Used Stierli-Bieger Radial 2500 Cnc for sale (12,487)

Year of construction: 2000, condition: good (used), Technical specifications Nedpfx Ajv Tz I Rsgrewl Capacity: 2100 x 650 mm

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Traversing arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, rear side of machine base • 2 T-slots, 18 mm, left side of machine base • Thread cutting unit • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 Distance between T-slots: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table (min): 70 mm Distance spindle nose – table (max): 680 mm Distance spindle nose – floor (min): 970 mm Distance spindle nose – floor (max): 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacities Drilling capacity (solid): St 60: ⌀ 40 mm GG 22: ⌀ 50 mm Tapping: St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental Measurement units: mm or inch or degrees Interpolation: 2 axes (X, Y) Nwjdpfxoyxw Ddj Agrjl Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram function: yes Machining Cycles Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: cycles for determining reference points by manual probing of the workpiece for: - Arbitrary clamped rectangular parts - Arbitrary clamped round parts - Centering of cast and flame-cut parts - Angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Condition: new, pressure: 100bending length: 2500column width: 2100daylight: 365stroke lenght (max.): 180column throat depth: 300messurements (LxWxH): 3760 x 2150 x 2450weight approx.: 6500motor power: 5,5          Standard equipment: KK-Industries GmbHhas the general agency of the KK Kletzer group of companies. We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by KK Kletzer bursa Turkey Model KK Kletzer Europa Compact The strong press brake KK Kletzer Europa Compact  is characterized by its high precision, accuracy and versatile application. KK Kletzer Europa Compact   press brake distinguishes itself by its high precision, accuracy and versatility. We focus on quality, which is also reflected in the control system. As standard control we have the high-quality controls from Italy 10 2 D with simplest programming Furthermore, the press brake KK Kletzer Europa Compact  is equipped with Y1, Y2, X CNC axes via the control. Even with the top tool and the die we make no compromises and equip the CNC press brake KK Kletzer Europa Compact   with quality tools from EUROSTAMP Italy. or Rolleri Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. CNC axes Y1, Y2, X Nodpsd Iy Tvjfx Agrewl Control 2 D 10 Backgauge with double linear guidance and ball screw centrally adjustable crowning device 2 pcs Aulfagearme front heavy version Height adjustment on linear guide Laser protection device on the upper beam CE protection options: CNC R-axis     EURO 4.300,- CNC crowning EURO 2.600,- Distributed by: KK-Industries GmbH Tel: 0043 (0)664 380 7776 There's something for everyone!

Condition: new, pressure: 60bending length: 2550column width: 2100daylight: 550stroke lenght (max.): 270column throat depth: 450messurements (LxWxH): 3220 x 2250 x 2560weight approx.: 5200motor power: 5,5 Nwsdpfx Agod I Annjrel

Condition: excellent (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, empty load weight: 8,000 kg, machine base height: 3,940 mm, spindle motor power: 4,000 W, milling length: 5,920 mm, Döküm Gövde (LCD) Dokunmatik ekran ve CNC-Kontrol unitesi Otomatik CNC- Rektefiyeleme sistemi İnterpilasyon işlemi ile otomatik silindir rektefiyeleme özelliği (Opsiyonel) X-Y-Z Eksenler AC/Servo motor kontrol Elektornik el çarkı X-Y-Z eksenleri için (Hız ayarlı) Hassas elektronik cetvel (X,Y,Z eksenler) Silindir rektefiye ve Yüzey tarama işlemleri similasyon özelligi (Opsiyonel) Hareketli rektefiye başlığı değiştirme robotu (Opsiyonel) Fener mili aşağı ve yukarı hareketi hız ayarlı Elektonik hız ayarlı fener mili (Elk.El çarkı ile fener mili kontölü) Yüzey tarama sırasında tabla hız ayarı değiştirme sistemi Hareketli LED aydınlatma sistemi. Hazır katerli elmas sistemi Dik sütun kızak koruma perdesi Dik sütun(Z-Eksen) V kızak sistemi Tabla kızakları(X-Y eksen) Linear Kızak ve otomatik yağlama sistemi. Elektrik paneli iç aydınlatma Rektefiye başlığı bilyali sistem Fener mili aşağı ve yukarı hareketi bilyali vidali mil ve otomatik yağlama Tabla ileri-geri ve sag-sol hareketleri bilyallı vidali mil ve otomatik yağlama(X-Y Eksenler) Zaman ayarlanabilir otomatik yağlama sistemi Elektonik el çarkı Hız ayarlı ve 3 eksen kontrollü (X,Y,Z) Nwodpfx Agoxpwfaerjl İnternet Erişimi ve uzaktan erişim İndustry 4.0 uyumluluk Dik sütun servis merdiveni

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 Njdpfx Asyahv Sogrjwl CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: new, pressure: 63bending length: 2500column width: 1980motor: 11slide stroke - max.: 150opening width: 400CNC Press break KK Industries 63x2500 4 Axis Y1-Y2-Y-X-R mit CNC Bombing Technical Parameters:Pressing Force: 63 t Bending Length: 2500 mm Distance Between Columns: 1980 mm Throat Depth: 300 mm Slider Stroke: 150 mm Maximum Opening: 400 mm Slider Down Speed: 180 mm/s Slider Return Speed: 170 mm/s Slider Working Speed: 14 mm/s Main Motor Power: 11 kW CNC System: ZY68 Number of Control Axes: 4+1 Oil Tank Capacity: 150 L Back Gauge:X-Axis:X-Axis Travel: 600 mm X-Axis Speed: 200 mm/s Positioning Accuracy: ±0.10 mm Repeat Positioning Accuracy: ±0.015 mm Motor Power: 0.85 kW R-Axis:R-Axis Travel: 150 mm Nwodsv Trgqepfx Agrol R-Axis Speed: 100 mm/s Positioning Accuracy: ±0.10 mm Repeat Positioning Accuracy: ±0.015 mm Dimensions and Weight:Length: 2750 mm Width: 1350 mm Height: 2320 mm Weight: 4000 kg Delem T53 Control System (additional cost 5,000¤)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 80 t, stroke length: 120 mm, table length: 2,500 mm, throat depth: 250 mm, distance table to ram: 385 mm, clearance between the columns: 2,000 mm, oil tank capacity: 160 l, total length: 2,600 mm, total width: 1,450 mm, total height: 2,300 mm, overall weight: 4,800 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic CNC Servo Press Brake MTP 80X2500 with MTP-3212 Controller – In Stock The MTP 80X2500 is a hydraulic CNC servo press brake designed for accurate and efficient sheet-metal bending. The machine delivers a pressing force of 80 tonnes and offers a maximum working length of 2,500 mm. It is suitable for processing sheet metal up to 4 mm thick. The machine is equipped with two controlled axes: * X-axis – servo-controlled back-gauge positioning * Y-axis – servo-controlled ram movement The MTP-3212 CNC controller features a large colour touchscreen and a clear, intuitive operating menu. Its software automatically calculates the required bending angle, helping simplify machine setup and improve production efficiency. The controller can store data for up to 40 different punch types. The machine is fitted with an AMADA-style quick-clamping system, enabling fast and convenient tool changes. Two front material supports are included. High-quality components ensure reliable operation and a long service life. The hydraulic system uses a renowned German Rexroth valve, while the electrical system incorporates Schneider components. Safety components are supplied by Omron and Schneider. Steel hydraulic connections help minimize the risk of leakage. For comfortable operation, the press brake is equipped with a mobile control unit and a controller mounted on an adjustable arm. Integrated LED lighting provides excellent visibility throughout the working area. The machine includes extensive safety equipment, such as side guards, a rear safety gate, easily accessible emergency-stop switches and a safety light barrier. The light barrier helps prevent accidental access to the area between the punch and die during operation. A Polish-language operating manual and a CE declaration of conformity are included. Technical support is also available to assist with tooling selection, material selection, bending sequences and the configuration of suitable operating parameters. Technical specifications: * Pressing force: 80 t * Maximum working length: 2,500 mm * Maximum sheet thickness: 4 mm * Controlled axes: X and Y * Distance between columns: 2,000 mm * Throat depth: 250 mm * Ram stroke: 120 mm * Maximum opening height: 385 mm * Back-gauge travel: 600 mm * Motor power: 5.5 kW * Overall weight: 4,800 kg * Dimensions (L × W × H): 2,600 × 1,450 × 2,300 mm * Front material supports: 2 * Punch clamping: AMADA-style quick-clamping system Nwodpfx Agszrl Nlorjl * CNC controller: MTP-3212 * Safety light barrier: Yes * CE marking: Yes * Documentation: Polish-language operating manual The machine is currently in stock and available for prompt dispatch. Delivery can be arranged throughout Europe and to destinations beyond Europe. Transport costs are calculated individually and depend on the delivery destination. Please contact us with your delivery address or postal code to receive a transport quotation.

Condition: new, Spare parts category: safety mat for CNC Allen Bradley Lignum 1600x 800 Brand: safety mat for CNC Allen Bradley Lignum 1600x 800 Model: safety mat for CNC Allen Bradley Lignum 1600x 800 Description: safety mat for CNC Allen Bradley Lignum 1600x 800 Allen Bradley Lignum CNC safety mat new, thickness: [value missing] series: 440-F, range: MatGuard, length: 1.5m, width: 1m, thickness: 16mm, Plastisol vinyl, IP67 Allen Bradley protective mat, length 1.5 m, width 1 m - 440F-M2030BYNN The Allen Bradley series MatGuard safety mat from Rockwell Automation is a safety device that detects human presence in hazardous areas. It can be connected to the control circuits of industrial machinery in hazardous environments, creating a protected area of 1.5 m (length) x 1 m (width). When the mat's detection surface senses a person, it sends a signal that shuts down the machine, preventing injury and increasing workplace safety. The durable vinyl material is resistant to bleach, acids, and other industrial chemicals, making it a suitable choice for use in demanding industrial settings. This mat is commonly used to restrict access to hazardous areas in factories. Features and advantages: • Hardened sheet steel construction increases durability. • 4-wire open and short-circuit detection system for enhanced electrical safety. • Can withstand a high static pressure of 4,500 psi (pounds per square inch) for use in heavy-duty applications. Standards and certifications: Nwsdpfx Ajz Eggvjgrsl • CSA (Canadian Standards Association) • ISO13849-1 (International Organization for Standardization) • IEC/EN60204-1 (International Electrotechnical Commission) • TÜV (Technischer Überwachungsverein) Is this mat safe to use in damp or wet areas? IP67 rating CE certified TUV certified CSA certified cULus approved EN1760-1 EN954-1 ISO 13849-1 IEC/EN60204-1 ANSI RIA R15.06 ANSI/B11.19 AS4024.5 The mat is rated IP67 (ingress protection), meaning it is protected against dust and can be water-resistant for up to 30 minutes. This makes it safe for use in humid environments. Technical specifications: Attribute Parameter MatGuard Range 440-F series Protected area 1500 x 1000mm Length 1.5m Width 1m Thickness 16mm Mat material Plastisol vinyl IP rating IP67 Year: 2023

Condition: excellent (used), Year of construction: 2012, - 3-axis CNC center SCM Pratix S - model PRATIX 12B from 2012. - Range X, Y, Z axes: 2500x1250x150+ mm - Number of tool spaces in the magazine: 8 - Machine table: Raster aluminum table, 2 sections. - Control: PC control - Software: SCM NESTING, SCM XILOG MAESTRO - Serial no.: AH/115920 Number of milling axes: 1 Drilling unit: 1 - practically unused Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Main engine: 6.6 kW Table measurements: 130 cm x 260 cm Portal construction: Machine with movable portal Vacuum pumps: 2 pcs. BECKER from 2012 - one placed outside, the other installed in the machine. Vacuum pump capacity m³/h: 240/280 m³/h. Interface for reading CAD format (.dxf) Security: Rejects Weight approx. 2,500 kg Nodpfx Asuu Ntgsgrjwl Length: 5,900 mm Width: 2,790 mm Height: 2,190 mm Automatic tool length measurement Location - Poland

Condition: used, Year of construction: 2021, functionality: fully functional, operating hours: 2,460 h, number of axes: 4, number of slots in tool magazine: 6, actuation type: electric, table length: 15,000 mm, table width: 1,000 mm, Equipment: CE marking, For sale: CNC milling plotter Sentinel E 1015, purchased for wood milling applications. In practice, the machine was used exclusively as a cutting machine for corrugated cardboard. It was not used for heavy-duty wood or metal processing, and its components were not subjected to loads associated with such milling. Technical and visual condition: excellent. Condition and usage history as declared by the seller. P A R A M E T E R S / S E T C O N T E N T S Specifications and equipment ATC spindle, linear tool changer, and vacuum table with rotary vane pump. Working area X: 1000 mm / Y: 1500 mm / Z: 300 mm Kinematics: Linear guide Linear transmission: Structural rocker system ATC spindle: Power 8–9.6 kW; automatic tool change Spindle parameters: 24,000 rpm; ceramic bearings; ER 32; ISO 30 Tool changer: Linear, for 6 tools Drives: Digital AC servo drives: 4 × 400 W Vacuum table: HPL plate Machining technology: HSM (High Speed Machining) Measuring systems: Material height sensor; tool length sensor Tool cooling: Compressed air Material clamping: 3-pin clamping system Control: Control cabinet with computer, keyboard, and mouse Tools and accessories included Tool holders: Complete set of 6 ISO 30 tool holders ER 32 collets: Ø 3, 4, 6, 10, 12, and 16 mm Nwsdpfoz Drmxex Agrol Table accessories: Vacuum table seals: 30 m; 2 vacuum table supports Rotary vane vacuum pump included Model: C-VRL 301 Zephyr¹ Motor power: 5.5 kW Nominal capacity: 290 m³/h Final pressure: 150 hPa (mbar) ¹ Designating the pump according to the provided specifications; to be confirmed on the nameplate. M A T E R I A L S / M A C H I N E D E T A I L S Range of applications Machining capabilities depend on the tool used, material thickness, operating parameters, and machine configuration. Wood and wood-based boards: Wood, plywood, OSB, MDF, HDF. Metals: Aluminum, brass, bronze, and other metals, depending on the selected machining technology. Composites and technical boards: Composites, conglomerate, Corian, HPL, Dibond. Plastics and modeling materials: Prolab, polyurethane foam, polystyrene, expanded PVC, Plexi, polycarbonate, acrylic. Materials for cutting with an oscillating head² Technical polyurethane foam, sponge, cardboard, corrugated board, film, leather, fabric, rubber, plastics; Kryngielit, Gambit, Polonit, and other materials and boards.

Condition: excellent (used), For sale: Professional KEYENCE IM-7500 measuring system with IM-7020 head. The device is designed for fast and highly precise measurement of components in production and quality control. The equipment enables automatic measurement of multiple dimensions simultaneously using a camera. Ideal for CNC workshops, tool rooms, and industrial applications. Technical data Manufacturer: KEYENCE Model: IM-7500 Head: IM-7020 Nedpfx Ageyvv Trerowl Type: Optical measuring system Country of origin: Japan Automatic measurement by camera High measurement accuracy Condition Used Fully functional Normal signs of use Included in the set KEYENCE IM-7500 unit IM-7020 head Monitor Control unit Keyboard and mouse Wiring

Condition: like new (used), Year of construction: 2019, tube diameter 28 mm wall strength 2 mm bending radius min. 90 mm control 3D TubeSoft Slim total power requirement 3,5 kW Nsdpjxcuhrjfx Agrowl

Condition: excellent (used), 5-axis Year of production: 2018 Machine working area dimensions for the X and Y axes: X 2100 mm Y 3100 mm Nwsdpfxjun Rqge Agrol Head stroke in the Z axis: 1250 mm Machine travel speed X, Y. Z: X: 80 m/min Y: 80 m/min Z: 12 m/min HITECO spindle in the HSK 63F standard Price of a new machine: approx. 135.000 €

Year of construction: 2009, condition: used, machine/vehicle number: WW12698, Product Information "Radial Medium-Pressure Fan" Radial Medium-Pressure Fan Type/Model: Elektror RD 64 Condition: Used, very good Technical Data Volume Flow max.: up to 142 m³/min Pressure max.: up to 10,600 Pa (total pressure increase) Motor Power: 1.5 kW Nodpfx Ajzm N Nxjgrjwl Dimensions: approx. 600 x 440 x 720 Weight: approx. 42 kg Inquiry Item: Shipping costs will be provided in an individual quote.

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 2190, functionality: fully functional, operating hours: 3,500 h, 5 axis cnc used for many applications with new touch screen set up and adopted to new air cooled spindle, tool changer and renishaw possible Nedpfxezhaqcj Agrjwl

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Year of construction: 2025 Condition: Showroom Specifications: - X-axis: 4000 mm - Y-axis: 1000 mm - Z-axis: 1000 mm - 26 kW (S6) main motor - 8000 rpm - BT-40 - Automatic tool changer (24 positions) - Remote service (IXON) + network connection - Stronger coolant pump incl. spray gun Nodpfow Ty S Sjx Agrowl - Upgraded to the latest STYLE software available

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, overall weight: 16,000 kg, power of feed motor: 37,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 Spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12–120 m/min, Spindle configuration: 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) 3- Left (11 kW) Njdpsx Svm Rofx Agrjwl 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Base supports, height 320 mm, for a table height of 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, CUT 2530S - Variable CNC Machine EPS cutting machine with 4 independent moving axes and Nodpfx Ajwfdm Eegrowl variable machine table.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, input voltage: 380 V, input current: 13 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 50 t, overall weight: 50,000 kg, working width: 2,500 mm, For sale is a GÉFI LE50/2500, Hungarian-made edge bender in excellent condition, in working condition, can be tested. Technical data of the pres brake : Nsdpeyznhljfx Agrjwl Manufacturer: GÉFI Type: LE 50/2500 Year of manufacture: 1983 Pressing force: 50 tons Maximum bending length: 2500 mm Dimensions: 2720x1550x2245 mm Weight: 5500 kg We are adding 1 1500 mm and 1 2500 mm knife, these need to be renovated.

Condition: used, Year of construction: 2005, SPACESACER SS2101 rod feeder Nwedpfxowcgdns Agrol year 2005 used - efficient

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: MACH1097, For sale is a reliable and precise grinding machine from the leading French manufacturer, Forézienne (MFLS), designed for the automated and high-quality sharpening and profile restoration of band saw blades. Thanks to its precise CNC control, the machine ensures uniform geometry of the saw teeth, extends the service life of the cutting tools, and significantly reduces setup time. The machine is ready for industrial use, well-maintained, and suitable for both sharpening centers and the woodworking industry. Nwjdpfx Agezxpkmorel

Year of construction: 2023, operating hours: 5,027 h, condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, We are offering this very well-maintained Halter CNC Automation Millstacker Premium 25 handling robot for CNC milling machines, year of manufacture 2023, with very low operating hours. Custom modifications deviating from the standard model that were carried out for us: 1. An individual deposit position (in our case, onto a chute into a water bath) was added as an option. This setup also allows all 12 stacking positions to be loaded with raw parts—whereas when depositing onto the table, only 11 stacking positions can be loaded with raw parts. 2. Customized adjustment of the angular alignment in the magazine. As a result, longer/larger parts can also be placed lengthwise between the bars when diagonal placement is no longer possible. 3. An additional set of longer support bars was manufactured to securely position larger parts. Nwodpfx Agoy Nmmijrjl If you have any questions or require more information, please feel free to send us a message or call us.

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Nwsdpep U Umkofx Agrel

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Njdpfx Ajq U R T Nogrewl Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg