Used Scm / Holzkraft Minimax Fs 52Es Tersa Digital for sale (9,657)

Condition: new, Year of construction: 2026, Maximum configuration for the professional user. Combination machine with TERSA cutterblock, miter cutting device and pivoting milling spindle Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside Highly precise format sliding table made of anodized aluminum on hardened and riveted steel guide rails Large outfeed table (1200 x 650 mm) with roller and extendable aluminum telescope fence up to a maximum of 3300 mm Saw unit can be pivoted from 90° to -45° Pivoting milling spindle from 90° to -45° to the rear into the milling fence Psdpscnxa Sjfx Aflsgp Four milling speeds Right/left rotation of the milling spindle Quick changeover to the thickness planer thanks to parallel-opening planer tables 2-stage feed rate on the thickness table Helical toothed steel feed roller for even wood feed Three independent industrial motors With separate saw parallel fence and separate joiner fence With lockable main switch Equipment details: Format fence Immediate control Outfeed table Outfeed table with angle-adjustable telescope stop with degree scale Sliding table with ball contact system made of anodized aluminum Guides made of hardened and ground steel F550S, 15% harder than conventional steel Guides riveted and not glued easy running, quiet and reliable 10-year HOLZKRAFT warranty on wear of the hardened guide rails Cast iron double-pivot saw unit Height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts located close to the saw blade, bearing on both sides height- and up to 45° angle adjustable standard scoring unit with separate scoring motor 0.55 kW Double-pivot milling unit large, pivoting double-pivot milling unit made of cast iron Milling fence heavy-duty professional design the high-quality milling fence made of cast iron comes standard with fine adjustment 3-way positionable for quick restoration of the setting with fine adjustment via rack and pinion, digital display and aluminum milling fence cheeks Planing units helical toothed steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent workpieces from kicking back 4-knife Tersa cutterblock ensures an optimal planing result table lips for quieter operation Tersa planing cutterblock No more adjustment and screwing Planer knife change in seconds Self-locking particularly quiet Thickness table The thickness table is mounted on four large-dimensioned spindles, which ensure maximum stability under all working conditions Due to the special lifting device, the table position is maintained without fault, even without locking Parallel fence with fine adjustment and quick clamping stable round bar guide made of ground steel interchangeable aluminum ruler No gap, guide rods are overlapping Separate joiner fence large, professional design (1800 x 150 mm) 0-45° pivotable with quick adjustment stable round bar guide made of ground steel Simultaneous opening Type: No. 5500557

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds for sawing, milling, planing/thicknessing, and optional mortising torsion-resistant steel cast iron construction Pgjdocnxa Njpfx Afljp machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit Scope of delivery: Combination fence/parallel fence Arc milling guard Tersa cutterhead Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Saw blade inclination 90° - 45° ---Technical data planer--- Working width 300 mm Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Spindle speed 3500/600/800 rpm Spindle diameter 30 mm Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result

Condition: new, Year of construction: 2026, Combination saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel 2250 mm) Large rip fence frame (900 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm, featuring professional stop flaps Max. saw blade diameter 315 mm with scoring device, swiveling from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double-bearing milling unit ensure maximum stability, precision, smooth running, and long service life Solid and precise machine table made of stress-free cast iron Three milling speeds, manually adjustable from 3500 - 10000 min⁻¹ With right-hand/left-hand rotation of the milling spindle Standard arc milling guard Safety flip stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Pgodshp Rdlspfx Aflop Dimensions and weights Weight approx. 470 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Electrical data Power of drive motor 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 100 mm Spindle speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. non-tilting 210 mm tilting 180 mm dovetail milling 275 mm Circular saw unit Rip fence length 1600 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2660 mm Saw blade inclination 90 45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade overhang 90° 100 mm Max. saw blade overhang 45° 78 mm Diameter (main) saw blade 315 mm Explanation diameter (main) saw blade: independent of the scoring saw Speed (main) saw blade 4000 min⁻¹ Sliding table and table Table length 1112 mm Table width 430 mm Scope of supply: Arc milling guard Anodized aluminum format sliding table Aluminum stop jaws Flip stops Location: In stock at 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, Combination machine, 4-in-1, HOLZKRAFT CU 410c F 26 N Tersa -- Technical data -- - Circular saw - Reach 2,600 mm Max. saw blade diameter 315 mm Max. cutting height at 90°/45° 100 / 79 mm Max. rip width to the left of the saw blade 2,310 mm Cutting width with parallel guide 900 mm Saw blade tilt 90° - 45° - Jointer - Working width 410 mm Jointer table length 1,660 mm Cutterhead diameter / number of knives 72 mm / 3 pcs. - Thickness planer - Table dimensions 410 x 605 mm Min./max. working height 3 / 230 mm Max. chip removal 4 mm Feed rate 7 m/min - Table router - Usable length of spindle 100 mm Max. tenoning tool diameter 275 mm Max. tool diameter 210 mm Pjdpfod Dtc Tex Aflegp Spindle speed 3,500 / 6,000 / 10,000 rpm Spindle diameter 30 mm - General - Motor power 400 V / 50 Hz, 3 x 5.0 kW (6.6 hp) Dust extraction port diameter 4 x 120 mm Dust extraction port diameter, saw blade guard 60 mm - Special offer price - Location: In stock, 54634 Bitburg

Condition: new, Year of construction: 2025, Table saw/router combination minimax tw 45c With aluminum sliding table and pivoting router spindle – high performance at a low investment Article number 5502045 Pgodpfx Afohp Rcyelsp Brand Holzkraft / SCM TECHNICAL DATA Dimensions and weights Net weight approx. 290 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Work table Work table length 1000 mm, Sliding table length 1000 mm Work table width 435 mm, Sliding table width 270 mm Table height 900 mm Installation information Space requirement length 1945 mm, Machine body width/depth 710 mm Space requirement width/depth 2220 mm, Working area length 1600 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 1600 mm Machine body length 1000 mm, Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400V, Power of drive motor 5.0 kW Mains frequency 50Hz Router spindle Spindle inclination 0 to -45°, Spindle speed 3500/7000/10000 min⁻¹ Usable length of the spindle 100 mm, Spindle arbor diameter 30 mm Maximum spindle overhang above the table 130 mm Maximum router tool diameter Maximum tool diameter, plunge-cut 180 mm, Maximum tool diameter, mortising cutters 275 mm Maximum tool diameter, profile cutters 210 mm DELIVERY SCOPE Arched router guard Anodized aluminum sliding table Telescopic miter fence Aluminum fence cheek

Condition: new, Year of construction: 2026, Holzkraft Minimax ST 5es – Maximum configuration for professionals Saw-milling combination with miter cutting device and pivoting milling spindle Art. No.: 5501086 Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit can be pivoted from 90° to -45° High-precision format sliding table made of anodized aluminum Large extension table (1200 x 650 mm) With material roller and extendable aluminum telescope stop up to 3300 mm Pivoting milling spindle from 90° to -45° towards the rear into the milling fence Four milling speeds With right/left rotation of the milling spindle Three independent motors With lockable main switch, motor protection switch Supplied as standard with separate saw parallel fence and separate jointing fence for planing Equipment details: Sliding table with ball contact system Made of anodized aluminum Guides made of hardened and ground steel, 15% harder than conventional steel Double-bearing milling unit Pivoting, made of cast iron Mounting points directly on the table, resulting in optimal smoothness Milling spindle mounted high up on precision ball bearings, resulting in low bearing load and maximum possible service life Powerful industrial motors Milling fence Heavy-duty professional design The high-quality milling fence made of cast iron is supplied as standard with fine adjustment 3-way positionable for quick resetting of the setting With fine adjustment via rack and pinion, numerical display and aluminum milling fence jaws Parallel fence Pedpfxsd Hx Hms Afljgp With fine adjustment and quick clamping Stable round bar guide made of ground steel Can be conveniently folded down for cutting large workpieces Interchangeable aluminum ruler for narrow workpieces Cast iron double-bearing saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to the saw blade, bearing on both sides Height and adjustable up to 45° Scoring unit with separate scoring motor 0.55 kW as standard Extension table with angle-adjustable telescope stop with degree grid division Dimensions and weights Weight approx. 900 kg Dust extraction connection Dust extraction nozzle diameter 3 x 120 mm Dust extraction nozzle diameter saw blade guard 80 mm Drive power Scoring motor 0.55 kW Main motor 2 x 5.0 kW Electrical data Connection voltage 400 V Format sliding table and table Format sliding table width 360 mm Format sliding table height 142 mm Table length 1380 mm Table width 465 mm Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 125 mm Spindle speeds 3500/6000/8000/10000 min⁻¹ Milling tool diameter max. Lowerable 240 mm Mortise milling 320 mm Circular saw unit and scoring saw Cutting length 3200 mm Cutting width with parallel fence 900 mm Max. ripping width to the left of the saw blade 3300 mm Saw blade inclination 90 - 45 ° Max. cutting height 90° 104 mm Max. cutting height 45° 68 mm Location: In stock, 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to the precision unit and the heavy cast-iron construction Front steel infeed roller with helical gearing for optimal feed rate Satin-finished steel outfeed roller, optionally with a rubber roller in the outfeed The work table is mounted on four large columns, ensuring maximum stability under all working conditions. The thickness table adjustment is done via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Standard with two feed speeds, comfortably selectable from the operator's side Powerful industrial motor Stable steel and cast iron construction Equipment details: Work table Mounted on four large spindles, which ensure maximum stability under all working conditions A special lifting device ensures that the table position is maintained perfectly, even without locking TERSA planing cutterhead No more adjustment and screwing Planer knife change in seconds Self-locking Particularly quiet Thickness table adjustment on S 41 elite s via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Dimensions and weights Length approx. 900 mm Width/Depth approx. 1070 mm Weight approx. 361 kg Dust extraction connection Dust extraction nozzle diameter for thicknessing 120 mm Drive power Main motor 5 kW Installation information Space requirement Length 1070 mm Space requirement Width/Depth 900 mm Space requirement Height 1100 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body Length 1040 mm Machine body Width/Depth 900 mm Length 3000 mm Width 1600 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thicknessing Thickness table Length 423 mm Thickness table Width 775 mm Working height min. 3 mm Working height max. 240 mm Working length min. 180 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 95 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 410 mm Feed Pgodpfxjd Hx Hns Aflsp Speed 6/12 m/min

