Used Heller 4-Axis Machining Center for sale (103,691)

Condition: used, Year of construction: 2013, x-travel 600 mm y-travel 600 mm z-travel 500 mm Control Siemens 840D weight of the machine ca. 18500 t dimensions of the machine ca. 5400x3800x3300 mm Gbedpfxoyan Sao Aixor Total power rating: approx. 133 kVA Backup fuse: 250A Compressed air quality according to ISO 85731: purity class 4 Connection pressure: max. 9.5 bar Operating pressure: min. 7 bar Number of spindles: 2 Spindle arrangement: vertical, side by side Spindle distance: 600 mm Spindle with max. 12,000 rpm Spindle bearing diameter: 90 mm Start-up time: 0-10,000 min-1 approx. 0.8 s Travel distance X-axis: 600 mm Travel distance Y-axis (alternating position): 600 (875) mm Travel distance Z1, Z2 axis: 500 mm Tool change system: Pick up Tool spindle: HSK 80 Tool positions: 70 Max. tool diameter: 90 mm Max. tool length: 540 mm Max. tool weight: 10 kg Max. magazine load: 350 kg

Condition: used, Year of construction: 2016, operating hours: 24,000 h, functionality: unexamined, machine/vehicle number: 466, Wenzler VKM 1-1 CNC Vertical 5-Axis Machining Center Description Type: CNC Vertical 5-Axis Machining Center Manufacturer: Wenzler Model: VKM 1-1 Year of Construction: 2016 Serial Number: 466 Condition: Used Quantity: 1 HS Code: 84571090 Item Description The lot includes: One CNC Vertical 5-Axis Machining Center and accessories Technical Data Machine History and Condition The machine was used as a demonstration machine from 2016 to 2022. From 2022, it was used in production at HAL Automotive Plauen GmbH for machining axle carriers. Before being put into operation in production, the machine was overhauled and upgraded. A new milling spindle was acquired in December 2024. The spindle has a running time of approximately 500 operating hours. Operating hours: approx. 24,000 hours Working Area X-axis: 1,500 mm Y-axis: 1,250 mm Z-axis: 880 mm Feed Rate / Rapid Traverse X-axis: 100 m/min Y-axis: 100 m/min Z-axis: 100 m/min Axis Acceleration X-axis: 7 m/s² Y-axis: 7 m/s² Z-axis: 10 m/s² Jerk: 150 m/s³ Table Load Maximum Workpiece Weight: 400 kg Spindle Tool Interface: HSK 100 Maximum Spindle Speed: 10,000 rpm Power, S6 / 40% Duty Cycle: 40 kW Maximum Torque: 175 Nm Tool Magazine Number of Positions: 36 Maximum Tool Length: 520 mm Maximum Tool Diameter with Empty Adjacent Position: 205 mm Maximum Tool Weight: 20 kg Maximum Total Magazine Load: 200 kg Tool Change Time: 3 seconds Equipment Included in the Scope of Supply Chip Conveyor Cooling Unit Cooling Unit Manufacturer: Lahntechnik GmbH Model: KESY 280-01 Serial Number: 2017-05981 Year of Construction: 2017 Rated Power: 13.6 kW Rated Voltage: 400 V / 3~ / PE / 50 Hz Control Voltage: 24 V DC Protection Class: IP54 Refrigerant: R410A – 10.03 t CO₂ equivalent Maximum Operating Pressure: 30 bar HD / 19 bar ND Dry Weight: 400 kg Country of Origin: Germany Not Included in the Scope of Supply The machine or the economic asset does not include product-specific tools, fixtures or robot grippers. Operational Status and Inspection The machine was taken out of production in October 2025 due to the factory closure. The machine is still connected to the power supply and can be inspected in this condition. However, a test run is not possible as no machine operator is available. Please view the videos recorded by the machine in December 2025. Gjdpfxjzrv Dgs Aixsbr Transport and Loading No special transport securing is required. Special lifting and transport equipment from Wenzler is required for loading and unloading. The buyer must rent this equipment directly from Wenzler / Heller Group. After lifting and unloading, the buyer is responsible for returning the equipment to Wenzler.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Control system: Siemens 840D-SL Tool positions: 160 Tool holder: HSK 63 Spindle speed: 10,000 rpm / 242 Nm Pallet size: 630 x 500 mm Gbedpfjzrl Dpsx Aixor Number of pallets: 2 X-axis: 800 mm Y-axis: 800 mm Z-axis: 1000 mm Table load capacity: max. 1000 kg

Condition: good (used), Year of construction: 2018, Technical details are shown on picture. Machine is in good condition. Gsdpfjzrniuox Aixebr Parts shown by hand not come.

