Used Pressure Roller for sale (25,339)

Condition: used, power: 20 kW (27.19 HP), For inquiries regarding the attachment, please contact Mr. Herden (at the telephone number provided). Weber TRC 86 - Compaction Roller - Year of manufacture: 2020 - with radio remote control - 143 operating hours Price: 14,890.00 € net / 17,719.10 € gross Njdpfx Abjznrwhs Rolh Operating weight according to CECE: 1,390 kg Tire width: 854 mm Compaction force: 75 kN Frequency: 32 Hz Amplitude: 1.70 mm Average static line load CECE: 9.80 kg/cm Climbing ability: 50% depending on the ground Working/travel speed: m/min depending on the ground Drive system: hydrostatic, four tires Engine manufacturer/type: Lombardini LDW 1003 Engine type: 3-cylinder diesel, water-cooled Engine power, max.: 19.5 kW / 26.7 hp Engine power at operating speed: 15.6 kW / 21.3 hp at 2600 rpm The machine has a radio remote control. The remote control is charged in the roller. Upon request, we will also provide you with a financing offer. We are the official Westtech sales and service partner. We are the official Gierking GMT sales and service partner. We are the official OilQuick sales and service partner. We are the official Weber MT sales and service partner. We are the official Holp sales and service partner. We are the official DMS sales and service partner. We are the official Seppi M. sales and service partner. We are the official Magni telehandler sales and service partner. We are the official JCB construction machinery sales and service partner. We are the official Mercedes-Benz sales and service partner. We are the official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = Further information = Year of manufacture: 2020 Operating hours: 143 Unladen weight: 1,390 kg Please contact Marius Herden for further information.

Condition: good (used), fuel type: diesel, Year of construction: 2007, operating hours: 719 h, Ammann AV26-2 Vibratory Roller / Road Roller / Tandem Roller 2007 Yanmar Diesel 719 Hours A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex-works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without warranties (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 Nlsde Aaywwjpfx Ab Roh 5391 LR Nuland

Condition: used, Year of construction: 1979, functionality: fully functional, thread length: 77 mm, overall weight: 2,268 kg, workpiece diameter (max.): 8 mm, type of input current: AC, Vibratory Bowl Variable Speed Pulley Njdpsztr Nusfx Ab Relh Used #10 Dies

Condition: used, Year of construction: 2017, operating hours: 494 h, Hamm HD8VV roller, manufactured in 2017, with only 494 operating hours! ----* Manufacturer: Hamm * Type: HD8VV * Year of manufacture: 2017 * Recorded operating hours: 494 * Kubota diesel engine * Operating weight: 1,580 kg * Power: 14.8 kW * Water spray system * First owner * Good condition * Working width: 80 cm * Transport length: approx. 2,295 m * Transport width: approx. 0.938 m * Transport height: approx. 1.58 m * Video available upon request (WhatsApp Erik) * Price: 10,900 euros, net + 19% VAT Nlodpfez Ta Hysx Ab Reh ----For further questions, please call: Erik Kortum: WhatsApp All information without guarantee, errors and prior sale excepted.

Condition: used, Year of construction: 2007, Transnorm accumulation roller conveyor 6300-700-630 RA2074 Make: Transnorm Roller width (RB): 630 mm Nominal/outer width (NB): 700 mm Length: 6300 mm Roller diameter: 50 mm Roller distance: 76 mm Drive motor: SEW Drive Eletrical Data: 380 V, 0,37 kW Nlsdpfon R Uazox Ab Rjh Accumulating space size: 700 mm Height frame: 140 mm including Motor: 300 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Nedpfe Adurwsx Ab Rjlh GENERAL DATA Manufacturer: Schubert Type: WM0/150 Year of manufacture: 1981 Machine no.: 7.20230 Machine type: Straightening machine STRAIGHTENING RANGE Band width: approx. 150 mm ELECTRICAL DATA Operating voltage: 380 V Frequency: 50 Hz Rated current: 16 A MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 600 mm Width: 600 mm Height: 1,000 mm Weight: 150 kg

Condition: good (used), DHI PPCH-G High Pressure Gas Controller/Calibrator 100MPa / 15,000psi With Carry Case Nlsdpfxo Ad D Nle Ab Rsh Pressure control to 100MPa (15,000 psi). AutoRange feature. One of two Q-RPT’s in each controller with 10:1 turndown. Supports external reference pressure transducers. FLASH memory for simple and free embedded software upgrades.

Condition: used, Year of construction: 2008, Transnorm roller curve combination right and left 45°-1200-900-800 IR800 1551 mm RA2232 Make: Transnorm Running direction: Curve combination clockwise/anticlockwise Roller width (RB): 800 mm conical, plastic coating Nominal/outer width (NB): 900 mm Inner radius (IR): 800 mm Center section length: 1200 mm Offset: 1551 mm Frame height: 80 mm Overall height including motor: 450 mm Drive/transmission: Chain Electrical data: 300-500 V, 0.37 kW Gear motor: SEW, R17DT71D4/TH Conveying speed: please contact us Scope of delivery: without supports Njderixi Tjpfx Ab Rjlh Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Length adjustment (longer/shorter) Other roller conveyors/roller curves with chain transmission Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, functionality: fully functional, thread length: 100 mm, overall weight: 4,400 kg, type of input current: AC, metric thread diameter (max.): 8 mm, Equipped with Vibratory Bowl & Helpro Process Monitor Nedpfx Ajzt S Hajb Rjlh

Condition: used, Year of construction: 2002, Budde telescopic roller conveyor 5150-12000-600 RA2081 The two telescopic elements of the telescopic conveyor can be manually extended or retracted using a hand crank. Nodpfer Iiubex Ab Rjlh Attention! ONLY suitable for truck loading Year of manufacture: 2002 Condition: function-tested, used Optical: Signs of use Base part with double supports: 800 mm height Telescopic elements 2 pieces: manually extendable and retractable Telescopic extension/retraction: hand crank on the operating side Accumulation effect: Accumulation with inclination running upwards Technical data: Stationary part Length: 5150, + 6850 mm Extendable parts Roller width: 600 mm Outer width: 850 mm Height 1 transfer: 800 mm, 1020 with crank handle - Loading e.g. via customer conveyor belt Galvanized rollers diameter 50 mm Roller pitch: 80 mm Operation/crank: front side Self-retaining crank Color: Grey Supports: 2 rigid double supports Base plates: 4 base plates with holes Load/m: min. 30 kg Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1998, Caljan telescopic roller conveyor 600-5/6.5 RA2166 Base part with 2 manualy retractable telescopic elements. The telescope can be moved in or out with a crank handle on the take-off side. Attention: ONLY for trucks loading Type: 600-5/6.5 Year of manufacture: 1998 Condition: functionally tested faultless optical: minimal traces of use fixed part with double supports: 400 mm hight Telescope elements 2 pieces: manualy retractable and extendable Telescope extension/retraction: crank handle on operator take-off side Accumulating effect: accumulating with slope Technical data: Staionary part Length: 5000, +6500 mm extention Part Nodpeqz Dt Rofx Ab Rolh Roll width: 600 mm Outside width: 930 mm Height 1 transfer: 400 mm - Feeding e.g. via belt conveyor on customer side Rollers galvanized and plastic: d = 50 mm Roller pitch super narrow: RTLG = 65 mm Protective cover: bottom complete Operation/crank handle: front side Selfholding/selfstopping crank attached light bar Color: red, original color is here for an additional painting Supports: 2 double supports rigid Base plates: 4 base plates with holes load/m: 50 kg Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2007, Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 2400-1300-550 RA1147 Type 356.10 year of construction 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. Brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. Nlsdpsk Aa Ebofx Ab Rjh We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Year of construction: 2016, High-pressure cleaner, hot water high-pressure cleaner -Manufacturer: Ehrle, Hot water high-pressure cleaner -Type: HD 1140 Electronic II -Operating pressure: 30-230 bar -Spray flow rate: 16 l/min / Steam setting: 7 l/min -Hot water output: 30-98°C / Steam setting: 150°C -Power connection: 3/PE/AC/50Hz/400V -Cleaning agent: High-pressure jet application and quantity control -Dimensions: 1200/800/H1000 mm Nsdpez Duf Rjfx Ab Rjlh -Weight: 225 kg

Condition: used, Year of construction: 2005, Dematic roller curve left 90°-500-440 IR795 RA2351 Make: Dematic Running direction: 90° left running Roller width (RB): 440 mm conical, plastic coating Nominal/outer width (NB): 500 mm Inner radius (IR): 795 mm 3x 300-500V Height frame: 132 Height including motor: 275 Gear motor: SEW WF20 DT71D4/Z/MM03/BW1 Conveyor speed: 0.6 m/s Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Nodpfxjvu Ihye Ab Rjlh For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. Njdpfoflpmqjx Ab Rjlh The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: used, Year of construction: 2009, operating hours: 6,787 h, Equipment: all wheel drive, Crushing plant with transport chassis approved for road traffic ----Feed hopper & pre-screening: Hydraulically folding hopper: A 6.5 m³ feed hopper with lockable rear and side walls. The hopper walls can be quickly lowered for transport. * Vibratory feeder (vibrating trough): A robust heavy-duty trough ensures uniform material feed into the crusher. * Grizzly pre-screen: An integrated screen separates fine particles and sand before the crushing chamber, minimizing wear on the crushing jaws and increasing throughput. ----Crushing unit: High-performance jaw crusher: A generous inlet opening of 1,200 x 750 mm. * Hydraulic drive: The crusher is hydraulically driven, allowing for trouble-free starting under load and a reverse crushing function to clear blockages in a material-friendly manner. * Wedge gap adjustment: The stepless hydraulic adjustment of the CSS (closed-side setting) allows for quick adaptation to the desired final grain size. ----Conveyor systems & material separation: Main discharge belt: An extra-long, 1,000 mm wide conveyor belt with a high discharge height. It can be hydraulically lowered for maintenance or transport. * Side discharge belt (bypass): A folding conveyor belt transports the pre-screened fine material (e.g. soil/sand) to the side. * Overband magnet: A powerful permanent magnet above the main belt automatically removes reinforcing steel, bolts and metals from the crushed construction debris. ----Drive & control: Diesel engine: A Caterpillar C-9 diesel engine with 261 kW (355 hp) provides the hydraulic main drive. * Central control panel: Monitors all important machine parameters (oil pressure, engine temperature, belt speeds) and enables control of the core functions. * Remote control: Allows the excavator or wheel loader operator to control the plant directly from the cab (e.g. start/stop the vibratory feeder). ----Maintenance & mobility: SKF central lubrication system: Automatically lubricates the main bearings of the crusher during operation, drastically reducing manual maintenance effort. * Track chassis: A stable chain chassis ensures excellent off-road capability directly at the job site. * Maintenance platforms: All-round walkways with handrails guarantee safe access to the engine and crusher. ----* Crushing chamber (inlet): 1,200 x 750 mm * Engine: Mostly Caterpillar diesel engine (CAT C-9) ----Transport dimensions: * Length: approx. 14.6 m * Width: approx. 2.8 m * Height: approx. 3.3 m ----Equipment: * Vibratory feeder with grizzly screen Nsdpfx Ao Aa Hr Usb Rslh * Overband magnet for the separation of reinforcing steel (construction debris) * generous maintenance platforms and folding hopper corners. * 3-axle transport chassis -----Vehicle number 12571 ----Errors and prior sale excepted

Condition: good (used), Well-maintained Falch Nodpfouvd N Sjx Ab Rolh Trail Jet 15 500 bar 490 operating hours Year of manufacture 2021 Hot water Regularly serviced by Falch Various accessories available as options

Condition: used, Year of construction: 1998, Transnorm roller conveyor 3900-700-655 RA2229 Make: Transnorm Roller width (RB): 655 mm Nominal/outer width (NB): 700 mm Length: 3900 mm Roller diameter: 50 mm Roller distance: 76 mm Drive motor: R17DT71D4/TH Eletrical Data: 380 V, 0,37 kW Height frame: 140 mm including Motor: 300 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Nedpfxorixi Ee Ab Relh For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2016, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (at telephone number). Stabau roller track S1-RGSCH 100 / 8, load capacity / year of manufacture: 2016 / in stock & immediately available / very good condition Price per pair: €2,190.00 net / €2,606.10 gross Load capacity: 8,000 kg Load center of gravity: 1,500 mm Weight: 710 kg (complete set) Overall length: 3,000 mm Overall width: 500 mm Please see the attached images for precise dimensions. We have a very large selection of various attachments in our warehouse, which are immediately available! Mr. Herden (telephone number) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni telescopic handler sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Magni range! Errors and prior sales excepted! Internal ID: 160520 = Further information = Year of manufacture: 2016 Njdsznryiepfx Ab Rslh New: No Suitable for: Machines for loading and unloading Please contact Marius Herden for further information.

