Used Reetec Aquasignal Signal Light for sale (19,169)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,800 kg, maximum load weight: 34,200 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 13,500 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 40 ft with gooseneck tunnel, front extension extended: 1 x 45 ft with long gooseneck tunnel and rear overload The transport of filled tank containers is not permitted. Without rear height adjustment and without folding center supports, transport of containers without a tunnel is not possible. 2 container guides, incl. connection plate for electrical, air and brake connections (connections positioned upwards) Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) 24 tons, 2-speed support legs, single-side operation, with straight lower part, without extension compensation Wedge blocks with holder Todpfx Aji Riwmefwob Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders with anti-splash flaps according to EC Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connection cable EBS, electronic braking system with EBS socket at the front, without connection cable Test connection for brake cylinder pressure placed on the outside of the EBS module Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - Driving stability system Axle load recognition via EBS-CAN bus signal, for display on the display in the driver's cab, the truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the side (Note! with certain towing vehicles, false diagnoses may occur, even if the function is given) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable Operating instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total train length of 16500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Country of registration / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau, 10 years warranty against rust-through Support legs black coated without pallet box paint Note: Archive images!

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 11900715/C, saw blade diameter: 350 mm, feed length X-axis: 180 mm, feed length Z-axis: 170 mm, total length: 2,210 mm, total width: 1,100 mm, total height: 1,550 mm, cutting range round steel at 90°: 120 mm, cutting range round steel at 45°: 120 mm, type of input current: three-phase, rotational speed (min.): 15 rpm, rotational speed (max.): 90 rpm, cutting height (max.): 170 mm, overall weight: 530 kg, saw blade speed: 90 rpm, input voltage: 400 V, cutting range square steel at 45°: 100 mm, cutting range square steel at 90°: 105 mm, saw drive: 2,200 W, cutting diameter: 120 mm, saw blade bore: 32 mm, 2000 MEP Cobra 350AX Automatic Circular Cold Saw – Efficient Metal Cutting for Industrial Production Tsdpswtr Iysfx Afwjb Available now: MEP Cobra 350AX, a robust automatic cut-off circular saw, perfect for industrial metal cutting applications. Manufactured in 2000 and in good working condition, this machine combines manual and automatic operation modes, adjustable cutting settings, and a 350mm blade to deliver consistent, high-quality cuts. 🔧 Key Features: Blade Size: 350 × 32 × 2.5mm Spindle Motor Power: 2.2kW Blade Speeds: 15 / 30 / 45 / 90 rpm Vice Opening: 160mm Clamping Type: Pneumatic Power Supply: 400V / 3 Phase / 50Hz Manual & Automatic Modes: Yes Cutting Depth & Stop Height: Fully adjustable Machine Weight: 530kg Dimensions (L×W×H): 2210 × 1100 × 1550mm 📏 Cutting Capacities: At 0°: Round: 120mm Rectangular: 180 × 170mm Square: 105 × 105mm At 45° Left: Round: 120mm Rectangular: 135 × 60mm Square: 100 × 100mm At 45° Right: Round: 110mm Rectangular: 135 × 60mm Square: 95 × 95mm ⚙️ Ideal Applications: Cutting steel profiles, tubes, bars Suitable for light to medium-duty industrial production Great for fabrication shops, stockholders, and manufacturing plants ✅ Why Choose the MEP Cobra 350AX? Versatile cutting angles and profiles Dual operation mode (automatic/manual) Compact, efficient, and easy to integrate into existing workflows Pneumatic clamping ensures safety and consistency Low investment cost means big savings on a high-value machine MEP Cobra 350AX for sale Used automatic circular saw Cold saw for metal cutting Pneumatic clamping cold saw 350mm circular saw machine Industrial metal cut-off saw MEP saw 2000 model Automatic metal saw Ireland Circular saw for steel profiles 400V industrial cold saw Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), functionality: fully functional, saw blade diameter: 350 mm, Saw motor: 1.5 / 1.8 kW Saw blade size: 350 mm 2 saw blade speeds: 1400 / 2800 rpm Miter angle stepless: ±45° Tjdpfx Aezfn E Asfweb

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 1,000 mm, workpiece weight (max.): 50 kg, type of input current: AC, overall weight: 65 kg, table load: 50 kg, year of last overhaul: 2025, Equipment: documentation/manual, type plate available, We are offering this very well-maintained KEYENCE VL-500 3D line scanner, manufactured in 2021. Manufacturer: KEYENCE Model: VL-500 Todjy U Ngcepfx Afwjb Year of manufacture: 2021 Condition: very good Category ID: 402 Type ID: 1927 Machine type: 3D line scanner Included in the offer: 1 unit of control unit, part no. VL-500 1 unit of 500 mm base, part no. VL-550 1 unit of measuring head, part no. VL-570 1 unit of accessories, including calibration plate, user manuals, part no. VL-A2D 1 unit of cover, part no. VL-C2 1 unit of Win10 PC for VL-500 series, part no. 972337 1 unit of comparative measurement module, part no. VL-H2P 3 units of AC power cables, part no. OP-99031 Condition is very good, as the scanner has rarely been used. Also included: Calibration certificate valid until 2025. If you have any questions or require further information, please send us a message or call us.