Condition: used, machine/vehicle number: 008272, Position 1: 5 Axis CNC Routers BIESSE + KUKA-ROVER A + KR210 R3100 Position 2: Robot BIESSE + KUKA-ROVER A + KR210 R3100 Godpfxox A Tfvs Aixjbr

Condition: excellent (used), Year of construction: 2015, Mikron HPM 800U HD 5 axis Vertical Machining Centre, with 7 pallet changer (2015) Traverses XYZ: 800 x 800 x 550mm, 500 x 500mm table, A axis -91 / + 121 degrees, C axis, 360 degrees, Heidenhain TNC530, Spindle Speed 20,000rpm, 36kW Spindle Motor, HSK A63 Spindle Taper, 165 tools, Godpozm Ticsfx Aixsbr swarf conveyor, through spindle coolant,

Condition: excellent (used), Year of construction: 2006, 5-axis vertical machining center Brand: IBARMIA Type: ZVH45/L2200 Year: 2006 CNC: SIEMENS 840 D Specifications: Table surface: 2,600 x 800 mm X-axis travel: 2,200 mm Y-axis travel: 800 mm Z-axis travel: 860 mm Gbjdpfxjzq Ea Ie Aixer C-axis: 360,000 positions A-axis: +/- 105° (0.001°) Spindle speed: 15,000 rpm (HSK 63) Spindle power: 25 kW Equipped with: 30-position tool changer Chip conveyor Electronic handwheel SIEMENS SPIRSIN H/V rotary table, dia. 800 mm Through-spindle coolant

Condition: used, Year of construction: 2017, operating hours: 18,074 h, machine/vehicle number: 302-58, Travel ranges (X/Y/Z): 550/300/425 mm, spindle speed max.: 10,500 rpm, tool holder SK 40, machine weight: 6,500 kg, control system SIEMENS Sinumerik 840 D, chip conveyor KNOLL 600 K-1/320, belt filter system BÜRENER MASCHINENFABRIK KA M. TPF 150/510S, year of manufacture: 2017, rotary table. Drilling emulsion/lubricants must be extracted and disposed of by the customer in a professional manner. Gedszqy Utepfx Aixebr

Condition: used, Year of construction: 2007, operating hours: 70,859 h, machine/vehicle number: 15145361464, Travel ranges (X/Y/Z): 3,600/920/820 mm, with B-axis and integrated NC table, maximum spindle speed: 18,000 rpm, tool interface HSK-A63, 30-position tool changer, pendulum machining, control system SIEMENS Sinumerik 840 D Powerline, chip conveyor, emulsion separator, infrared measuring probe. The customer must ensure that drilling emulsion/lubricants are professionally extracted and disposed of. Gbedpfxjzqy Umj Aixsr

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, feed length X-axis: 762 mm, feed length Y-axis: 508 mm, feed length Z-axis: 508 mm, controller model: NGC, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, 5-axis machining is an effective method for reducing setups and increasing accuracy for multi-sided and complex parts. The Haas UMC Series universal machining centers offer cost-effective solutions for 3+2 machining and simultaneous 5-axis machining. The UMC-750SS features an integrated high-speed, dual-axis trunnion table with a 500 mm diameter platter, which includes standard T-slots and a precision pilot bore for versatile fixturing. The trunnion provides +120 and -35 degrees of tilt and 360 degrees of rotation, offering excellent tool clearance and a large part capacity. 5-axis simultaneous machining Powerful inline direct-drive spindle Gbedozr U N Uopfx Aixor High-speed trunnion table Includes a Wireless Intuitive Probing System

Condition: used, Year of construction: 2015, total height: 5,000 mm, total length: 9,000 mm, total width: 6,000 mm, overall weight: 85,000 kg, Year of Manufacture: 2015 Machine No.: 12300000163Control SystemHeidenhain iTNC 530 HSCI (3D path control)Travel PathsX: 2,700 mmY: 2,700 mmZ: 1,600 mmB-axis: controlled universal swivel milling headC-axis: NC rotary table Ø 2,200 mm5-axis simultaneous machiningSpindleMotor spindle SK50Speed: 20–12,000 min⁻¹Power: 44 kW (40% duty cycle) / 32 kW (100% duty cycle)Tool holder: SK50 according to DIN 69871Tool Changer63-slot wheel magazineDouble gripperEquipmentIKZ 40 barChip conveyorElectronic handwheelRotating viewing windowMinimum quantity lubrication (MQL)Coolant through spindleCoolant tank 980 lMold making packageActive chatter suppression (ACC)Adaptive feed control (AFC)Oil/emulsion mist separatorSmartkey packageAdditional safety viewing windows (Visiport)Operating mode 4 (process observation) Weight approx.: 85,000 kg Dimensions (LxWxH) approx.: 9000 x 6000 x 5000 mm Year of construction: 2,015 Condition: in working order Gbedpfxezqxkms Aixor Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: No

Condition: used, Year of construction: 2009, machine/vehicle number: 30008138, Travel ranges X/Y/Z: approx. 3,500 x 1,000 x 770 mm, table size: approx. 1,000 x 4,150 mm, power: 40 kVA, machine weight: 25,000 kg, chip conveyor AME, control system HEIDENHAIN ITNC620, rigid tool clamping plate approx. 1,200 x 3,500 mm, tool changer HSK-A63, 1 mobile workbench, 5-axis, 1-door, contents: hand tools. Gedpfx Aiozqzdvsxjbr

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 460 mm, controller model: FANUC Series 160is-MB, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel ranges X-axis: 600 mm Y-axis: 410 mm Z-axis: 460 mm A-axis: -120 to +30° C-axis: 360° Spindle Speed range: 100 to 12,000 rpm Speed stages: stepless Spindle mount: 7/24 taper, size 40 Spindle bearing inner diameter: 65 mm Distances Distance from table surface to spindle nose: 70 to 530 mm Distance from column front to spindle center: 620 mm Table Work surface diameter: 350 mm Maximum workpiece weight: 200 kg Height of table surface above floor: 1,080 mm Feed rate Rapid traverse X- and Y-axis: 48 m/min Rapid traverse Z-axis: 36 m/min Rapid traverse A-axis: 22.2 rpm Rapid traverse C-axis: 33.3 rpm Working feed rate X, Y, and Z-axis: 1 to 36,000 mm/min Gbjdpfjzpxgrsx Aixjr Working feed rate A-axis: 22.2 rpm Working feed rate C-axis: 33.3 rpm Tool changer Tool mount: JIS B 6339 BT40 Pull stud: MAS 403 P40T-1 Tool magazine: 20 tools Max. tool diameter: 110 mm Max. tool diameter with adjacent positions occupied: 82 mm Max. tool length from reference line: 300 mm Max. tool weight: 7 kg Tool change time, chip-to-chip: 1.2 s Tool change time, cut-to-cut: 3.8 s MACHINE DETAILS Control model: FANUC Series 160iS-MB

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231232, Hermle C600 U, year of manufacture 2004 Spindle new, with commissioning report Control system: - Heidenhain iTNC 530 - Control system operating hours: 68026 - Machine operating hours: 81237 - Spindle operating hours: 12429 Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool magazine positions Equipment: - Rigid clamping table - NC rotary table, 4th axis (iTNC) - Coolant system - Chip conveyor: none - Electronic handwheel (iTNC) - Tool breakage monitoring - Chip flushing nozzle - Foot switch for clamping/unclamping - Hydraulic unit for clamping/unclamping Travel paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z-axis (vertical): 450 mm Table: - Clamping area: 800 mm x 465 mm - Maximum table load: 250 kg Axes: - Axis rapid traverse: 35 m/min - Acceleration: 5 m/s² Godpfxezp Ihfe Aixsbr - Measuring system X/Y/Z: 0.1 µm Dimensions & Weight: - Machine weight: approx. 6.8 t - Machine dimensions (W x D x H): 2.5 m x 2.4 m x 2.43 m The machine can be inspected under power by appointment. Subject to changes, errors in technical data and specifications, and prior sale!

