Used Ott Atlantic for sale (1,235)

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, ASSEMBLY UNIT PROGRAMMABLE ASSEMBLY FENCE 0-5MM AUTOMATIC MAGAZINE FOR EDGE BANDING ROLLS AUTOMATIC MAGAZINE FOR SOLID EDGES CUT-OFF KNIFE FOR EDGE BANDING ROLLS PROGRAMMABLE PRESSURE ZONE WITH 1 PRE-PRESSURE AND 5 POST-PRESSURE ROLLERS GLUING UNIT, FLUSHABLE FOR PU ADHESIVE LINEAR CUTTING UNIT, SWIVELABLE FLUSH MILLING UNIT 2X1.9 KW Todpfx Afjv I Saysweb RADIUS MILLING UNIT RADIUS SCRAPER COPY MILLING UNIT WITH 2 MOTORS SURFACE SCRAPERS TOUCHSCREEN CONTROL PANEL EDGE THICKNESS UP TO 20MM MACHINE LENGTH 7.90 M

Condition: used, Year of construction: 1991, The machine has been in operation. The glue tank was overhauled approximately 2 years ago. The pressure rollers should be replaced. The units can be used well as spare parts. Used Manufacturer: Ott Type: Kantomat K 5 Year of manufacture: 1991 Machine no.: K 5200 Granule quick-heating tank Feed rate m/min: 12 / 18 Solid edges up to mm: Edge banding from roll up to mm: 3 Swiveling edge banding unit: Type K 14 Flush trimming Flush radius trimming Radius drawing blade controlled Edge buffing, oscillating Tedezkl H Uopfx Afwob Automatic edge magazine Large roll support Edge thickness mm: Workpiece height mm min / max: 10 - 60 Workpiece width mm min: 60 Workpiece length mm min: 160 Exhaust connection mm: 160 Space requirement approx. L x W x H mm: 5400x1100x1400 Weight approx. kg: 1800 Total connected load kW: Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without guarantee or warranty.

Condition: used, Year of construction: 2007, Heating plate press Manufacturer: OTT Type: Solid 16-32 Year of manufacture: 2007 Technical data Todszuzxnopfx Afwsb Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Ott hydraulic veneer press In top condition Pressing area: 3000 x 1350 mm Tsdpezfqzysfx Afwsb Water-heated veneer press Test run possible at any time.

Condition: used, Year of construction: 2000, Edge banding machine, single-sided Manufacturer: OTT Type: Pacific V 6-F Year of manufacture: 2000 Technical data: Edge thickness: 0.2 - 6 mm Workpiece thickness: 8 - 42 mm Workpiece width: min. 70 mm Workpiece length: min. 0 mm Feed speed: 12 m/min Electrical connection: 3 x 400 V, 50 Hz Extraction: 2 x 120 mm at 20 m/s Extraction capacity: m³/h Equipment, processing units: Edge trimming 2 x 1.5 kW, 12,000 rpm, 200 Hz two tool-controlled spindles Gluing unit Rapid heating tank with Melt-matic automatic edge magazine with optical monitoring for strip edges in fixed lengths Release agent spraying device Cutting unit 2 x 0.2 kW, 12,000 rpm, 200 Hz automatic pivoting 0 / 3 Flush trimming unit x 0.43 kW, 12,000 rpm, 200 Hz Radius trimming unit R2 - R5 2 x 0.3 kW, 12,000 rpm, 200 Hz 2 quick-change stations for trimming units Corner rounding trimming unit 2 x 0.3 kW, 12,000 rpm, 200 Hz Scraper blade 2 x carbide scrapers Tsdpfx Afezuyh Uewob Smoothing unit 2 x 0.2 kW, 2,800 rpm, 50 Hz Weight: 2,000 kg Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2005, sheet width 3050 mm plate thickness 12.0 mm ST plate thickness 8.0 mm VA no. of strokes 7 - 14 Hub/min down holder 18 Stück cutting angle 0.5 - 3.0 ° work height max. 930 mm back stop - adjustable 1000 mm Control SP 8 total power requirement 22.5 kW Tedpfx Aozr Rqnofwsb weight 8500 kg range L-W-H 4180 x 2030 x 2210 mm from a maintenance workshop good / well-maintained condition (!!) Equipment: - electro-hydraulic guillotine shear with guided blade beam - includes HACO NC control system "SP 9" * in like-new condition * backgauge pre-selection positioning * digital display of actual value * electro-hydraulic cutting angle adjustment with digital display * emergency stop switch - NC motorized backgauge on recirculating ball screws - manual blade gap adjustment, adjustable from the rear - front finger guard - 1x side gauge ... 1,000 mm - rear sheet metal chute - 1x movable foot pedal - operating manual