Condition: as good as new (ex-display), Year of construction: 2025, minimax ti 55es LL – Table saw The illustration shows the T 55 i elite s in its standard version. The professional machine for skilled tradespeople, featuring a pivoting milling spindle and 4 speeds. M Digital: motor-driven height adjustment and pivoting. Sturdy steel and cast iron construction. Oversized milling unit made of cast iron, pivoting up to -45° to the rear. LED display of milling speeds. Fast, trouble-free speed change via eccentric clamping. Clockwise/counterclockwise rotation. Display of height and inclination with 1/10 mm accuracy. Heavy-duty professional fence: with fine adjustment via rack and pinion, with numerical display, aluminum fence cheeks, 3-way positioning for quick repetition of the setting. Scope of delivery: Aluminum fence cheeks Arched milling guard Table extension on the left and right Model: minimax ti 55es LL Article no.: 5502252 Technical data Dimensions of the work table: 2500 x 655 mm Dimensions of the format sliding table Usable length of the spindle: 125 mm Max. tool diameter: 240 mm Max. tool diameter (lowered): 230 mm Max. tool diameter (dovetail cutter): 320 mm Spindle inclination: 0 to -45 degrees Speeds: 3500/6000/8000/10000 min-1 Pgsdsdqzh Repfx Aflsp Motor power 400 V/ 50 Hz / S6-40%: 5.0 kW Dust extraction port diameter: 2 x 120 mm

Condition: new, both working tables open at the same time! working width 410 mm cutter block DM 95 mm knife dimensions 410 x 30 x 3 max. chip removal 5 mm working table length 2200 mm thicknesses table dim. 410 x 775 mm feed speed 6/12 m/ min min. ÷ max. work piece height 3 ÷ 240 mm Motorleistung 5,0 kW, 400V, 50 Hz incl. options: "Tersa”-cuter block Ø 95 mm, with 4 pcs knifes auxiliary fence for small work pieces Pjdedvn Hwspfx Aflegp electric height adjustment for thicknessing table with digital readout

