Used Hb-Therm Series 4 Hb-140 U1 for sale (62,931)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Pgsdpfjyzxa Eox Aflsp Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. Psdpfxotvau Ae Afljgp All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: new, Year of construction: 2026, Size: 4 Nominal heat output: 116 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber fully lined with refractory bricks Suitable for rooms of: 2,900 m³ (according to DIN) Fuel: Logs, chipboard, wood chips, wood chip briquettes Fuel consumption: 30 - 35 kg/h Forced air supply, free-blowing: 7,500 m³/h Exhaust outlet: Ø 600 mm Flue gas connection: Ø 220 mm Weight: 1,550 kg Pgsdpfx Asdlhcdsflep PLC control cabinet: 380 volts

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 0-261-04-6588, functionality: fully functional, power: 21 kW (28.55 HP), workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, total length: 6,060 mm, overall weight: 2,600 kg, The machine comes with the following configuration: Emulsion spray at both infeed and outfeed Edge pre-heating Pre-milling unit: Tool diameter: 100 mm, Tool height: 63 mm, diamond tool with replaceable knives, motorized adjustment for removal Glue application unit: Glue and hot air application, heated application roller, quick-change feature for the entire unit, automatic position adjustment via motor, 3 pressure rollers, edge feed speed: 14 m/min End trimming unit: Twin-motor unit with automatic tilt up to 15°, THK prism guide Radius milling unit: 2 tools, automatic 2-axis adjustment, automatic overlap adjustment Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Pjdpjyu If Njfx Aflsgp Automatic return conveyor: Homag TFU 140 TECHNICAL DETAILS Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2,820 m³/h EQUIPMENT Double top pressure for part stability Electronic thickness control Frequency converter for feed Automatic lubrication of feed chain Automatic motor calibration Touch control panel

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, working width: 1,250 mm, pass-through height: 80 mm, UV System Venjakob - IST LIGNOCURE HL 140-4-N-DL, Year of Manufacture: 1999 (1990) POLYMERIZATION SYSTEM consisting of 2 UV dryers: Dryer 1 Overall length 2100 mm Overall width 2339 mm Workpiece dimensions min. 250x20 mm, max. 2500x1000 mm Workpiece height max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of the IST lamps 140 mm Rotating reflectors Lamp rating 80 W/cm2 per lamp Beam length 1400 mm Lamp power 2 x 11.2 kW Air-cooled housing, capacity 1600 m³/h (motor 1.2 kW) Compressed air consumption 6 NL/h Belt conveyor Vanjakob, Year of Manufacture 1999, Type Novo 40 Length 2100 mm Working width 1300 mm Working height 880 - 920 mm Feed 0.75 kW Feed speed 4 – 20 m/min (Line 2 - 4 m/min) Dryer 2 Overall length 3340 mm Overall width 2339 mm Workpiece dimensions min. 250 x 20 mm, max. 2500 x 1000 mm Workpiece height max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of the IST lamps 140 mm Rotating reflectors Lamp rating 80 W/cm2 per lamp Beam length 1400 mm Lamp power 2 x 11.2 kW Air-cooled housing, capacity 1600 m³/h (motor 1.2 kW) Compressed air consumption 6 NL/h Belt conveyor Vanjakob, Year of Manufacture 1999, Type Novo 40 Length 3340 mm Working width 1300 mm Working height 880 - 920 mm Feed 0.75 kW Feed speed 4 – 20 m/min (Line 2 - 4 m/min) Shared control cabinet for two drying tunnels 2000 x 16000 x 600 mm Operating voltage 400 V, AC, 50 Hz, 3 phases Total power of the complete UV system approx. 50 kW Operating side of the system on the left Weight of the complete system approx. 2500 kg Pgjdpfxeyalc Ns Aflop (Subject to change and errors in technical data, as well as prior sale)

Condition: used, Electric motor, three-phase motor, brake motor -Power: 0.45 kW -Speed: 1300 rpm Psdpfjdk I Tdjx Afljgp -Shaft: Ø 14 mm -Brake: 6 Nm -Construction: B3 -Protection class: IP 54 -Number: 1x available -Dimensions: 300/190/H145 mm -Weight: 8.7 kg

