Used Kba 104 5P for sale (1,457)

Condition: ready for operation (used), Siemens 1FT5076-0AF01-2-Z Z=G45 SN: E0Q10912104005 Permanent Magnet Motor, used, in good condition, 100% functional, scope of delivery as per photos. Csdpfxjx Dumqj Af Hsgu

Year of construction: 1997, condition: excellent (used), Ref: 11107 . 1997 Bobst SP 104 E Excellent condition, ex Swiss print house, only 32,500 hours worked! Now fully cleaned & checked by specialist engineer. Die cutting machine with stripping and blanking. Cgjdpfsy Uyb Rsx Af Hsu Equipped with: Automatic feeder Double-sheet sensor Central line for quick job change Bobst C.U.B. electronic control system. E. (Bobst Electronic Control Unit) Micrometric adjustment Quick Lock cutting chase 1-4 mm cutting plate Micrometric Adjusting Upper pull-out stripping frames Central pull-out stripping frame Lower pull-out stripping frames Upper and lower stripping hardware Non-stop device Automatic waste removal apron Synchronization device timing the sheet arrival against the front lays Lateral adjustment for suction device Pull guide OOS Chase changer Auto delivery with non stop Specification: Speed: 8000 sheets/h Pressure: 2,5 MN (250 tones) Sheet size: 104 x 74 cm max.40 x 35 cm min., sheet thickness: 0,4 cm, Punching with gripper margin: 104 x 71 cm Punching without gripper margin: 104 x 74 margin adjustable: 9-17 mm Embossing format: 104 x 71 cm Punching line height: 23,8 mm, Height of embossing plate: 6.35 / 7 mm Material: Paper from 80/90 g/m², Solid board 250 to 2000 g/m² Corrugated board E and B up to 4 mm.

Condition: used, cone distance min./max. 0-108 mm Pitch angle min/max 5°/84° Cgsdpjyh Rmmefx Af Heu Control GE Fanuc Series 0-GC Pitch diameter (1:1 ratio) 152 mm pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Face width gear wheel max. 35 mm Knife spindle - Speed range 41-121 U/min working spindle speed range 0-33.33 U/min weight 9025 kg dimensions of the machine ca. 2707 x 2720 x 2200 mmxmmxmm Equipment/accessories: - 18-piece cutter set - Chip conveyor - Technical documentation

Condition: used, Year of construction: 2002, Used machine Year of construction 2002 table size 580 x 280 mm Drilling table height 800 mm Drilling depth 150 mm Drilling length 225 mm with Wescott drill chuck 0-20 mm height adjustment 120 mm Swivel range drilling unit 2 x 45 ° with 2 eccentric clamps with one-hand operation with dowel drilling device with dial gauge in handwheel with digital display with 2 speeds 1400 and 2800 rpm with drive unit LxWxH 850x1000x1050 mm Cgsdpfxew Nacco Af Heu Weight approx. 240 kg Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101780, total length: 4,300 mm, total width: 720 mm, total height: 1,390 mm, type of input current: three-phase, input voltage: 400 V, feed rate X-axis: 6 m/min, power: 8.4 kW (11.42 HP), We offer this used Rehnen KBA edge sanding machine, year of construction 2008. Manufacturer: Rehnen Model: KBA Year of Construction: 2008 Condition: used Category ID: 826 Type ID: 94 Type: edge sanding machine Aggregates total: 5 Moulding aggregates: 2 Sanding aggregates: 3 Workpiece width min mm: 60 Workpiece thickness max mm: 90 Csdjyvfwrjpfx Af Hsgu Feedrate max m/min: 6 Aggregates oscillating: Yes Sanding belt: Yes Profile sanding pad: Yes Milling aggregate vertically scanning: Yes Stepless rotational speed control: Yes Clamping system: Upper pressure rolls Jump-in control: pneumatic CE marking: Yes Total connection kW 6,50 Required space LxWxH mm 4300x720x1390 Availability short-term, ex location customer! If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2008, Trepko 104 KSP – Filling & Closing Machine (Year 2008) Cedpfxex A Er Io Af Hogu Well-maintained Trepko 104 KSP inline filling and closing machine, suitable for butter, margarine, spreads, dairy products, and similar applications. Specifications: - Model: Trepko 104 KSP - Serial No.: 3702 - Year: 2008 - Capacity: Up to approx. 200 cups/min (4 lanes, 50 cycles/min) - Filling System: Servo-driven piston filler for high dosing accuracy - Closing System: Foil heat sealing + option for snap-on plastic lids - Construction: Stainless steel, hygienic design Documentation: - EC Declaration of Conformity - Pneumatic schematics - Manuals included Key Features: - Fully automatic inline operation - Quick format and product changeover - Reliable and robust machine design - Suitable for dairy and food production - Machine has been out of operation for the last two years - Good technical condition, available for immediate sale. Location: Denmark Filling volume: 200, 250, 400, & 500 grams.

