Used Stahl 500/2000 for sale (23,361)

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: EM196 - IS4095, Steel crane, overhead crane, gantry crane, indoor crane Load capacity / lifting capacity: 5t - 5000KG Track gauge: 11,390mm, overall dimensions approx. 11,550mm TYPE EL-C 50 11,390 E Year of manufacture: 2001 Lifting height: 6m Overall height from top of crane to hook: approx. 900mm Head beam length with buffer: approx. 2290mm With floor-mounted control Crane is dismantled and immediately available Iiedpfx Aozv H Anjmgeh Very good condition, see pictures Column-mounted slewing cranes and wall-mounted slewing cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: used, This listing is for a Sorvall Heraeus 75002000 Centrifuge Rotor with Buckets. The unit is in full working condition and is ready for immediate release. Supplied with x4- 75002002 Round Buckets Enhance your laboratory's centrifugation capabilities with the Sorvall Heraeus 75002000 rotor, crafted for efficient performance in various applications. Key Features: Iiedpfsxxy Ucjx Amgsh Manufacturer: Sorvall Heraeus, known for reliability in laboratory centrifugation. Part Number: 75002000, ensuring you have the correct rotor for your specific needs. Maximum Speed: Capable of reaching up to 4,700 RPM, providing effective and rapid sample separation. Rotor Type: Swing Bucket Rotor design allows for smooth operation and optimal pelleting of samples as buckets swing out during centrifugation. Capacity: Accommodates 4 x 400 mL sample tubes, making it suitable for moderate volume applications. Maximum Load: Designed to support a max load of 540 g, ensuring stability even with heavier samples. Maximum RCF: Achieves a maximum relative centrifugal force (RCF) of 4618 x g, which is effective for a wide range of laboratory separation tasks. Compatible Centrifuges: Sorvall Legend Mach 1.6 Heraeus Multifuge 1S

Condition: excellent (used), Year of construction: 2008, Haulick + Roos Year of manufacture: 2008 Pressing force: 2,500 kN Stroke rate: 180 strokes/min Isdpfx Amjz Ei Ehegeih Stroke adjustment: 20-160 mm Ram adjustment: 150 mm Table surface: 1,950 x 1,000 mm Installation height: 450 mm Includes Fecker strip feeding system.

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 400 kg, total height: 950 mm, total length: 2,600 mm, total width: 820 mm, load capacity: 2,000 kg, latticeMastWinch Producing company Manitou Type JW 2000/2500 Iedpfx Aoya Ixtomgeih Year built 2025 Height (mm) 950 Length (mm) 2,600 Lifting weight (kg) 2,000 Weight (kg) 400 Width (mm) 820

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: KHT, Steel / Stocker indoor crane, gantry crane, bridge crane, including steel structure + floor control Steel structure dimensions approx. length 15m x 9.5m width with 1 bridge crane 12500kg, lifting height 6m Payload/lifting capacity 12.5t System technical data: Crane runway/steel structure consisting of HEA/HEB180 girders, HEB240 guide rails Length of outer edge of steel structure approx. 15m Total width of outer edge (steel structure) approx. 9.53m Total crane height approx. 4.52m Top of guide rails approx. 3.99m Bottom of guide rails approx. 3.87m Isdpjwgwrqofx Amgoih Top of bridge approx. 4.52m Bottom of bridge approx. 4.13m Hook height approx. 3.4m Track gauge approx. 6.23m Support spacing: left (2.65 + 4.44 + 4 + 3.5 m), right (4.6 + 4.9 + 4.9 m) System is delivered complete: Steel structure complete with conductor rail 1x bridge including travel drives 1x 12500 kg steel wire rope hoist SH 5032-25 4/1 1Am M4 lifting speed 1/6.3 m/min Crane is disassembled and immediately available The item is located in 75053 Gondelsheim Very good condition, see pictures Shipping via freight forwarder or pickup by appointment only

Condition: like new (used), Scale with the following dimensions: Length 2000 mm Width 1500 mm Height 110 mm Aisi 304 L stainless steel Load capacity 3000 kg The scale has valid certification for over 2 years Touchscreen display with multiple functions and language selection option Please check my other listings Isdpfx Amoy Ilvyogoih