Condition: used, Year of construction: 1998, Transnorm roller conveyor 3800-900-855 RA2063 Make: Transnorm Roller width (RB): 855 mm Nominal/outer width (NB): 900 mm Length: 3800 mm Roller diameter: 30 mm Roller distance: 38 mm Drive motor: R32DT71D4 Eletrical Data: 380 V, 0,37 kW Height frame: 140 mm including Motor: 300 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. Njdpsra Hp Usfx Ab Rolh With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Extendable scissor roller conveyor 500x50cm Very universal, adjustable length (scissor construction), possibility of creating a curve. Adjustable height, each wheel has a brake. Dimensions: max. length 5m roller width: 50cm Weight 90kg Nsdpewundmsfx Ab Rslh

Year of construction: 2014, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). Stabau roller slides S1-RGSCH 100 / 8, load capacity / year of manufacture: 2014 / in stock & immediately available / very good condition Price per pair: €2,190.00 net / €2,606.10 gross Load capacity: 8,000 kg Load center: 1,500 mm Weight: 689 kg (complete set) Overall length: 3,000 mm Overall width: 450 mm Please refer to the attached images for precise pocket dimensions. We have a very large selection of various attachments in our warehouse, which are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni telescopic handler sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Magni range for you! Njdeznrvdopfx Ab Rjlh Errors and prior sale excepted! Internal ID: 141072 = Further information = Year of manufacture: 2014 New: No Unladen weight: 689 kg Suitable for: Machines for loading and unloading Please contact Marius Herden for further information.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Technical Data Grinding/Workpiece Diameter: up to approx. 300 mm (partially up to 350 mm) Grinding Length/Stroke: approx. 550 mm (slide travel) Module range (for hobbing cutter resharpening): min. module approx. 0.5 to max. module approx. 25 Number of flutes: typically 1–99 pieces (depending on tool set) Nedpfx Aoxtiunsb Rolh Grinding wheel diameter: approx. 150–300 mm Grinding wheel speed: up to about 2,700 rpm Centre distance (workpiece spindle): typical range 400–800 mm Swivel/Pitch range: e.g. grinding wheel head swivel 0–15° Machine weight and space requirement: approx. 4.2–4.9 t weight; space approx. 3 × 2.6 × 2.3 m Electrical data: operating voltage e.g. 380 V three-phase, control 24 V, auxiliary voltage 220 V

Condition: used, Year of construction: 2007, Gebhardt roller curve conveyor 2 x 90° LINKS 610-500-300 with straight frame RA1210 The Gebhardt wheel curves with straight gear are from 2007 and are in a good (used) condition. It has a central engine of the SEW brand. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Gebhardt Type: 1070.113 Built: 2007 Condition: good (used) Engine: fully functional Angle: 2 x 90° with straight frame Outer width: 610 mm Nlodpok Aa Nbofx Ab Rsh Clamping length: 500 mm Length straight line: 300 mm Rolls Type: G6/50 sliding bearing with conical plastic Molding Power rating: 30 kg/m Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2/1.15 Conveyor speed: 0.35 m/s Weight: 110 kg Scope of delivery: without supports (if necessary please enquiries) Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 1995, Transnorm angled infeed outfeed rejector inlet roller conveyor 45°/90°-600-500 RA2033 Year of manufacture: 1995 discharge angle: 45° + 45° curve Nominal/external width (NB): 600 mm Useful width (NUB): 500 mm Conveyor speed: 0,68 m/s Roller diameter: 50 mm steel + conical plastic coated rollers Drive: SEW gear motor with brake Electrical data: 0,37 kW, 380-480 V center distance: 75 mm Height: 120 mm, 375 with motor Optionally available: Supports Side guide one-sided and both-sided Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. Nodjra Emlopfx Ab Rslh With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics