Used Horizontal Band Saw Machine for sale (69,407)

Condition: good (used), Year of construction: 2010, machine/vehicle number: F3554, Offer 25228 Hydraulic horizontal band saw machine with two-column guidance Technical data: - Automatic cutting process, hydraulic lifting/lowering of the saw frame - Hydraulic material feed system - Saw band dimensions: 4400 x 34 x 0.9 mm - Cutting speed, infinitely adjustable: 15 - 88 m/min Kjdpfjwvrvijx Andona - Cutting pressure, infinitely adjustable: 10 - 15 bar - Lowering speed: 0 - 300 m/min - Cutting range: 90° - At 90°: round material: 360 mm - At 90°: square/flat material: 360 x 430 mm - Hydraulic material clamping - Hydraulic material feed system - Coolant system - Drive: 400 V / 3 kW - Space requirement: approx. W 2200 x H 1850 x D 1300 mm - Weight: approx. 1100 kg - Roller conveyor: 2000 mm

Condition: good (used), Year of construction: 2000, Offer 24477 Ksdpoy H Dmhofx Andsna Technical Specifications: - Cutting range at 90° round: 220 mm - flat: 250 x 100 mm - square: 170 x 170 mm - Cutting range at 45° round: 150 mm - flat: 150 x 150 mm - Mitre adjustment left and right - Saw blade dimensions: 2890 x 27 x 0.9 mm - Cutting speeds: 40 + 60 m/min - Hydraulic lowering of the saw frame - Infinitely adjustable cutting pressure: 0 - 10 m/min - Total drive power: 400 V / 1.5 kW - Installation space approx.: W 1500 x H 1000 x D 650 mm - Weight approx.: 250 kg

Condition: good (used), Year of construction: 1997, machine/vehicle number: 97-04002, Offer 25114 Technical specifications approx.: - Roller diameter 500 mm - Throat depth 500 mm - Max. clearance height 400 mm - Table size 630 x 530 mm - Table tilts 10/30° Knjdowmnz Njpfx Andsa - Table height from floor 950 mm - Saw blade length approx. 3900 mm - Saw blade width approx. 3 - 25 mm - Cutting speeds (presumably) 81 - 145 - 208 - 267 m/min - Drive 400 V / 1.1 kW - Weight approx. 400 kg - Space required approx. W 750 x H 2000 x D 1000 mm

Condition: good (used), Year of construction: 1999, machine/vehicle number: 6410/102/051, Offer 25325 Technical Data: - Cutting capacity at 90° - round: 320 mm - flat: Width 500 x Height 300 mm - Mitre adjustment – right & left up to 60° - Cutting capacity at 45° – left & right: 320 mm - flat: 304 x 300 mm - Material support height approx. 750 mm - Saw blade dimensions: 5090 x 34 x 1.1 mm - Cutting speed infinitely adjustable: 17 to 90 m/min - Cutting pressure infinitely adjustable: 0 – 10 m/min - Total drive power: 400 V / 4.0 kW - Motorised chip removal brush - Hydraulic lifting/lowering of the saw frame - Hydraulically operated movable workpiece vice - Hydraulic mitre adjustment with digital angle display - Swarf conveyor Kedpfx Aoxph E Rsndsna - Motorised infeed roller conveyor KASTO, 10 m - Outfeed roller conveyor KASTO with length stop, 6 m - Required space approx.: W 1300 x H 1400 x D 3100 mm - Machine weight approx.: 1800 kg - Roller conveyor weight approx.: 3500 kg

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108401 23-D, Offer 25318 Technical Data: - Manual bandsaw machine - Bandsaw blade dimensions: 2375 x 20 x 0.9 mm - 2 cutting speeds: 33 / 66 rpm - Max. clamping capacity: 205 mm - Mitre adjustable left & right: 30° - Cutting range: - 90°: round 160 mm Knodpfx Asxta N Aondoa - square 160 mm - flat 200 x 100 mm - 45° left & right: round 140 mm - flat 140 x 60 mm - Drive: 400 V / 1.5 / 1.8 kW - Coolant system - Discharge roller conveyor with stop: 3000 mm - Infeed roller conveyor: 1500 mm - Weight: approx. 350 kg - Space requirement: approx. W 1100 x H 1700 x D 1550 mm

