Used Kennametal/Mta Powder Welding System for sale (41,401)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, working range: Iisdpfx Aoy Er Uqonwoc X-axis: 2.000 mm Y-axis: 1.200 mm Z-axis: 190 mm welding power: 20 kA welding force: 2 x 5 kN

Year of construction: 2019, condition: like new (used), functionality: fully functional, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA MH6.(Payload: 6kg, H-Reach:1422mm, Robot Mass: 130kg, 2009.03) 1 x YASKAWA DX100 controller.( 2009.03 ) 1 x IPG YLS-1000 Ytterbium 1kW Laser.(2011.05) 1 x IPG P30 laser welding head with coaxial nozzle and cam.(2018.05) 1 x Cooling water circulation system RIEDEL for laser.(2011) 1 x Cooling water circulation system Chilly-35-S for optics.(2010). 1 x siegmund table 1200x800.(2019) 1 x IPG Welding Head Alarm Module Box WHAM.(2018.05) 1 x PC for Laser with LaserNet software. Iisdjh Ad E Hepfx Anwoc Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Year of construction: 2019, condition: like new (used), Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA HP20D.(Payload: 20kg, H-Reach: 1717mm, Robot Mass: 280kg, 2009.01) 1 x YASKAWA DX100 controller.( 2009.02 ) 1 x LASERLINE LDM 1200-60 Diode 1320W Laser.(2015.10) 1 x LASERLINE laser welding head OTS-5 with Crossjet and cam.(2017.12) 1 x Cooling water circulation 2 way system HYFRA Sigma7 for laser and optics.(2018) 1 x siegmund table 1200x800.(2019) Iiedpfxeh Aiy Sj Anwjc Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Year of construction: 2025, condition: new, Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%. Due to inverter technology, energy efficiency is higher than the conventional machines. Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases. 4 Wheel Drive system, offers very powerful feedability for longer torches and offers less deformation on soft wires such as aluminum and flux cored wires. Welding voltage, wire feed speed (welding current) is adjusted from the panel in front of the wire feeder. Optimum welding parameters can be obtained from the printed table inside of the wire feed cabinet. Manual wire feeding & gas valve buttons, Trigger Mode (2/4), Spot mode are available on the wire feeder. Iedpfsyx Hpisx Anwjic Soft Start, Pre-gas, Post-gas, Crater Filling, Burn-Back, Flow Sensor settings are adjusted from the digital panel of the wire feeding system. ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used. 24V AC outlet for CO2 gas heater. Built in gas cylinder platform with large wheels to ease mobility in workshops. The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request (M-MW models). Protected against voltage fluctuations. Designed also for outdoor use, protection class is IP 23. Water cooling unit for water cooled torches provides powerful cooling even at very hot climates. (Water-cooled (W) models) Standard accessories come with the machine.

Year of construction: 2015, condition: ready for operation (used), A complete longitudinal beam welding system (vehicle carrier) Merkle with a tack welding station, a cooling station and a longitudinal beam welding machine is available. Beam height range: 70mm-500mm, max. beam length: 13700mm, flange width: 120mm/150mm, flange thickness range: 5mm-20mm, web plate thickness range: 3mm-10mm, clear width: 85mm-500mm, web offset at 15° transition: 50mm. 1) Welding system, track length: 20m, rotating device: 0°-45°, total clamping and tack welding range: 14300mm, guide spacing: 500mm, roller conveyor height: 800mm, welding process: MIG/MAG-Pulse-Arc, travel speed: 6m/min, vertical stroke: 800mm, horizontal stroke: 2x270mm, power sources: 2x HighPulse 550 RS, torch: MSB 400W. 2) Tack welding device, tack welding position: 45°, max. changeover time: 10min. 3) Transport and cooling line, tack welding area roller conveyor length: 15000mm, buffer and cooling area roller conveyor length: 15180mm, welding area roller conveyor length: 18055mm, roller diameter tack/buffer/welding: 80mm/80mm/200mm, roller width: 245mm/245mm/2200mm. Documentation vorhanden. An on-site inspection is possible. Iiodpfx Aoyx H Hnjnwjc