Condition: used, Electric motor, three-phase motor, brake motor -Power: 0.45 kW Pgedpfxjdk I Tce Aflsp -Speed: 1300 rpm -Shaft: Ø 14 mm -Brake: 6 Nm -Construction: B3 -Protection class: IP 54 -Foot damaged, see picture -Dimensions: 300/190/H145 mm -Weight: 8.7 kg

Condition: excellent (used), -Dimensions: 1440x2700x2600mm Psdpfxjwxmfwj Aflogp -Chariot 600x800 -N°série:9300041424 -Modèle:E8.64 -Année:06/2016 -Surface au sol: 2,71 m2 -Température max: 280°C -Passage de porte: 830 mm -Puissance de chauffe: 57kW -Tension:400V

Condition: excellent (used), -Dimensions: 1440x2700x2600 mm -Trolley: 600x800 -Model: E8/64 -Serial number: 9300038973 -Year: 04/2016 -Footprint: 2.71 m2 -Maximum temperature: 280°C Lroyjwxmf De Tdxuger Pgjdpjwxmf Djfx Aflep -Door clearance: 830 mm -Heating power: 57 kW -Voltage: 400 V -Weight: 1270 kg

Condition: good (used), The scope of delivery includes: 1x Depth bar, used Material color: raw Total length: approx. 1,110 mm Inner length: approx. 1,102 mm for stand depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: K 140 x 60 x 4 mm Crossbeam support: approx. 52 mm Unit weight: approx. 7.10 kg Your contact persons in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Psdpfxowl Ncfj Afljgp This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: good (used), Scope of delivery includes: 01x deep beam, used Material colour: black Total length: approx. 1,111 mm Internal length: approx. 1,103 mm for upright depth: approx. 1,100 mm Clear support width: approx. 1,000 mm Profile dimensions: K 140 x 50 x 4 mm Cross member bearing: approx. 52 mm Unit weight: approx. 7.26 kg Your contacts in our company: Podpjwwuchefx Aflogp Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply; these can be requested from us separately depending on delivery location or scope of supply.

Condition: used, Year of construction: 1991, Technical details: operating pressure: 160 bar distance between columns: 2000 mm throat: 1000 mm operating pressure: pneum. min/max 6/8 bar operating pressure: hydr. min/max 160/210 bar voltage: 380/50 V /Hz table surface area: 1900x1000 mm height over floor: 1000 mm tool clamping area: 1600x350 mm quantity of oil : 400 l total power requirement: 25,0 kW weight of the machine ca.: 7,1 t dimensions electric cabinet LxWxH: 1,0x0,3x1,4 m dimension machine xH: ca. L:2,2xB:3,4xH:2,2 m CLIP PUNCHING DEVICE or CUTTING PRESS or CLIP PRESS hydraulic - There are two machines on sale! - type of machine: folded punching device The machine has been used to punch holes in dashboards of cars. (incl. upper and lower tool) Pgsdpfxeu Icxdo Afljp On the table are mounted the material intake and the sliding unit for the cut and hole punching. equipment: - light curtain - hydraulic pack - electric cabinet - control panel - workpiece counter - manual- and automatic operation possible - emergency stop On sale as is. i.D. *

Year of construction: 1980, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1980 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 130 mm Rolling thickness 5x toproll Ø 140 mm Rolling thickness prebending 120 mm Top Roll Ø 950 mm Bottom Roll Ø Pgjdpfx Afokvm Szsljp 850 mm Side roll Ø 180 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 0 - 400 mm/min. Adjustment side rolls 0 - 400 mm/min. Number of driven rolls 2 Power 132 + 37 kW Dimensions (Estimate) Length 12000 mm Width 5440 mm Height 5650 mm Weight 286000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Three-roll – Round bending machine Akyapak ASM 140-20/4 Special equipment included in the price: hardened rolls motorized rear roll adjustment digital display sheet metal width 2050 mm sheet metal thickness 4.5 mm max. sheet metal thickness 4.0 mm for pre-bending roll length 2050 mm smallest diameter 210 mm Pjdpfx Aed R Iqxoflogp roll diameter - top 140 mm weight 1530 kg dimensions L-W-H 3220 x 1200 x 900 mm Equipment: top and bottom rolls electrically driven top roll can be swiveled out taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel safety cable foot switch operating manual in German CE marking / declaration of conformity

Year of construction: 2026, condition: new, Bosporas Machinery is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-performance and customized industrial solutions worldwide. Our compact coil slitting lines are designed for efficient and precise slitting of light and medium gauge materials. These systems offer flexible configurations ranging from entry-level compact lines to more advanced solutions with integrated straightening units. The lines are engineered to provide stable operation, consistent slit quality and optimized production efficiency while maintaining a compact footprint and cost-effective investment level. AVAILABLE CONFIGURATIONS 1 mm | 1300 mm | 4 Ton | Pitless Compact Slitting Line 3 mm | 600 mm | 6 Ton | Compact Slitting Line (Pinch Roller Feeding) 3 mm | 600 mm | 6 Ton | Slitting Line with Straightener Unit 3 mm | 1000 mm | 6 Ton | Compact Slitting Line (Pinch Roller Feeding) Pgjdpsyzbm Uofx Aflop SYSTEM CONFIGURATION OPTIONS Depending on production requirements, the line can be supplied with: Straightener unit for improved material flatness and feeding stability Pinch roller feeding system for compact and cost-effective operation Single pit or pitless design based on layout requirements TECHNICAL RANGE Material Thickness: 0.3 – 3 mm Coil Width: up to 1300 mm Coil Weight: 4 – 6 Ton Slitting Accuracy: ±0.1 mm MAIN LINE COMPONENTS Hydraulic decoiler (expanding mandrel system) Coil loading system (optional) Infeed system with pinch rollers or straightener unit Slitting head with precision knife adjustment Scrap winder system Tension unit and separator system Recoiler with hydraulic mandrel Electrical control and automation system (HMI controlled) ENGINEERING FEATURES High precision slitting performance Adjustable slitting knives with fine positioning system Robust gearbox-driven slitting head Stable tension control system Compact and modular machine design Bidirectional operation capability OPERATIONAL ADVANTAGES Flexible configurations for different budgets and needs Compact design for limited factory space Stable and continuous production Easy operation and maintenance Short lead time compared to European manufacturers APPLICATION AREAS Steel service centers Sheet metal processing companies HVAC and construction materials Automotive sub-suppliers General metal processing industries

Condition: excellent (used), For sale: a Lenze GSN04-1NHAR geared motor with a three-phase Lenze/WEG DERA071-32 motor, 0.37 kW. The unit is 100% functional, tested, and ready for operation. The technical condition is very good, with normal signs of use visible, consistent with its operation. This geared motor is ideally suited for driving conveyors, feeders, production machines, mixers, packaging machines, and many other industrial devices requiring a reliable drive. Technical data: Podpfxsznb Txs Aflogp Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Motor manufacturer: Lenze / WEG Motor type: DERA071-32 Power: 0.37 kW Power supply: 3×230/400 V AC Frequency: 50 Hz Motor speed: 1395 rpm Output speed: 140 rpm Torque: 22 Nm Gear ratio: i = 10 Protection class: IP55 Insulation class: F Duty type: S1 Condition: 100% functional – tested. Normal signs of use visible on the housing. Sold exactly as shown in the photos.

Condition: excellent (used), For sale: a Lenze geared motor with a worm gear. The unit is 100% functional, tested, and ready for operation. The technical condition is very good, with only normal signs of wear and tear resulting from use. It is ideally suited for driving conveyors, feeders, industrial machines, mixers, and other devices requiring a reliable drive with high torque. Technical specifications: Manufacturer: Lenze Motor type: DERA 071-22E Pgjdpfx Aoznb Ivjfljp Gearbox type: GSN04-1NHAR Power: 0.37 kW (50 Hz) Power supply: 3×230/400 V Frequency: 50 Hz Motor speed: 1400 rpm Output speed: 140 rpm Gear ratio: i = 10 Torque: 22 Nm Protection class: IP55 Insulation class: F Manufacturer: Lenze, Austria Condition: 100% functional – tested. Normal signs of use. Sold exactly as shown in the photos.

Condition: excellent (used), The DAGE Series 4000 Bond Tester is a professional device designed for performing Bond Pull and Die Shear tests in the semiconductor and electronics industries. This device is used in quality control laboratories, research and development departments, and during the production of microelectronic components. This unit is equipped with a precision positioning table, joystick controls, a keypad panel, and work lighting. The set also includes the original PCI control card (Baldor NextMove PCI-2 Motion Control Card) and additional electronic components visible in the photos, which are a valuable addition to the set. Technical data: Manufacturer: DAGE (Nordson DAGE) Model: DAGE Series 4000 Bond Tester Year of manufacture: 2010 Power supply: 110 / 230 V AC, 1-phase Frequency: 50/60 Hz Power: 250 VA Control: joysticks and keypad Precision XY positioning table Required compressed air: 4 bar (oil-free) Podpfxjzma Tbo Aflogp Vacuum connection Excellent visual condition. The set being sold is consistent with the presented photos and includes all visible components, including the additional PCI control card.

Condition: excellent (used), DAGE Series 4000 PXY – Bond Tester / Shear & Pull Tester for Connection Strength Testing Podezma Skspfx Aflsgp

Condition: used, mileage: 33,976 km, power: 100 kW (135.96 HP), first registration: 05/1990, fuel type: diesel, overall weight: 7,500 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2020, color: red, gearing type: mechanical, Year of construction: 1990, Equipment: air conditioning, all wheel drive, compressor, Unimog U 1400, equipped for dual-mode operation Manufacturer: Zweiweg Torque converter Wagon braking system, 600 tons Coupler bar mounting at the rear Pjdpfx Aoi R Aiceflogp

Condition: used, Pressure reducer, pressure regulator, bladder accumulator, high pressure bladder accumulator, hydraulic accumulator, pressure accumulator, membrane accumulator -Manufacturer: Hydac, pressure accumulator from CNC machining center MAHO MH 800C Pgsdpoq T T Ntofx Aflep -Type: SBO140-1.4E1/112U-140FT080 -Operating pressure: max. 140 bar -Quantity: 2x pressure storage available -Price per piece -Dimensions: Ø 145 x 205 mm -Weight: 3.7 kg

Condition: good (used), Year of construction: 1996, Field of application: Agriculture Empty weight: 7.500 kg Technical condition: good Visual appearance: good Production country: DE Please contact Vink Machinery for more information Unimog U1400 Rail Pgedpfszg N A Ssx Aflsp * 1996 * 142505 kilometers * Diesel * 4x4 * 7500 kg own weight * Equipped with snow plow * Equipped with sand/salt spreader * equipped with Rail wheels

Condition: ready for operation (used), functionality: fully functional, The unit comes with rotor and accessories !!! Podpfx Aszivxlofljgp ⚙️ Thermo Scientific Cytospin 4 — technical specs 🧪 Performance Speed range: 200 – 2000 rpm Max RCF: ~850 × g Capacity: up to 12 specimens per run Timer: 1 – 99 minutes Program memory: up to 23 stored routines 📏 Physical & electrical Dimensions (H × W × D): ~9.5 × 16 × 24.5 in (≈ 24 × 40.5 × 62 cm) Weight: ~12 kg (26.5 lb) Power supply: 100–240 V, 50/60 Hz Power consumption: ~150 VA max 🧠 Control & programming Digital keypad with programmable protocols Acceleration control (multiple ramp settings) Speed and time display windows Standby mode for power saving 🔒 Safety & design Auto-locking lid (won’t run unless locked) Imbalance / overspeed / lid alarms Sealed rotor head with viewing window Spill-resistant internal design Complies with IEC 61010 safety standard 🧬 Functional features Produces thin-layer cell deposition on slides Compatible with Cytospin 1–3 protocols Supports disposable or reusable sample chambers Designed for low-cellularity samples (e.g., CSF, urine) Good working condition. Please check out our other listings as well.

Condition: used, This listing is for Thermo Scientific Cytospin 4 Centrifuge. The unit is in full working condition and ready for immediate use. Power-On Verified The Thermo Scientific Cytospin 4 is a premier cell preparation centrifuge designed for thin-layer cell deposition. It utilizes centrifugal force to isolate and deposit cells onto microscope slides while maintaining cellular morphology. Features include a sleek design, simple touchscreen controls, and enhanced safety protocols. Transparency Report and Technical Audit: Pgodpfx Asza Dcbeflop Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Source Pedigree: Biotech / Research Facility • Integrity: 100% Original Parts (Non-Refurbished) • Condition: Direct-from-Bench (Decontaminated/Original)

Condition: ready for operation (used), Siemens 1GG5114-0KF41-6HU1 – Z shunt motor Z= see nameplate SN:E7486597702003, used, normal signs of wear, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Pgjdpfx Aox Dvctjflep