Condition: good (used), Year of construction: 1981, machine/vehicle number: 11790-81, Offer 23402 Technical data: - Roller diameter 420 mm - projection 400 mm - max. passage height 325 mm Knedpfx Aneri R Azedja - Table size 600 x 600 mm - Table can be tilted left / right 10° / 45° - Table height from floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Band width max. 25 mm - infinitely variable band speed 15 - 1500 m/min - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - with: - IDEAL saw blade welding unit - lighting

Year of construction: 2015, condition: new, functionality: fully functional, machine/vehicle number: 051, We offer this new Kohlbacher BARACUDA 750 side grinding machine for band saws, year of construction 2015. Manufacturer: Kohlbacher GmbH Model: BARACUDA 750 Serial number: 05N Type: BARACUDA 750 Manufacturing date: 06/2015 Kjdszuc Uqspfx Andena Construction year: 2015 Condition: new Technical details: - CNC control - Bosch Rexroth controller - Central electrical blade height adjustment - Saw blade clamping system, clamps the blade automatically tight when grinding - Grinding wheel is direct driven, eliminates vibrations and deep pass (heavy removal) operation is possible - Grinding heads are guided by pre loaded ball rail systems to assure optimum accuracy - Width of band saw blades 30 – 260 mm - Blade thickness 0,6 – 2 mm - Pitch min./max. 15 – 60 mm - Working speed 0 – 12 Teeth/min. - Grinding wheel diameter 125 mm CBN - Grinding wheel motor 2 x 1,5 kW - Pump cooling system 60 l/min. - Weight 1050 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2015, condition: new, functionality: fully functional, machine/vehicle number: 016, We offer this new Kohlbacher STINGRAY Stellite tipping machine for band saws, year of construction 2015. Manufacturer: Kohlbacher GmbH Knjdpozuc Ttofx Andja Model: STINGRAY Serial number: 016 Construction date: 03/2015 Technical details: - Plasmawelding (TIG) - Fully automatic tipping. - Melts hard facing material in copper mould that are preformed to suit the teeth of the saw blade. - Anealing with gas or inductive. - for any type of tooth shape or division, and variable pitch assemble. - width of band saw blades 50-380 mm - Blade thickness 0,6 – 5 mm - Pitch adjustable 20 – 100mm - Working speed adjustable 0 – 20 Teeth/min. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2011, functionality: fully functional, working width: 1,015 mm, cutting height (max.): 310 mm, cutting width (max.): 1,015 mm, FICEP KATANA K100 + K60 - TWO REFURBISHED STRUCTURAL-STEEL BAND SAWS | BUNDLE OFFER Two automatic Ficep mitre band saws of the Katana series: the K100 (year 2011, profiles up to approx. 1000 mm) and the smaller K60 (profiles up to approx. 600 mm). Both designed for economical cutting of solid material, profiles and tubes in steel and non-ferrous metals. AVAILABLE INDIVIDUALLY OR AS A PACKAGE. CONDITION & REFURBISHMENT Kjdpfswd Ugtex Andena Both machines have been overhauled and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies per machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machines reconditioned - no demonstration under power). FUNCTION & APPLICATION Automatic mitre band saws for profile processing in structural steelwork: beam, tube and flat material as well as solid material in steel, aluminium and non-ferrous metals. Motorised feed with infinitely variable cutting speed, hydraulic clamping systems, CNC-controlled mitre cuts and cutting programs. The K60 is additionally prepared for the DSTV data interface (import from CAD/CAM). Applications: steel fabrication shops, steel and semi-finished trading, industrial pre-fabrication. --- MACHINE 1: FICEP KATANA K100 (YEAR 2011) --- Horizontal CNC mitre band saw for large structural-steel cross-sections. Hydraulic blade tensioning, dual automatically pre-settable blade guidance, integrated cooling/lubrication. - Year: 2011 | Serial number: 33111 - Cutting width at 90 deg: 1015 mm | Cutting height at 90 deg: 310 mm - Min. profile size at 90 deg: 60 x 10 mm - Cutting width at +/-45 deg: 610 mm | Cutting height at +/-45 deg: 310 mm - Max. mitre angle: +/-60 deg - Saw blade: 7880 x 41 x 1.3 mm | Blade speed: 60-170 m/min - Blade motor: 9 kW | Control: Ficep CNC - Hydraulic blade tensioning, dual blade guidance (fixed/mobile side) - Synchronised cleaning brush, integrated cooling/lubrication system - Hold-downs and workpiece vices: hydraulic, independent --- MACHINE 2: FICEP KATANA K60 --- Horizontal CNC double-mitre band saw for medium cross-sections. Hydraulic horizontal and vertical clamping, minimum-quantity lubrication, Mitrol CNC with Pegaso software. - Year and serial number: on request (to be confirmed on the name plate) - Cutting range at 90 deg: 610 x 310 mm - Cutting range at 45 deg: 400 x 300 mm | at 60 deg: 250 x 250 mm - Mitre angle range: +45 / -60 deg | Min. profile height: 60 mm - Saw blade: 34 x 1.1 x 6350 mm - Blade motor: 7 kW | Control: Mitrol CNC, Pegaso software - Data interface: DSTV | Remote diagnostics via network - Hydraulic horizontal/vertical clamping, minimum-quantity lubrication (MQL) - Operating mode: standalone or as combined line with drill unit Machine weights and dimensions for both machines follow on request. LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further Ficep machines on request. CONTACT / INQUIRY Price on request - individually or as a bundle | Viewing by arrangement. Sale exclusively to commercial customers (B2B).