Condition: new, Year of construction: 2025, ✅ Get to know our fully automated powder coating systems for maximum production capacity! Professional powder coating is essential for making metal surfaces durable, corrosion-resistant, and visually appealing. If you want to coat large quantities in your company and achieve maximum efficiency, our fully automated powder coating systems are exactly the right choice. 🔧 Proton Maschinenbau GmbH offers you intelligent, fully integrated system solutions for economical and consistently high-quality production. _____ 🔍 Impressive technology – Our system technology at a glance: ✅ Spray pretreatment line in tunnel design ✅ Drying ovens (available in U-, M-, or L-shape) ✅ Fully automatic powder coating booth – PVC floor for easy cleaning and quick color changes – Housing options made of stainless steel, powder-coated sheet steel, or PVC – ATEX-certified lighting units – Pneumatic floor cleaning system ✅ Automatic painting robots (1-, 2-, or 3-axis models available) ✅ Automatic powder coating guns ✅ Central powder coating station ✅ Monocyclone jet pulse filter unit (adapted to booth size) ✅ Curing ovens (U-, M-, or L-shape available) ✅ Conveyor systems (single-line or Power & Free system) ✅ Central control panel with touchscreen (from 7" display size) _____ 🎨 Housing colors to suit your taste – at no extra charge! Our machines are available in two modern color options: Yellow-white or anthracite-white – tailored to your corporate design or aesthetic preferences. Our customers can choose between these two combinations at no extra cost. _____ 🎯 Why a powder coating system from Proton? Ijdpfxswbh Npe Anweic ✔️ Modular and scalable as needed ✔️ Layout planning tailored to your location ✔️ Maximum automation through numerous options ✔️ Compliance with European standards (CE, ATEX) ✔️ Energy-efficient and low-maintenance _____ 💡 Configure your system now! Use our powder coating configurator on our website to put together your customized system. Once the configuration is complete, our engineering team will create a customized concept for your requirements. _____ Proton Maschinenbau GmbH – Powerful technology. High performance. Worldwide trust.

Condition: new, 🚀 Modular powder coating systems with bar transport system Our modern painting systems with bar transfer systems offer maximum flexibility with minimal space and energy consumption. All process steps – from pretreatment to oven drying – can be carried out in a single, continuous line. 💡 Ideal for the following applications: Powder coating and wet painting Sandblasting Chemical pretreatment Baking and cooling Isdpfody Ezdox Anwoic 🔁 Intelligent transfer system The transport system moves the workpieces safely and efficiently through all stations of the system: Manually or motor-operated Optionally with a lifting device for heavy workpieces Parking stations for buffering and intermediate storage Compatible with automatic paint booths and walk-in booths The movement is fully automated with a continuously variable drive that enables precise control of cycle times. 🏗️ Structure & Components: Monorail conveyors for longitudinal movement Cross-guide units for direction changes Mobile carriages with product holders Load-bearing steel structure for continuous loads Control via control panel with speed control ⚙️ Efficiency through sophisticated design The system allows contactless handling – the workpiece is suspended at the loading station and remains in the same position until removed. This ensures consistently high quality and minimizes handling times. 🔧 Lifting device for loading and unloading The integrated bar lifting device enables ergonomic and safe working with heavy parts. Operators can precisely position the lifting bar at the push of a button (raising/lowering) – ideal for large components. ✅ Your benefits at a glance: Fully automated material flow For workpieces of any size and weight Reduced space requirements Minimal maintenance, maximum service life High energy efficiency Adaptable to your individual requirements This solution is perfect for modern coating processes where flexibility, ergonomics, and efficiency are paramount. Our experienced engineering teams will adapt the system precisely to your production requirements. 👉 Contact us for a customized solution or visit our website for more information.

Condition: ready for operation (used), Merkle W 420 AC/DC TIG Insquare welding machine / welding system Isdpfx Aeu Hg Aqonwoic Technical data can be found in image no. 2 You are welcome to arrange a viewing appointment. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid is available. Sale subject to prior sale. Visit our shop and check out our other offers as well. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Deviations from technical data and errors in the item description may occur and are subject to change.

