Used Profile Steel Shears, Hand-Operated for sale (44,799)

Condition: used, Year of construction: 2003, Technical details: throat: 625 mm number of strokes: 34 Hub/min Punching capacity: 95 t stroke: 80 mm flat steel: 480 x 15 / 380 x 20 mm U-H profile: 160 x 90 knife length: 483 mm total power requirement: 7,5 kW weight of the machine ca.: 2,7 t dimension machine xH: 1,4 x 0,8 x 1,8 m hydraulische section steel shear shearing station: -shearing max. 380 x 20mm / 480 x 15mm Hodpju Icl Rofx Amgon -shear cutting max. 120 x 15mm -holder adjustable in length to 750mm -knife cutting edges = upper knife 2-fold and lower knife 4-fold profile station: processing of round and square profiles; U-profiles; double T-beams and unequal angles -angle shearing max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -Profile cutting max. round steel = Ø 50mm; U-H profile = 160 x 90mm; T-profile = 120 x 12mm. Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Operation by foot switch Some accessories available. *

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 70 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Hsdpju Icmhefx Amgsn Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. *

Condition: used, Technical details: throat: 250 mm number of strokes: 42 Hub/min sheet thickness - max.: 13 mm round bar steel: 36 mm square edge steel: 30 mm angle steel: 100 x 10 bei 90° mm flat steel: 100 x 18 mm U-H profile: NP 10 knife length: 230 mm total power requirement: 2,5 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,1 x 1,0 x 1,6 m Hodpfx Aswp Edajmgon Application: Shearing - notching - punching Notching: material thickness = angle 50 x 8mm and rectangle 50 x 50 x 8mm Punching: max. 20 : 15mm, throat 250mm Foot control no longer available on both sides! Accessories various dies and various punches and small punches (see photo) *

Condition: good (used), Hand lever shears, long-blade sheet metal and round steel shears, sheet metal shears -Manufacturer: Peddinghaus sheet metal and round steel shear type 1 BR 5 -Steel sheet: up to 5 mm -Round steel: up to 11 mm -Blade length: 150 mm -Lever arm with: safety spring -Quantity: 1x lever scissors available Hjdpfxefgi Nqo Amgjn -Price: per piece -Dimensions: 275/100/H1180 mm -Weight: 11 kg/pc.

Condition: used, Year of construction: 1973, pressure 28 t distance between columns 510 mm dayligth 380 mm stroke 260 mm Hodpfxov Svc Ts Amgon weight of the machine ca. ca. 750 kg

Condition: used, Pressing force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm at the flat bar shear Foot switch for lift release Quick change device Hjdpfxjlf Trkj Amgon Assortment of tools is included in the price

Condition: used, Stanzkraft: 750 kN (punching force e.g. 30 mm hole in 22 mm material), with search device via foot switch for anchoring Overhang: 320 mm Cuts 450 x 15 mm or 300 x 20 mm on the angle/flat bar shear Support table on the punching side Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Assortment of tools is included in the price Hjdpfx Aer R Auzsmgsn

Condition: used, Stanzkraft: 550 kN (punch force, e.g. 30 m in 16 mm material), with detection/inspection arrangement via foot switch for anchoring Hedpfxjt Expro Amgjn Cuts 350 x 13 mm or 230 mm on the flat bar shear Overhang: 305 mm Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Support table on punching side Assortment of tools is included in the price

Condition: used, Year of construction: 1990, Max. punching force: 600 kN Max. shear force: 800 kN Hedpfx Ajtmyifemgjn Punches 27 mm holes in 16 mm steel Cuts on the flat bar shear up to 400 mm with material thickness of 16 mm steel Hydraulic hold-down on plate shears Large support table on die side with stops Further technical data on request With a range of punches and dies as desired Weight: approx. 2,000 kg

Condition: used, Year of construction: 1990, Max. punching force: 600 kN Max. shear force: 800 kN Punches 27 mm holes in 16 mm steel Hodpfsm T Amuex Amgon Cuts on the flat bar shear up to 400 mm with material thickness of 16 mm steel Hydraulic hold-down device for a sheet metal shear Further technical data on request With a range of punches and dies as desired Weight: approx. 2,000 kg Very good condition

Condition: new, Year of construction: 2024, The machine is equipped with 5 workstations: • Punching station • Flat steel shear • Angle steel shear • Notching station Hodpsy T N Uksfx Amgjn • Bar steel shear (round and square) Technical Data Strokes per minute at 20 mm stroke: 37 /min Throat depth: 500 mm Punching force: 550 kN Hole diameter and thickness up to max.: 40×10 mm or 20x20 mm Flat steel up to max.: 300×15 or 200×20 mm Angle steel 90° up to max.: 130x130x13 mm Angle steel 45° up to max.: 70x70x7 mm Bar steel up to max.: 40 mm Square steel up to max.: 40 mm Notching up to max.: 10 mm

Condition: as good as new (ex-display), Year of construction: 2024, Technical data Hsdpfx Aey T N T Tsmgsn Strokes per minute with 15 mm stroke: 24 /min Punching force: 450 kN Motor power: 2.2 kW Hole diameter and thickness up to max.: 27×13 mm Flat steel up to max.: 300 x10/ 200×13 mm Angle steel 90 degrees up to max.: 80x80x8 mm Angled steel 45 degrees up to max.: 60x60x6 mm Notching up to max.: 7 mm Machine weight: 760 kg

Condition: new, Year of construction: 2026, The machine has 5 workstations: • Punching station • Flat bar shear • Angle bar shear • Notching station • Bar steel shear (round and square) Technical data Strokes per minute with 20 mm stroke: 40 /min Throat depth 500 mm Hjdpsy T N Tyefx Amgon Punching force 800 kN Hole diameter and thickness up to max. 40×14 mm Flat steel up to max. 450×15 or 300×20 mm Angle steel 90 degrees up to max. 152x152x13 mm Angle steel 45 degrees up to max. 70x70x7 mm Bar steel up to max. 45 mm Square steel up to max. 45 mm Notching up to max. 12 mm

Condition: used, Year of construction: 1960, pressure 10 t distance between columns 260 mm dayligth 210 mm table surface area 275 x 260 mm Hjdpfx Amjwl N Sasgen

Condition: used, Adjustment unit with 2 positioning tables featuring hand crank adjustment - made from aluminium system profiles. Linear unit, linear axis, loading unit, linear guide Manufacturer: Custom-built Year of manufacture: 2000 Track length: 3600 mm Travel distance: 2750 mm Table size: 590 x 355 mm Usable table area with index: 470 x 355 mm Tabletop material thickness: 30 mm (steel) Aluminium system profile rail, length: 3600 mm (profile length) Aluminium system profile, cross-section: 80 x 80 mm (base rail for guide) Aluminium system profile rail, cross-section: 123 x 120 mm (front) Height to top of tabletop above floor: 640 mm Height to top of linear guide carriage above floor: 615 mm Height to top of aluminium system profile 80 x 80 mm above floor: 575 mm - Stable and torsion-resistant construction made from aluminium system profiles (80 x 80 mm) and steel feet - For handwheel adjustment, a rack is bolted to the aluminium system profile rail - Hand crank adjustment via gear and rack, individually for each table - Spring-loaded index pin for fixed indexing, unlockable by hand lever Hsdexf Uq Ejpfx Amgsn - Adjustable index plates on the aluminium system profile rail - Standard linear guide width = 28 mm, height = 26 mm Overall dimension L x W x H: 3640 x 900 x 780 mm Weight: 450 kg Good condition

Condition: used, sheet thickness steel (max.): 2 mm, total width: 250 mm, Profiling line Dreistern P3.100 with mobile cut-off unit and accessories Machine bed features: Production direction: right to left Axle distance: 330 mm 48 stations 44 stations can be driven (44 gearboxes) Quick-change plates Mechanical quick-release clamps Coolant piping 1 x 42 kW Baumüller motor 1 x 15 kW Baumüller motor Profiling frame features: Tool width per frame: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Fixed lower shaft (6 pieces with adjustable lower shaft) Axial adjustment Adjustment range of lower/upper shaft: 80 - 170 mm Gearbox features: Worm gear ratio 1:21 Lower/upper shaft gear ratio 1:1 Mobile cut-off unit features: Travel distance: 1900 mm Profile rail guidance Ball screw drive Bosch servo motor Valve block with punching unit Folding table length: 3000 mm Emergency stop Scope of delivery: Machine bed with gearbox support Infeed table Measuring wheel unit, pneumatic Straightening device Strip filter unit 800 liters Hydraulic unit for separator 44 gearboxes 44 profiling frames 2 Baumüller DC motors 66 universal joints The system operated flawlessly in production until it was dismantled at the customer's facility. Control system not included. Strip unwinder and perforation unit are also available from us as used machines. The system can also be easily extended with additional stations. We can support you with the following when reassembling the system: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation Hedpfxey Sm Eqs Amgen

Condition: used, functionality: fully functional, Year of construction: 2016, Flat shear blades, 520 mm long, with four cutting edges, also for shearing angle iron 45° material support table with gauge stops on the flat shear station section shear knife for shearing angle iron 90° as well as rounds and squares quick-change punching attachment up to 39 mm Ø, for punches and dies of the blue series or with universal die block for die no. 3 height-adjustable and swing-away stripper with exchangeable plate square notching attachment Hjdjy Ndt Hepfx Amgon material support table on the notcher station two two-stage foot pedals and electric control elements on the punch station and notcher station hydraulic low pressure spotter for foot operation connecting sockets for external engagement, e. g. via electrical length stop integrated hydraulic power-pack

Condition: used, Year of construction: 2009, gebraucht 2009 9725 prompt, Zwischenverkauf v Spanien 14700 € 1 110 to 300 mm 5 2 40x20 (28x28) mm 80 mm 17 1/min 600x15 (400x20) mm 605 mm 152x152x13 mm 50/50 mm 90x52x13 mm 5 kW 2130 mm 1200 mm 2200 mm 2500 kg 2 foot pedals for independent work at 2 stations Hsdpfx Amjwiq D Ejgjn hydr. drive flat bar shear with hydraulic downholder angle bar shear with minimum deformation by diagonal moving of the blade , with hydraulic downholder round and square bar shear rectangular notching unit punching unit up to diam. 40 mm oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, functionality: fully functional, Year of construction: 1995, machine/vehicle number: 4039, control type: manual, degree of automation: manual, actuation type: manual, punching force: 70 t, overall weight: 2,400 kg, total length: 1,800 mm, total width: 1,300 mm, total height: 2,100 mm, power: 9 kW (12.24 HP), input voltage: 380 V, type of input current: AC, Equipment: CE marking, emergency stop, foot remote control, The machine is in working order. Hodpfx Ajy Twm Uomgsn

Condition: used, Year of construction: 1976, round bar steel 28 mm square edge steel 25 mm L-beam 80 x 8 mm notching cap. mild steel max. 7 mm cutting capacity of the vertical shear 350 kN Punch power 190 kN shear: flat material 100 x 11 mm shear: length of knifes ca. 175 mm Hjdpswm Rmnsfx Amgen total power requirement 1,5 kW weight of the machine ca. 0,5 t dimensions of machine L x W x H 1,0 x 0,5 x 1,5 m

Condition: good (used), functionality: fully functional, Cutting capacity: Round steel: 45 mm Square steel: 40 mm Hedpjy Rl Twjfx Amgjn Flat steel: 16 mm Strokes/min: 52 Power: 4 kW

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 40611 50075013, control type: manual, degree of automation: manual, actuation type: hydraulic, total length: 830 mm, total width: 970 mm, total height: 1,400 mm, input voltage: 380 V, type of input current: three-phase, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, ❇️ Peddinghaus PEDDY – Universal Section Steel Shear & Punching Machine Robust industrial machine | Versatile steel processing | Made in Western Germany ⸻ For sale is a Peddinghaus PEDDY universal metalworking machine, manufactured in Germany. These machines are renowned for their heavy-duty construction, precise mechanics, and long service life – ideal for metalworking shops, fabrication businesses, workshops, or training centers. The machine combines multiple processing steps in one compact design, enabling efficient operation without frequent setup changes. ⸻ ❇️ Features & Applications • Shearing of section and flat steel • Punching holes • Notching / corner cutouts • Machining of various steel profiles (angle, tee, channel, flat stock, etc.) • Industrial-grade mechanical build, no play • Mounted on a rotatable base with locking function ⸻ ❇️ Condition • Very well-maintained, original condition • Fully functional • Typical age-related signs of use, mechanically flawless • Heavy-duty cast and steel construction ⸻ ❇️ Technical Data • Manufacturer: Peddinghaus • Model: PEDDY • Origin: Made in Western Germany • External dimensions:  – Height: approx. 140 cm  – Width: approx. 97 cm  – Depth: approx. 83 cm ⸻ ❇️ Price €1,750 net (plus 19% VAT) ⸻ ❇️ Terms & Conditions • Sale on behalf of customer • Invoice with VAT shown is possible • Location: 72229 Rohrdorf • Loading with overhead crane available on site • Delivery possible at buyer’s expense • Collection preferred ⸻ Hjdpfx Amsy Nb I Isgsn ❇️ Viewing & Enquiries You are welcome to contact me by phone or message – inspection is expressly recommended. ⸻ ⚠️ Please see my other listings for more accessories for window construction, workshops, and metalworking. ‼️ Make sure to check out my other items – it’s worth your while!

Condition: used, Year of construction: 1978, serial number 4412956673057 95 to. ca. Hsdpoy Hl Rbofx Amgen engine output 7,5 kW weight of the machine ca. ca 5 t dimensions of the machine ca. 2,2 × 1,0 × 2,3 m Technical specifications (from the label)Angle steel (L-profile):150 × 15 mm at 90°100 × 14 mm at 45°Flat steel:up to approx. 150 × 16 mmlarger cross-sections up to 340 × 16 mm (depending on function)Beam profiles:U-profiles (UPN): 220I-sections (IPN)

Condition: like new (used), Year of construction: 2012, round bar steel 45 mm square edge steel 45 mm L-beam 120 x120 x 12 mm total power requirement 5,5 kW weight of the machine ca. 1600 kg Hsdpfsy Hxq Iex Amgjn dimensions of the machine ca. 1700 x 950 x 1900 m

Condition: used, functionality: fully functional, Section steel shear and punch type 210/11, 80x8, beam 10 mm, solid material 30 mm, T-section 80x8 Hodpfoy Dh Eiox Amgen