Condition: good (used), Year of construction: 1998, machine/vehicle number: 19188-98, Offer 25416 Technical data: - Cutting range at 90° round: 260 mm - Cutting range at 90° flat: 410 x 200 mm - Miter adjustable left + right: 90 to 30° - Cutting range at 45° right + left round: 220 mm - Cutting range at 45° right + left flat: 230 x 300 mm - Material support height: approx. 620 mm - Saw band dimensions: 3660 x 27 x 0.9 mm - Cutting speed: 17 - 106 m/min Kedpszqtwuofx Andsna - Hydraulic lifting and lowering of the saw frame - Upper stroke limit of the saw frame - Cutting pressure continuously adjustable: 0 - 10 m/min - Hydraulic material clamping device - Saw band cleaning brush - Micro-spray coolant system - Total drive power: 400 V / 1.9 kW - Roller table length: 3300 mm - Space requirement with base frame: W 5200 x H 1600 x D 2000 mm - Weight with base frame: 1900 kg

Condition: new, Year of construction: 2026, Metal Cutting Band Saw CORMAK S-200RH The CORMAK S-200RH metal cutting band saw is a modern semi-automatic band saw designed for intensive operation in the metalworking industry. It enables cutting at angles from -45° to +60°, providing high precision, repeatability, and efficiency even when processing heavy sections. The machine combines precise blade guidance with automation of key functions, including hydraulic arm lifting/lowering and hydraulic vice control. Main advantages of the machine Hydraulic arm movement control (up/down) with smooth adjustment of lowering speed. Arm position memory function – automatic return to a predefined height. Swivelling saw arm from -45° to +60° with a clear angle scale. Hydraulic quick-clamping vice – suitable for cutting profiles and solid materials. Heavy cast iron saw arm – ensures rigidity and operational stability. Efficient coolant pump with closed-loop cooling system. CE safety system – including limit switches and emergency stop button. Construction and technology The band saw is built on a stable steel base with an integrated hydraulic unit and coolant tank. The saw arm is made from a single-piece cast iron construction, providing high resistance to vibration and twisting, which directly improves cutting quality. The blade guides are equipped with carbide inserts and roller bearings, ensuring accurate alignment and straight cutting of processed materials. A high-performance ABB M3V series motor and worm gear transmission provide two cutting speeds for optimal adaptation to different materials. Precision and work efficiency The machine enables fast and repeatable cutting of pipes, profiles, and solid materials, including very small sections starting from Ø5 mm. Automation of the cutting process (arm movement and hydraulic vice operation) significantly reduces operating time and minimizes operator involvement. The integrated blade cleaning brush maintains proper working conditions and extends blade service life. Applications The CORMAK S-200RH model is designed for: production workshops, steel construction plants, machine manufacturing industries, maintenance departments. It is particularly suitable as a band saw for pipes and profiles in serial production and applications requiring high cutting accuracy and repeatability. Standard equipment Control console mounted on a separate pedestal Integrated hydraulic power unit Hydraulic vice Automatic arm lifting and lowering with position memory function Blade cleaning brush Coolant system with pump Bimetallic band saw blade Technical documentation (DTR) and CE declaration of conformity Optional equipment Material feeding rollers Laser cutting line guidance system Extended cutting length measurement system Knedpfxsi D D A Ss Andsa Semi-Automatic Metal Cutting Band Saw CORMAK S200RH Technical data Parameter Value Machine type Semi-automatic band saw Arm lifting and lowering Hydraulic, smooth adjustment Blade speed 36 / 70 m/min Angular cutting range -45° to +60° Vice Hydraulic Minimum cutting diameter Ø5 mm Minimum material length in vice 30 mm Vice base height 780 mm Cutting blade dimensions 27 × 0.9 × 2910 mm Total motor power 2.1 kW Machine dimensions (L × W × H) 1600 × 800 × 1400 mm Weight 530 kg