Condition: good (used), machine/vehicle number: 75804, Welding current range AC Tig: 7 - 390 A Welding current range direct current Tig: 6 - 230 A Electr. connection: 380 V, 45 A space requirement: 1100 x 600 x 1370 mm Iijdpob Nv Irsfx Anwec

Condition: good (used), Year of construction: 2001, Offer 24367 Orbital welding system + pipe cutting machine Technical data: Ijdjvhchhspfx Anweic - Orbital welding unit AXXAIR SALS 150 ( AIR LIQUIDE Prestotig 180 ) - Cooling unit ACW 015 ( SAF Prestocool ) - Circular seam welding unit AXXAIR CC 220 with motorized rotation - Raw cutting machine AXXAIR CC 80 - Transport trolley - Table height 830 mm - 220 V connection - Space requirement approx. W 1400 x H 1450 x D 1000 mm - Weight approx. 150 kg

Year of construction: 2021, condition: ready for operation (used), A laser cross-welding system is offered. Fiber laser 1500W water-cooled, cooling unit integrated, pallet truck guide, shielding gas supply, weld seam pressing device, remote access RMACC01 SECOMEA, strip width max.: 110mm, strip material: steel: 0.25mm-3.0mm, C steel: 0.25mm-2.5mm, aluminum: 0.25mm-2.5mm, copper: 0.20mm-1.2mm, dimensions W/H/L: 650mm/2054mm/1050mm, weight: approx. 650kg. Inspection possible by appointment. Iiodeyugl Uopfx Anwsc

Condition: excellent (used), Year of construction: 2019, The system consists of two identical laser welding units. The system was previously used to manufacture Li-ion batteries (E-Smart). In this process, cell connectors for series connection in battery modules were welded. The cycle time for battery modules in this production was 3-4 minutes. Basic data: Year of manufacture: 2019 Weight: 6021 kg Nominal current: 20 A Connected load: 12 kVA Disc laser: Trumpf 12-12-30-A32/11 with focusing optics (PFO) Laser measurement and calibration: PRIMES FocusParameterMonitor (FPM) Iijdpfxjv Iq Tlj Anwsc Control cabinet cooling: RITTAL SK 3185830 1x laser source supplying both systems: Trumpf TruDisk 5001, Laser power: 5 kW Wavelength: 1030 nm Beam quality: < 100 µm

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-1500-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1500 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz Ijdpfsthigrjx Anwjic - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm Iiedethit Espfx Anwjc - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Ijdpfx Ansrumymswjic A part of our machines is available IMMEDIATELTY. Manual laser welder 3000 W There are two features that characterize Otinus laser welders - perfectly repeatable welds and ease of use. The kit includes: laser welder with a built-in cooling system welding gun features with a focal length adjustment and a set of accessories MAX Photonics fiber laser source automatic wire feeder lead and hose kit nozzle and lens starter kit Specifications laser power output 1500 W laser wavelength 1064 nm welding speed: up to 120 mm/s feed voltage 230 V 50 Hz dimensions (including the laser head rack) 630x1300x1500 mm Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Fiber optics connecting the welding gun with the laser source allows the operator to work freely at multiple workstations. Small heat affected zone prevents from severe distortions. The weld is applied in a short time achieving proper and strong joint between materials. Intended use The laser welder is designed for professional use in workshops and plants where high welding quality and aesthetics are required. Laser source output power: 1000 W Carbon steel: up to 3 mm Stainless steel: up to 3 mm Aluminum: 2 mm Brass: 0,8 – 1 mm Laser source output power: 1500 W Carbon steel: up to 4 mm Stainless steel: up to 4 mm Aluminum: 3 mm Brass: 1 mm Laser source output power: 2000 W Carbon steel: up to 5 mm Stainless steel: up to 5 mm Aluminum: 4 mm Brass: 2 mm Laser source output power: 3000 W Carbon steel: up to 8 mm Stainless steel: up to 8 mm Aluminum: 7 mm Principle of operation The laser welder melts down the welding wire together with material edges by means of a laser beam. After switching on and setting up the unit, the welding gun is positioned at the beginning of the future weld line. Then, by pressing the trigger of the welding gun, the beam is generated at the fiber laser source located inside the housing. The beam propagates along the optical fiber to the laser head. The beam is focused and emitted toward the welding wire, which is fed by a wire feeder and toward a location where the gun has been placed. After the trigger is pulled, the head should be pulled along the weld line according to the wire feed rate. The cooling system maintains a constant temperature for the gun and the laser source by means of a water recirculation system. Radiation level and cooling are managed using a controller that adjusts the parameter values according to the user’s parameter settings.