Condition: new, - NEW -description- Stable cast steel construction- Milling spindle can be swiveled backwards from 0 ° to -45 °- Three spindle speeds from 3500 - 10000 rpm- As standard with right-left rotation of the milling spindle- Large-sized milling unit made of gray cast iron,attached directly to the table- Solid and precise gray cast iron table- Quick and easy speed change- Powerful 5.0 kW industrial motor- Standard curved milling protection hoodEquipment detailsAluminum sliding carriage- Equipped with a thousand times tried and testedBall contact system- torsion-resistant, extremely precise, smooth-running andproblem-free in daily use- 10 year Holzkraft guarantee on wear and tearof the guidewaysGray cast iron milling unit- Attached directly to the router table- Milling spindle mounted high up with precision ball bearings,thus the lowest possible bearing loadand the longest possible service life- 3 milling speeds from 3500 to 10000 rpmPowerful engines- Equipped with a powerful three-phase motorMilling protection- The milling protection is standard for maximum safetywith a height-adjustable guide railand ling stop- Exact milling stop with a quick adjustmentand a fine adjustment with a scale on the stop jaw- The integrated suction connection ensures a clear viewRouter table opening- A large router table opening also enablesthe use of larger flattening cuttersand tenoning and slotting toolsabove and below the tableArc milling protection hood- Included as standard in the scope of deliveryReversible stop jaws- Versatile integrated stop for bridgingthe tool gap- Allows you to work safely withnarrow workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 290 kgConnection suctionExtraction nozzle diameter 2 x 120 mmWork tableWorking table length 1000 mmSlide length 1000 mmWorking table width 435 mmSlide carriage width 270 mmTable height 900 mmInstallation informationRequired space length 1945 mmMachine body width / depth 710 mmRequired space width / depth 2220 mmWorking area length 1600 mmExplanation of space requirementsThe dimensions take into account maximum travels or useful king area width / depth 1600 mmMachine body length 1000 mmExplanation of the work areaPlease add the specified dimensions with the space required in order to obtain the free installation area recommended for the ctrical dataConnection voltage 400 VMains frequency 50 HzPhase (s) 3 PhDrive motor power 5.0 kWType of current ACMilling spindleSpindle inclination 0 to -45 °Spindle speed (s) 3500/7000/10000 min¯¹Usable length of the spindle 100 mmSpindle mandrel diameter 30 mmSpindle overhang r table 130 mmMilling tool diameter l diameter can be lowered 180 mmTool diameter max. Tenon milling 275 mmTool diameter file milling 210 mmscope of deliveryArc milling protection hoodAnodized aluminum sliding carriageTelescopic miter fenceAluminum stop jawsItem No. 5502045 Podevwf Ucspfx Aflogp

Condition: used, functionality: fully functional, Jointer-planer, thicknesser SCM MiniMax FS 30 Specifications: • Condition – used, after a comprehensive overhaul • Manufacturer – SCM MiniMax series • Model – FS 30 • Working width – 300 mm • Working height of the thicknesser – 240 mm • Table length – 149 cm Pedpfx Afsza E H Iolegp • Noise-reducing combs near the shaft • Motor power – 1.85 kW (220V – can be changed to 380V) • 3-knife shaft for traditional knives (diameter 70 mm) • Side table 43 x 22 cm for a drill • Head with a drill chuck for drills with a diameter of 16 mm • Original paint • Weight 260 kg • Overall dimensions 150 x 105 x 102 cm (length x width x height) Additional information: • The machine is in good technical condition and ready for immediate use • The presented photos show the actual condition of the item being sold • Possibility to switch on and test the device on-site • Free training on how to operate the machine (at the company's premises) • The price listed in the auction does not include VAT and transport costs Financing and transport: • We arrange transport using the MDD fleet, courier companies, or external carriers • We offer financial support in the form of leasing or lease financing

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Pedpevyuqfefx Aflogp

Condition: new, - New -Description:- Top equipment for high productivity in a small space!- Intuitive operation with the eye-S control and 10"large touch screen: HMI Maestro Active Edge,Graphic display of all machining units and theiroperating status, Graphic simulation of machining operations,Control of all machining units, Regulationof glue tank temperature, Assistance functionsfor setting up the machine according to the machining program,Fault diagnosis for quick elimination of simple errors,Statistics on machining parameters, USB connection,Preparation for network connection, Preparation for Industry 4.0with data transmission protocol API REST- Excellent accessibility to the working aggregatesthanks to the large hood that ensures protection and noise reduction- Monoblock construction made of steel ensures high stabilityand rigidity of the machine- Automatic aggregate positioning when changingthe panel thickness- Automatic application of the strip edges with edge magazine(me 35 t s): The strip edges of solid wood areautomatically loaded and synchronized with the panel guide- Panel feed is made by feed chain with rubber glides- Extendable workpiece support- Adjustment of the infeed ruler via spacer platesTechnical data:Dimensions and weightsLength approx. 3314 mmHeight approx. 1300 mmWidth/depth approx. 1085 mmWeight approx. 545 kgflush radius milling unitflush radius milling unit input power 2 x 0,35 kWflush radius milling unit cutter speed 12000 min¯¹flush radius milling unit cutter diameter HM 55.3 mmFlush radius milling unit suction port diameter 2 x 60 mmElectrical dataSupply voltage 400 VMains frequency 50 HzGlue unitGlue tank input power 0,25 kWGlue tank suction port diameter 60 mmGlue tank working temperature 190 °CGlue tank filling quantity 0.8 kgPneumatic connectionOperating pressure 6.5 barAir consumption 470 l/minFeed rateFeed input power 5 kWFeed speed 7 m/minEdgesEdge thickness roll material 0.4 - 3.0 mmEdge thickness strip material - 5.0 mmPre-milling unitPre-milling unit input power 3 kWPre-milling unit diamond cutter diameter 80 mmPre-milling unit material removal ,5 / 2 mmpre-milling unit cutter speed 7200 min¯¹pre-milling unit cutter height 56 mmpre-milling unit exhaust diameter 2 x 80 mmscraper unitradius scraper 2 mmbuffing unitbuffing unit input power 2 x 0,14 kWbuffing unit speed 2800 min¯¹workpieceworkpiece thickness 8 - 50 mmworkpiece width min. 110 mmWorkpiece length min. 120 . 5507235 Pgedpevwfmlefx Aflsp

Condition: new, DescriptionWork table made of heavily ribbed gray cast iron and base frame made of welded steel guarantee torsional rigidity and vibration-free operationUnique in this performance class: Format sliding carriage made of anodized aluminum for highest cutting precisionCutting plane directly on the saw bladeSwiveling saw blade from 90° - 45Trimming frame with aluminum crosscut fence and adjustable fence jaw for panels and large workpiecesMilling protection hood for profilingTwo independent motors for each working unitTECHNICAL DATADimensions and weightsWeight (net) approx. 190 kgSuction connectionSuction port diameter 120 mmSuction port diameter saw blade guard 60 mmElectrical dataSupply voltage 400 VMains frequency 50 HzNominal operating mode drive motor S6Duty cycle drive motor 40Power of drive motor 2 x 1.8 kWSliding carriage and tableLength of sliding table 1140 mmFormat sliding carriage width 201 mmHeight of format sliding carriage 70 mmtable length 1040 mmtable width 224 mmMilling spindlespindle mandrel diameter 30 mmuseful length of spindle 75 mmspindle speeds 5000/7500 min?¹Milling tool diameter l diameter max. 160 mmtool diameter max. tenon milling 200 mmCircular saw unittrimming length 1200 mmCutting width with rip fence 700 mmMax. Trimming width to the left of the saw blade 1200 mmSaw blade inclination 90 - 45Max. Cutting height 90° 75 mmMax. cutting height Cutting height 45°60 mmMax. Saw blade projection 90° 67 mmMax. saw blade Saw blade projection 45°40 mmDiameter (main) saw blade 250 mmSpeed (main) saw blade 4000 min?¹EquipmentAnodized aluminum sliding carriageTrimming frame with angle-adjustable crosscut fence with a folding stop and degree scaleSaw parallel stopEccentric clampTable wideningTrimming fence with wooden fence jawsManual height adjustment of the spindleSaw blade height adjustment manualsaw blade tilt adjustment manual&nbsp, Podjvwfqwepfx Afljgp

Condition: new, Year of construction: 2025, Jointer-Thicknesser minimax fs 41es TERSA Maximum configuration for the professional user. Article number 5503431 Brand Holzkraft / SCM Helically toothed steel infeed roller for consistent and uniform material feed, enabling chip removal starting from 0.2 mm (with a minimum workpiece thickness of 3 mm) – ideal for economical planing of precious woods. Models with a TERSA cutterblock for seconds-fast planer blade changes and particularly quiet operation. Material feed with two speeds. Particularly long jointer tables enable easy and precise jointing of workpieces. Work tables made of grey cast iron, annealed and stress-free, making them insensitive and permanently flat. Tables that open simultaneously towards the rear for short setup times. Thickness table adjustment via handwheel with numerical display for planing height. High machine weight for maximum precision and smooth operation. Powerful industrial motor. Robust steel/grey cast iron construction. Quality – Made in Italy. Pjdpjlht Htsfx Aflegp TECHNICAL DATA Dimensions and Weights Length (product) approx. 2200 mm, Net weight approx. 450 kg Width/Depth (product) approx. 1160 mm Jointer Total length of tables 2200 mm, Jointer fence length 1200 mm Working height 905 mm, Jointer fence height 150 mm Chip removal max. jointer 5 mm Connection for dust extraction Dust extraction nozzle diameter thickness 1 x 120 mm Thicknesser Thickness table length 775 mm, Working height thickness max. 240 mm Thickness table width 410 mm, Chip removal max. thickness 5 mm Working height thickness min. 3 mm Electrical Data Power drive motor 5 kW, Mains frequency 50 Hz Connection voltage 400 V Planer cutterblock Planer cutterblock type TERSA, Planer cutterblock speed 5000 min⁻¹ Planer cutterblock diameter 95 mm, Planing width max. 410 mm Number of planer blades 4 pcs Feed Feed speed 6 / 12 m/min SCOPE OF DELIVERY Jointer fence with round bar guide & auxiliary fence Two feed speeds Tersa cutterblock Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, For sawing, milling, planing/thicknessing, and optionally mortising in a confined space. High-precision format sliding table made of anodized aluminum, available in various lengths. Large outrigger (1200 x 650 mm) with a material support roller and extendable aluminum telescope fence up to a maximum of 3200 mm with professional fence flaps. Max. saw blade diameter 315 mm, swiveling from 90° to -45°. Large swivel range of the milling spindle from 90° to -45° to the rear. Four milling speeds up to 10,000 min⁻¹, manually adjustable. With clockwise/counterclockwise rotation of the milling spindle. Heavily ribbed planing tables made of stress-free gray cast iron for decades of stability and flatness. 2-stage feed rate for thicknessing. Three independent industrial motors for continuous operation. With lockable main switch, motor protection switch. Fixed handwheels. Dimensions and Weights Weight (net) approx. 857 kg Planing Planing table width 410 mm Planing table length 2000 mm Maximum planing material removal 5 mm Dust extraction connection Dust extraction port diameter 3 x 120 mm Dust extraction port diameter saw blade guard 60 mm Installation Information Space requirement length 5960 mm Space requirement width/depth 5140 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Working area length 1600 mm Working area width/depth 1600 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thicknessing Thicknessing table length 757 mm Thicknessing table width 423 mm Minimum working height (thicknessing) 3 mm Maximum working height (thicknessing) 230 mm Maximum material removal (thicknessing) 5 mm Electrical data Connection voltage 400V Mains frequency 50Hz Rated operating mode drive motor S6 Duty cycle drive motor 40% Power drive motor 3 x 5.0 kW Sliding table and table Format sliding table length 2660 mm Format sliding table width 360 mm Format sliding table height 142 mm Table length 1250 mm Table width 430 mm Table height 900 mm Milling spindle Spindle inclination 0 – -45° Spindle arbor diameter 30 mm Usable length of the spindle 125 mm Spindle speed(s) 3500/6000/8000/10000 min⁻¹ Maximum milling tool diameter Pgedpfx Aeih Dxloflsp Maximum tool diameter, adjustable 210 mm Maximum tool diameter, adjustable 45° 150 mm Maximum tool diameter, mortising 275 mm Planing cutterhead Cutterhead type TERSA Cutterhead diameter 87 mm Number of planing knives 4 pcs Cutterhead speed 5200 min⁻¹ Circular saw unit Beside length 2600 mm Cutting width with parallel fence 900 mm Maximum crosscut width to the left of the saw blade 3260 mm Saw blade inclination 90 – 45° Maximum cutting height at 90° 90 mm Maximum cutting height at 45° 63 mm Maximum saw blade protrusion 90° 100 mm Maximum saw blade protrusion 45° 71 mm Diameter (main) saw blade 315 mm Explanation of diameter (main) saw blade: with scoring saw Speed (main) saw blade 4000 min⁻¹ Feed rate Feed rate 6 – 12 m/min Location: In stock 54634 Bitburg - immediately available -

Condition: new, Jointer and thickness planer HOLZKRAFT fs 41es TERSA - Exhibition machine - ----- Technical data ----- Planing width: 410 mm, Thicknessing table dimensions: 775 x 410 mm, table length: 2,200 mm, max. chip removal: 5 mm, planer shaft Ø: 95 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 6 / 12 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Pgjdpfxsu R S Awe Aflsp Motor power 400 V: 6.6 HP / 5.0 kW kW, weight: 450 kg - Special offer price - - new exhibition machine -

Condition: new, Description: Planer Surface planer with TERSA quick-change planing knife system With TERSA cutterblock for changing planing knives in seconds TERSA planer blade system enables particularly quiet running Helically toothed steel infeed roller for constant and even wood infeed The particularly long, one-piece planer tables enable easy planing of the workpieces Large planing fence can remain in position when the planing tables are opened Dressing tables open to the rear The high machine weight ensures maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction Pjdju Diwlopfx Aflegp Special equipment features Work tables are made of gray cast iron, annealed and stress-free, making them robust and permanently flat Table lips for quiet running Equipment details TERSA planer cutterblock No more adjusting and screwing Planer blade change in seconds Self-locking Particularly quiet Perfect planing result Suction hose connection The extraction nozzles of the jointer and thicknesser point in the same direction. The hose is connected from one side only. No hose is required to reach around the machine. Drive Sturdy chain drive Steel drive wheels Solid cast iron bearing block Planing unit Solid kickback guards prevent workpieces from kicking back 3-blade TERSA shaft ensures an optimum planing pattern The material infeed Helical-toothed steel feed rollers for constant and even material feed without marks Several teeth engage simultaneously for powerful feed Wear-free in contrast to rubber feed rollers Technical data Jointer total table length 1510 mm Jointer working width 300 mm Jointer chip removal max. 4 mm Thicknessing dimensions thicknessing table 565 x 300 mm Thick working height min. 3 mm Thick working height max. 230 mm Thicknessing feed speeds 7 m/min Planer shaft speed 5200 min-1 Planer shaft diameter 72 mm Number of planing knives 3 pcs. Electrical connection 400 V Motor power 4.0 kW Suction nozzle diameter 2 x 120 mm Weight 270 kg Optional slot drilling device Table size 470 x 220 mm Optional slotted hole drilling device transverse/longitudinal stroke 160 mm / 110 mm Optional slot drilling device vertical stroke 120 mm Scope of delivery & equipment TERSA planer cutterblock Anodized aluminium planing fence

Condition: used, Year of construction: 2019, used, top condition, low hours with Tersa cutterblock Make: SCM-Minimax Model: FS41C Year of manufacture: 2019 Machine No.: KK00003566 CE type-tested Pgsdpfx Aey Apfusflep Motor: 5 kW Planing width approx. 410 mm Planing height approx. 220 mm Table length approx. 900/900/1800 mm Bridge guard Slotted table lips Low-noise table lips automatic brake Number of knives: 3 pcs Knife system: - Tersa reversible knives Digital display for planing height, analog Integrated extraction hood Original price approx. 5500 € Extraction connection: 2 x 120 mm diameter Space requirement approx. 2000 x 800 x 1000 mm Weight approx. 320 kg Storage location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without any warranty or guarantee.

Condition: new, Year of construction: 2023, power: 7 kW (9.52 HP), planing width: 520 mm, number of blades: 4, overall weight: 483 kg, height adjustment type: electric, planer shaft diameter: 120 mm, planing height: 240 mm, SCM MiniMax s 52es thicknesser Specifications: - condition - new - manufacturer - SCM - width of the thicknesser table - 520 mm - length of the thicknesser table - 850 mm - minimum thickness of the element - 3 mm - maximum thickness of the element - 240 mm - maximum thickness of the thicknesser harvest - 5 mm - motor power - 7 kW - supply voltage - 400 V - shaft for 4 conventional knives - diameter of planer shaft - 120 mm - rotational speed of the planer shaft - 5000 rpm - maximum planing width - 520 mm - feed speed - 5 / 8 / 12 / 18 m/min - diameter of the exhaust stub - 120 mm - weight (net) - about 493 kg - overall dimensions - 144 x 108 x 110 cm ( W x L x H ) Additional information: - machine brand new - pictures show the actual state of the object of sale - possibility to turn on and check the machine on site. - the price given in the auction does not include VAT and transport costs Pjdequ U Dnepfx Aflsgp - available from stock in Italy

Condition: used, Year of construction: 2000, functionality: fully functional, – very good condition – Italian manufacture – year of production: 2000 TECHNICAL PARAMETERS: SURFACE PLANER: – working width: 410 mm – number of knives: 3 pcs – infeed table dimensions: 1030 x 410 mm – outfeed table dimensions: 930 x 410 mm – adjustable fence – noise-reducing comb THICKNESSER: – planing height: 3–230 mm – shaft diameter: 72 mm – shaft speed: 5300 rpm – table size: 700 x 410 mm – feed speed: 7 m/min – main motor: 4 kW – machine dimensions (L/W/H): 200 / 90 / 120 cm – weight: 400 kg Psdpfxoxl D Nqs Afljgp

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Approx. length: 2300 mm Approx. width/depth: 1100 mm Approx. weight: 980 kg Total table length: 2300 mm Infeed table length: 1200 mm Working height: 930 mm Max. cutting depth: 6 mm Fence length: 1200 mm Fence height: 190 mm Tilting range of jointer fence: 90 - 45° Thicknessing extraction port diameter: 120 mm Main motor: 7 kW Required space, length: 2300 mm Required space, width/depth: 1610 mm Required space explanation: Dimensions include maximum travel distances or usable lengths. Machine body length: 1235 mm Machine body width/depth: 850 mm Length: 1000 mm Width: 3500 mm Working area explanation: Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Max. cutting depth: 8 mm Connection voltage: 400 V Phases: 3~ Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed speed: 5/8/12/18 m/min Availability: Short-term Pgedpfsw I U Nujx Aflsp Location: Solingen

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2023 Approximate dimensions: Length: 2,300 mm Width/Depth: 1,100 mm Weight: 980 kg Total table length: 2,300 mm Infeed table length: 1,200 mm Working height: 930 mm Maximum cutting depth: 6 mm Fence length: 1,200 mm Fence height: 190 mm Fence tilting range: 90° - 45° Thicknesser extraction port diameter: 120 mm Main motor: 7 kW Space requirement length: 2,300 mm Space requirement width/depth: 1,610 mm Space requirement explanation: The dimensions include maximum travel paths or usable lengths. Machine body length: 1,235 mm Machine body width/depth: 850 mm Length: 1,000 mm Width: 3,500 mm Note on working area: Please add the specified dimensions to the space requirement to determine the recommended clear installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Maximum cutting depth: 8 mm Connection voltage: 400 V Phases: 3-phase Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5,000 rpm Pgodpfsxtgz Esx Aflop Maximum planing width: 520 mm Feed speeds: 5/8/12/18 m/min Availability: short-term Location: Solingen

Condition: new, With a 520 mm planing width, motorized thickness table adjustment, and comfort switching - Stable steel and cast iron construction - Large, ribbed jointer tables made of cast iron - Smooth operation due to high dead weight - Four feed speeds - Motorized thickness table lift with two speeds and digital display - Segmented pressure beam at the infeed - Precision ball bearings on the four-knife cutterblock - Helical, hardened steel infeed roller for especially consistent and gentle wood feed - Outfeed roller with rubber coating - Large tiltable fence, adjustable from 90° to +45° - Standard auxiliary fence included - Powerful industrial motor - Pneumatic quick-change system with pneumatic raising and lowering of the jointer table - The extraction port remains in the same position for both jointing and thicknessing operations—no need for additional extraction hoses, inconvenient switching, or rerouting around the machine Scope of delivery: Technical Data: Dimensions and Weights: - Length (product): approx. 2300 mm - Width/Depth (product): approx. 1100 mm - Weight (net): approx. 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Working height: 930 mm - Max. planing depth: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt: 90 – 45° Extraction connection: - Extraction port diameter, thicknesser: 120 mm Installation Information: - Space requirement, length: 2300 mm - Space requirement, width/depth: 1610 mm Explanation: Max. travel paths or usable lengths are taken into account. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm Note: Please add the working area to the space requirement to determine the recommended free installation space for the machine. Thicknesser: - Min. working height: 3.5 mm - Max. working height: 250 mm - Max. cutting depth: 8 mm Electrical Data: - Main drive motor power: 7 kW - Connection voltage: 400 V - Frequency: 50 Hz Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm Pgsdpjxnqyhofx Aflop - Number of knives: 4 - Cutterblock speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: new, - Sturdy steel and grey cast iron construction - Large, ribbed planing tables made of cast iron - Smooth operation due to high own weight - Four feed speeds - Motorized thicknessing table adjustment with two speeds and digital readout - Segment pressure bar at the infeed - Precision-mounted four-knife cutterblock - Helical gear steel infeed roller for particularly consistent and gentle timber feed - Outfeed roller with rubber coating - Large alloyed fence, tiltable from 90° to +45° - Auxiliary fence included as standard - Powerful industrial motor - Pneumatic quick-change system with pneumatic lifting and lowering of the jointer table - The extraction port position remains the same for both planing and thicknessing; no need for additional extraction hoses or awkward repositioning around the machine This item is covered by the 3-year Stürmer warranty with online registration. Warranty is valid for retail customers in Germany and Austria only. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3 – PO Box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product): approx. 2300 mm - Width/depth (product): approx. 1100 mm - Net weight: approx. 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Jointer table width: 520 mm - Working height: 930 mm - Max. planing depth: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt range: 90° – 45° Dust extraction connection: - Extraction port diameter, thicknessing: 120 mm Pgedsu T Hq Sopfx Aflep Installation information: - Required length: 2300 mm - Required width/depth: 1610 mm - Explanation: Dimensions account for maximum travel and usable length - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm - Note: Please add the specified working area dimensions to the required machine footprint to determine the recommended free installation space Thicknesser: - Thicknessing table width: 520 mm - Min. working height: 3.5 mm - Max. working height: 250 mm - Max. cutting depth: 8 mm Electrical data: - Main drive motor power: 7 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Planer cutterblock: - Cutterhead type: TERSA - Cutterhead diameter: 120 mm - Number of knives: 4 - Cutterhead speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min