Used Metora - Kaltenbach Hmb 380 Ds for sale (6,375)

Condition: new, machine/vehicle number: cf997e3303ed59631e2030c1b, overall weight: 38,000 kg, axle configuration: 3 axles, tire size: 385/55 r22,5, Further information Chassis Saddle Container Fine-grained steel welded construction, saddle plate with interchangeable 2 kingpins and 2 kingpin positions Container mountings: Rear extension retracted: 1 x 20 feet or 1 x 30 feet Rear flush Center telescope 1st stage, rear extension extended 1st stage: 2 x 20 feet or 1 x 40 feet with and without gooseneck tunnel Center telescope 2nd stage, rear extension extended 2nd stage: 1x45 feet with and without gooseneck tunnel and overloaded to the rear. Center telescope as an interlocking central tubular frame with bolt lock With rear height adjustment and folding center supports for containers without tunnel Container guide at the front Plug-in and removable (electrical, air and brake connections at the front of the front cross member) Kledpfsi Ri Exjx Afdsr Plug-in adapter for front locking, for locking the containers without tunnel from below, with holder when not in use Rear extension mounted on rollers, with hand crank 24 t. 2-speed support winch, single-sided operation, with semicircular lower section and straight connecting plate, with thrust compensation 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Extendable underride guard for 45 foot containers Half-shell mudguards with anti-spray flaps according to EG Impact protection at the rear Axles+suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/55 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, rear and brake lights in LED, amber LED lighting on the side (note! with certain towing vehicles, misdiagnosis can occur although the function is given) 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Operating instructions Attention: Transport of filled tank containers is excluded! When transporting 45 containers with a short tunnel, with or without front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the total train length of 16500 mm is exceeded! The underride guard must be extended manually! A special permit in accordance with § 70 StVZo is required! Country of registration / plates Germany Test approval according to EG 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning sign according to ECE - 70 Contour markings with reflective strips to ECE R 048, white at the sides and red at the rear Paintwork Frame front section + rear extension hot-dip galvanized Rear section DB 7350 nova gray 10-year warranty against rusting through Support legs coated black ATTENTION: Archive pictures

Condition: new, machine/vehicle number: a203d9a559ff6484cf2a14c1f, empty load weight: 4 kg, maximum load weight: 33 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis Saddle Container Welded fine-grained steel construction, fifth-wheel plate with replaceable 2 kingpins and 2 kingpin positions Front locking on tipping ram support frame with guide wedges on both sides, rear locking on continuous pivot shaft with return spring Without subframe for self-supporting containers Container mounts: Locking cross member, 2-fold for locking 1 x 20 foot or 1 x 30 foot container. (Note! low fifth wheel load for 20 foot containers) Adjustment via central telescope as an interlocking central tubular frame with pin lock. 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Free support foot corner dimension or free swing radius to the rear approx. 1850 mm 2 wheel chocks with holder Half-shell mudguard with anti-spray flaps according to EG Ksdpfx Afei Ri Avsdjlr Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chlorinated, with HDK screw socket, fixed part, NW 48 mm. (without hose connection) Hydraulic actuation via truck power take-off Hydraulic connection with hose and HDK screw plug NW = 48 mm with knurled nut Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/65 R22.5 Manufacturer's choice Steel rims, factory silver Incl. Electrics 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Additional LED work light(s) at the rear, switched via reversing light Country of registration / plates Germany Test approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red on the rear Paint finish Frame DB 7350 nova gray 10-year warranty against rusting through Support legs coated black Attention: Archive pictures!

