / +10 %) 50 Hz Electrical Connection: 3P+N+PE 400 Vac 32 A Rated Power: 9.4 kW Rated Current: 19 A Refrigerant: R134a Refrigerant Quantity: 1.30 kg GWP: 1,430 CO₂ Equivalent: 1.86 t Max. Low Pressure: 17 bar(g) Max. High Pressure: 25 bar(g) Air-cooled version Ethernet interface Testing Ranges: Salt Spray Testing: Ambient temperature +5 °C to +50 °C Condensation Water Testing: Ambient temperature +5 °C to +42 °C Climate Testing: +23 °C to +70 °C Drying / Ventilation: Ambient temperature +5 °C to +70 °C Humidity Range Climate Testing: 20 to 98 % RH Humidity Range Drying / Ventilation: < 30 % RH Dew Point Range: +12 °C to +69 °C Consumption Data: Water Consumption Salt Spray Testing: approx. 0.4 l/h Water Consumption Condensation Water Testing: approx. 34 l Consumption of Spray Solution: approx. 0.9 l/h Compressed Air Consumption Salt Spray Testing: approx. 1.4 m³/h Compressed Air Consumption Ventilation: approx. 7.0 m³/h Temperature Stability: ±1.0 K Equipment: Touchscreen Control Annular Spray Air System Climate Change Testing Function according to VDA 621-415 Salt Spray Testing Condensation Water Testing Temperature Testing Climate Testing Drying and Ventilation Function Air-cooled Cooling System Ethernet Interface Automatic Testing Programs Transport Data: Dimensions (W × D × H): approx. 2,925 × 980 × 1,370 mm Transport Dimensions (W × D × H): approx. 2,925 × 1,880 × 1,370 mm Weight: approx. 650 kg Condition: Used Optical condition according to pictures. Scope of Delivery: Weiss Technik SaltEvent SC/UKWT 1000 Integrated Touchscreen Control Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as pictured. Subject to changes, errors and prior sale.

Condition: good (used), Year of construction: 1966, Spindle moulder type 54F, year 1966, V-belt drive, reversible (left/right rotation), 4 spindle speeds, 30 mm spindle, 3 kW, transport dimensions 940 x 780 x 1200 mm, weight 480 kg. Transport available at extra cost! Gedpey E Nuhsfx Afujbu