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 300 mm saw band length: 3200 mm saw band width: 27 mm dimensions of saw-band: 3660 x 25 x 0,9 mm electrical connection: 400/50 V / Hz. total power requirement: 1,1 kW work height max.: 650 mm machine weight approx.: 960 kg cutting speed: 15 - 95 m/min Kedjzp Iu Sepfx Andena dimension machine approx.LxWxH: 2,2 x 2,0 x 1,3 m The Klaeger & Müller HBA 300 G CNC is a robust, hydraulically operated CNC horizontal band saw designed for precise and economical cutting of solid materials, tubes, and profiles made of steel, stainless steel, aluminum, and non-ferrous metals. Thanks to its CNC control system, it enables the automatic processing of production batches with high repeatability and productivity. The machine is equipped with a hydraulic material feed, automatic saw feed, and infinitely variable blade speed adjustment, allowing optimal machining of a wide variety of materials. Its rigid machine construction ensures smooth, low-vibration operation, excellent cutting quality, and extended saw blade life. In addition, the band saw is fitted with a coolant system that improves blade life and ensures clean, accurate cutting surfaces. The Klaeger & Müller HBA 300 G CNC is particularly suitable for industrial applications in metal fabrication shops, steel construction, toolmaking, mechanical engineering, and serial production. *

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Horizontal thin-cutting band saw 300 mm working width, tillable 12 degrees New 2025 model with bigger wheels and inverters on wheels. 80 mm blade width Touchscreen Schneider, PLC and Inverters Schneider Germany 22.0 KW saw motor Bigger wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm Kodozlqvqopfx Andjna * same as new *

