Used Laminating Lines for sale (9,251)

Condition: used, Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Dcedpfx Aoihf Tpokhek Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Dcsdpfx Aksixqg Njhek Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Djdpfxeihf Two Akheck Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Dcsdpfxjtiy Nte Akhek Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: used, KRONES ROUND GLASS LINE 500/600BPM 700ml, 750ml, 1 Litre STORK MINIATURE LINE 200 BPM 50ml Glass & PET BERTOLASO LINE 200BPM 200ml, 300ml, 375ml, 500ml Glass & PET STORK GLASS LINE 200BPM 350ml, 700ml, 750ml, 1.14 Litre Dcedpfozrf A Eex Akhok

Condition: used, Year of construction: 2024, Bavelloni VE350-8 Straight-Line Vertical Edging Machine. Serial No. 110000297 (2024). Country of Origin: Italy Pre-Auction Offers Considered Dcedpfx Akezr Iwrjhsk Location: This lot is located in Burton-on-Trent, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Year of construction: 2013, condition: good (used), Technical specifications: (1) Minimum format: 400 x 400 mm Maximum format: 1260 x 1250 mm Dcsdpszry I Nofx Akhsk Top sheet: Cardboard from 180 – 450 g/m2 Bottom sheet: Between 0.5 and 8 mm Maximum speed: (2) Up to 6000 sheets/hour Accuracy: ± 1.5 mm Installed power: 17 kW Dimensions: 13.9 x 2.22 x 2.68 m Weight: 7,000 kg (1) The manufacturer may modify the technical specifications without prior notice. (2) The speed may vary depending on the material and its quality, formats, and other production requirements.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, HGG RPC 1200 CNC Robot Coping Line- Year 2017. 18 metres in feed and outfeed rollers. Staubli 6 axis robot. Kjellberg Fine Focus Plasma Unit. Dust extraction. 1200mm Capacity. Dodpfxjzrp T Ie Akhsck

Condition: excellent (used), Year of construction: 2018, Profiling machine Djdpfx Aoztkw Dokhjck

Condition: used, Year of construction: 2005, functionality: fully functional, pressing force: 200 t, table width: 300 mm, cutting height with scoring (max.): 100 mm, milling spindle length: 250 mm, Equipment: 1 GRECON feed transfer with accumulation of 4 to 5 cleaned lamellas of different lengths for finger-jointing 1 GRECON double finger-jointer for deep teeth (for glulam beam production) 1 180° transfer with two-component gluing system 1 GRECON finger-jointing press 1 CNC-controlled cross-cut saw 1 outfeed table Dsdjwz H Anjpfx Akhjck

Year of construction: 2024, operating hours: 10 h, condition: ready for operation (used), functionality: fully functional, screw conveyor diameter: 145 mm, TECHNICAL DETAILS Dcodozr Hz Aepfx Akhok Extruder type: Single-screw extruder / melt extruder Screw diameter: 145 mm Heating: Induction heating MACHINE DETAILS Drive power: 45 kW Suitable plastics: LDPE, HDPE, PP Suitable materials: Ground material, EPS, film scraps, ground film, and light plastic waste Material feed: Suitable for materials with low bulk density Operating hours: 10 h EQUIPMENT Stuffing device Hopper for material feed Large filter / screen changer Adapted die

Condition: ready for operation (used), functionality: fully functional, Offer without Obligation LAMINATOR EUROLAM III-IDH 540 G10P Bogengröße / Paper Size max. 540x740mm Arbeitsgeschwindigkeit / Laminating Speed max. 30m/min Papierstärke / Substrate Thickness 120-350g/㎡ Front Roller Diameter T: 163mm / B: 150mm Rear Roller Diameter Laminating Temperture max. 150℃ Power Consumption 12kW - machine is in perfect running condition. Price under request Dsdpfxozrlu Ie Akheck Availability: Immediately ! Please ask for further detailed pictures ! Video available !

Condition: used, Year of construction: 2004, functionality: unexamined, input voltage: 400 V, input frequency: 50 Hz, Werner & Pfleiderer bread production line. Djdpfx Aezrpynjkheck

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: Mini 76 TH, type of input current: AC, input voltage: 400 V, working width: 760 mm, AUTOBOND MINI 76 TH automatic laminator. 2015 Model. Fully refurbished. Max sheet size: 76 x 105cm Min sheet size: SRA4. Speed: 60 m/min. 22 million impressions. Heidelberg Feeder. Tool temp YCU. Jogger delivery. Dedszpw Izepfx Akheck Optional post heat system.

Condition: good (used), functionality: fully functional, High-frequency press for glulam beams up to 22 meters maximum pressing width: 1300 mm maximum pressing thickness: 300 mm Dcsdew A Hk Ijpfx Akhjk loading conveyor 3,000 mm press with section-by-section polymerization (3 meters each)

Condition: used, Year of construction: 2016, chainsaw equipped with a chain sharpener, chain feed mechanism, and output with ejectors high-speed chainsaw Dcodpfxjzb Rhmo Akhek

Condition: good (used), Year of construction: 1998, functionality: fully functional, working width: 1,300 mm, 1 bottom calibrating sander equipped with 3 bottom belts 30, 22, 18.5 kW 1 top calibrating sander equipped with 3 top belts Dcedpfxow A A Enj Akhjk

Condition: good (used), Year of construction: 2004, functionality: fully functional, input voltage: 400 V, total length: 6,700 mm, working width: 650 mm, total width: 1,100 mm, table length: 5,200 mm, Canol Make-Up-Line "Canolino" 5.2 (with about 670 cm overall length) Make-up-table / -line / dough-processing-line "Canolino" 5.2 with about 65 x 520 cm working belt, year 2004, designed to produce a wide variety of products like puff- pastry products with odr without filling, yeasted products and other pastry specialities. The "Canolino" line is easy to use and mounted on wheels, it comes with a dough-belt calibraion head, a huge varity of different cutting rollers (incl. croissant roller or special roller for "Stutenkerle" (=sweet-yeast-dough / gingerbread-man), a water-drop humidification station, a volumetric filler (V4 F) / electric screw-depositor with 4 outlets, suitable for dosing creamy products with spot, continuous or intermittent dosing, a motorised winding roller, for example for snails or other wound products, various winding and folding tools and pressure rollers as well as a motorised guillotine knife for cross-cutting. Perfect for the use in small and medium-sized bakeries. The wide range of easy-to-use and also easy to mount accessories can be changed in a short time nearly without tools. The electric guillotine can also be moved on the desired position. The make-up table is manual controlled for very simple operation and managing the various work functions. All components and accessories are electrically operated (also filler, guillotine knife) so there is generally no need to use compressed air. Dsdpfx Aoy Na T Nekheck The make-up-line and all accessories (as shown in the photos) are in good "bakery-condition" and are offered for sale fully cleaned and ready for use. Dimensions: approx. 670 cm in total length, approx. 110 cm in width and approx. 195 cm in height (control unit and filling station)

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla pallet dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h Dodpfsv I Akvjx Akhock - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: ready for operation (used), Year of construction: 1993, A Dreistern roll forming machine is offered. Main drive power: 9.2kW, production direction: right to left, roll shaft diameter: 30mm, roll shaft connection: 20mm, tooling width of roll stand type 1: 135mm, center distance of type 1: 130mm, adjustment range of type 1: 60mm-100mm, tooling width of roll stand type 2: 210mm, center distance of type 2: 260mm, adjustment range of type 2: 80mm-130mm, control system: Siemens SIMATIC HMI. The gearbox has been fully overhauled. Inspection by appointment is possible. Dcjdpfx Aszta Edokhjk

Condition: used, Year of construction: 2025, COLOMBO R. Discontinuous sandwich panel production line Djdpfszrhtmsx Akheck Complete PUR sandwich panel production line for manufacturing panels up to 8 meters in length. Fully automated and equipped with a heated press, high-pressure foaming machine, and integrated roll forming system. A high-performance industrial solution for producing roof and wall sandwich panels in compliance with European standards. Production specifications - Production of sandwich panels up to 8 meters long. - Panel thickness: 40 - 100 mm. - Pre-painted steel thickness: 0.40–0.80 mm. - Manufacturing of roof and wall sandwich panels. - Capability to produce tile-effect sandwich panels. - Automatic cut-to-length system. - Automated machine settings. - Electrical components from leading brands: Siemens, Rexroth, Schneider Electric, Omron, and SMC. Line configuration - 4-platen heated press. - Maximum panel length: 8 meters. - Production of polyurethane (PUR) insulated sandwich panels. - ULTRAMIX 100 high-pressure foaming machine with 1:1 mixing ratio and self-cleaning mixing head. - Complete roll forming line for steel facings. - Two roll forming lines for manufacturing different panel profiles. - 7-ton hydraulic decoilers. - Automatic hydraulic cutting system. - PLC control system with touchscreen interface. - Automatic control of panel lengths and production quantities. - Fully automatic dosing of foam components. - CE-compliant installation with integrated safety systems. Included - Complete production line. - High-pressure foaming machine. - Heated press. - Roll forming equipment. - Outfeed tables. - Electrical control cabinet. - PLC control system. - Technical documentation included. Panel length: Up to 8 meters Panel thickness: 40 - 100 mm Pre-painted steel thickness: 0.40 – 0.80 mm Panel types: Roof and wall sandwich panels, capability to produce tile-effect sandwich panels Control system: PLC control with touchscreen interface and automatic settings Foaming machine: ULTRAMIX 100 high-pressure foaming machine (1:1 mixing ratio) Press type: 4-platen heated press

Condition: new, Year of construction: 2025, A typical coating system consists of surface pretreatment (cleaning and/or application of a conversion coating), intermediate drying, an electrostatic coating zone (booth/powder coating station), and a curing oven. The workpieces are transported through the system by a conveyor system. Our company, ROMER®, plans, manufactures, and assembles complete powder coating lines. Our systems can be inspected and tested at our facility in Hürth near Cologne. Dedpfecv Nl Rex Akheck Request a quote for a system tailored to your specific application.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, For sale is a professional, heavy-duty band resaw (slitting saw) from the renowned Italian manufacturer CENTAURO S.p.A., model SUPERCUT 80. Dedpfx Akszti T Rehjck The machine was manufactured in 2014 and comes from a line of technologically advanced saws designed for extremely precise cutting of wood into thin strips and veneers. Thanks to its robust construction and high frame rigidity, it guarantees perfect cutting geometry while maintaining high performance. Full technical specifications (from the nameplate): Manufacturer: CENTAURO S.p.A. (Italy) Model: SUPERCUT 80 Year of manufacture: 2014 Main motor power: 15 kW (approx. 20 HP) – ensures stable operation even with hard exotic wood species and oak. Wheel speed: 680 rpm Diameter of cast iron wheels: 800 mm Certificate: CE (full documentation and compliance with safety standards)

Condition: ready for operation (used), functionality: fully functional, For sale is a wood chipping line (chipper canter line) with the following components: - Log infeed - Step conveyor for logs, manufacturer Saenger + Massierer - Singulator - Log conveyor - Centering infeed with log turner, manufacturer Kockums, type 447-6 C, serial number 70984 - Chipper centering device, manufacturer Kockums, type 240-12 D - Outfeed conveyor with lateral discharge option - Control cabinet and control system (Siemens Simatic Panel) for the entire line - Max. log diameter: 50 cm Dedpfx Aozrfkvskhsck The line is sold excluding any warranty and liability for defects.

Condition: used, Industrial shredder or shredding line with carbide blades for shredding various materials such as wood, cardboard, glass fibre mats or similar, e.g. as a pre-treatment for recycling processes. The plant consists of two feed conveyors, the shredder, a transport fan and a soundproof enclosure. Technical data: Dedpfx Akozrx Hdshsck - Total power: 31.7 kW - Shredder motor: 7.5 kW - Feed width: 550 mm - Feed height: approx. 25/75 mm - Fan: 22 kW / 10,800 m³/h