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 300-M270100, Schüco PBS profile machining center – 5-axis CNC, year of manufacture 2003, ready for immediate use TECHNICAL DETAILS X-axis travel: 6,650 mm Y-axis travel: 800 mm Z-axis travel: 500 mm X-axis feed rate: 0–40 m/min X-axis rapid traverse: 40 m/min Y- and Z-axis feed rate: 0–30 m/min Y- and Z-axis rapid traverse: 30 m/min B-axis rotation: 0–90° continuous C-axis rotation: 0–360° continuous B- and C-axis rotation speed: 10,000°/min Positioning accuracy within a macro: max. 300 mm ±0.1 mm Positioning accuracy over a 6,000 mm length: < ±0.15 mm MILLING Maximum tool dimensions for milling and drilling: Ø 50 mm, length = 60 mm Maximum tool dimensions for disc milling cutters: Ø 300 mm Maximum spindle motor power: 7 kW Gbjdpfx Asxr N Rmjixjr Disc milling cutter spindle motor power: 7 kW Spindle speed: 0–30,000 rpm Tool change time: < 15 s (clamp to clamp) Tool holder: HSK-E-40 steep taper Tool magazine: 9 plus 1 positions Total machine weight: 6.5 tons WORK AREA Number of clamping blocks: 8 units Clamping block positioning: automatic Maximum profile length for 3-sided machining: 6,650 mm Maximum profile length for 5-sided machining: 6,100 mm Maximum profile cross-section with maximum tool length: 300 mm x 230 mm

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram Gjdpfx Aoxpqy Dsixjbr - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, Year of construction: 2008, machine/vehicle number: 220028, CNC control: HEIDENHAIN iTNC 530, travel ranges: X-axis 4300 mm, Y-axis 1500 mm, Z-axis 1300 mm, table size 4970 mm x 1200 mm, max. table load 15,000 kg/m, tool holder ISO 50, multi-angle milling head 45°, automatic angular positioning of axes B and A, spindle motor power 22 kW, hydraulic rotary lock, working feed rate 10,000 mm/min, rapid traverse rate 20,000 mm/min, with coolant system, total spindle operating hours: 25,496 hours. Gjdpfx Ajzn A U Rsixjbr

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, controller model: Siemens 840D, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,100 mm Spindle speed: 8,000 rpm Pallet size: 630 × 630 mm Rotary table: 360,000 × 0.001° Godpfx Aozncndeixobr Tool positions: 400 Tool interface: HSK 100 Number of machining axes: 5 MACHINE DETAILS Control system: Siemens 840D

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Godpfju Tln Nsx Aixsbr Weight of the chip conveyor approx. 200 kg good condition

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Gjdpfxet Ac Efe Aixebr Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, feed length X-axis: 2,040 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 760 mm, total height: 3,500 mm, total length: 7,200 mm, total width: 4,000 mm, TYC FVP 2011 CNC Gantry Machining Center with Horizontal Head Main description PEGAS-GONDA s.r.o., a manufacturer of band saws, offers for sale a TYC FVP 2011 CNC gantry machining center with an interchangeable horizontal milling head. The machine was commissioned in 2007 and has been used exclusively in our production facility in a single-shift operation. It is fully operational, connected to power, and available for inspection under working conditions. Upon prior agreement, a test machining operation and a verification of the machine’s geometric accuracy can be arranged. The machine is being sold due to the modernization of our production technology. Technical specifications Manufacturer: TYC Model: FVP 2011 Machine type: CNC gantry machining center Year commissioned: 2007 Control system: Heidenhain Travel: X-axis: 2,040 mm Y-axis: 1,100 mm Z-axis: 760 mm Working table: Table dimensions: 2,000 × 1,000 mm Maximum table load: 3,500 kg Spindle and heads: Spindle taper: ISO 50 Vertical head speed: 6,000 rpm Horizontal head speed: 3,000 rpm Horizontal head indexing: 5° Tool magazine: Automatic tool changer Capacity: 40 tools Cooling: External coolant supply Internal coolant supply Machine condition Fully operational Connected and ready for demonstration Used in single-shift operation Test machining possible by prior arrangement Geometric accuracy inspection possible Technical documentation available Optional pallet clamping system A pallet clamping system with two pallets can also be supplied. One pallet is located inside the machine, while the second pallet can be used for workpiece preparation outside the machining area. This significantly reduces setup and preparation times. Price Machine price: EUR 82,000 net, plus VAT Optional two-pallet clamping system: EUR 4,167 net, plus VAT Gsdezp Iqajpfx Aixjbr Inspection and further information The machine can be inspected and demonstrated under power at our production facility in the Czech Republic. Additional photographs and technical documentation are available upon request. A personal inspection, test machining, and geometric accuracy verification can be arranged for serious prospective buyers. Location: Slavkov u Brna, Czech Republic Seller: PEGAS-GONDA s.r.o.

Condition: used, Year of construction: 2011, travel -x axis 650 mm travel -y axis 600 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 18.000 U/min NC rotary indexing table Ø 630 mm numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The machine has only 13.924 H spindle hours. The machine is in a well-maintained condition. Gbjdpfx Aijzczhajxer Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U

Condition: used, Year of construction: 2007, travel -x axis 650 mm travel -y axis 600 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 Gbodpfjzaf Hujx Aixor number of spindle speeds 10.000 U/min NC rotary indexing table Ø 630 mm numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U

Condition: used, Year of construction: 2006, total height: 5,000 mm, total length: 7,500 mm, total width: 6,000 mm, overall weight: 45,000 kg, Machine No.: 10990003463Control SystemHeidenhain iTNC 530 (3D path control)Travel PathsX: 1,850 mmY: 2,000 mmZ: 1,100 mmB-axis: controlled universal swivel milling headC-axis: NC rotary table Ø 1,700 mm5-axis simultaneous machiningSpindleMotor spindle SK50Speed: 25–12,000 rpmPower: 44 kW (40% duty cycle) / 32 kW (100% duty cycle)Torque: 288 / 187 NmTool holder: SK50 according to DIN 69871Tool Changer60-slot tool magazineDouble gripperEquipmentIKZ 40 barChip conveyorTool measurement system Blum Laser NT HybridHeidenhain TS 640 infrared probeElectronic handwheelMinimum quantity lubrication (MQL)Oil/emulsion mist separatorCoolant through spindleCoolant tank 980 lATC (Application Tuning Cycle)Laminated safety glass windowOperating mode 4 (process observation) Travel Y-axis: 1800 - mm Godpfxjzm Dw Rs Aixsbr Weight approx.: 45,000 kg Travel Z-axis: 1170 - mm Travel X-axis: 2000 - mm Dimensions (LxWxH) approx.: 7500 x 6000 x 5000 mm Year of construction: 2,006 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: No

Condition: excellent (used), Year of construction: 2001, Technical specifications: 5-axis machine: X, Y, Z, C, A Travel ranges (X/Y/Z): 500 / 450 / 400 mm Travel range A-axis: +108 / -5° Travel range C-axis: 360° CNC control: HEIDENHAIN Table diameter: 500 mm Table adjustable in degrees Maximum workpiece weight: 200 kg Number of positions in the tool changer: 30 Spindle speed: 20 – 30,000 rpm Motor power: 15 kW Dimensions (length x width x height): approx. 3700 x 2850 x 2800 mm Machine weight: approx. 5.8 tons Additional equipment: Chip conveyor Gsdezl S Uzjpfx Aixsbr Various tools Condition: Very good condition, little used Operating hours: 2,700 Machine is still in operation The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.