Condition: new, SAPI Powder Coating The Perfect Coating for Lasting Protection. Powder coating is a highly effective and widely used method for applying a protective and decorative surface to various types of substrates. It is a dry finishing process where a fine powder made of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared first. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for ensuring that the powder bonds effectively to the substrate, creating a strong and long-lasting coating. Components of a Powder Coating System A typical powder coating system consists of several components and devices required for applying and curing the powder coating. Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures an even distribution of the powder. 🎨 Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. 💨 Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It typically includes devices like powder pumps, feed hoses, and powder sieves to transport the powder from storage to the spray gun. 🔄 Pre-treatment Equipment Pre-treatment systems are used to prepare the substrate before applying the powder coating. This can include processes like cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. 🧼 Curing Oven A curing oven is a crucial component of a powder coating system. It is used to heat the coated substrate to the correct temperature so the powder coating melts, flows, and hardens into a permanent surface. The oven usually consists of a conveyor system or racks to transport the coated parts through the oven chamber. 🔥 Exhaust System An exhaust system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe work environment for the personnel and prevents the accumulation of powder particles in the air. 🌬️ Iedpfx Aeun Sd Uenwsic Looking for a Powder Coating Solution? Are you searching for a custom powder coating solution? We specialize in providing tailored powder coating solutions to meet your individual needs. Whether you have specific color requirements, complex designs, or challenging substrates, our experienced team is ready to deliver exceptional results. 💡 Contact us today to discuss your requirements, and let us develop a custom powder coating solution for you. 📞 Get in touch with us today!

Condition: reconditioned (used), Year of construction: 2011, compl., overhauled welding robot system incl. robot RT 330 on rotary gallow, control K 5, gasnozzlesensing, seam tracking ( option), mech. torch cleaning, pressure amplifier, welding equipment Fronius TPS 4000, wire feeder, torch, torch hose package 1 light beam start box, 1 2 stations turning table with H frame and 2 turning tables RP 150 A ( load capacity 300 kg), distance of surface plates 2700 mm, swing radius 600 mm Iodpscrtliefx Anwjic warranty: 6 month for material