Condition: new, machine/vehicle number: 28b2dda4ac4da850b1010673a, empty load weight: 4 kg, maximum load weight: 33 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis Saddle Container Welded fine-grained steel construction, fifth-wheel plate with replaceable 2 kingpins and 2 kingpin positions Front locking on tipping ram support frame with guide wedges on both sides, rear locking on continuous pivot shaft with return spring Without subframe for self-supporting containers Container mounts: Locking cross member, 2-fold for locking 1 x 20 foot container (Note! low fifth wheel load for 20 foot containers) 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Free support foot corner dimension or free swing radius to the rear approx. 1850 mm 2 wheel chocks with holder Half-shell mudguard with anti-spray flaps according to EG Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chlorinated, with HDK Screw socket, fixed part, NW 48 mm. (without hose connection) Hydraulic actuation via truck power take-off Hydraulic connection with hose and HDK screw plug NW = 48 mm with knurled nut Axles + suspension 3 SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons Gross train weight Air suspension. Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the driver's cab, truck must be prepared accordingly, no truck instal. calibrated scales) Wheels and tires Klodsi Ri Eujpfx Afdor 6 385/65 R22.5 tires of the manufacturer's choice 6 steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Country of registration/ plates Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray 10-year warranty against rusting through Support legs coated black Attention: Archive pictures!

Condition: new, machine/vehicle number: 7dbf076fea9ec110acb399f8f, empty load weight: 5 kg, maximum load weight: 32 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Further information Chassis Saddle Container Welded fine-grained steel construction, saddle plate with interchangeable 2 kingpins and 2 kingpin positions Container mountings: Rear extension retracted: 1 x 20 feet or 1 x 30 feet Rear flush Center telescope 1st stage, rear extension extended 1st stage: 2 x 20 feet or 1 x 40 feet with and without gooseneck tunnel Center telescope 2nd stage, rear extension extended 2nd stage 1 x 45 feet with gooseneck tunnel and overloaded to the rear Center telescope 2nd stage, front extension extended 1st stage Rear extension extended 2nd stage 1 x 45 feet with long gooseneck tunnel and chamfered corners Center telescope as an interlocking central tubular frame with bolt lock With rear height adjustment and folding center supports for containers without tunnel Container guide at the front Plug-in and removable (electrical, air and brake connections at the front of the front cross member) Plug-in adapter for front locking, for locking the containers Without tunnel from below, with holder when not in use Front extension mounted on rollers, can be pulled out manually (for 45 containers with long tunnel) Rear extension mounted on rollers, with hand crank 24 t. 2-speed support winch, single-sided operation, with semicircular lower section and straight connecting plate, with thrust compensation 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Extendable underride guard for 45 foot containers Half-shell mudguards with anti-spray flaps according to EG Impact protection at the rear Axles+suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/55 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, rear and brake lights in LED, amber LED lighting on the side (Note! with certain towing vehicles, misdiagnosis may occur although the function is given) 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Operating instructions When transporting 45 containers with a short tunnel, with or without front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the total train length of 16500 mm is exceeded! The underride guard must be extended manually! A special permit in accordance with § 70 StVZo is required! Country of registration / plates Germany Klsdpfsi Ri R Sex Afdsr Test approval according to EG 2007/46 24/7

Condition: new, machine/vehicle number: 3703d600260244d5f159f51e4, empty load weight: 4 kg, maximum load weight: 33 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Further information Chassis Saddle Container Welded fine-grained steel construction, saddle plate with interchangeable 2 kingpins and 2 kingpin positions Container mounts: Incl. Rear extension retracted: 1 x 20 feet flush with the rear, attention low fifth wheel load Rear extension extended 1st stage: 1 x 30 feet, 2 x 20 feet, 1 x 40 feet with gooseneck tunnel Rear extension extended 2nd stage: 1 x 45 feet with gooseneck tunnel and overloaded to the rear without rear height adjustment and without folding center supports, no transport of containers without tunnel possible. Plug-in adapter for front locking, for locking the containers without tunnel from below, with holder when not in use Rear extension mounted on rollers, with hand crank 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Extendable underride guard for 45 foot containers Half-shell mudguards Incl. with anti-spray flaps according to EG Impact protection at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake system Colored line routing for easy service. 200 spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/55 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, rear and brake lights in LED, amber LED lighting on the side (Note! with certain towing vehicles, misdiagnoses can occur even though the function is is given) 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Operating instructions Attention: Transport of filled tank containers is excluded! When transporting 45 containers with a short tunnel, with or without front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the total train length of 16500 mm is exceeded! The underride guard must be extended manually! A special permit in accordance with § 70 StVZo is required! Country of registration / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) Kodei Ri Eqepfx Afdelr 24/7 service hotline Prepared for single-line license plate holder 390 Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Support legs coated black Attention: Archive pictures!

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting range round steel at 90°: 400 mm, cutting length (max.): 760 mm, working height: 720 mm, saw band length: 5,920 mm, TECHNICAL DETAILS Saw band dimensions: 5,920 x 41 x 1.3 mm Cutting speed: steplessly adjustable (1:7) Working range (round): max. 400 mm Working range (square): 400 x 370 mm Kjdpfxjyzn Hbj Afdolr Cutting length (single stroke): 10 - 760 mm Cutting length (multiple strokes): max. 9,999.9 mm Working height: 720 mm Clamping force: 3,600 N Minimum finished part length: 10 mm (35 mm vertical) Note: Dismantling and loading can be offered by the seller at an additional cost. Roller conveyor is not included.

Condition: used, Year of construction: 2008, KALTENBACH KKS 400 E HYDRAULIC METAL CIRCULAR SAW MAKE KALTENBACH, MADE IN GERMANY MODEL KKS 400 E Klodjy D I Nnepfx Afder YEAR 2008 SAW BLADE DIAMETER Up to 400.0 mm CUTTING CAPACITY AT 90 DEGREES ROUND: 130.0 mm SQUARE: 120.0 mm FLAT: 305.0 x 40.0 mm or 240.0 x 85.0 mm CUTTING CAPACITY AT 45 DEGREES ROUND: 130.0 mm FLAT: 245.0 x 30.0 mm or 180.0 x 70.0 mm MILTER ADJUSTABLE LEFT - RIGHT 0 – 90 DEGREES INFINITELY VARIABLE SAW BLADE FEED RATE 0 – 10 m/min SAW BLADE CUTTING SPEED 13 / 26 m/min SAW DRIVE 400 V / 1,7 / 2.6 kW HYDRAULIC DRIVE 400 V / 0.75 kW PLUS 2 SETS OF LOADING RACK

Condition: ready for operation (used), Year of construction: 2007, total width: 1,070 mm, total height: 1,780 mm, overall weight: 820 kg, product length (max.): 800 mm, Circular Metal Saw manufactured in 2007. This KALTENBACH KKS 400 E features a saw blade diameter of 400 mm and offers infinitely variable feed speed rates up to 1000 mm/min. The machine has a robust weight of 820 kg and dimensions of 800 x 1070 x 1780 mm. If you are looking to get high-quality cutting capabilities, consider the KALTENBACH KKS 400 E machine we have for sale. Contact us for further details. Kodpoy D Srmefx Afdjlr • Saw blade diameter: 400 mm • Saw blade types: HSS solid steel, HSS segmental • Saw blade mounting: DIN 8576 • Centering bore: 50 mm • Number of carrier bolts: 4 pcs • Bolt circle diameter: 80 mm • Diameter of carrier bolts: 13 mm • Feed speed rate: 0–1000 mm/min (infinitely variable) • Quick return: 1550 mm/min • Rotary table adjustment: Manual, +/- 90° • Cutting speed (with 400 mm blade): 10/20, 13/26, or 15/30 m/min • Electric power equipment: 1.7 / 2.6 kW • Operating voltage: 3x 400V / 50Hz • Control voltage: 24V DC • Total current: 9 A • Main fuse: 16 A Additional equipment • Length stop T3/L 41 NC, 6 meters (Year 2013)

Condition: used, Year of construction: 2007, 1 unit KALTENBACH TL450 mitre saw with 2 roller conveyors, each approx. 200x47x120 cm. Colour: as shown, according to pictures and inspection. Year of manufacture: 2007. Condition: used. Storage location: warehouse hall. Kjdsy D Ncijpfx Afdslr Payment method: advance payment via bank transfer. Shipping: collection in person only from location Ditzingen-Heimerdingen.