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. * Cgodpfou Nigkox Af Hou

Condition: excellent (used), Year of construction: 2018, CATALOGUE NUMBER 8009 TECHNICAL DATA - max. material width 600mm - max. cutting height 170mm - diameter of upper spindle 70mm - diameter of lower spindle 70mm - diameter of circular saw: option 1: 250mm/350mm, option 2: 300mm/300mm - length of upper spindle working part 550mm - length of lower spindle working part 550mm - spindles equipped with a brake - spindle wedges 2 pcs - power of upper drive spindle motor 18.5kW - power of lower drive spindle motor 22kW - power of feed drive motor 2.2kW - stepless feed speed adjustment via a frequency inverter - average diameter of dust extraction nozzle 2x200mm from above: - pawls 2 rows - toothed draw roller - saw arbor - toothed draw roller - sliding roller, metal from below: - draw chains - saw arbor - draw chains - sliding roller, metal - overall dimensions L/W/H 3170/1450/1730mm - weight approximately 2500kg ADVANTAGES – Polish production Cgsdpjy Uvlxjfx Af Heu – multi-blade, two-spindle saw – year of production 2018 – documentation: DTR + CE – used multi-blade saw, very good condition Net price: 78900 PLN Net price: 18786 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: used, Manufacturer: Dreher Condition: Used Stock number: 3175 Additional features: The line consists of: Dreher brewing system with 2 vessels Type: KBA500 Year of construction: 2006 Boiler: 550 litres Heating: 42 kW Control system: KBA basic 3x Dreher fermentation tanks Type: GW500 Year of construction: 2006 Capacity: 520 litres With Dreher ZKV120 cooling system 3x Dreher / Brovarni dosing tanks Type: 500 L CCT Year of construction: 2017 Capacity: 500 litres 1x Dreher bright tank Cgsdpfx Afeyzyy He Hsu Capacity: 1000 litres 6x Dreher combination tanks Type: KT500 Year of construction: 2006 Capacity: 500 litres 5x FIB beer tanks Type: 70200503 Year of construction: 2022 Capacity: 540 litres Auxiliary equipment, including: - Gail 103 grain mill - Enotecnica Pillan srl F30 20x20 filter - Serrco SW-150 cooling water tank - Bottle washing station - Bottle filling machine - Corking machine - 45x 20 litre kegs - Workbench - Double sink

Condition: used, Year of construction: 2001, stations 10 / 22 Cjdpstqqlqsfx Af Hjgu tool taper SK 40 control SIEMENS SIMATIC OP 3 total power requirement ca. 112 kW = transfer machine Shift drum with 10 workpiece stations, 22 machining units (drilling 7 units, drilling and thread cutting 8 units; drilling and sinking 5 units; drilling, sinking and thread- cutting 2 unit), spindle taper SK 40 each, engine power of the individual units between 4.0 and 4.5 kW, SIEMENS control SIMATIC OP 3, assembly robot ABB Accessories.: chucks (without jaws), chip conveyor, coolant device

Condition: used, Year of construction: 1997, stations 10 / 22 tool taper SK 40 control SIEMENS SIMATIC OP 3 total power requirement ca. 130 kW = transfer machine Shift drum with 10 workpiece stations, Cgsdpfx Afjtqqlrj Hju 22 machining units (drilling 10 units, drilling and thread cutting 5 units; drilling and sinking 3 units; drilling, sinking and thread- cutting 1 unit, thread cutting 3 units), spindle taper SK 40 each, engine power of the individual units between 4.5 and 5.5 kW, SIEMENS control SIMATIC OP 3, assembly robot ABB Accessories.: chucks (without jaws), chip conveyor, coolant device

Condition: excellent (used), Beveling Machine Stock Number: 9283 Manufacturer: Trumpf Year of Manufacture: Type: 104-0 Machine Number: Max. bevel length (infinitely adjustable): Mild steel at 400 N/mm²: 10 mm Mild steel at 600 N/mm²: 8 mm Mild steel at 800 N/mm²: 5 mm Working Speed: 2 m/min Rated Power: 2 kW Stroke Rate at Rated Load: 370 / min Material Thicknesses Min/Max: 3 / 25 mm Cgjdowfzzmspfx Af Hju Weight: 16.5 kg