Condition: used, Year of construction: 2006, Masterfill Filling Machine S 500 The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products. Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards. The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill S 500 integrates seamlessly into existing production lines. Key Features Isdpfx Amjywuczjgeih - High-precision volumetric filling system - Suitable for liquid and semi-viscous products - Hygienic stainless-steel construction - Easy-to-use control interface - Adjustable filling speed and volume - Low maintenance and easy cleaning - Compact and space-efficient design Applications - Milk and dairy products - Yogurt and desserts - Cream and sauces - Beverage and liquid food products Materfill S500 6 head fill while rise filler M2-AF Serial number 4716 YOM 2006 Filling capacity 2ml to 2000 ml The filler is a 6 head automatic filler, with the capacity to store 50 separate preset menus, Brief FDS • Controlled by Siemens S7 PLC via Mitsubishi Beijer HMI • Jars feed in vis constant stainless steel slat band • Jars indexed via program-controlled infeed and outfeed pneumatic gates. • Jars filled via positive pressure within 50 ltr holding tank (this could be changed easily to a constant positive pressure into manifold via modulating pump) • Volume controlled via Nixon BNO turbine flow meters communications with siemens high speed counter. • Liquid feeds into jar with rise during fill or above jar for fill time • Full SIP, CIP, and flush capability programs available Dico CapperSerial number 3/379Brief FDS  Capper with rotating starwheel  Will cap Square of round Jar/ Bottles (change parts included)  Jar enters, signals PEC starwheel turns 90⁰ under capping head  Capping lowers on cam, retracts on cam  Jar/ bottle clamp activated of adjustable cam onto 5/2 valve  Starwheel turns 90⁰ onto exit conveyor  Current capping head removable, for 40mm cap (no alternative head)  All systems work on cams and relays, no PLC  Motor runs on DOL for capping (clutch adjusted and variable speed gearbox)  Cam motor uses inverter. Guards with interlocked access doorway Required services.  3 Phase 32-amp electrical supply  7 Bar air pressure Main control panel Cap sorter and feederRNASRC-N 400-2LSerial no 00801Brief FDS  40mm cap sorter and feeder  Vibrating bowl agitates caps upwards  Air jets and cut outs sort caps placing in correct orientation  Cap chute allows smooth passage to dispensing head with some adjustment  Cap dispenser works on bottle/jar passing under and catching cap, this allows the retaining jaws to open and release cap  Side or over independent speed controlled wheel assists in cap leveling Required services.  240V electrical supply  3 Bar air pressure Filling volume: 25-2000 ml Controls: SIEMENS S7 via Mitsubishi H...

Condition: excellent (used), Year of construction: 2014, operating hours: 60 h, functionality: fully functional, machine/vehicle number: NL202140731, spindle motor power: 15,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 590 mm, type of input current: three-phase, total height: 2,145 mm, total length: 3,820 mm, total width: 2,081 mm, spindle nose: A2-6, overall weight: 5,100 kg, CNC Lathes with Milling NLX2000Y-500, Mori Seiki Year: 2014 Bar Capacity 65mm C axis 0.001 degree Control MORI M730B Machine Dimensions 3820 x 2081 x 2145mm Machine Weight 5100kg Maximum Cutting Diameter 366mm Maximum Cutting Length 510mm Milling Motor Power 5.5/3.7kW Milling RPM 10000rpm Ijdozua Egopfx Amgjih Rapid Feedrates 30m/minute Spindle Motor Power 15/11kW Spindle Nose A2-6 Spindle Speed 5000rpm Spindle Taper MT #4 Standard Cutting Diameter 271mm Swing 923.8mm Swing 755mm Tailstock Body Travel 564mm Tailstock Quill Diameter 80mm Tool Size 25 x 25mm Turret Positions 12 Station X axis Travel 260mm Y axis Travel +/-50mm Z axis Travel 590mm

Condition: excellent (used), Year of construction: 2010, 1,0 ST. gebr. Spritzgiessmaschine Hersteller: NETSTAL Typ: EVOS3500-2000 Baujahr: 2010 Schließkraft: 350 Tonnen Holmabstand: 730 x 730 mm Schneckendurchmesser: 70 mm Spritzteilgewicht: 916 g/PS Ijdpfoz Iy N Ajx Amgoih Ausstattung: Kernzüge 3 x DS / 2 x AS Schnittstelle Roboter

