Used Mack Xyz for sale (165)

Condition: used, XYZ 2-OP Compact Vertical machining Centre Year 2017 Ijdpfszu Ni Usx Ag Astn Pro-Track TMX Control Table Size: 457 x 381 mm X/Y/Z Travels: 355 x 305 x 455 mm Spindle Speeds: 50- 6,000 rpm Spindle BT 30 Spindle 3hp 8 Station Tool Changer Machine Weight: 1,100 kg Footprint: 760 x 1,220 mm

Condition: excellent (used), Year of construction: 2023, Distance between Centres 1000mm, Swing 360mm, Swing over cross-slide 225mm, Spindle Speed 50-4000rpm, 52mm spindle bore, Ijdpsxz Dqgefx Ag Ajtn Prototrak RLX control, toolpost, 3 jaw chuck, Coolant, interlocked guards

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Itedpfexftqdex Ag Aen Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM Isdpfxezb Ipzs Ag Ajtn 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Coolant pump and tank

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 172822052, SPECIFICATION Trunnion table size 600mm diameter X axis traverse 600mm Y axis traverse 600mm Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation 360 degree Maximum table load 600Kg Spindle BT 40 Maximum spindle speed 15,000rpm Spindle motor 22.4kW Maximum spindle torque 239Nm at 1100rpm Spindle motor 35kW Isdpjt Dmlfefx Ag Aetn Rapid feed rate X,Y,Z axis 36m/min Rapid feed rate C axis 540 degrees a second (90 rpm Rapid feed rate A axis 99 degrees a second (16.6rpm) Toolchanger capacity 32 tools Approx. weight 9500kg   MACHINE EQUIPPED WITH:- Siemens 840DSL CNC control system with Shop Mill Through spindle coolant, 20 bar Swarf Conveyor Laser toolsetting Traori-this function keeps the tool in an optimised cutting position relative to the workpiece when 5 axis simultaneous machining Networking Lighting Enclosed Guarding

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Table size 900mm x 500mm, spindle speed 8000rpm, spindle motor power 11kW, Prototrak, rapid feed XYZ axis 20m/min, Ijdpfeq R Tnzox Ag Aetn Spindle taper BT40, 16 station ATC, swarf auger.

Condition: used, For sale: Fuel tank Mack Trucks V3*1549 Dimensions: length 1040 mm, width 740 mm, height 700 mm Width with brackets: 830 mm Smaller opening: 50 mm, larger opening: 100 mm Itsdpfxsyymr Tj Ag Aen Capacity: approx. 539 litres Net price: 150 Euro negotiable

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 5474, total width: 2,450 mm, total length: 18,000 mm, total height: 1,600 mm, overall weight: 4,000 kg, cutting length (max.): 6,000 mm,

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Year of construction: 2025 Condition: Showroom Specifications: - X-axis: 4000 mm - Y-axis: 1000 mm - Z-axis: 1000 mm - 26 kW (S6) main motor - 8000 rpm - BT-40 - Automatic tool changer (24 positions) - Remote service (IXON) + network connection - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available Itodew Ty S Sjpfx Ag Asn

Condition: like new (used), Year of construction: 2022, operating hours: 238 h, functionality: fully functional, machine/vehicle number: PR5-2500-07221514, type of input current: AC, sheet thickness (max.): 22 mm, overall weight: 1,000 kg, input voltage: 230 V, total width: 2,200 mm, total height: 1,500 mm, total length: 3,800 mm, cutting height (max.): 120 mm, table length: 2,500 mm, working width: 1,250 mm, table width: 1,250 mm, cutting current: 105 A, working length: 2,500 mm, input current: 6 A, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 120 mm, type of cooling: water, height adjustment type: electric, input frequency: 60 Hz, Equipment: documentation/manual, Swift-Cut PRO 2500 MK5 CNC Plasma + Hypertherm 105 (LIKE NEW / 238h) We can assist with loading! 🇬🇧 ENGLISH DESCRIPTION: Condition: LIKE NEW (Only 238 operating hours, approximately 1 month of actual use). Availability: Immediately available. We offer a top-of-the-line CNC plasma machine, the Swift-Cut PRO 2500 MK5 (UK, 2022). In perfect technical and visual condition, ready for immediate production. Equipped with a highly efficient Hypertherm Powermax 105 and a water table. Key Technical Specifications: - Cutting area (L x W): 2500 x 1250 mm - Z-axis clearance: 120 mm - Plasma source: HYPERTHERM Powermax 105 - Table type: Water table - Power supply: 110-230 VAC; 50/60 Hz Software Included: - CNC Controller - 2D Design: Solid Edge 2D - Nesting: SigmaNEST Companion Advanced Features & Equipment: - Soft Sense (IHS): Accurate piercing and cutting height control - DTHC: Dynamic and automatic voltage correction - XYZ Torch Protection: Advanced collision protection (Magnetic head) - Laser pointer for easy positioning - Precision linear rails and planetary gears Transport & Logistics (Our MAJOR Advantage): - FREE Loading: Professional and safe loading included! - Transport Assistance: We assist in organizing fast and cost-effective transport within Europe. - Video of the machine in operation available upon request; on-site testing is welcome. 🇩🇪 DEUTSCHE BESCHREIBUNG: Itsdjztu Aqjpfx Ag Aon Condition: LIKE NEW (Only 238 operating hours, approximately 1 month of use). Availability: Immediately available. We offer a top-class CNC plasma cutting machine, the Swift-Cut PRO 2500 MK5 (UK, 2022). Perfect technical and visual condition, immediately ready for operation. Equipped with a highly efficient Hypertherm Powermax 105 and a water table. Key technical data: - Cutting area (L x W): 2500 x 1250 mm - Z-axis clearance: 120 mm - Plasma source: HYPERTHERM Powermax 105 - Table type: Water table Included software: - CNC control - 2D Design: Solid Edge 2D - Nesting: SigmaNEST Companion Advanced features & equipment: - Soft Sense (IHS): Accurate piercing and cutting height - DTHC: Dynamic voltage correction during cutting - XYZ Torch Protection: Advanced collision protection (Magnetic head) - Laser pointer for easy positioning - Precision linear rails and planetary gears Transport & Logistics (Our MAJOR Advantage): - FREE loading: Professional loading included in the price! - Transport support: We help organize transport in Europe. - A video of the machine in operation is available upon request, on-site testing possible.

Condition: used, mileage: 1,083,348 km, power: 324 kW (440.52 HP), first registration: 04/2004, fuel type: diesel, tire size: 315/70 R22.5, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: other, total length: 5,900 mm, total width: 2,500 mm, total height: 3,500 mm, Year of construction: 2004, Equipment: ABS, air conditioning, cruise control, electric window regulation, power assisted steering, = Additional options and accessories = - Aluminum fuel tank - Immobilizer - Sleeping cabin = More information = Tyre size: 315/70 R22.5 Front axle: Steering; Suspension: parabolic suspension Itodpfx Aszz Nb Rsg Aen Rear axle: Double wheels; Suspension: air suspension Empty weight: 7.200 kg Carrying capacity: 11.800 kg GVW: 19.000 kg

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: HELIX 30, Current Status & Availability: The stretch wrapping machine is fully operational and is currently in daily use. Availability: The entire system is currently fully integrated into production and can be inspected under operating conditions after consultation. The planned dismantling/replacement must be carried out by the buyer during calendar week 46-47/2026. Iodpfxsy Sziqs Ag Aetn System Description: - Stable 4-column construction - Rotating arm with film carriage - Top sheet applicator (integrated) - Turntable for pallet rotation - Automatic pallet height detection using a photoelectric sensor - Variable adjustable number of top and bottom wraps - Variable adjustable wrapping program - Blowing unit: this unit blows air onto the beginning of the film from below and wraps it in. - Pre-stretch system P.G.S.A., see section 1.5 1.5.1 For reducing film consumption and increasing load securing - With this pre-stretch system, the tension of the film on the load can be adjusted via the adjustable dancer roll. - PLC control system Siemens S7-200 with a free-standing control cabinet - Machine operation and information texts via operator display - Triple indicator lights to display the operating states - Machine equipped with Robopac standard components - Electrical installation according to protection class IP 54 - Documentation - Machine complies with CE and EMC standards Safety light barriers at the infeed and outfeed (standard Robopac Sistemi). In accordance with the EC directives for machinery (EC Directive 89/392), the system receives a CE marking and is supplied with a declaration of conformity. - Machine equipped with European safety standards with EMC (89/336/EEC) and EU standards in excerpts EN 292, EN 294, EN 811 EN 60204 - Machine will be completely assembled and tested before delivery - Packaging suitable for transport by truck (machine on a wooden pallet covered with film)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: VKE / FLPS2 – 4APC/S, type of input current: three-phase, Automatic Vertical Strapping Machine VKE / FLPS2 – 4APC/S Current Status & Availability: The strapping system is fully operational and is currently still in daily use. Availability: The entire system is currently fully integrated into the production process and can be inspected under operating conditions after prior arrangement. The planned dismantling/replacement must be carried out by the buyer during calendar week 46-47 / 2026. Technical Data: Pallet Types: Pallet width 500 to 1000 mm Pallet length 600 to 1200 mm Package height (incl. pallet) min. 500 - max. 2000 mm Conveyor height 500 mm Weight (incl. pallet) 150 to 1000 kg Package stacking method: automatic Under-stretching: no Conveyor speed: 12 m / min Pallet transport direction: lengthwise onto lengthwise boards Centering accuracy: centered on the stop light barrier Machine Components: Pneumatics: Festo Iodpfx Aey Szfleg Aotn Gear motors: SEW Control system: PLC S7-200 Control cabinet: Rittal Protection class: IP 55 Main switch: Möller Fuses: Siemens Relays: Omron Push buttons: Siemens Signal lights: Telemecanique Light sensors / light barriers: Datalogic Inductive proximity sensors: Omron / Siemens Cam switches: Siemens Contactors: Telemecanique

Condition: good (used), functionality: fully functional, overall weight: 700 kg, For sale is a used Deckel FP1 milling machine in good working condition. The machine has feed in the X and Z axes. Travel ranges XYZ: 300x150x340mm Tool holder: SK40 S20x2 Spindle speeds: 40-2000 rpm Quill with 60mm stroke Itedpfjz Aa Idjx Ag Ajn Ideal machine for toolmaking or prototype production. Already the new version of the FP1 with selector dials for speed and feed selection. Included: - High-quality hydraulic vise - Chip tray Milling cutters and tool holders can also be included upon request. Loading options (forklift) are available. Shipping is also possible upon agreement. Inspection under power and collection in 5023 Salzburg.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, rotational speed (max.): 2,500 rpm, swing diameter over bed slide: 470 mm, center width: 1,000 mm, TECHNICAL DETAILS Distance between centres: 1,000 mm Swing diameter over bed: 470 mm Spindle speed ranges 1: 50–270 rpm 2: 150–850 rpm 3: 450–2,500 rpm MACHINE DETAILS Electrical supply Mains voltage: 415 V Phases: 3 Frequency: 50 Hz Ijdpsywg Rdefx Ag Astn Control voltage: 24 V Main motor power: 7.5 kW Main motor current draw: 13 A Auxiliary motor power: 0.173 kW Auxiliary motor current draw: 1.55 A Total motor power: 7.673 kW Total current draw: 14.55 A

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Machine Type: 5 Axis (4+1) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. Ijdpfxey St Sds Ag Ajtn The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2007, operating hours: 20,000 h, functionality: fully functional, total height: 1,800 mm, total length: 1,000 mm, total width: 1,200 mm, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 6 m/min, feed length X-axis: 600 mm, feed length Y-axis: 600 mm, feed length Z-axis: 50 mm, We offer this used DIMA (Selective Protective Coating Machine) Hybrid Coating System HC-200, manufactured in 2007. Sale is ex works. Operating hours: 20,000 h, machine is operational. If you have any questions or require further information, please send us a message or call us. On-site inspection is welcome. Technical data: Type: HC-200 Selective protective coating machine Dimensions (L x W x H): 1000 x 1200 x 1800 mm (+500 mm for signal light) Stepper motor in combination with encoder, with ball screw and linear guide and spline axis Itsdpfxsz Ix R Eo Ag Aon XY speed 0.2 m/s Z-axis speed 0.1 m/s XYZ resolution 0.00625 mm Resolution of the rotary axis 0.036° Rotation 370 degrees Working area (based on a valve on the Z-slide) 600 x 600 mm – Z-movement 50 mm Inline chain conveyor 500 x 600 mm – Z-movement 50 mm Inline belt conveyor with clamping 525 x 600 mm – Z-movement 50 mm Min./Max. conveyor width (chain): 35 mm / 500 mm (manually adjustable) 35 mm / 500 mm (automatically adjustable) Min./Max. conveyor width (belt): 35 mm / 500 mm

Condition: ready for operation (used), Year of construction: 2022, number of axes: 3, This XYZ PRINTING MfgPro230 xS 3D Printer machine was manufactured in the year 2022 in Taiwan. The machine disposes of a vacuum, accessories, powder separator and a Nitropur 800-POK Special air separator. Additional equipment • Material starter kit PA11 ESD BASF Itodez E Hhaspfx Ag Ajn Machine Benefits Technical Machine Benefits • Sinterit fz154 sandblaster sls lisa, lisa pro, lisa x, nilsxyzpro mfgpro230 xs 3pl01xus00f 3d printer • Sinterit fz138/fz176 phs station 2022 incl. Separator • Interit fz101/fz188 atex vacuum cleaner 230v vacuum, accessories, powder separator • Air separator nitropur 800-pok special • Build volume: 230x230x230mm • Min. Layer thickness: 0,08mm • Max. Chamber temperature: 180°c • Operating software: buildware (control panel), slsware (slicer)

Condition: good (used), Year of construction: 2023, functionality: fully functional, Keyence MD-X2500A 3-Axis Hybrid Laser Marking System, 25W Laser Marker Used, from business liquidation Initial purchase: 03/2023 3-axis hybrid laser marking system, 25W special edition Marking laser (control unit + marking head) MD-C2B safety module MD-AD-XYT XY tracking add-on for MDX2 MD-AD-ZT Z tracking add-on for MDX2 MD-AD-2DR 2D code reader add-on for MDX2 MD-AD-3D 3D add-on for MDX2 Itsdpfx Agez H U Ude Aon Power cable for MDX/MDF/MLZ Marking process: Simultaneous 3-axis scanning (XYZ) Marking area: 125 × 125 × 42 mm Standard operating distance (± variable width): 189 mm (±21 mm) Marking resolution: 2 μm Scanning speed: max. 12000 mm/s Marking laser Wavelength: 1064 nm Output power: 25 W Rated voltage and power consumption: 100 to 240 V AC ±10 %, 50/60 Hz, 850 VA max. Weight: Control unit: 23.0 kg, Marking head: 13.8 kg PC software: MB-PH1 *1 (Marking Builder Plus, marking diagnostics tool) must be requested from Keyence We recommend an inspection Information without guarantee Details, information, and technical data from the manufacturer To prevent any misunderstandings regarding the item's condition and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 a.m. and 12:00 p.m. and 1:00 p.m. and 4:30 p.m. During this time, inspections and collections are possible and desirable, AFTER prior appointment arrangement. Subject to prior sale, changes, errors and omissions.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 5,800 h, power: 60 kW (81.58 HP), travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,400 mm, workpiece height (max.): 1,400 mm, workpiece weight (max.): 2,000 kg, number of axes: 4, controller manufacturer: Siemens, controller model: 840D SL, torque: 1,146 Nm, rotational speed (max.): 8,000 rpm, Equipment: CE marking, documentation/manual, Machine name / type: HELLER / H 8000 Operating hours: 5800 Year of construction: 2020 Control unit: Siemens 840D SL Ijdpfou Urgbjx Ag Ajtn Spindle: EPC-Unit (8.000 1/min, 60 kW, 1146 Nm) Tool clamping system: HSK 100 Tool magazine / places: Chain / 100 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, KF 600, IKZ 70 bar, (work area flushing) Positioning range XYZ (mm): 1250 / 1200 / 1100 Pallet size (mm): 800 X 800 Workpiece clamping: mechanical Additonal options / Specifics: multi-spindle-head support (MSK); receiver for measuring probe (RENISHAW); fast drill fracture sensing (SBBK); interface exhaust system; screen blow-off device for operator door; codechip; Chip conveyor function check; Integrated process monitoring (IPM) + Monitoring function to minimize machine damage in case of collision; 3 colour status lamp; increased tool weight 35kg; scraping conveyor for wet machining; Coolant temperature control; Feed force display; Tangential control;

Condition: excellent (used), Year of construction: 2012, operating hours: 1,800 h, FEELER VMP-1100 CNC Vertical Machining Centre with NIKKEN CNC202 FA 4th Axis Year 2012 Control FANUC 0i-MD Table size 600 x 1200 mm Travels XYZ 1100 x 610 x 600 mm Spindle nose to table 137 - 735 mm Spindle centre to column 660 mm Spindle speeds to 10000 rpm Spindle taper BT 40 Spindle motor 18.5 kW Number of tools 30 ATC Rapid traverse X & Y 36 m/min, Z 24 m/min Weight 6800 kg Supplied with: BLUM Tool Probe, Swarf Augers, Rear Swarf Conveyor, Spindle Chiller, Filtermist FX5002, Tooling Package. NIKKEN CNC202 FA 4th Axis complete with 200 mm Diameter Faceplate, 135 mm Centre Height, 115 mm Riser Block, Tailstock and Mounting Sub Plate/Table. Itodez R Tn Hspfx Ag Aen For sale with Jet Machinery Ltd Jet Machinery Stock No: #27003 Machine Serial Number: VNJ1074 Cost: £34,950.00 + VAT

Condition: excellent (used), Year of construction: 2019, Traverses XYZ: 762 x 508 x 508mm, 500mm x 500mm table, max table weight 300kg, Itjdpfsz Sqqmex Ag Aon table tilt +110°, -35°, 22.4kW, 15000rpm, BT40, 40 station tool changer, Through spindle coolant, Tool Setter, Programmable coolant,

Condition: new, Year of construction: 2018, Various electric motors with pumps. Blowers by KSB and Uraca, electric motors individually or with blower. Also available for individual sale. Itodpoy En Dhefx Ag Asn

Condition: like new (used), Year of construction: 2012, operating hours: 5,607 h, functionality: fully functional, 2012 LEADWELL MCV 1500i+ (4 Axis) VMC Category: Vertical Machining Centers (VMC) Reference No.: 400140 Capacity: 1520 X 1016 X 720 MM Year of Construction: 2012 Technical Specification: SPINDLE Spindle Taper : CAT/BT 50 Spindle Speeds : 4000 RPM WORKING CAPACITY Table Size : 1550 x 1000 mm Travels (XYZ) : 1520 x 1016 x 720 mm Spindle Nose to Table (Min.- Max.) : 120 - 840 mm Itjdpfx Agox Ehibo Aen ATC Tool Change Capacity : 24 Tools ATC Type : ARM CNC Control : Fanuc Oi-MD Additional Details: 12" 4th Axis

Condition: excellent (used), Year of construction: 2015, operating hours: 28,000 h, functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, spindle speed (min.): 14,000 rpm, operating hours of spindle: 14,500 h, coolant supply: 20 bar, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Machining center Deckel Maho DMC 1150V Technical data CNC control: Siemens Ergoline Travel in X-axis mm: 1150 Travel in Y-axis mm: 700 Travel in Z-axis mm: 550 Feed rates m/min: 42 Max. spindle speed rpm: 14000 Coolant supply through the spindle bar: 20 Tool holder: SK 40 Magazine: 30 Chip conveyor Tank capacity liters: 600 Measuring probe Infrared tool measurement TT140 Coolant gun Itedpfx Aoz Ayg Tsg Aon Direct measuring system XYZ Operating hours: 26,600 h Spindle operating time: 11,000 h Base machine: Dimensions/Weight L/W/H mm: 3600 x 2300 x 2700 Weight kg: 5750