Used Schleicher Levelling/Feeding Line for sale (24,917)

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed Bdodpfxsxf Up Uo Ahmoh - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Year of construction: 2024, condition: new, The UMG-401.17 equipment set is designed for feeding logs with a diameter of 120–600 mm and a length of 2500–3200 mm to woodworking equipment for further processing. This unit includes a Bruks BR1450 log milling machine and a Valan kone VK100 debarker (adapted to birch wood), a Vecoplan VAZ2000 bark shredder. Safe platforms and stairs around the entire equipment unit ensure convenient access during machine maintenance. The Valan kone debarker is protected from environmental influences by a metal frame house. The line throughput before the debarker is 12 pcs/min, after the debarker feeding to the cutting line is 28 pcs/min. Bsdov Uh N Dopfx Ahmodh

Year of construction: 2024, operating hours: 10 h, condition: ready for operation (used), functionality: fully functional, screw conveyor diameter: 145 mm, TECHNICAL DETAILS Throughput (depending on material, bulk density, and recipe): 200 - 300 kg/h Extruder type: Single-screw extruder / melt extruder Screw diameter: 145 mm Heating: Induction heating Heating processing temperature: over 300°C possible MACHINE DETAILS Drive Drive power: 45 kW Voltage: 380 V Frequency: 50 Hz Rated current: 84.2 A Speed: 1,480 rpm Protection class: IP55 Insulation class: F Operating mode: S1 – continuous operation Bdjdpezr Hz Ajfx Ahmeh Sound level: 71 dB(A) Year of drive manufacture: 2022 Star/delta connection possible Suitable plastics: LDPE, HDPE, PP Suitable materials: Ground material, EPS, film scraps, ground film, and light plastic waste Material feed: Suitable for materials with low bulk density Operating hours: 10 h EQUIPMENT Metering device Hopper for material feed Large filter / screen changer Adapted die

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: A-6.3240, Complete 2019 Wienstroth Fixture Heat Treat/Quenching Line. Furnace Temperature Max 880 Deg C, 480kW, Heating Zones: 4, Power Supply Voltage: 460/60 Volts/Hz. Refer to attachments for further equipment specs & drawings. Line to include: High Temperature Furnace w/ Material Conveyers Overhead Crane & Hoist System Quenching Bath w/ Heat Exchanger, Pumps and PLC Washing/Rinsing Station, 2 Zone, TPS & Entrance Conveyer Assembly Transfer Conveyer System, Material Handling Assembly w/ Tracks Bsdpez Hb S Ajfx Ahmjdh Low Temperature Temper Furnace w/ Cooling Conveyer & PLC Quenching Line PLC Controller Power Distribution Cabinets, Rittal/Wienstroth 24x Pallets Quenching Line Tooling

Condition: excellent (used), Year of construction: 2022, Multihead Weigher & Pouch Bag Filling / Sealing Line. Can mix three different products of different weights in the one pouch bag. Consisting of the following. 24 head weigher, sus304, 3-mix, 3 top cones, 100 degree flat chute, 2.5L dimple plate, touchscreen, photo sensor Pouch Machine Change Parts Bodpfx Asvw Egrjhmjdh Gantry with stairs 3 infeed elevators Ice Viper Printer Set of wash walls to suit 2 x Cross feed conveyors All manuals and spare parts included Can be seen running In excellent condition

Condition: like new (used), Chain feed table, used for feeding and linear transportation of roll goods or log goods. Forward/reverse run (reversing circuit) integrated, end positions are queried via roller limit switches. Bodpfetw Sm Nox Ahmsdh Feeding length: 2200mm Feeding height: 950mm (adjustable) Drive power: 0.18kW (Getriebebau Nord) Condition: slight paint wear, otherwise as good as new

Condition: used, clear span: 1,860 mm, total width: 11,720 mm, total height: 2,500 mm, Technical Data for Pallet Racking System: Racking System: Alser Type: NS Setup Specifications: Number of rack rows: 01 pcs Length per rack row: approx. 11,720 mm Number of bays per rack row: 06 pcs of 1,860 mm each Number of levels plus ground level: 02 pcs Volume Specifications: Pallet locations per bay: 06 pcs Pallet locations per row: 36 pcs Total pallet locations: 36 pcs Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Max. pallet weight: approx. 1,000 kg Bdsdpfx Ahex Upqbemjh Scope of delivery includes: 07x pallet racking uprights, used Material color: brown Profile dimension: C80 x 40 x 15 x 2.00 mm Including horizontal and diagonal braces, base plates Uprights are pre-assembled Max. bay load: 4,000 kg At buckle height: 1,250 mm (min. 5 bays per row) (welded truss) 2,500 mm high 1,050 mm deep 24x pallet racking beams, used Material color: orange Profile dimension: S 110 x 55 mm Beam type: B113 Connector: 2 HK Clear width: 1,860 mm Max. load per pair of beams: 2,000 kg, with evenly distributed load 48x safety pins, used Material finish: sendzimir galvanized For securing longitudinal beams against unintentional lifting 28x anchor bolts, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 14x leveling plates, used Material: sendzimir galvanized To level uprights set up on uneven ground 01x load plate with information on bay and shelf loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm General Information about the Item: This item is offered for collection only. Any transportation or shipping of this item is subject to additional costs, which can be provided upon request depending on the delivery location and order volume.

Condition: good (used), clear span: 2,700 mm, total length: 25,200 mm, load capacity: 2,700 kg, shelf height: 2,000 mm, Technical Specifications for Pallet Racking System: Rack System: Dexion Type: P 90 Set-Up Specifications: Number of Rack Rows: 1 unit Length per Rack Row: approx. 25,200 mm Number of Bays per Rack Row: 9 units at 2,700 mm each Number of Beam Levels plus Base Level: 2 units Volume Specifications: Pallet Spaces per Bay: 9 units Pallet Spaces per Rack Row: 81 units Total Pallet Spaces: 81 units Based on: Load Carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total Height incl. Pallet: n.d. Max. Weight per Pallet: 900 kg Scope of Delivery Includes: 10x Pallet Rack Uprights, used Material finish: sendzimir galvanized Type: M Profile dimensions: 90 x 75 x 1.80 mm Incl. horizontal & diagonal bracings, base plates Uprights are pre-assembled (bolted truss construction) 2,000 mm high 1,100 mm deep 36x Pallet Rack Beams, used Material finish: sendzimir galvanized Box profile: 100 x 50 mm Beam type: SLB 100|15 Bracket: 5 HK (hooks) Clear span: 2,700 mm Max. load per pair of beams: 2,700 kg, with evenly distributed load 72x Safety Pins, used Material finish: sendzimir galvanized For securing the beams against accidental lifting Bdedew Il Sgepfx Ahmjh 40x Bolt Anchors, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 20x Shim Plates, used Design: fully galvanized For leveling rack uprights installed on uneven floors 1x Load Capacity Sign With specifications for bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm General Information about the Item: This item is offered for collection only. Any additional transport or shipping of this item is subject to extra costs, which can be quoted separately depending on the place of delivery or scope of delivery.

Condition: good (used), clear span: 3,600 mm, total length: 18,510 mm, shelf height: 1,750 mm, Technical Data for the Pallet Racking System: Racking System: Stow Type: Pal Rack NS Installation Data: Number of rack rows: 1 unit Length per rack row: approx. 18,510 mm Number of bays per rack row: 5 units at 3,600 mm each Number of levels plus ground level: 2 units Volume Data: Pallet locations per bay: 12 units Pallet locations per rack row: 60 units Total pallet locations: 60 units Based on: Load carrier: Euro pallet EN 13698-1 Bdodpfx Aow I Tfnohmeh Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: n.d. Max. weight per pallet: 389.50 kg Scope of supply includes: 06x Pallet rack uprights, used Material color: RAL 5015 sky blue Upright type: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Incl. horizontal and diagonal bracing, foot plates Uprights are pre-assembled (bolted truss design) Height: 1,750 mm Depth: 1,100 mm 20x Pallet rack beams, used Material color: orange Beam type: PNB0472 Box profile: 120 x 50 mm Connector: 4 HK (hooks) Clear span: 3,600 mm Max. load per pair of beams: 1,500 kg, with evenly distributed load 40x Safety pins, used Material finish: Sendzimir galvanized For securing beams against unintentional lifting 24x Wedge anchors, new Manufacturer: Hilti Model designation: HST2 M12x105/10 Material: galvanized carbon steel Approved for: cracked concrete 12x Levelling plates, used Version: fully galvanized For leveling rack uprights installed on uneven floors 01x Load capacity sign Indicating bay & shelf loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm General information: This item is offered for collection only. Any additional transport or shipping requests will incur extra costs, which can be quoted separately depending on the delivery location and scope. Please enquire with us for further details.

Condition: new, Year of construction: 2025, functionality: fully functional, coil outer diameter: 1,500 mm, coil inner diameter: 508 mm, product height (max.): 200 mm, feed length X-axis: 1,520 mm, feed length Y-axis: 3,020 mm, feed length Z-axis: 80 mm, warranty duration: 24 months, total height: 2,380 mm, total length: 8,900 mm, total width: 2,300 mm, load capacity: 1,300 kg, input frequency: 50 Hz, input voltage: 380 V, overall weight: 180 kg, repeat accuracy: 0.02 mm, workpiece weight (max.): 15,000 kg, Equipment: cooling unit, GS-J Series has various workbench sizes such as 3015, 4015, 4020, 6015 to meet different processing needs Suitable for batch processing of thin plates with high flatness requirements of 0.6-3.0mm Uncoiling machine parameters: Bdodpfxev Awguo Ahmoh Maximum weight of coil (kg): 15000 Coil width (mm): 200～1524 Coil outer diameter (mm): Φ800～Φ1500 Coil inner diameter (mm): Φ508mm~Φ610mm (cast iron pad) Coil thickness: (mm) 0.6-2.0mm (stainless steel) ≤1524mm 0.8-3.0mm (carbon steel) ≤1524mm Feeding length (mm): 0～ Maximum stroke of equipment Unwinding speed (m/min): 0～15 Moving speed (mm/s): 0-8 Lifting speed (mm/s): 3.0 Lifting stroke (mm) : 350 Leveling flatness (mm/㎡): ≤±3 Fixed feeding line height (mm) : 870 Sizing accuracy (mm/m) : Length direction ≤±0.2 Diagonal direction : ≤±0.8 Revolutionize Your Coil Processing with One Machine, Five Functions! Uncoiling, leveling, feeding, cutting, and blanking – all in one seamless automated system for maximum efficiency. Smart, Flexible & Versatile - Effortlessly cuts special-shaped workpieces, adapting to diverse production needs - Optional touchscreen control with top-tier international cutting systems - High-quality drag chain cables – durable, bend-resistant, and interference-free

Condition: good (used), clear span: 1,450 mm, total length: 7,760 mm, shelf height: 1,750 mm, Technical details for the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical setup data: Number of rack rows: 01 pc. Length per rack row: approx. 7,760 mm Number of bays per rack row: 05 pcs. at 1,450 mm each Number of levels plus ground level: 02 pcs. Currently in stock: approx. 2 sets! Scope of delivery includes: 06x pallet rack frames, used Material color: RAL 5015 sky blue Frame type: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Including horizontal and diagonal braces, base plates Frames are pre-assembled (bolted construction) 1,750 mm high 1,100 mm deep 20x pallet rack beams, used Material color: orange Beam type: PNBH0443/1.5 Box profile: 130 x 50 mm Connector: 4 hooks Design: box end beam Clear width: 1,450 mm 40x locking pins, used Material color: sendzimir galvanized For securing the beams against accidental lifting 24x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: carbon steel, galvanized Approved for: cracked concrete 12x leveling shims, used Design: fully galvanized For leveling rack frames installed on uneven floors Bdedpfxew I Sx To Ahmjh 01x load plate With information on bay and compartment loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only offered for collection. Any requested transportation or shipping of this item is associated with additional costs, which can be provided upon request depending on the delivery location and scope.

Condition: excellent (used), shelf length: 5,270 mm, shelf height: 2,278 mm, Technical data for the shelving rack: Racking system: SSI Schäfer Type: R 3000 Technical data for installation: Number of rack rows: 01 unit Rack length: approx. 5,270 mm Number of bays per rack row: 04 units @ 1,280 mm each Number of levels plus ground level: 06 units Scope of delivery includes: Bdjdpsw H N S Nsfx Ahmeh 05x Upright frames, new Material finish: sendzimir galvanized Frame profile dimensions: 31 x 60 mm Incl. bracing and base plates Uprights pre-assembled Height: 2,278 mm Depth: 800 mm 24x Shelf panels, used Material finish: sendzimir galvanized Dimensions: 1,280 x 775 x 40 mm Weight per unit: approx. 11.68 kg 02x Cross bracing, used Designation: KV31313 Material finish: sendzimir galvanized 01x Load sign Showing compartment & bay loads, manufacturer, and order number Dimensions: 297 x 210 x 2 mm General information on the item: This item is available for collection only. Any additional transport or shipping of this item will incur extra charges, which can be provided separately depending on the delivery destination and the scope of delivery.

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Extruder Granulator Bedpfx Ahjzylxismjdh Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: good (used), shelf length: 3,960 mm, shelf height: 2,278 mm, Technical data for the shelving rack: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of rack rows: 01 pc. Rack length: approx. 3,960 mm Number of bays per rack row: 03 pcs. at 1,280 mm each Number of levels incl. base level: 06 pcs. Included in the scope of delivery: 04x Rack uprights, new Material finish: Sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. bracing beams and base plates Uprights are pre-assembled Bedew H Rb Eopfx Ahmodh Height: 2,278 mm Depth: 800 mm 18x Shelves, used Material finish: Sendzimir galvanized Dimensions: 1,280 x 775 x 40 mm Weight per unit: approx. 11.68 kg 01x Cross brace, used Designation: KV31313 Material finish: Sendzimir galvanized 01x Load sign with field and shelf load specifications, manufacturer, and commission number Dimensions: 297 x 210 x 2 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item is subject to extra charges, which can be individually requested from us depending on delivery location and scope.

Condition: used, Year of construction: 1987, material width 800 mm material thickness 0,4 - 2,5 mm no. of straightening rolls 8 straightening roll diameter 53 mm number of draw-in rolls 2 diameter of draw-in rolls 160 mm material thickness at 800 mm material width (Niro) 0,6 mm material thickness at 800 mm material width (steel 1,0 mm material thickness at 150 mm material width (Niro) 2,5 mm material cross-cut 975 mm² speed - 35 m/min power requirement 2,1 kW Bdedpfx Ajzrpufjhmoh weight 7,0 t dimensions (WxDxH) 2,0 x 2,0 x 2,3 m Straightening machine RM 8-53/160-800 with infinitely varibale drive, motoric driven straightening rolls, supporting rolls, hydraulic lifting of the roller cassette, motorized adjustment of the rolls, hydraulic threading wedge, side guidance at the inlet

Condition: used, Industrial Bowl Feeder and Linear Feeder, Lysta Vibrator, Used machine Manufacturer: Lysta Vibrator (Albertslund, Denmark) Type (Vibratory Bowl Feeder): D 600/750 (Serial number: 1874) Type (Linear Vibratory Feeder): 400 x 75 (Serial number: 472) Condition: Used, industrial execution Overall dimensions: 710 x 1360 x 1450 mm Technical and operating parameters: Bowl diameter: 450 – 750 mm Linear track size: 200 x 700 mm Electrical data (Bowl Feeder): 220 V / 230 V, 1 phase, 50 Hz, 3.5 A Electrical data (Linear Feeder): 220 V / 230 V, 1 phase, 50 Hz, 0.3 A Design / Operation: Electromagnetic orientation and feeding system with rotary bowl drive and linear transfer track. Bjdpfx Aezwdzdehmsdh Suitable Application Areas: This high-precision Danish vibratory feeding system is perfectly designed for automated sorting, orientation, and feeding of small components: Assembly lines and automated cells: Feeding fasteners (screws, nuts, washers), plastic parts, or electronic components in correct orientation to assembly machines or robotic workstations. Packaging systems: Controlled, continuous, or counted feeding of small products into packaging machines. Plastics and metal processing: Orienting and singulating bulk mass components for machining, inspection, or sorting stations.

Condition: new, Year of construction: 2026, functionality: fully functional, coil weight: 10,000 kg, number of straightening rollers: 6, conveyor belt width: 1,500 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 3 mm, blade shaft diameter: 255 mm, sheet thickness copper (max.): 3 mm, inner diameter: 510 mm, outer diameter: 1,500 mm, mandrel diameter: 510 mm, mandrel length: 1,500 mm, coil width: 1,500 mm, coil outer diameter: 1,500 mm, number of blades: 8, warranty duration: 12 months, straightening roller diameter: 140 mm, total width: 1,500 mm, Slitting line model 1,500 x 3 mm, comprising: - Decoiler Aspo mod. 1500/5Ton (customizable) - Loading table - Feeder and straightener with 6 rollers, diameter 140 mm - Rotary cutter with 4 pairs of circular blades - Automatic punching unit with 20 customized punching stations - Mechanical shear Bdedpsx Hr S Sefx Ahmsh - Aspo recoiler

Condition: refurbished (used), Meat processing line to produce a coarse sausage mix / burger mix / pet food line Taking a tempered frozen meat block into a Guillotine Giraffe feed up into a mincer, Mincer to coarse mince flaked meat Incline conveyor taking minced meat through a 10 mm to 16 mm hole plate Minced meat transferred by the conveyor into the Mixer Grinder Add seasoning / water etc to complete the recipe Mix in the mixer grinder for 3 to 5 minutes Mince out through a 5 mm to 8 mm hole plate into a tote bin. Ruhle Guillotine Scansteel Giraffe Feeder Bsdpezl Tb Njfx Ahmjdh Laska WW 130 2 Cross feed Mincer Incline conveyor Thompson 4000 Mixer Grinder Product ready for the next stage vacuum filler / tray depositor / burger former etc

Condition: good (used), shelf length: 2,650 mm, shelf height: 2,278 mm, Technical data for the shelving unit: Shelving system: SSI Schäfer Type: R 3000 Technical data regarding installation: Number of shelving rows: 01 pc. Bjdpfx Ajw H Rhxohmjdh Shelving length: approx. 2,650 mm Number of bays per row: 02 pcs. à 1,280 mm Number of levels incl. ground level: 06 pcs. Scope of delivery includes: 03x Upright frames, new Material finish: Sendzimir galvanized Frame profile dimensions: 31 x 60 mm Including bracing bars and base plates The uprights are pre-assembled Height: 2,278 mm Depth: 800 mm 12x Shelf panels, used Material finish: Sendzimir galvanized Dimensions: 1,280 x 775 x 40 mm Weight | per piece: approx. 11.68 kg 01x Cross bracing, used Designation: KV31313 Material finish: Sendzimir galvanized 01x Load capacity sign with details of bay and shelf loads, manufacturer, and commission number Dimensions: 297 x 210 x 2 mm General information about the item: This item is only available for collection. Any desired transport or shipping of this item is subject to additional costs, which can be provided separately depending on delivery location and scope.

Condition: like new (used), total length: 1,356 mm, total width: 640 mm, number of shelf rows: 1, frame height: 2,490 mm, support length: 1,300 mm, Technical data for the shelving unit: Shelving system: META Type: CLIP Technical data for installation: Number of shelving rows: 1 Shelving length: approx. 1,356 mm Number of bays per shelving row: 1, each 1,300 mm Number of levels including base level: 6 Included in the scope of supply: 02x shelving uprights, used Material color: blue Frame profile dimensions: 50 x 40 x 1 mm Adjustment grid: 25|25 mm Incl. base plates and partition strip The uprights are pre-assembled 2,490 mm high 640 mm deep 06x shelves, new (2nd choice) Shelf designation: MS150-III Material color: sendzimir galvanized Dimensions: 1,300 x 600 x 40 mm Max. load per shelf: 150 kg with evenly distributed load 04x leveling shims, used Dimensions: 76 x 58 x 2 mm Weight per piece: 0.064 kg Material color: sendzimir galvanized 24x shelf supports, new Weight per piece: approx. 0.014 kg Material color: sendzimir galvanized 01x cross bracing, used Material color: sendzimir galvanized 01x load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 297 x 210 x 2 mm General information about the item: Bodpfezun N Tox Ahmedh This item is offered for pick-up only. Any further desired transport or shipment of this item will incur additional costs, which can be inquired separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 2017, Overview Complete automatic canning line for beer by American Beer Equipment (ABE), built around the LINCAN 35 inline can filler and seamer. The line runs from the can depalletizer through the twister rinser, atmospheric filling and lid seaming to the air knife dryer. It is fully operational, with maintenance up to date and the latest software installed. Technical data - Year of manufacture: 2017 (LINCAN 35) - Capacity: rated 35 cans/min on 0.33 L cans; about 1,500 cans/h in production - Can formats: 0.33 L and 0.44 L in use; compatible with 0.355, 0.375, 0.5 and 0.568 L cans - Filling: atmospheric, for beer at about 3 °C, CO2 purge of each can before filling - Utilities: compressed air at 100 psi (approx. 7 bar), CO2 at 60 psi (approx. 4 bar) - Cleaning: CIP function started from the HMI - Control: touchscreen HMI with daily, weekly, monthly and lifetime can counters - Construction: stainless steel Scope of Delivery Bdodpfxjz Hzius Ahmsh - Can depalletizer | Norland | YELLOW JACKET | for aluminium cans up to 24 oz, pallets 56 x 44 in with tier sheets, approx. 340 kg, footprint approx. 2.7 x 2.7 m with conveyor, height approx. 3.5 m - Twister rinser | inclined can twister with rinsing - Atmospheric can filler | LINCAN 35 | 7 inline filling nozzles with level probes, CO2 purge - Can seamer | LINCAN 35 | seaming unit upgraded, retaining bar added on the lid feed - Drying unit | air knife on the discharge conveyor - Documentation | operator manuals, printed and PDF Condition Fully operational and in very good condition, inspected in production. Maintenance up to date, software updated, seaming and lid feed improved. Availability Immediately. Location: Spain.

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Bdedpswuzzrofx Ahmeh Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Bedpfoixqg Nox Ahmedh Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Condition: good (used), Year of construction: 2002, operating hours: 1,378 h, Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Operating hours: 1,378 Screw diameter: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4,500 x 1,200 x 2,200 mm Weight: 1,350 kg Line configuration: – 1x gravimetric powder feeding system from Brabender Bdedpfx Aoz Eg Awehmsh – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities – Cooling roll with tempering unit – Pelletizer with adjustable speed – Central control cabinet Other: All documentation available in German The machine was originally used for biomaterials

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. Bjdpfxjttlfko Ahmsdh LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.