Used Schiess Horiturn 4080 My for sale (780)

Condition: excellent (used), Year of construction: 1987, Carousel lathe SCHIESS FRORIEP - DV DF DZ DKE 1 x set off 4 jaws 410 x 330 x 200 mm MACH-ID 6692 Make: SCHIESS FRORIEP Type: DV DF DZ DKE Year: 1987 Gbjdpezc Iavefx Afusu set off 4 heavy duty jaws for SCHIESS FRORIEP DV DF DZ DKE Jaw width 90 mm Jaw height 75 mm Hole to hole jump 125 mm Length:1200mm Width:800mm Height:400mm Weight:500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1998, SIEMENS Sinumerik 840D control system Technical data: Working range - max. circulation and turning diameter 2,000 mm - Max. turning height 2,000 mm - Face plate diameter 1,600 mm - max. face plate load 11,200 kg - Chisel slide travel (vertical) 1,400 mm Smallest plunger plunge diameter 330 mm ram cross-section 250 x 210 mm - Drive power of the main motor 71 kW - Crossbeam adjustment 1,170 mm - Cross beam support from the center of the face plate to the right 1,170 mm - From the center of the face plate to the left 25 mm Speed of the faceplate: - Number of gear stages 2 - 1 stage 3.15-80 min-1 - 2 stage 12.5-315 min-1 Gjdpfou R Dlkex Afuobu - Hydrostatically guided ram and support Page -2- Feed rate - X and Z 0.1 2000 mm/min - Rapid traverse X and Z 6,000 mm/min - Weight approx. 24,000 kg - Voltage 400 V 50 Hz - Connected load 175 kW - Space requirement L = 10,000 mm W = 6,000 mm H = 5,850 mm Accessories: - 2 chip conveyors - Housing - 2 tool changers each - 1 each for turning tools and - 1 each for driven tools - Cooling system incl. tank and pump - Driven spindle Dimensions: - Weight of the machine 22 to. - Machine dimensions L/W/H approx. 10,000x6,000x 5,800 mm

Condition: used, Year of construction: 2001, turning diameter: 210 mm, spindle bore: 53 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 700 mm, rotational speed (max.): 6,000 rpm, overall weight: 6,500 kg, distance table center to spindle nose: 960 mm, OKUMA OSP-U100L control unit, with TOP AUTOMAZIONI XF370 bar feed system. Workholding and tooling are not included. Godpfx Afezw Nu Nouebu MUST BE PICKED UP BY SEPTEMBER 2026.

Condition: used, Retrofit: 2006 Faceplate diameter: 6000 mm Turning diameter: 6500 mm Turning height: 4000 mm Gbjdsvk Tmgspfx Afusu Support travel vertical: 2000 mm Support travel horizontal: 3250 mm Workpiece weight: approx. 80 tons Machine weight: approx. 220 tons

Condition: used, Year of construction: 1988, functionality: fully functional, The machine is completely overhauled with new electrics, new cabling, incl. new SIEMENS Sinumerik 840D control system Gsdpou R H I Usfx Afujbu Technical data: Working range - max. circulation and turning diameter 2,000 mm - Max. turning height 1,500 mm - Face plate diameter 1,600 mm - max. face plate load 11,200 kg - Chisel slide travel (vertical) 1,000 mm Smallest plunge diameter of the chisel slide 325 mm Chisel slide cross-section 250 x 210 mm - Drive power of the main motor 71 kW - Crossbeam adjustment 1,170 mm - Crossbeam support from center of face plate to the right 1,170 mm - From the center of the faceplate to the left 25 mm - Magazine positions 12 pcs. - Tool changer Speed: - Speeds - faceplate - ram and support hydrostatically guided 2.5-250 min-1 Page -2- Feed rate - X and Z 0.1 1000 mm/min - Rapid traverse X and Z 6 m/min - Weight approx. 22,000 kg - Voltage 400 V 50 Hz - Connected load 175 kW - Space requirement L = 10,000 mm W = 6,000 mm H = 5,850 mm Accessories: - Chip conveyor - Housing - 2 hinged front doors - Cooling system incl. tank and pump Dimensions: - Weight of the machine 22 to. - Machine dimensions L/W/H 10,000 x 6,000 x 5,800 mm

Condition: used, Year of construction: 2013, working width: 4,000 mm, - 8 mowing discs - PTO shaft - Hydraulically pivoting - Hydraulic pressure adjustment for the support - 1000 rpm - Quick-release system for blade changes - Tool box - Very good optical and technical condition Gbsdpfxsz Nbaxs Afuou

Condition: used, Year of construction: 1977, faceplate diameter 2500 mm swing diameter 2700 mm turning height 2000 mm Gedpfeuddpgex Afusbu cross rail - adjustment 1500 mm workpiece weight max. 20.000 kg total power requirement 71 kW Control Siemens Sinumerik 840 Single-column vertical lathe 2000 x 2000mm Retrofit: 1997 Gr. turning diameter: 2700mm Gr. distance f. face plate to bottom of toolholder: 2150mm chisel holder: 2150mm Support swivelling up to 30° Chisel cross-section: 240x240mm small plunging diameter: 300mm Special equipment: Re-moulding, taper turning, thread cutting, constant cutting speed

Condition: used, Technical details: Gsdpez Ig Swefx Afujbu max. turning diameter: 320 mm turning length: 1040 mm control: OSP E 100 L Dialog Fanuc greates pass round over bed: 530 mm standard turning dia.: 350 Max. distance between centres: 1200 mm max. workpiecediameter: 525 mm Traverse X-Axis 1: 500 Traverse X-Axis 2: 350 mm Traverse Y-Axis 1: 160 (+80/-80) mm Traverse Z-Axis 1: 1200 mm Traverse Z-Axis 2: 1200 mm Spindle 1 Power: 22 kW Spindle 1 RPM: 3800 1/min spindle nose: JIS A2-8 spindle bore: 80 mm bar material dia.: 65 mm C-Axis: 0,001° Number of Turrets: 2 Turret No.1 stations / rotary tools: 12/12 Turret 1 tool RPM: 4500 1/min Turret No.2 stations / rotary tools: 12/12 rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 25 m/min total power requirement: 33 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 6,0 x 2,5x 2,3 m High pressure coolant system: INterlit 8/20 bar Accerories Chip conveyor part counter total counter tool setting Signal lamp 3 colors spindle load monitor B Spindle 1 Chuck SMW 300 mm CNC Turning-and Milling Center The Okuma LT 300 MY has 2 turrets, the upper turret has Y-axis with milling function, the lower turret has milling function. It has main- and subspindle. This allows synchronized machining using 2 turrets. There is an Interlit paperfilter/high pressuire system with the machine with coolant cooler. There are 7 identical machines available, all in very good and well maintained condition. *

Condition: excellent (used), Year of construction: 2015, Okuma GENOS L200E-MY CNC Lathe Technical Data Manufacturer: Okuma Model: GENOS L200E-MY Control: OSP-P300L-R Gbjdpfx Ajy R A N Aofusu Voltage: 400 V Phases: 3 P Frequency: 50/60 Hz Connected load: 15.3 kVA Rated current: 25.6 A Short-circuit withstand capacity: 2.5 kA Max. turning diameter: Ø 200 mm Max. turning diameter x length: Ø 200 x 380 mm Swing over bed: Ø 450 mm Swing over cross slide: Ø 300 mm Workpiece weight (single-sided support): 120 kg Spindle diameter: Ø 100 mm Spindle nose: JIS A2-6 Spindle bore: Ø 66 mm Spindle speed range: stepless Spindle speed: 75 to 3000 rpm Number of tool stations: 12 Turret type: Multitasking V12 turret Tool holder, external turning tools: 20 x 20 mm Tool holder, internal turning tools: Ø 32 mm Rotating tool speed: 6000 rpm Travel (Z-axis): 400 mm Travel (X-axis): 165 mm Travel (Y-axis): 80 mm Feed range: 0.001 to 1000 mm/rev Rapid traverse Z-axis: 25000 mm/min Rapid traverse X-axis: 20000 mm/min Rapid traverse Y-axis: 10000 mm/min Tailstock quill diameter: Ø 55 mm Tailstock quill stroke: 80 mm Machine height: 2040 mm Footprint: 2120 x 1750 mm Machine weight: 4800 kg Year of manufacture: 2015 No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Condition: used, faceplate diameter 2500 mm Thickness 240 mm T-slot - distance 175 mm total power requirement . kW weight of the machine ca. . kg dimensions of the machine ca. . m Gjdpoyuqknsfx Afuobu Optional with 4 jaws €3750 With bed from Schiess KZ 250 Optionally, a Schiess KZ 250 drive gear can be purchased for €9,500 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Control: Fagor Faceplate: 5420 mm Turning diameter: 6540 mm Max. turning height: 3500 mm Support (ram) stroke vertical: 1680 mm Support (ram) stroke horizontal: 3250 mm Gsdpevzqm Ejfx Afujbu Workpiece weight: 60 tons Machine weight: 190 tons approx. Hydrostatic faceplate

Condition: used, Year of construction: 2004, Technical details turning diameter 210 mm Godpjzzwmuofx Afusbu turning length 700 mm control Okuma OSP-E 100 L total power requirement 35,7 kVA weight of the machine ca. 7,1 t dimensions of the machine ca. 2660 x 2000 x 2330* mm Additional information CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: 2 x 12 stations Tool holder mount: VDI 30 mm Power of driven tools: 4 kW Total connected load: 35.7 kVA Machine weight: 7100 kg Machine dimensions: 2660 x 2000 x 2330 mm* Plus swarf conveyor and bar loader Accessories FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005 Chip conveyor Coolant system Collet chuck for main and subspindle Both turrets equipped with tool holders Machine documentation.

Condition: used, faceplate diameter 2500 mm Thickness 240 mm T-slot - distance 175 mm total power requirement . kW weight of the machine ca. . kg dimensions of the machine ca. . m Optional with 4 jaws €3750 Gbjdjyuqiqepfx Afueu The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 1987, Carousel lathe SCHIESS FRORIEP - DV DF DZ DKE 1 x set off 4 jaws 410 x 330 x 200 mm MACH-ID 6693 Make: SCHIESS FRORIEP Type: DV DF DZ DKE Year: 1987 set off 4 heavy duty jaws for SCHIESS FRORIEP DV DF DZ DKE Jaw width 90 mm Jaw height 75 mm Hole to hole jump length ways 125 mm Hole to hole jump in width 250 mm Length:1200mm Width:800mm Height:400mm Weight:500kg Godpfozc H Uxox Afusbu Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2026, TECHNICAL DATA: Turning diameter 2000 mm Max. workpiece height 1200 mm Max. workpiece weight 8000 kg Faceplate diameter 1800 mm Faceplate speed range / 4 automatic stages 0-210 rpm Max. faceplate torque 31500 Nm Main drive power 55 kW EQUIPMENT: - 4-position turret or tailstock with 2 Capto clamping units - Central lubrication system SKF/VOGEL - Commissioning including training - 12 months warranty - Complete electrical equipment 230/400 V, 50 Hz, Made in Germany, CE standard OPTIONS: - Steel chucks Gbedpfxof S Hcys Afuou - Tool changing system (10 positions) - Machine enclosure - Chip conveyor - Coolant preparation - Side support - Machine version with tailstock and 2x Capto C6 - ... CONTROL: CNC cycle control Fagor 8037TC/8055TC* or Siemens OTHER: CE Declaration of Conformity Geometrical acceptance test according to DIN 8609-2

Year of construction: 2017, condition: as good as new (ex-display), functionality: fully functional, TECHNICAL DETAILS Gbodpfx Afslk H U Rsusu X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 800 mm Spindle speed: max. 0 - 17,000 rpm Table size: 500 x 500 mm Table load: max. 800 kg Workpiece diameter: max. 800 mm Workpiece height: max. 800 mm Rapid traverse rate: 60 m/min (for X, Y, and Z axes) Control system: Siemens 840DSL Spindle: Kessler Torque: max. 60 / 80 Nm Tool magazine: HSK-A63, 40 tools, ATC MACHINE DETAILS Power: 26 / 35 kW EQUIPMENT - Linear scales - Pallet changer - Chip conveyor

Condition: used, faceplate diameter 2500 mm swing diameter 3200 mm turning height 3100 mm Control R&D type MTC 2x-2 workpiece weight 20000 kg slide adjustment 1600 mm side head - cross travel 1000 mm Refurbished 1996 Many accessories Tool holders Jaws Jaw extensions The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, Gsdpfxoyq Swzo Afuebu please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1990, Control system: Siemens 840-C Faceplate diameter: 1800 mm Gbodpfozadagsx Afueu Swinging diameter: 2000 mm Maximum turning height: 1100 mm (below tool) Table speed: 130 RPM Workpiece weight: 8000 kg Tool changer: 12 positions

Condition: used, turning diameter over bed 3800 mm turning diameter over slide rest 3200 mm turning length 12000 mm faceplate diameter 3100 mm steady 2 bed width 4000 mm turning speeds 200 U/min workpiece weight 90.000 kg Hydrostatik Spindellagerung Hydrostatik Lynette The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Gbsdpfx Afsyqwa Usuju About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1980, SCHIESS HBM Horizontal milling boring machine CNC YOM 1980-2000 X – travel 5900 mm Y – travel 3400 mm Z – travel 1350 mm W—travel 900 mm (together with z or with milling head) Spindle diameter 180 mm Table 2500x2000 mm, load 30 tons, for positioning with new DRO Floor plates for fixation of workpieces Controls CNC NUM with side PC for files uploading Angle head extended ISO 40 Angle head extended ISO 50 Universal angle head ISO 100 Chips conveyor Overall dimensions 13mx11m, floorplates 10 meters, height 2+5 meters, spindle 180 mm Gbsdpjhh Dqhjfx Afuou Total weight of machine 96 tons, can be transported with 5 trucks

Condition: excellent (used), functionality: fully functional, • Muratec MT 25 MYY / Robot Gantry Loader / Bar Loader. • Two C-axes. • Two Y-axes. • Highly automated machine. • 8 kg gantry loader-type robot for part loading and unloading. • 1.5-meter CNC bar loader. • Machine with 9 controlled axes. • Two twin spindles. • Two turrets. • Turrets with 15 positions each, all motorized. • Integrated spindle motor: 15 kW. • Motor starting torque: 420 N·m. • Motorized tool motor: 4 kW. • Spindle size: A2-6. • Maximum machining diameter: 370 mm. • Maximum machining length: 920 mm. • Bar feed: 67 mm. • Prismatic guides on all axes. • Two 250 mm Kitagawa hydraulic chucks on each spindle. • Separate compartment for inspecting machined parts. • Automatic finished-part pickup arm for small parts. • Automatic secondary spindle cleaning with air or coolant. • Conveyor belt for finished parts. • Automatic load control and tool wear monitor. • Part transfer system between spindles with automatic torque control. • Fanuc CNC. • Fanuc motors, servos, electronics, and programming. • Rapid traverse speeds: 20 and 25 m/min. • Main spindle speed: 3,500 rpm. • Motorized tool speed: 3,000 rpm. • Turret indexing time: 0.2 seconds. • Rear hinged chip conveyor. • Complete set of static tool holders for external and internal operations included. • Complete set of motorized axial and radial tool holders included. Gbedpfx Afezuxwueuou • Machine currently in operation. • Weight: 10,800 kg. • Immediate delivery, unless sold prior to listing.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 340 mm, Okuma LU15-MY Year of manufacture: 2001 Commissioned: 2002 Control system: U100L A video of the machine can be viewed on our website. Machine features: Gsdozh Iwkepfx Afuobu ▪ IGF dialog programming ▪ Movable tailstock ▪ Powered tools – 12 stations on the A-turret ▪ C-axis ▪ Y-axis ▪ Touch probe ▪ Preparation for steady rest on the B-turret ▪ Internal chuck ▪ Signal tower ▪ Mayfran chip conveyor Technical details: • Max. turning diameter: 340 mm • Max. turning length: 1000 mm • X-axis travel: upper 260 mm (170+90); lower 140 mm (90+50) • Z-axis travel: upper 1,040 mm; lower 1,015 mm • C-axis travel: 360° • Spindle – number of speed steps: 2 – automatic • Bore diameter: 62 mm • A-turret (upper): 12 tools, all suitable for M-tools, VDI 40 • B-turret (lower): 8 tools, VDI 40 • Rotating tool speed: 45~4500 min -1 • Rapid traverse feed rate: mm/min X: 15,000 Z: 20,000 C: 200 min -1 • Tailstock quill diameter: 90 mm • Tailstock quill stroke: approx. 100-120 mm ▪ Machine dimensions including chip conveyor L x W: approx. 4300 x 2200 mm ▪ Machine height: approx. 2230 mm ▪ Weight: approx. 7900 kg Optional: ▪ Transportation organization and execution ▪ Machine delivery and installation ▪ Machine commissioning

Condition: used, Technical details: faceplate diameter: 1600 mm swing diameter: 1800 mm turning height: 1500 mm max. ram stroke: 1200 mm faceplate turning speed range -stepless-: 2,5 - 250 U/min workpiece weight max.: 10.000 kg ram head dimension: 240 x 240 mm feed range: 1 - 3000 mm/min power capacity: 45 kW weight of the machine ca.: 20 t modernized and overhauled in 2010 with CNC SIEMENS 840 D 12 positions automatic toolchanger telescopic covers splash guarding chip conveyor coolant attachment diverse toolholders * Gsdpfxsv Uw Trs Afuobu

Condition: used, Year of construction: 2001, Technical data: Okuma Space Turn LB 300 MY Gbsdpfx Afequcnbsuou Year of manufacture: 2001 Control: OSP U 100 L Max. Turning length: 340 mm Chuck diameter: 10 inch X-axis: 280 mm Y-axis: 120 mm Z-axis: 500 mm C-axis: 360°(0.0001°) Spindle: 4500 rpm Spindle clearance: 62 mm Weight: 6000 kg Accessories: -Driven tools -Chip conveyor -Transformer -Manuals

Condition: used, Year of construction: 1992, faceplate diameter 1600 mm swing diameter 2000 mm turning height 1600 mm Control Siemens Sinumerik 805 turning speeds 1-250 U/min Table load 12000 kg main drive device 56 Control system manufacturer Siemens type Sinumerik 805 Accessories and cabinets can be purchased optionally The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Gbjdpfx Afsyqtnzeueu About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team