Condition: good (used), Year of construction: 1982, Cutting capacity 90° round 320 mm square 320 x 320 mm rectangular 540 x 200 mm Cutting capacity 45° round 175 mm square 175 x 175 mm Kjdpsxztfasfx Andena rectangular 150 x 270 mm Main motor 1.5 kW Cutting speed, stepless 17 - 120 m/min Saw blade size 3660 x 27 x 0.9 mm Dimensions L x W x H 1900 x 1000 x 1200 mm Net weight 410 kg Accessories / Special Features: • Semi-automatic version • Raising and lowering of the saw frame • Hydraulic saw pressure regulation • Hydraulic material clamping • Automatic opening and closing of the clamping jaws • Cutting speed steplessly adjustable between 17 - 120 m/min • Automatic cutting pressure regulation • Material stop length 500 mm • Coolant system • Mitre swiveling device: The entire machine can be easily and quickly swiveled steplessly The workpiece clamping cylinder and the cutting pressure regulator have been newly resealed by us. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2026, The professional CORMAK BS912N metal bandsaw is a robust and precise machine designed for cutting tubes, profiles and solid elements. The model allows cutting materials with a diameter of up to 230mm and operation at angles from 0° to 45°. Automatic downfeed of the saw arm, lowering adjustment by means of a hydraulic cylinder, a cooling system and a stable cast iron construction make this machine ideal for metalworking shops, production workshops and craft workshops. Knedpoy En E Ssfx Andja CORMAK BS912N metal bandsaw – precise angled metal cutting The CORMAK BS912N metal bandsaw is a professional machine designed for precise cutting of tubes, profiles and solid elements. Its solid construction, automatic tool downfeed and hydraulic adjustment of the saw arm lowering ensure convenient operation, repeatability and high cutting quality. The BS912N model allows cutting of materials with a diameter of up to 230 mm and making angled cuts in the range from 0° to 45°. This makes the machine suitable for metalworking shops, production workshops and anywhere that accuracy, stability and machining speed matter. Main advantages of the machine Automatic tool downfeed increasing convenience and cutting repeatability Hydraulic adjustment of saw arm lowering using a cylinder and an oil flow control valve Cutting at angles from 0° to 45° thanks to the swivelling vice Heavy cast iron vice ensuring stable clamping of the material Blade guides with carbide inserts and bearings affecting cutting accuracy and quality Cooling system supplying coolant to the blade and the cut element Wire brush cleaning the blade preventing the blade from clogging Automatic drive shut-off after completion of the cut by means of a limit switch Construction and technology The material to be cut can be fed manually or by means of any mechanical device. The tool feed is automatic, which makes the operator’s work easier and allows stable, repeatable results to be achieved. The lowering speed of the saw arm is adjusted by means of a hydraulic cylinder. The appropriate speed is obtained thanks to a valve regulating the oil flow between the cylinder chambers. This solution makes it possible to adapt the machine operation to the type of material being processed and the expected cutting precision. The required linear blade speed is obtained by changing the ratio on the belt pulleys between the worm gearbox and the drive motor. In the machine base there is a coolant tank with an electric pump, responsible for effective cooling of the blade and the workpiece. Equipment and functions Automatic tool downfeed Hydraulic adjustment of saw arm lowering Swivelling vice with angle scale Quick vice clamp Convenient handle for blade tensioning Blade tension indicator Table for selection of blade tooth pitch and cutting speed Cooling system for the blade and cut material Wire brush cleaning chips from the blade Blade guides with carbide inserts and bearings Automatic limit switch after cut completion Emergency stop of the “mushroom safety” type Technical data Motor 230 V, 50 Hz, 1100 W / 400 V, 50 Hz, 1100 W Blade dimensions 2655 x 27 x 0.9 mm Blade speeds 24 / 36 / 49 / 71 m/min Cutting angle range from 0° to +45° Machine package dimensions 1420 x 500 x 1150 mm Weight 151 / 202 kg Angle 0° Ø 229 191 x 305 max. 355 230 x 230 45° Ø 160 230 x 140 155 x 155

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Knedpfjmrp Tlsx Andoa Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Knsdpsudi Uzsfx Andea Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. Kodpeudi Unofx Andena The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Knedpomrnk Esfx Andea Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg

Condition: new, Year of construction: 2026, The CORMAK MCB350HD Metal Band Saw is a professional-grade metal cutting machine designed for precise mitre cutting from -45° to +60°. Equipped with a heavy-duty cast iron saw bow and a gravity-fed hydraulic feed system, it is ideal for both small-batch and high-volume production. Its rigid construction and premium components enable efficient cutting of structural steel, stainless steel, tool steel, solid bars, pipes, and hollow sections. The machine is equipped with a quick-action vise lever, allowing fast and convenient workpiece clamping. Key Features Mitre cutting range from -45° to +60° – ideal for cutting pipes, profiles, and solid materials at various angles. Heavy-duty cast iron saw bow – provides exceptional rigidity, vibration resistance, and cutting accuracy. Precision blade guidance with carbide inserts – ensures accurate blade tracking while extending blade service life. Automatic shut-off after cutting – improves operator safety and reduces unnecessary power consumption. Gravity-fed hydraulic feed system – delivers smooth, continuously adjustable feed pressure throughout the cutting cycle. Construction and Technology The MCB350HD is built around a robust welded steel frame combined with high-quality cast iron components. The 25° inclined saw bow improves cutting efficiency while extending blade life. A durable worm gearbox drive system ensures reliable long-term operation, while the integrated blade tension indicator (dial gauge tension meter) provides precise blade tension adjustment for consistent cutting performance. The machine is also equipped with a blade cleaning brush, a closed-loop coolant system with electric pump, and a material stop with measuring scale, making repetitive cutting to identical lengths quick and accurate. Precision and Performance The CORMAK MCB350HD metal band saw offers two blade speeds of 36 and 72 m/min, allowing the operator to match cutting parameters to different materials. Precision blade guides featuring bearings and carbide inserts ensure straight, accurate cuts while minimizing blade wear. The coolant system delivers emulsion directly to the blade guides, improving cutting conditions, reducing heat generation, and extending tool life. Applications The MCB350HD is designed for manufacturing plants, metal fabrication shops, engineering workshops, and maintenance facilities where reliability, repeatability, and versatility are essential. It is suitable for cutting: Steel pipes Hollow sections Structural profiles Flat bars Solid round and square bars Stainless steel and other ferrous and non-ferrous materials Standard Equipment Blade cleaning brush Coolant system with pump and reservoir Material stop with measuring scale Bi-metal band saw blade Blade and gearbox safety guards Optional Equipment Roller conveyor table for material feeding Additional band saw blades Laser cutting line positioning system Technical Specifications Knodpfx Ansi D Di Sodoa Specification Value Blade dimensions 2950 × 27 × 0.9 mm Blade speed 36 / 72 m/min Minimum cutting diameter Ø 5 mm Minimum workpiece length 100 mm Vise base height 940 mm Total installed power 2.2 kW Drive wheel diameter 330 mm Overall dimensions (L × W × H) 2000 × 1330 × 2020 mm Weight 540 kg

Condition: new, Year of construction: 2026, The CORMAK HBS320 Metal Band Saw is a high-performance, professional cutting solution designed for workshops and industrial facilities that require a reliable machine for precise cutting of pipes, profiles, and solid metal stock. Its robust construction, wide mitre cutting range, and compatibility with material feeding systems make it a versatile metal band saw for both production and fabrication applications. Key Features Mitre cutting from -45° to +60° – allows bevel cuts in both directions without repositioning the workpiece. Powerful 1.5 kW motor – delivers consistent performance and cutting stability, even when processing hard materials. Cast iron saw bow – minimizes vibration, ensuring high cutting accuracy and long service life. Precision blade guides – equipped with bearings and carbide inserts to improve blade stability and extend blade life. Enhanced operator safety – protective guards and safety micro-switches stop the machine when required. Integrated coolant system – electric coolant pump improves cutting efficiency and assists with chip removal. Construction and Technology The machine features a welded steel frame mounted on a rigid base with an integrated coolant reservoir. The cast iron saw bow provides exceptional rigidity for the cutting assembly. Cutting is performed by a gravity-fed system with hydraulic cylinder feed control, ensuring smooth and consistent blade descent. A quick-action vise with a movable jaw allows fast and secure workpiece clamping. The machine offers two blade speeds, 44 or 88 m/min, together with infinitely adjustable feed rate control. Precision and Performance Thanks to its rigid blade guidance system, the HBS320 maintains excellent cutting accuracy even during continuous operation. The independent coolant tank and pump reduce cutting temperatures, improve cutting quality, and extend blade life. An automatic motor shut-off at the end of the cutting cycle helps reduce unnecessary wear on drive components. Applications The CORMAK HBS320 metal band saw is suitable for cutting: Structural steel Stainless steel Tool steel Copper Aluminium Plastics It is an ideal solution for metal fabrication shops, tool rooms, steel structure manufacturers, maintenance workshops, and custom production facilities. Standard Equipment Quick-action machine vise Hydraulic feed cylinder with adjustable descent speed Kodpji D Dgwefx Andona Coolant pump with coolant tray and chip collection system Two-speed blade drive Safety micro-switch protection system Optional Equipment Roller table extension Technical Specifications Specification Value Maximum round cutting capacity (90°) Ø 260 mm Maximum rectangular cutting capacity (90°) 320 × 160 mm Power supply 3-phase, 400 V Motor power 1.5 kW Feed control Hydraulic cylinder Blade size 2740 × 27 × 0.9 mm Blade speed 44 / 88 m/min Vise height 920 mm Overall dimensions 1400 × 880 × 1550 mm Weight 280 kg

Condition: new, Year of construction: 2026, Professional, very powerful and efficient band saw for metal with 45° swivel arm. The perfect solution for ironwork, production and craft workshops. Unparalleled for many years, the design and solid construction make it a perfect solution. Machine description Professional, very powerful and efficient metal band saw with 45° swivel arm, CORMAK BS 712 SW is based on refined solutions making it unrivaled in its class. Arm made of shaped spheroidal cast iron ensures rigidity during operation and absorbs all vibrations. Control panel is located on the arm of the cutter. It features high efficiency and simple handling. Provides cutting in vertical plane and in the plane perpendicular to the axis of the cut material, or at any angle in 45° – 90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between hydraulic cylinder chambers. Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Technical data Motor power 1.1 kW Band speeds 22/33/45/65 m/min Power supply 230V Band dimensions 2360×20×0.9 mm Cutting range 45°L – 45°R Weight 145 kg Dimensions 1280x575x1140 mm Angle Knedpfxsmtwkte Andja 0°.....Ø 205.....215×205.....205×205 45° L.....Ø 150.....100×200.....130×130 45° R.....Ø 140.....140×90.....90×90 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, CORMAK BS370H Semi-Automatic Metal Band Saw The CORMAK BS370H is a robust semi-automatic band saw designed for precise cutting of tubes, profiles, and solid materials. The latest version is equipped with an upper clamping system for bundle cutting and variable blade speed control via an inverter, adjustable from 20 to 90 m/min. These enhancements increase the machine’s versatility and make it easier to adapt cutting parameters to different types of materials. The upper clamp stabilizes stacked workpieces and minimizes movement during cutting. This allows for more efficient cutting of bundles of profiles, tubes, and other repetitive components. Key Advantages Upper material clamp – stable and efficient bundle cutting. Variable blade speed (20–90 m/min) – speed adjustment via frequency inverter. Semi-automatic operation – hydraulic material clamping, saw head lowering, and automatic return. Mitre cutting from -45° to +60° – wide range of cutting applications. Hydraulically operated vise – fast and repeatable workpiece clamping. Infinitely adjustable downfeed rate – greater control over the cutting process. Blade guides with carbide inserts and bearings – precise blade tracking and improved cutting accuracy. Closed-loop coolant system – cools the cutting zone and dissipates heat effectively. Blade tension indicator – convenient monitoring of correct blade tension. Automatic shut-off in the event of blade breakage – enhanced machine protection and safety. Efficient Bundle Cutting The integrated upper clamp allows multiple workpieces to be securely held in place when stacked on top of each other. This is particularly beneficial for serial cutting of profiles, tubes, and other materials with repetitive dimensions. The material is secured both by the hydraulic vise and the upper clamp, reducing movement and lifting of individual pieces within the bundle as the blade passes through the material. Variable Blade Speed Control The blade speed can be continuously adjusted between 20 and 90 m/min. The inverter enables precise adaptation of cutting parameters according to the material type, cross-section, and specific cutting requirements. Semi-Automatic Operating Cycle Once the material is positioned and the cutting cycle is started, the machine automatically performs the following operations: The hydraulic vise clamps the workpiece. The saw head lowers at the preset feed rate. The blade performs the cut. A limit switch detects completion of the cutting cycle. The saw head is hydraulically raised back to its starting position. The swiveling saw head enables cutting angles ranging from -45° to +60°. The material remains stationary while the operator adjusts the required cutting angle by rotating the saw head. Cutting Capacity at 90° Material Type Capacity Round Ø270 mm Square 220 × 220 mm Rectangular 370 × 220 mm Technical Specifications Parameter Value Model CORMAK BS370H Operation Mode Semi-automatic Mitre Cutting Range -45° to +60° Blade Speed Variable, 20–90 m/min Blade Speed Control Frequency inverter Kodpfx Anoycqhcsdjna Upper Material Clamp Yes – for bundle cutting Blade Size 3160 × 27 × 0.9 mm Blade Tensioning Manual mechanical tensioning Saw Head Feed Control Infinitely variable hydraulic cylinder Vise Operation Hydraulic Vise Base Height 890 mm Power Supply 400 V / 3 Phase Total Power 1.5 kW Coolant Pump Power 46 W Machine Dimensions (with base) 1850 × 950 × 1500 mm Weight 491 kg

Condition: new, Year of construction: 2026, Metal Cutting Band Saw CORMAK BS530H – Professional Tool for Cutting Pipes and Profiles The CORMAK BS530H metal cutting band saw is a high-performance semi-automatic band saw designed for precise cutting of steel components, pipes, and profiles at various angles. Its robust cast iron construction, reinforced blade guiding system, and advanced hydraulic technology make it an ideal solution for serial production and demanding industrial environments. The integrated control panel allows a single operator to manage all machine functions, significantly reducing operating time and improving work ergonomics. Main advantages of the machine Semi-automatic operation – hydraulic lifting and lowering of the saw arm and vice control via the control panel. Worm gear transmission with bronze components – ensures smooth, precise operation without vibrations. Stepless cutting speed adjustment from 20–70 m/min – allows adaptation to various materials and cutting conditions. Carbide blade guides with roller bearings – provide durability and highly accurate blade tracking. Quick-clamping vice – manually or hydraulically operated, with left/right positioning capability. Angular cutting from -45° to +60° – with precise angle reading on the scale. Durable cast iron body – guarantees cutting stability and long machine service life. Hydraulic arm lowering adjustment – allows precise control and setting of the return height. Construction and technology The BS530H model features a reinforced drive system and industrial hydraulic components, ensuring reliable operation even under intensive working conditions. The heavy-duty cast iron body reduces vibrations and provides smooth, consistent performance. The ergonomic control console allows all operations to be managed from a single location. The coolant system integrated into the machine base effectively removes heat and contaminants, protecting the blade from overheating and premature wear. Precision and work efficiency Thanks to stepless speed adjustment, manual or semi-automatic operating modes, and the use of a dial tension gauge for monitoring blade tension, the BS530H metal cutting band saw ensures repeatable results and high cutting quality even during long production runs. Work efficiency is further improved by the front material support roller and the arm locking system, which increases operator safety after completion of the cutting cycle. Applications The machine is designed for: industrial production plants, metalworking workshops, companies performing serial cutting of profiles, pipes, and solid steel sections. It is ideal for serial production, steel fabrication, and preparing components for welding or further processing. Standard equipment Control console with semi-automatic functions Hydraulic vice Powered blade cleaning brush Coolant system with pump Front material support roller Dial blade tension gauge CE declaration and technical documentation (DTR) Optional equipment Ksdpfxsw U Svlo Andjna Additional material guide rollers Semi-Automatic Metal Cutting Band Saw CORMAK BS530H Technical data Parameter Value Working height 965 mm Cutting speed 30–80 m/min Saw blade dimensions 3770 × 34 × 1.1 mm Coolant system power 0.1 kW Total motor power 3.0 kW Power supply 400 V Machine dimensions (W × D × H) 2200 × 1400 × 2050 mm Weight 730 kg

Condition: new, Year of construction: 2026, Metal Cutting Band Saw CORMAK BS530 The CORMAK BS530 metal cutting band saw is an advanced industrial machine designed for cutting steel components, pipes, and closed profiles. It is ideal for both workshop applications and serial production, offering a wide range of cutting angles from -45° to +60°. The stable cast iron construction and professional equipment ensure high precision and repeatability of the cutting process. Main advantages of the machine Large range of miter cutting angles – from -45° to +60° with precise angle reading on the scale. Dial tension gauge system – enables accurate control of blade tension, extending saw blade service life. Two-speed blade adjustment – 35/70 m/min, allowing the cutting speed to be adapted to the processed material. Reinforced hydraulic cylinder – provides smooth arm lowering adjustment via a potentiometer. Ergonomic control panel – equipped with start/stop buttons, coolant control, fast/slow mode selection, and emergency stop switch. Construction and technology The main frame of the band saw is made of high-quality torsion-resistant cast iron, ensuring stable operation even when cutting heavy components. The drive wheels are hardened and ground, while the blade guides equipped with bearings and carbide plates provide precise blade tracking. Knodpfxjv R Tgto Andea The drive system is based on a worm gear transmission, ensuring reliability and efficient power transfer. The machine is equipped with a powerful 2.8 kW motor and an integrated coolant system with a pump and coolant collection tray. Precision and work efficiency Thanks to its robust construction and carefully designed blade guiding system, the CORMAK BS530 metal cutting band saw provides quiet, vibration-free operation and high cutting quality. The automatic shut-off function after completion of the cutting cycle and the arm locking system further improve operator safety and ease of use. Applications The BS530 model is designed for professional applications in the metalworking industry, including: workshops, production plants, fabrication shops, processing lines. It is an excellent solution as a band saw for pipes and profiles, as well as for cutting solid materials and tool steels. Standard equipment 34 mm cutting blade Blade tension gauge system Quick-clamping vice with two-way positioning Coolant system with pump and collection tray Control panel with emergency stop switch Optional equipment Roller conveyor table for material feeding Technical data Parameter Value Working height 870 mm Cutting speeds 35 / 70 m/min Band saw blade dimensions 3770 × 34 × 1.1 mm Blade width 34 mm Coolant pump power 0.1 kW Total motor power 2.8 kW Power supply 400 V Machine dimensions 2200 × 1400 × 1500 mm Weight 640 kg