Condition: used, Cold circular saw for light metal Saw blade 350 mm ø Cold circular saw for steel, Spontan Saw blade 225 mm ø, pneumatic saw feed, length stop 1,500 mm Cold circular saw for steel, Spontan Saw blade 225 mm ø, hydraulic feed 300 mm Control unit defective Tsdpsyl Nt Njfx Afwjb

Condition: used, Miter saw for aluminum, EISELE, Type LMS II HVG-225 Machine no. 0107, year of manufacture 1980 Cutting range: 90° = 150 x 100 mm 45° = 120 x 100 mm Saw blade diameter: max. 400 mm Miter cut: +/- 45° Saw blade speed: 1700 / 3400 rpm Motor power: 1.4 / 1.9 kW Power supply: 380 volts, 50 Hz Table size in front of the stop angle: 580 x 350 mm - Motor type RF 1.5 / 4 / 2-7 - Saw unit for shifting cut, tiltable 45° to the left - Machine equipped with a saw blade for aluminum, Ø 400 mm - Hose connection for chip extraction, Ø 80 mm - Sturdy metal base Space requirement (L x W x H): 1050 x 1020 x 1700 mm Todpezinzrjfx Afwob Weight: 150 kg In good condition

Condition: used, functionality: fully functional, functionally tested; item originates from the dismantling of equipment at an automotive supplier Tedpfjzmm N Nex Afwjb Manufacturer: Phoenix Contact Type: MCR-S-1-5-UI-SW-DCI Description: Universal signal converter from Phoenix Contact for galvanic isolation, amplification, and conversion of current and voltage signals. Designed for precise signal transmission between the field and control levels in industrial automation systems. Input signal: 0–5 V / 0–20 mA, switchable Output signal: 0–5 V / 0–20 mA, switchable Supply voltage: 24 V DC Accuracy: < 0.1 % Galvanic isolation: 2.5 kV Operating temperature: -20 °C to +60 °C Mounting type: DIN rail (35 mm DIN rail) Connection type: Screw terminals

Condition: good (used), Year of construction: 2016, saw blade diameter: 600 mm, type of input current: three-phase, operating pressure: 8 bar, Industrial aluminum sawing machine that saws automatically, using pneumatic 2-button operation, and where the workpiece is clamped pneumatically on both sides. The clamping is adjustable both horizontally and vertically. Furthermore, this sawing machine is equipped with a mist lubrication system, which improves the sawing process. The saw blade feed is adjustable on this machine. Features: - Automatic sawing motion Tsdszf U Tmjpfx Afwsb - Double pneumatic clamping - Saw blade moves from bottom to top - Solid carbide saw blade - Adjustable sawing speed - Length stop - Lubrication and reduction system - Atomization system - Air gun - Miter sawing - Automatic sawing and manual sawing The machine is installed and delivered assembled. Testing is possible.

Condition: good (used), Year of construction: 2009, functionality: fully functional, saw blade diameter: 500 mm, Equipment: documentation/manual, Technical data and cutting diagram can be downloaded on the right. 730 mm per stroke, limited to 3 repetitions. Saw blades Ø 500 x 4.4 x 30 mm. Cutting only at 90° angle. Maximum cutting length with 3 repetitions: 2180 mm. Tsdpfx Aey D Sywefwob

Condition: good (used), Year of construction: 2018, ASYS TRM 03 Workstation * Dimensions (L × W × H): 1,590 × 800 × 1,055 mm * Transport height: 950 mm (±50 mm) * Weight: 200 kg * PCB size: 70–460 × 50–460 mm Tsdpszivt Nefx Afwsb * PCB thickness: 0.8–4.5 mm * PCB weight: 0–3 kg * Maximum component height: ±40 mm * Power supply: 230 V / 50 Hz * Pneumatic supply: 6 bar (operating pressure 5 bar), oil-free compressed air * Sound pressure level: < 75 dB(A)

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Trilux strip light system from 2016. Model: 7650B LED4000-840 ET with Philips Xitanium ballast 75W. Trilux 07650/II/35/-5LV-2.5mm support profile Incl. Trilux light insert & Trilux LED bulb. IP20, element length 3.1m and 4.75m. Minimum order is 10 elements or 47.5m Support profile for modular strip light system, with 5-conductor through-wiring, sheet steel, galvanized, coated with white polyester resin paint, for 2 lamps 35 W long. With heat-resistant single wires 5 x 2.5mm², 5-pin socket plug pair for quick electrical connection from support profile to support profile and one 5-pin isolating plug top for each lamp length. Made in Germany Tjdpfxsvtf Ube Afwjb In total, 1600 linear metres of this system are available. Simply state the quantity required, the price varies depending on the quantity purchased. Goods are in stock and immediately available. Shipping only possible for orders of 500 linear metres and above at an additional cost!

Condition: good (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 600 mm, cutting range round steel at 90°: 220 mm, For sale: 1 used CNC fully automatic aluminum circular saw incl. suction unit Tjdeuyyhajpfx Afwob Manufacturer: Tronzadoras MG Model: GAA-600 - CNC YEAR OF MANUFACTURE: 2015 TECHNICAL DATA - Cutting range round: 220mm, box: 300 x 90mm, square: 175mm - Drive power 4.1 KW / 400 V / 50 Hz - Speed 3000 rpm. - Cutting speed 55 m/sec. - Blade dimensions 600 x 50 mm - max. cutting height 220 mm - Dimension 2020 x 1510 x 975 mm - Weight 650 kg Machine comes incl. 6m infeed roller conveyor and the appropriate extraction system. The saw can be inspected in our warehouse in 09599 Freiberg.

Condition: used, machine/vehicle number: MY51260317, functionality: fully functional, Agilent Technologies CXA Signal Analyzer 9 kHz - 3 GHz incl. documentation and accessories Tedpexr D Awjfx Afweb

Condition: used, functionality: fully functional, mileage: 270,000 km, power: 102.97 kW (140.00 HP), first registration: 10/2019, fuel type: diesel, empty load weight: 2,760 kg, maximum load weight: 665 kg, overall weight: 3,500 kg, wheelbase: 4,100 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, suspension: parabolic leaf (spring), number of seats: 3, total length: 6,315 mm, total width: 2,190 mm, total height: 3,230 mm, permissible axle load (axle 1): 1,900 kg, permissible axle load (axle 2): 2,240 kg, loading space length: 3,635 mm, Year of construction: 2019, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, car registration, central locking, compressor, cooling unit, cruise control, electric window regulation, electronic stability program (ESP), full service history, onboard computer, power assisted steering, power mirror, soot filter, traction control, This light-duty truck with both freezer and refrigerated compartment in the cargo box is equipped with a new engine installed in our workshop and therefore has 0 km on the clock. Furthermore, the vehicle is in very good mechanical condition, though it has some bodywork damage. The vehicle can be inspected at our premises. Todpfx Afjy Ny Duswsb

Condition: used, Signal towers, signal lights, signal lamp, signal tower, control lamp -Manufacturer: Telemecanique -XVB C21/ XVB C2B6 Tedpeb Rnnmofx Afweb -Number: 4 pieces available -Price: per piece -Dimensions: 80 x 300 mm -Weight: 0.9 kg

Condition: like new (used), functionality: fully functional, Model 2DS: Measurable sheet sizes: 100 - 2000 mm Scale graduation: 1/2 mm Accuracy of reading: 1/2 mm (1/10 mm possible) Tjdjygi A Tspfx Afwjb Angular deviations: 1/2 mm Glare-free built-in illumination: 4 fluorescent tubes (210 Watt) Voltage: 220V - 50 Hz Exterior dimensions in mm: 2120 x 1150 x 220 Weight (ca.): 108 kg

Condition: like new (used), 10 - 30 V DC , 200 mA switchable, with on/off delay Length: 85 mm Diameter: 30 mm Todpfx Afezfghpjwsb Weight: 205 g Condition: like new

Condition: good (used), Signal towers, signal lights, signal lamp, control lamp -Manufacturer: Rittal, signal light SZ 2368.000 -Price: per piece -Number: 2 pieces -Dimension: Ø 70 x 365 mm -Weight: 0.4 kg/piece Tjdpofmm Dajfx Afwjb

Condition: used, empty load weight: 5,700 kg, maximum load weight: 33,300 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 10/2020, next inspection (TÜV): 11/2026, loading space length: 13,600 mm, loading space width: 2,500 mm, loading space height: 3,000 mm, loading space volume: 102 m³, total length: 13,600 mm, suspension: air, tire size: 445/45 19,5, tire condition: 30 %, color: blue, Year of construction: 2020, front tire size: 445/45 19,5, rear tire size: 445/45 19,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 41542 Koegel, S24-1 * Year of construction: 2020 * ABS, Anti-lock Braking System * EBS, electronic braking system * Air suspension * Used tarpaulin * Edscha / sliding roof * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Lashing eyelets in the outer frame (Multilock outer frame) * Pallet stop * Lifting roof, mechanical * Portal door * Air connection, coupling head (red + yellow) * Connection plug, 2x7-pole * Connection plug, 15-pole * Lifting and lowering device * Storage box / toolbox * Inspections: MOT / emissions test valid until 11.2026 * Suspension: Air * Gross vehicle weight: 39,000 kg * Unladen weight: 5,700 kg Todpezwt D Usfx Afwsb * Payload: 33,300 kg * Permissible total weight: 39,000 kg * Tire condition, 1st axle: 20% - 30% - Tire size: 445/45 R19.5 * Tire condition, 2nd axle: 50% - 40% - Tire size: 445/45 R19.5 * Tire condition, 3rd axle: 30% - 30% - Tire size: 445/45 R19.5 * Tire size: 445/45 R19.5 * Internal dimensions: L=13,600 mm, W=2,500 mm, H=3,000 mm * Internal volume*: 102 m² * Pallet spaces: 34 Disclaimer: Subject to changes, prior sale, and errors. More images and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: ready for operation (used), Year of construction: 1992, - Double mitre circular saw ADS type M - 2 saw heads - max. saw length 5000mm Tsdoucuhdepfx Afwob

Condition: used, functionality: fully functional, empty load weight: 5,600 kg, axle configuration: > 3 axles, loading space height: 2,650 mm, Year of construction: 2005, Year 2005 French-style semi-trailer Tilting roof for loading Covered/Uncovered Internal height: 2,650 mm Fixed axles Tsdpfozim Tyex Afwob Unladen weight: 56 tons

Condition: used, Year of construction: 2007, For enquiries regarding the vehicle, Mr. Seidel (by phone) will be happy to assist you. Polyma LA0400185T68W Light Mast Trailer Tjdpjyxadgofx Afwsb Rated output: 18 kVA, 14.4 kW / 26A, operating hours: 6,367 h We are happy to provide you with a leasing or financing offer upon request. Mr. Seidel (phone) is happy to assist you. Further information can be found on our homepage. ... Subject to errors, alterations, and prior sale !!! - = Further information = Unladen weight: 1,660 kg Payload: 40 kg Gross vehicle weight: 1,700 kg Please contact Tobias Ebert for further information.

Condition: good (used), Year of construction: 1998, operating hours: 1,329 h, fuel type: diesel, motor manufacturer: Yanmar, Field of application: Construction Drive: Wheel Empty weight: 3.380 kg Number of owners: 1 Technical condition: good Visual appearance: good Drill equipment: Tank, Control Panel, Steel canopy Production country: NL Please contact Michael Overmeer for more information = Additional options and accessories = Tedeygwfiopfx Afweb - Control Panel - Steel canopy - Tank = Remarks = Atlas-Copco with 1.329 operating hours mounted on a trailer year of construction december 1998 with a hydraulically operated light tower (9 meters), hydraulic support legs and a hydraulic nose wheel. Changes and typographical errors reserved.

Condition: good (used), Signal towers, signal lights, signal lamp, indicator light -Manufacturer: Patlite -Type: LU7-02 08X27P Tsdpfx Afsb Rnm Iswjb -Dimensions: 70 x 650 mm -Weight: 1.2 kg

Condition: excellent (used), TAMAR Type: FEMET_WI_ID071_TAMAR PLMIS Optical Microscope Optical Microscope The TAMAR optical microscope ID071 is used for the optical inspection of samples with a maximum size of approximately 780x650mm2 (substrate size) in the PLG cleanroom. Substrate size: complete substrate size (780x650mm2) Objective: The objective lens focuses the light emanating from the object being observed to create a real image for the viewer. Brightfield mode (BF): Light from the microscope is directed through the objective lens onto the sample. High resolution, low contrast Darkfield mode (DF): Illumination mode for increasing contrast, high contrast for edges and particles. Principle: The center of the incident light beam is blocked, and only peripheral light is directed through the objective lens and strikes the sample from the side. This causes edges and particles to appear bright, while the smooth background appears dark. TAMAR Optical Microscope ID071 Tjdpfx Afszd Sqmoweb X-Y Stage Software Revision 1.0 Condition: used Scope of supply: (autosampler as shown in the picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.