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 117004, total length: 7,500 mm, total width: 1,200 mm, total height: 2,000 mm, overall weight: 2,500 kg, KALTENBACH SKL 400 H Cold Circular Sawing Machine (completely overhauled) - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 20 A - Saw blade: 400 x 4 x 50 mm Ksdey Dcu Espfx Afdjlr - Saw blade mount: 50/4 x 14/80 mm - Working range, round material 90/45°: 130 mm - Square material 90°: 120 mm - Profiles 90°: 300 x 45 mm - Profiles horizontal 45°: 220 x 60 mm - Profiles vertical 45°: 80 x 120 mm - Saw motor: 3.7 / 4.5 kW - Cutting speed: 1750 / 3500 m/min - Saw blade feed: 0 - 3700 mm/min - Saw blade rapid return: 4500 mm/min Additional equipment: - Workpiece clamping with short stroke vise: stroke 8 mm - With hand crank for presetting - Machine overhauled and newly painted - Horizontal clamping cylinder front, each - Minimum quantity lubrication instead of coolant spray system - T3 feeder roller conveyor with rollers 60 x 289 mm - One starter section: 2000 mm, with 5 rollers, one support leg, one mounting angle - One extension section: 2000 mm, with 4 rollers, one support leg, one stop roller, adjustable as a guide for material bars - Length measuring device including T3 discharge roller conveyor Note: The item must be collected by binding appointment between 07 and 09 July 2026 (exact date to be agreed). FCA D-71263 Weil der Stadt – loaded onto truck

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 313026, saw blade diameter: 450 mm, total length: 10,000 mm, total height: 2,000 mm, total width: 1,200 mm, overall weight: 2,000 kg, KALTENBACH SKL 450 H Semi-automatic Cold Circular Saw Kedpfx Afjy Dcr Dedolr - Operating voltage: 3 x 400 V - Frequency: 50 Hz - incl. roller conveyors Attention: The item must be collected on a binding date between 07 and 09 July 2026, to be agreed upon. FCA D-71263 Weil der Stadt – loaded onto truck

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 119349, saw blade diameter: 450 mm, total length: 12,000 mm, total height: 2,000 mm, total width: 1,200 mm, overall weight: 1,500 kg, KALTENBACH SKL 450 H Cold Circular Saw (completely overhauled) - Saw blade diameter: 400/450 mm - Saw blade mounting: 50/4 x 14/80 - Working range, round material 90°: 135/160 mm - Square 90°: 125/145 mm - Profiles 90°: 300 x 40 mm / 320 x 50 mm - Profiles horizontal 45°: 220 x 60 mm / 250 x 40 mm - Profiles vertical 45°: 60 x 130 mm / 100 x 150 mm - Saw motor: 3.7 / 4.7 kW - Cutting speed: 1950 / 3900 m/min - Infeed roller conveyor T3, outfeed roller conveyor T3 with length measuring system L45E, one starter section: 2000 mm, horizontal clamping system SKL 450 Kljdpfx Aoy Dcrwefder Note: The machine has been completely overhauled! Note: The item must be definitively collected between 07 and 09 July 2026, on a date to be agreed. FCA D-71263 Weil der Stadt - loaded onto truck

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: MV-117894/D, saw blade diameter: 400 mm, total length: 8,000 mm, total height: 1,900 mm, total width: 1,000 mm, overall weight: 1,000 kg, KALTENBACH SKL 400 EC-H cold circular saw automatic (completely overhauled) - Max. cutting width: 4 mm - Saw blade arbor bore: 50 mm - Number of mounting bolts: 4 pcs - Bolt circle diameter: 80 mm - Saw blade feed rate: 0 - 3000 mm/min Ksdpfxsy Dcqye Afdjlr - Rapid return: 4500 mm/min - Adjustable travel of workpiece stop: 70 mm behind and 40 mm in front of the biometric zero point = 110 mm - Stepless manual rotary table adjustment: 90° This is a completely overhauled machine. Specification: Dosing system MS-2 C, infeed roller conveyor T3: 4 m, infeed roller conveyor T3, outfeed roller conveyor T3 with L45D length measuring device Note: This item must be collected on a binding date between July 7th and July 9th, 2026 (exact date to be coordinated). FCA D-71263 Weil der Stadt - loaded onto truck

Condition: excellent (used), saw blade diameter 400 mm cutting diameter 130 mm Klodpfx Afjy Aytvoder stroke 150 mm mitter cutting - all-position +90°/-90° ° cutting speed 10/20 m/min voltage 400 V feed speeds infinitely variable 0 - 1000 mm/min total power requirement 3,4 kW weight of the machine ca. 840 kg dimensions of the machine ca. 1,10 x 0,9 x 1,50 m

Year of construction: 2015, condition: ready for operation (used), Saw blade diameter: 400mm, miter range: +/-90°, max. round material cutting capacity: 130mm, max. square material cutting capacity: 120mm, max. flat material cutting capacity: 305mm/20mm, machine dimensions X/Y/Z: approx. 1050mm/900mm/1850mm, weight: approx. 850kg, on-site inspection is possible. Kedpjy Ax Urjfx Afdelr

Condition: good (used), Year of construction: 1998, machine/vehicle number: 119878, Offer 26098 Technical Data: - Saw blade diameter up to 400 mm - Cutting capacity at 90°: • Round: 130 mm • Square: 120 mm • Flat: 305 x 40 mm or 240 x 85 mm Kjdpfxsy At D Is Afdjlr - Miter adjustable left & right: 0° – 90° - At 45°: • Round: 130 mm • Flat: 245 x 30 mm or 180 x 70 mm - Infinitely variable saw blade feed rate: 0 – 10 m/min - Saw blade cutting speed: 13 / 26 m/min - Saw drive: 400 V / 1.7 / 2.6 kW - Hydraulic drive: 400 V / 0.75 kW - Hydraulic material vice, steplessly adjustable clamping pressure - Handwheel for fine adjustment - Adjustable material stop - Coolant system - Discharge roller conveyor with length stop: 5000 mm - Infeed roller conveyor: 4000 mm - Space requirement: approx. W 800 x H 1770 x D 1020 mm - Weight: approx. 950 kg

Condition: as good as new (ex-display), functionality: not functional, Vertical drilling machine with feed gripper system for material positioning. WITHOUT control system and therefore not operational. Control cabinet is available but partially incomplete. Operating manual and circuit diagrams are available. WORKING RANGE Round material: 20 mm – 150 mm Square material: 20 mm – 140 mm Flat material (width): 20 mm – 240 mm Flat material (height): 5 mm – 140 mm Kedpfxjy At Iyj Afdolr DRILLING UNIT Vertical from above Min. drilling diameter: 6 mm Max. drilling diameter: 25 mm Tools: HSS drills only Spindle speeds: 380 rpm – 1,600 rpm Rapid traverse/return: max. 11,000 mm/min Drilling feed: 10 – 1,500 mm/min Drill slide positioning: max. 17,000 mm/min DRIVE POWER Frequency controlled (87 Hz characteristic curve): 2.6 kW MANUAL TOOL CHANGE Quick-change tool holder: MK3 WORKPIECE CLAMPING Horizontal: max. 5.6 kN FEED GRIPPER Stroke length: 670 mm Feed speed: 6 – 60 m/min Return speed: 60 m/min AIR CONSUMPTION Approx. 300 l/min MACHINE DIMENSIONS (L x W x H): approx. 1,610 x 1,120 x 2,400 mm WORKING HEIGHT above floor: 1,040 mm WEIGHT Machine without accessories: approx. 1,600 kg COMPRESSED AIR CONNECTION Customer side (for air cooling system): 6 – 8 bar

Condition: excellent (used), 3HAC025338-002 Main Servo Drive Unit , DSQC 617 D6_2E2C2B,20% discount at order more then 1 unit. Kodpfx Afsyl Av Dsdjlr DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: good (used), Kaltenbach cold circular saw KKS Maschnr.6995Saegeblatt Ø 350 mm-speed 130 m/min-weight total 1200 kg Klsdpfxed Tp Nlj Afdor

Condition: used, Kaltenbach KKS 400 Technical Specifications Saw blade diameter: 370 mm Cutting diameter: 115 mm Stroke: - mm Cutting area at 90 degrees, flat: 300 x 35 mm Cutting speed: 11 / 15 / 22 m/min Total power requirement: 1.4 kW Machine weight approx.: 850 kg Space requirement approx.: 1100 x 1100 x 1600 mm Kjdpfx Asxhdvvefdslr

Year of construction: 1970, condition: used, Metal circular saw KKS 350 Ksdpfx Afshrzahodjlr Blade diameter 350 mm

Condition: good (used), saw blade diameter: 400 mm, – Double miter Kedpfx Afsim Ezgodjlr – Mist lubrication system – Protective cap – 400V

Condition: used, Year of construction: 2002, HMB MIKOLOW Flexo Méretek: hosszúság: 2400mm A nagy henger kerülete: 1425mm A két festőhengert mi újítottuk fel! Klsdpfjy Drt Dox Afdor A gép tökéletesen működik.

Condition: used, Year of construction: 1972, 1 used, well-preserved hydro-pneumatic semi-automatic cold circular sawing machine for cutting aluminum, non-ferrous metals, wood and plastic Technical data: max. saw blade diameter 370 mm Cutting diameter 120 mm Cutting range at 90 degrees: flat 260 x 60 mm Cutting range at 90 degrees: square 105 mm Cutting range at 45 degrees: flat 200 x 45 mm Cutting range at 45 degrees: square 90 mm 0° cut - longitudinal cut: yes 2 speeds 1500 / 3000 m/min Drive cable 1.7 / 2.6 kW Machine dimensions L x W x H 1000 x 1000 x 1700 mm Machine weight 700 kg Accessories / Special features: - Semi-automatic operation: After starting, the workpiece is automatically clamped with the upper clamping cylinder. Once the set feed end has been reached, the saw blade moves down automatically and the clamping vice is released. - Stepless feed - Pole-changing motor - 1 saw blade - Mitre cut on both sides - Longitudinal cut 0° - Spray lever device Kodebwl Emopfx Afdslr Special accessories: - 1 roller table right with heavy stop 3500 mm and scale - 1 roller table left, approx. 3500 mm Special accessory price: € 1,500.00 plus VAT. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2002, functionality: fully functional, cutting height (max.): 300 mm, cutting width (max.): 360 mm, overall weight: 780 kg, table height: 300 mm, cutting range round steel at 45°: 265 mm, cutting range round steel at 90°: 303 mm, cutting speed: 90 mm/min, Sawcapacity at 90 degree: Round: Ø303 mm Square WxH: 360 x 305 mm Sawcapacity at 45 degree: Round: Ø265 mm Square WxH: 265 x 300 mm Sawcapacity at 30 degree: Round: Ø175 mm Square WxH: 175 x 300 mm Sawingspeed: 20 - 90 m/min. Sawbelt dimensions: 3830 x 25 x 0,9 mm / 3850 x 27 x 0,9 mm Workingheight: 700 mm Featured with: - Mitre sawing - Half automatic - Materialrollerconveyor ca. 8 meter - Machine manuals Country of origin: Germany Motor power: 1,1 kW Machine LxWxH: 2200 x 1250 x 1650 mm Machine weight: 780 kg Kodjyac Uispfx Afdslr