Condition: excellent (used), Catalog number: 7549 TECHNICAL DATA max. width of workpiece 1100mm max. height of workpiece 170mm 2 units: 1) grooved rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above: metal roller, slip unit metal roller, slip unit with shoe metal output roller, slip – from below: conveyor belt pneumatic belt oscillation electric table lifting 2 types of feed speed motor 11kW with pneumatic brake working pressure 6-8bar diameter of extraction nozzle 2x150mm overall dimensions L/W/H 1960x1700x2000mm weight approx. 2000kg – made in Germany – 2 units – unpainted – used sander, very good condition Net price: 31900 PLN Tsdpezty Rtefx Afweb Net price: 7595 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to higher fluctuations)

Condition: used, Year of construction: 1982, Pressing area: 2200mm x 1100mm Opening: 400mm Heating: electric Platen surface: aluminum Emergency stop: yes, pull-cord Pressing force: 60 tons Number of cylinders: 4 Power consumption: 16kW Todpszhm Dvjfx Afwsb Machine length: 2500 mm Machine width: 1300mm Weight: 3000kg

Condition: excellent (used), Year of construction: 1996, I sell the widebelt sanding machine OTT MEGA TR11, year 1996. Configuration: Hard rubber calibrationcylinder Combi unit rubber cylinder + pneumatic jumping pad with segment control. Working width 1100mm Elektronic working height adjustment with digital readout 3-160mm 1 Motor 11kW 2 Feeding speeds. Sensitive adjustment of pad position. Pneumatic adjustment of pad and cylinders pressure position. Todpfx Afeywrzbowsb Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: used, Year of construction: 1996, Continuous press Manufacturer: OTT Type: 300-K-D0 Tedpfxozuzwws Afwsb Year of manufacture: 1996 Technical data Plate dimensions: 2550 x 1350 mm Hot water heating 6 pressure cylinders Total pressing force: 135 t Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Storage location: Nattheim Todpevvkfqefx Afwsb

Condition: excellent (used), Catalog number: 7808 TECHNICAL DATA max. width of the processed workpiece: 1100 mm max. height of the processed workpiece: 160 mm 2 units: 1) ribbed rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above 2 metal rollers, sliding units cleaning brush Tedpoztambjfx Afwjb – from below conveyor belt pneumatic belt oscillation with photocells electric table lifting 2 feed speed types, 1.1 kW motor: 15 kW with pneumatic brake additional pneumatic shoe operating pressure: 6-8 bar diameter of the dust extraction nozzle: 2x160 mm, 1x120 mm overall dimensions L/W/H: 2700x2100x2200 mm weight approx.: 3000 kg – German production – 2 units – additional pneumatic shoe – unpainted – used grinder, very good condition Net price: 32,900 PLN Net price: 7,833 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Tsdpfsxgpaqsx Afweb Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg

Condition: used, OTT MEGAtronic 11 Lacquer Wide-Belt Calibration and Fine Sanding Machine 1st sanding unit: calibration roller, diameter 150 mm, 90° Shore 2nd sanding unit: electronically controlled, segmented membrane sanding pad Working width: 1100 mm MEGA – Lacquer sanding package Feed speed steplessly adjustable: 3–15 m/min Motor power, 1st sanding unit: 11 kW Motor power, 2nd sanding unit: 11 kW, with 2nd belt speed of 4.5 m/sec Additional special equipment: Vacuum table Vacuum generator 3 kW Abrasive belt oscillation Rigid sanding shoe for solid wood and frame sanding Tsdpfx Afjzi A R Iewob Machine is WORKSHOP-OVERHAULED, in TOP CONDITION, from a crafts business Available from stock in Lieboch

Condition: good (used), Year of construction: 2002, Edge banding machine with joiner milling cutter. Otherwise, fully equipped. PU adhesive can be used. Tedegmn H Aopfx Afwob

Condition: excellent (used), Hydraulic Veneer Press with Medium Heating Plates Under-piston design Medium heating plates for connection to the hot water system Central control panel with all operating elements Analog temperature display for the heating plates Pressing pressure can be infinitely adjusted via pressure switch two-stage hydraulic pump Rack compensation Main switch Safety pull cord CE marking Pressing area: 2550 x 1350 mm Opening height: approx. 350 mm Number of pressing cylinders: 4 Tjdpfx Aoy Egkgjfwjb Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3,200 kg Note for Used Machines: • Subject to technical changes and prior sale. • All prices quoted are ex-works - free loading! • The machines have been cleaned and functionally tested. • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements must be made in writing. (Inquiries will only be answered upon receipt of your address and telephone number!)

Condition: good (used), Year of construction: 1992, functionality: fully functional, working width: 1,300 mm, Wide belt sanding machine Tsdpfx Aeznb Szjfwob Manufacturer: Ott Model: RSO-1300 Year of manufacture: 1992 Working width: 1300 mm With roller: 15 kW And Sanding shoe: 11 kW + Brush Feed speed: 10 m and 20 m

Year of construction: 1989, condition: ready for operation (used), Capacity: 12mm at 3010mm sheet width, cutting length: 3050mm, max. pressure: 200bar, min./max. cutting angle: 0.5°-3°, number of hold-downs: 18, max. stroke rate: 21strokes/min, squaring arm length: 1000mm, back gauge: 1000mm, working height: 900mm. Dimensions X/Y/Z: approx. 3800mm/1850mm/2030mm, weight: approx. 9000kg. Documentation available. Inspection possible by appointment. Tjdozukrqopfx Afwjb

Condition: used, total length: 3,700 mm, total width: 1,600 mm, total height: 1,700 mm, Colour: Grey Weight: 4.500 kg - Documentation available: Yes - └ Type Documentation: Technical data, User manual - CE certificate present: No - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 7.5 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3050 - Backgauge type: Electric - Backgauge depth [mm]: 750 - Sheet support system: None - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Manual - Table type: Standard table - Transport dimensions: 3700mm x 1600mm x 1700mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tjdpfxoymbhzo Afwjb Lukas van Rossum

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Todolc Ewiepfx Afwjb Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, Ott frezzer st1 psp Nyrenoverad. Pastoreserande, 3fas , vattenkyld. Tsdpfxjxn Tvrj Afwjb

Condition: ready for operation (used), Year of construction: 1994, Ott 2513 Stabil Veneer Press 4 cylinders Pressing area 2500 x 1300 mm Electric heating Tedpox Dzvxefx Afwsb Electric opening and closing Pressing force 90 tons Year of manufacture 1994 Price 7,500.-

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used 3-meter plate shear from Haco Atlantic Type: ATS 3006 Tjdpozi Rl Tofx Afwob Capacity: 3100 x 6 mm Electric back gauge Electric cutting angle adjustment Year of manufacture: 1987

Condition: excellent (used), Working width: 1,360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2,160 x 2,260 x 2,025 mm Weight: approx. 2,200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically controlled (timed) for veneer sanding 3rd unit: Cleaning brush Abrasive belt oscillation with selector switch Feed conveyor oscillation pneumatic Motorized workpiece thickness adjustment with LED display Units equipped with emergency brake device Emergency stop button at infeed Roller table extension at infeed Complete documentation included Note – Used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – loaded on truck! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no warranty or guarantee. Buyers are free to inspect the machines at the site. • Special agreements are only valid in writing. (We will only respond to inquiries that include your address and telephone number!) Tedpfx Aeych Igefwjb

Condition: excellent (used), Year of construction: 2002, pressure 150 t chamfer lenght 3100 mm distance between columns 2600 mm throat 250 mm dayligth 325 mm piston stroke 120 mm table height 875 mm Tsdpfxoyy A H Hs Afwjb ajustment speed 70.0 mm/sec working feed 9.0 mm/sec return speed 60.0 mm/sec pressure 220 bar Control ATL 550 total power requirement 5.6 kW weight 8400 kg range L-W-H 3500 x 1700 x 2240 mm from a maintenance workshop very good / well-maintained condition (!!) Equipment: - simple NC electro-hydraulic press brake * with torsion shaft - ATLANTIC NC control ATL 550 * Positioning of the backgauge (X) * Positioning of the depth adjustment (Y1 Y2) * Possibility of programming different programs * Memory capacity max. 200 programs - max. 400 blocks * Swivel control panel, front left - NC electro-motorized backgauge (X axis) * 2x manually adjustable stop fingers - 1x set of split roe foot upper tools - 1x rotating universal die block - 1x freely movable 2-hand/foot control - Safety guard on the side behind the machine - Operating instructions Circuit diagram