Condition: used, sheet width 1050 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm distance between columns 1200 mm blade length 1150 mm no. of strokes 46 - 69 Hub/min cutting angle 1.30 ° Control konv. oil volume 100 ltr. total power requirement 5.68 kW weight 1100 kg From a maintenance workshop In good condition (!!) Features: - Robust electro-hydraulic sheet metal shear Cgodoy Raimopfx Af Hsu - Electric motor-driven backgauge * Backlash-free ball screw for backgauge * Travel speed 100 mm/sec - Electric cutting length limiter * Cutting length limiter to increase the stroke rate per minute - Manual cutting gap adjustment (lateral adjustment) - Front support table with recessed grips - Front finger/interference guard - 1x side stop with T-slot and millimeter scale - 2x front support arms - 1x freely movable foot switch - Operating instructions (PDF)

Condition: ready for operation (used), Heidenhain ERN 180 5000 01-03 encoder. 377 104-96, used, normal signs of wear, 100% functional, delivery as shown in the photos. Cgedpsi Eah Ujfx Af Hju

Condition: ready for operation (used), Bosch SD-B3.095.030-10.000 servo motor, SN:104-914810, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Cjdpfx Aoi D E Tasf Hjgu

Condition: ready for operation (used), Bosch UVF 100M / 4B-12S / 643 / 3386668-1 servo motor SN: 104/914339, terminal box cover is missing and the connection is slightly damaged, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Cgedpsi D Hg Rsfx Af Hou

Condition: used, 2-stage electric motor with gearbox DEMAG Type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 125 B Motor No.: 3926599 Speed: 915 rpm Motor power: 4.7 kW Power supply: 400 Volt, 50 Hz Cedpfxsy N D E Aj Af Hsgu - Clutch disconnects via armature thrust movement during direct drive 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 80 A Motor No.: 3926599 Speed: 1360 rpm Motor power: 0.83 kW Power supply: 400 Volt, 50 Hz - Brake disengages via armature thrust movement during operation - When stationary, the brake operates through the reduction gearbox on the motor - Output speed via gearbox: 174 rpm Reduction gearbox DEMAG Type FG 08B-B3-23-H1-F1 Gearbox No.: 13926599 Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor armature: Ø 32 mm Shaft stub length: 80 mm Centering diameter at motor: Ø 125 mm Bolt circle diameter at motor: Ø 150 mm / 4xM12 internal thread Dimensions (LxWxH): 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Condition: used, Year of construction: 1996, Colour: Grey Weight: 3.500 kg - Year: 1996 - Documentation available: No - CE certificate present: No - Serial number: 10.6654 - Input table length [mm]: 8800 - Output table length [mm]: 6650 - Voltage [V]: 400 - Fuse [A]: 25 - Power [kW]: 8.0 - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 6 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Cgjdpey Il Ucofx Af Hsu Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2013, Heat exchanger / SPIRAFLO. Type - XTSD 104/64-6-304/316-C Is made in 304 and 316 steel. Year of manufacutre - 2013. Empty weight - 2.000kg. Total dimensions - Length - 700cm. Width - cirka 235cm. Height - 200cm. Csdohtuu Uopfx Af Hegu

Condition: ready for operation (used), Year of construction: 2005, operating hours: 23,607 h, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, table load: 800 kg, overall weight: 9,500 kg, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis DMC 104 V linear was manufactured in 2005. It features an impressive X-axis travel of 1040 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine includes a robust clamping surface of 1250 mm x 600 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMC 104 V linear vertical machining centre we have for sale. Contact us for further details. • Spindle hours: 12,600 • Tool positions: 30 • Control: iTNC 530 • Clamping surface: 1250 mm x 600 mm • Transport weight: approx. 9.5 t • Control: iTNC 530 Cedpfx Afjyu Sc Sj Hjgu Additional equipment • 4th axis: Lehmann EA-420 Technical Specification Taper Size SK 40

Year of construction: 2008, condition: used, Year: 2008 Condition: Funkcional, dismontled in the warehouse Six-colour sheetfed offset press with coating tower including chambre coater (L) extended unloader (ALV) and carton equipment up to 1,2 mm Technical parameters: - Maximum sheet format: 740x1050 mm - Minimum printing format: 350x500 mm - Maximum speed: 15 000 sheets / hour - Usable materials: cca.60g/m^2 max 1,2mm - High of the stock: - loader 1300 mmm - unloader: 1200 mm - Double diameter impressions and transfer system Basic specification: Loader equipment: - Drive Tronic loader - Sheet splitting with 4 lifting and 6 transporting suction cups (2 of which are long jump suction cups) - Format presetting from the Ergo Tronic controle panel Loading equiment: - Pneumatic traction pads with automatic format adjustment via menu from the Ergo Tronic controle panel Print unit equipment: - Automated plate changing (SAPC) Color wheel equipment: - Color Tronic tinting with 35 zonal blades, each 30mm wide Interpreter equipment: - Powder device WEKO AP 130 Gallery at the machine: - Ergonomic gallery on the device and oparator side Cedpfoy H Hgdsx Af Hegu Machine equiped: - Equipment for printing cardboard up to 1,2 mm o Manual skid steed loader o Equipment for carton management in printing units o Monitoring the pasage of sheets o Roll down roller shutter for stop-free unloading - Extended unloader / delivery 2600 mm - Full automatic plate changing with pneulatic plate bending device - Machine elevation by 375 mm - ACR Controle(automatic Register) - Connection to the existing Logotronic basic systém (CIP 3) - Connection to the existing Densitronic S console - Color zone status and measured values for Densotronic - Baldwin blankets and impression cylinders washing devices - Combined cooling / temperature controle - Baldwin unit - Grafix dusting with iuonization and connection to the controle panel - Infrared and hot air dryers in delivery

Condition: excellent (used), mileage: 762,619 km, power: 315 kW (428.28 HP), first registration: 04/2003, fuel type: diesel, axle configuration: 10x4, wheelbase: 6,950 mm, fuel: diesel, color: red, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro3, total length: 9,680 mm, total width: 2,520 mm, Year of construction: 2003, Equipment: ABS, air conditioning, electric window regulation, power mirror, = Additional options and accessories = - Air suspension - Leaf spring - Power take-off (PTO) - PTO - Radio/Cassette player - Radio/CD player - Speed limiter - Sun visor = Remarks = XL9AM27XE03010978 = More information = Rear axle 1: Lift axle Number of cylinders: 6 Empty weight: 13.600 kg Carrying capacity: 36.400 kg GVW: 50.000 kg Tipper: Back Technical condition: very good Visual appearance: very good Registration number: BN-RB-49 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A Csdpfx Afeymqu Ds Hjgu

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, We offer this ready for use Elumatec DG 104 Double Miter Saw, year of construction 1995. Machine is fully working. 6m long, 3 axis Manufacturer: Elumatec Cedpfoy Hpfvex Af Hjgu Model: DG 104 Year of manufacture: 1995 Machine type: Double Miter Saw If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2005, Bobst SP 104 ER Die-cutter Diecutter with stripping and blanking station Technical specifications: Paper min. 90 g/m2 Cardboard max. 2000 g/m2 Corrugated board max. 4 mm Min. sheet size: lxw 350 x 400 mm Max. sheet size: lxw 740 x 1040 mm Max. dimensions of cutting die: Max. lxw 725 x 1040 mm Cutting force: 250 tons Running speed: max. 8.000 s/h. Centerline for job quick-change Adjustable centering at the stripping and at the delivery, Cgsdpewgz H Eofx Af Hsu Bobst-Electronic machine operationg system C.U.B.E. : (Control Unit Bobst Electronic) Non Stop Feeder, Steel plate, Double Sheet Sensor, Left hand pull lay, Right hand pull lay, Micrometic adjustment, Centerline, Double Action Stripper, Blanking Station, Quick lock stripping frame,

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, MABEG RS 104 REEL SHEETER - Year 2011 Evolution Cjdpfx Afsy Au Ibj Hsgu ROLAND film dampening unit with delta effect ROLAND Stream Feeder Wallscreen XL Touchscreen RCI: Remote Control Desk PressPilot Center InlineColorPilot & ColorPilot D+F Inlineinspector 2.0 EyeC - InlineInspector after last Printing Unit Airglide Delivery Extended Delivery APL (Fully-Automated Plate Changing ) 2xIR/TL Interdeck dryer between 2 coater LTTLV SelectDryer IR/TL/UV in Delivery for Coating, UV Colours and UV Coating Impression Account: 220 Mio.