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 2591, load capacity: 3,200 kg, Stahl 3,200 KG double-girder overhead crane. - Span: 7,900 mm - Lifting capacity: 3,200 KG - Lifting height: 6 m - Year of manufacture: 2000 - Trolley with hoist renewed in 2019 Delivery, customization, installation, inspection, and commissioning are all possible upon request. Isdpfxsz Ea Ndj Amgjih If this crane is not exactly what you are looking for, we have more than 100 cranes and over 3,000 m² of parts in stock. Not all of our stock is listed online. Please call or email if you have any questions. We sell, among other things: - Overhead cranes - Underslung cranes - Column and jib cranes - Chain hoists - Demag KBK rails and accessories - Vahle conductor bars Keywords: overhead crane, gantry crane, Abus, Demag, Kone, Konecranes, Stahl

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: EM263 - IS4091, Steel crane, overhead crane, bridge crane, workshop crane Payload / lifting capacity 6.3 t - 6300 kg Gauge 11,390 mm, overall dimension approx. 11,550 mm TYPE EL-C 63 - 11.205 E Iisdpjzv H Ecjfx Amgjh Year of manufacture 1996 Lifting height 6 m Overall height from top of crane to hook approx. 950 mm Head girder length with buffer approx. 2180 mm With floor-mounted control Crane is disassembled and immediately available Very good condition, see pictures Column-mounted swivel cranes and wall-mounted swivel cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code Collection preferred

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 400 kg, total height: 950 mm, total length: 2,600 mm, total width: 820 mm, load capacity: 2,000 kg, latticeMastWinch Producing company Manitou Type JW 2500/2000 Year built 2025 Height (mm) 950 Length (mm) 2,600 Iodpfx Amjxpyamsgjih Lifting weight (kg) 2,000 Weight (kg) 400 Width (mm) 820

Condition: like new (used), functionality: fully functional, machine/vehicle number: ST 1005-8/2 1/1, Year of construction: 2021, lifting height: 8,000 mm, chain length: 9,000 mm, load capacity: 500 kg, lifting speed: 133 mm/s, fine lifting speed: 33 mm/s, type of input current: three-phase, The overhead crane is in like-new condition and has been used very little. The chain is well-maintained and greased. Manufactured and calculated by Ralf Brinkmann GmbH. Transport within Switzerland and export can be arranged; the buyer bears the costs. Technical data: Load capacity: max. 500 kg Runway type: IPE runway beam Runway length (fixed): 12,000 mm Runway length (movable): approx. 9,595 m of which 4,615 mm (extending from the building) System consisting of: 12.00 m IPE runway beam for attachment to the existing concrete ceiling (2 pieces of 6,000 mm each with connecting elements) - Mounting plate on top - 9.59 m IPE runway beam, for movement on the "ceiling rail". intended for attachment via the following travel units. Additionally, it has two counter-pressure rollers, at the rear. Eyelet for attaching the hand trolley to be able to retract the telescopic rail, at the rear end of the telescopic rail. 2x hand travel unit for manual Ijdpfxozn H Tws Amgeih movement of the telescopic rail 4x set of end stops (stoppers) designed as bolted angles 2x C-rail system / cable management system for supplying power to the electric chain hoist / electric travel unit (no ideal control!) 1x hand trolley, for retracting the telescopic rail. 1x STAHL Crane Systems electric chain hoist ST 1005-8/2 1/1 Manufactured according to the rules of the EC Machine Directive, Device Safety Act, and BGV. Lifting mechanism operating mode according to DIN EN 13001-2: HD1 Motor classification (FEM/ISO): M4 Load-bearing component classification (FEM/ISO): M5 Protection type EN 60529: IP55 Designed for operation in an indoor environment, ambient temperature -20 to +40°C Lifting mechanism load capacity 500 kg Lifting height 8.00 m Lifting speed 2.00 / 8.00 m/min Power (nominal) 0.20 / 0.80 kW Design data, see product information / motor data sheet Duty cycle 20 / 40 % Load chain galvanized Travel unit electric travel unit, short overall height Travel speed 5.0 / 20.0 m/min Power 0.07 / 0.32 kW Duty cycle 20 / 40 % Flange width 200 mm Electrical system Contactor control Operating voltage 400 V Control voltage 48 V System frequency 50 Hz Control unit STH incl. 6.80 m control cable Paint finish Hoist - Topcoat polyurethane 80 µm Topcoat lifting mechanism in RAL 7021 color, black gray Topcoat control box and fan cover in color RAL 6018, yellow-green Note: Overload protection and emergency lowering by slip clutch (must not be operated under normal conditions) Equipment - Travel switch on both sides - Lifting end switch for upper hook position - Guide for cable-mounted power supply, 505 mm - Radio remote control with emergency control unit STH (transmitter Quadrix, receiver FSE308 with integrated horn (91 dB) and signal light, charger, replacement battery, belt clip, adhesive symbols) Documentation: - Installation declaration according to Directive 2006/42/EC for machinery - Test book - Load capacity labeling according to UVV standards - Operating manual for cranes Currently, the crane is disassembled and stored in a hall in Switzerland, near the German border.

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Iisdpjv A Uw Djfx Amgsh Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: excellent (used), Approx. 1500 m² single-story steel platform Used, good condition, see pictures. Manufacturer: STOW Length approx. 58.5 m Width approx. 54.6 m Height (bottom edge) 3.4 m Height (top edge) 3.7 m Load capacity 500 kg/m² C-profile and Sigma-profile construction Fastened with screws and nuts Adjustable grid spacing in length Floor construction is 38 mm chipboard, highly compressed, tongue and groove Underside white, top side gray coated Iiodpfx Ajd S S N Rjmgoh Negotiable price: Offer upon request! Partial sale possible! Dismantled and loaded. Goods are in stock. Transport costs available upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking promptly available • 20,000 m² of warehouse platforms & steel platforms immediately available • 30-50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR ASSORTMENT (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi Cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance orders, we offer a real all-round carefree package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including complete clearance. 2. Commission-based auction: Conducting auctions on behalf of others. Our full service is provided by our own employees: Cataloging, office preparation, inspection, goods dispatch, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: good (used), Year of construction: 2007, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, Manufacturer: Lagun Goratu Type: GBM CM5 Control system: HeidenHain iTNC530 Year of construction: 2007 Specifications: Metric Metric US Standard X-axis 5000 mm Y-axis 1200 mm Z-axis 2000 mm Isdpfsvd Ddcex Amgsih Table length 6500 mm table width 1100 mm Table load 6000 Spindle power 37 kW Spindle speed 4000 rpm Tool holder 50 ISO/Bt/Mk Feed X - axis 20000 mm/min. Feed Y - axis 20000 mm/min. Feed Z-axis 20000 mm/min. Milling head auto index 2.5 x 2.5 ° Working hours 18000 H Dimensions (estimate) length 8400 mm width 6800 mm height 4800 mm weight 34000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: DN231, ABUS ZHB overhead crane system with dimensions approximately 7.8 x 6 m (6 m span) Load capacity / lifting capacity: 500 kg - 0.5 tons Ijdpfx Amoz Tddcjgoih Technical data of the system: Crane system consisting of ABUS HB200 rails with 2 drive units System is delivered complete: HB rails, rail connectors, trolleys, drive units, end plates, supports/hangers, etc. including 500 kg ABUS chain hoist Length of steel structure: approximately 8.5 m Overall width (outer edge of steel structure): approximately 5.2 m Total height of crane: approximately 4.87 m Top of rails: approximately 4.3 m Bottom of rails: approximately 4.08 m Top of bridge: approximately 4.02 m Bottom of bridge: approximately 3.81 m Hook height: approximately 3.7 m Supports: HEB120 with 40x40 cm base plates, rails: INP260 Crane is disassembled and available immediately Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacity: 125 kg - 1600 kg Please request a non-binding quote for your overhead crane system, specifying the load capacity and dimensions.