Condition: good (used), MERKLE Insquare W 300 AC/DC lasapparaat met originele kabelset Primair: Iiodpfel Sm Hbjx Anwec Spanning: 3 x 400 V Frequentie: 50 (60) Hz Cos phi: 0,95 TIG DC stroombereik: Open circuit spanning: 80 V Werkspanning: 10-22,8 V Lasstroom: 5-320 A HSB 60% inschakelduur (10 min.) 320 A HSB 80% inschakelduur (10 min.) 300 A DB 100% inschakelduur: 260 A (40 °C) Primair continu vermogen: 9,5 kVA Primaire continue stroom: 13,7 A Primaire maximale stroom: 19 A TIG AC stroombereik: Open circuit spanning: 80 V Werkspanning: 10-22,8 V Lasstroom: 5-320 A HSB 60% inschakelduur (10 min.) 320 A HSB 80% inschakelduur (10 min.) 300 A DB 100% inschakelduur: 260 A (40 °C) Primair continu vermogen: 9,5 kVA Primaire continue stroom: 13,7 A Primaire piekstroom: 19 A MMA-lassen: Stick-elektroden: 1,5-6 mm Open spanning: 80 V Werkspanning: 20-32,8 V Lasstroom: 5-320 A HSB 60% inschakelduur (10 min.) 320 A HSB 80% inschakelduur (10 min.) 300 A DB 100% inschakelduur: 260 A (40 °C) Primair continu vermogen: 13,1 kVA Primaire continue stroom: 19 A Primaire piekstroom: 22 A Lasproces: 10-standenschakelaar: TIG DC Min, TIG DC Plus, TIG DC Min met startpuls, TIG AC Geluidsarm, TIG AC Blokgolf TIG AC "Gebalanceerde TIG", Elektrode Min Elektrode Plus Elektrode "Sinusgolf" Elektrode Blokgolf Keuzeschakelaar 1: 10-standenschakelaar: Stroom 1, Tijd 1, Stijg- en daaltijd, Startstroom, Eindstroom, Ontstekingspuls, Punttijd, Gasvoor- en nastroomtijd Keuzeschakelaar 2: 9-standenschakelaar: Stroom 2, Tijd 2 (voor pulsmodus), AC Balans, AC Frequentie, Hotstarttijd en -stroom, Stroominstelling, Elektrode d, Display U Instellingen: 2 draaiknoppen voor keuzeschakelaars 1 en 2 Displays: 2 LED-displays met voorloop- en hold-functie voor stroom, spanning, tijd Tijdfuncties: 4-standenschakelaar: UIT, langzame puls, snelle puls, puntlassen Ontsteking: 4-standenschakelaar: UIT, hoogfrequent, Lift-Tig Energieregeling: 4-standenschakelaar: op het systeem, hand- of voetafstandsbediening, lastoorts Bedrijfsmodus: 4-standenschakelaar: 2-takt, 4-takt, 4-takt met 2 stromen, gastest, test, programma Programmageheugen: 20 vrij toewijsbare geheugenplaatsen AC-frequentie: 50-200 Hz AC-balans: 9-91% Gasvoorstroomtijd: 0-3 s Gasnastroomtijd: 0-25 s Stroomstijgingstijd: 0-2 s Stroomdalingstijd: 0-20 s Ontstekingspuls: 0-100 ms Puntlastijd: 0,1-2,5 s Langzame pulsen: 10 ms-2,5 s Snelle pulsen: 50 Hz-5 kHz Hotstarttijd: 0-1,5 s Hotstartstroom: 10-200% Stroominstelling: 100-250% Knop: Testbeveiliging Knop: Programmaselectie LED: Netspanning AAN, Overtemperatuur, Storing, Beveiligingscircuit, Display hold, Startstroom Stijging, Stroom 1, Stroom 2, Reductie, Eindstroom Stroombron: IGBT-omvormer Ontsteking: Hoogfrequent of Lift-Tig Norm: EN 60974-1 "S" / CE Toortsaansluiting: EURO-centrale aansluiting met 5-polige stekker Toortskoeling: Watergekoeld koelsysteem 50 mm² aansluiting: Werkstukkabel 50 mm² aansluiting: Elektrodelaskabel Netaansluiting: 4 x 4 mm², 5 m lang Gasaansluitslang: 2 m Gewicht: 130 kg (300 AC/DC) Afmetingen L x B x H: 910 x 600 x 910 mm met gasfleshouder Gasfleshouder: 10 - 20 - 50 l gasfles Financing through our bank is also possible. komplett-konzept.leasingo.de Vind meer artikelen - nieuw en gebruikt - in onze shop! Internationale verzendkosten op aanvraag!

Condition: used, Extraction system, central extraction system, room air filter system ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of construction approx. 2005 Volume flow approx. 5000 m³/h Isdpsicic Hofx Anwjic Extraction connection at filter inlet 1200 x 150 mm Exhaust air connection at filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 Volt, 50 Hz - Control cabinet for wall mounting - Pocket filter - Maintenance flap for filter change - Radial fan on top of the unit Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg Very good condition

Condition: used, Welding fume extraction unit for wall mounting, KEMPER extraction device Type 85400 Serial number: 279092 Year of manufacture: 1997 Volume flow: 1700 m3/h Static pressure: 2000 Pa Extraction connection: Ø 250 mm Motor power: 1.5 kW Power supply: 400 Volts, 50 Hz - Radial fan - Designed for a mechanical air filter with approx. 99% separation efficiency - Main filter defective (surcharge for new main filter: EUR 195 net) - Articulated extraction arm Ø 150 mm, approx. 2 meters long - Extraction pipe with 3 joints and extraction hood (adapter connection to filter housing missing) - No external control unit, without filter monitoring, without start switch Iijdpfou S Tfgjx Anwsc - Air outlet: 250 x 140 mm Required space (L x W x H): 680 x 660 x 1100 mm Weight: approx. 120 kg Good condition Surcharge for new main filter: EUR 195 net

Condition: new, Year of construction: 2026, functionality: fully functional, working height: 2,200 mm, BUMEX Sp. z o.o. offers a professional industrial washing system designed for the preparation of components prior to the powder coating process. The equipment has been engineered for demanding industrial environments where washing efficiency, process stability, and long-term durability are essential. The washing system enables effective preparation of steel and aluminum components through a multi-stage cleaning, degreasing and rinsing process. Technical parameters Working chamber dimensions: 1500 × 3200 × 2200 mm Process technology: 3-stage washing process Process tanks The unit is equipped with three process tanks: tank for cleaning / degreasing chemicals tank for rinsing water tank for demineralized water (DEMI water) Tank capacity: 1500 – 2000 liters DEMI water generator The system is equipped with a demineralized water generator, ensuring high-quality final rinsing and optimal surface preparation before powder coating. Heating system The chemical tank is equipped with a heating system for the process liquid. Available heating options: oil heating gas heating electric heating Maximum operating temperature: up to 60°C Machine construction The machine is manufactured entirely from high-quality stainless steel AISI 1.4301, which provides: excellent chemical resistance long service life easy maintenance and cleaning The washer features: very robust industrial construction full thermal insulation of the entire machine to reduce energy losses spray system designed for minimal mixing of process liquids pre-filter for collecting contaminants high washing efficiency Control system The machine is equipped with a fully automatic control system, enabling precise control of: process temperature pump operation washing time sequence of process stages Why choose BUMEX? Our equipment stands out on the market due to: very high manufacturing quality robust industrial construction operational safety complete technical documentation possibility of adapting the equipment to the existing production facility All machines manufactured by BUMEX Sp. z o.o. are CE certified. Additional technological support BUMEX also provides: powder coating booths dust extraction and filtration systems industrial ventilation systems professional technological consulting Iedpfehfv D Ssx Anwoic Cooperation conditions company transport available (price determined individually) VAT invoices issued short production lead times possibility of manufacturing machines in custom configurations and dimensions

Year of construction: 1988, condition: ready for operation (used), A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range: 250mm-1600mm, mesh length range: 600mm-2900mm, min. cross wire pitch: 15mm, min. longitudinal wire pitch: 25mm, increments of longitudinal wire pitch: 5mm, wire diameter range: 3mm-8mm, number of longitudinal wires: 20, number of welding presses: 12, rated power at 50%: 6x130kVA. On-site inspection is possible. Iodpfx Anowfg Ewswsic

Year of construction: 2006, condition: ready for operation (used), A complete Severt robotic welding system is available. Travel path X: 8000mm, robot axes: 6, stations: 2, axis positioners: 2, positioner speed: 6rpm, positioner load capacity: 1000kg, faceplate torque: 1000Nm, power source: OTC DP 500, power output: 350A. Including seam tracking sensor, push-pull torch, hose packages, wire guide spirals, contact tips, gas nozzles and additional items. Documentation vorhanden. On-site inspection is possible. Iisdpfx Ajx U Dxaenwsc

Year of construction: 2013, condition: ready for operation (used), A laser system with 1 loading station and two stations each is available. Welding fixtures: 4, laser power: 3.3kW, beam source: TruDisk 3302 disk laser, workpiece dimensions X/Y/Z: 300mm/100mm/100mm, material thickness: 1.5mm, welding speed: 5600mm/min, welding optics: Trumpf BEO D70, operating hours: approx. 70000h. Documentation available. On-site inspection is possible. Iiodev Rfrbepfx Anwsc

Year of construction: 2014, condition: ready for operation (used), An ultrasonic welding system with nine Telsonic Ultrasonic, cabin, nine generators and documentation is available. Control system: Siemens SIMATIC PANEL. On-site inspection is possible. Iodpfsuy T Nqsx Anweic