Condition: used, functionality: fully functional, Available quantity: 9 units “functionally tested; item originates from the dismantling of equipment from an automotive supplier” Manufacturer: Stahl Prüftechnik Type: 2011-SB-GH200-001 Function: Module for expanding testing systems, suitable for leak or functional tests Interface: Sub-D / Bus-compatible Operating voltage: 24 V DC Iisdpjzhnwksfx Amgsh Housing: Aluminum / Laboratory standard

Condition: excellent (used), Year of construction: 2011, functionality: unexamined, overall weight: 2,500 kg, total length: 4,500 mm, total width: 2,000 mm, total height: 350 mm, 2 x white sandwich panel 350 x 2000 x 4500 mm with hydraulically extendable wheels, design type 5 Iiodjwxwcmepfx Amgoh

Year of construction: 1989, condition: good (used), machine/vehicle number: TH2000/9953, DEMAG KBK crane canopy crane runway with dimensions approx. 9x4m (4m bridge) There are multiple copies of this crane! Iiedpfev Iakaox Amgjh Payload / lifting capacity 500 KG - 0.5 tonnes Technical data of the system: Crane runway made of Demag KBK2 rails System is delivered complete: KBK rails, rail connectors, chassis, end plates, brackets/hangers etc. Incl. 500Kg steel chain hoist - lifting height approx. 3.5m Crane is dismantled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by freight forwarder or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are in stock! Other KBK systems are also in stock. Payload 125KG - 1600KG Please enquire about your crane runway with load capacity and dimensions without obligation.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, Steel – Column-mounted jib crane with chain hoist Type PS10-3.5, year of manufacture 9/2000 Load capacity 500 kg Outreach 4.70 m Jib arm 5 m Iiedpfx Aszx Etqemgeh Crane column height 6.70 m

Condition: good (used), total length: 5,000 mm, total width: 2,000 mm, plate height: 350 mm, Manufacturer: ASQUITH Type: DRG Year of manufacture: 1980 Specifications Metric US Standard Length 5000 mm Width 2000 mm Height 350 mm Number of T-slots 8 Distance between T-slots / step 240 mm T-slot size 35 mm Number of matching pieces 1 Dimensions (estimated) Length 5000 mm Iisdpowp Eqyjfx Amgjh Width 2000 mm Height 350 mm Weight 7500 kg Please note: The information on this page was provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms arise from it. We recommend verifying all important details.

Year of construction: 1962, condition: used, machine/vehicle number: 35701, height of centers: Werkstueck- bzw. Schleif-Ø 500 mm distance between centers: ca. 2000 mm max. working piece weight: 1200 kg grinding wheel measures: 600 Ø x 300 mm grinding wheel rotations: 965 Upm electrical connection: 380 V, ca. 15 kW space needed: 2300 x 9000 x 2000 mm weight: 13000 kg Iiedpfxsz Hcto Amgsh

Condition: good (used), total length: 5,000 mm, total width: 2,000 mm, plate height: 300 mm, Manufacturer: STOLLE Type: SDT Year of manufacture: 2000 Specifications Metric US Standard Length 5000 mm Width 2000 mm Height 300 mm Number of T-slots 5 Distance between T-slots / pitch 400 mm T-slot size 36 mm Number of matching pieces 1 Dimensions (Estimated) Length 5000 mm Iiodpfx Amjwp Emzogoh Width 2000 mm Height 300 mm Weight 8000 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent representations or contractual terms. We recommend that you verify all important details.

Year of construction: 1976, condition: used, machine/vehicle number: TH20010161, Demag bridge crane, crane canopy, crane track, indoor crane, crane Payload / lifting capacity max. 10t - 10000KG, track 11750mm Outer dimensions with head carriage approx. 12000mm with steel hoist and floor control Height from top edge of crane to hook approx. 900mm Head carriage length with buffer approx. 3500mm Lifting height of rope hoist 10000mm Crane weight approx. 4000KG incl. 2x 25m guide rails HEB280, incl. conductor rails!!! Beam lengths per side: 1x approx. 10m 1x approx. 15m Support spacing 10m/10+5m Crane is dismantled, immediately available from location 75053 Gondelsheim Used condition ----- Iedpfxov A Sa Ns Amgoih Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred