Used Tubend Hp 20 for sale (32,565)

Condition: good (used), Year of construction: 1975, functionality: fully functional, Veneer Press - 3300 x 1350 mm - External dimensions: 4000 x 1650 x 2450 mm - Year of manufacture: 1975 - Approx. 5,500 kg Ledpfx Aox Akuzskyehf - Electrically heated plates, no dents - HP 120 - Pressing room height: 400 mm - 6 cylinders - Rack guide - With emergency cord Shipping available at extra cost!

Condition: good (used), machine/vehicle number: R020344A, operating hours: 953 h, lifting height: 3,050 mm, fork length: 1,200 mm, Unladen weight: 2,070 kg Lifting capacity: 2,000 kg Technical condition: good Lhodpfxjywap Ts Akyof Please contact Vitali Lenda for further information.

Condition: used, Year of construction: 2012, operating hours: 7,500 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 1,500 kg, input voltage: 400 V, total width: 4,000 mm, total height: 2,000 mm, total length: 8,000 mm, cutting height (max.): 110 mm, track width: 2,950 mm, Equipment: documentation/manual, Selling an Oerlikon plasma cutting system, Plasmatome 20 HPC, Nertajet HP 300 plasma source with CPM 400/450 torch heads for aluminum, steel, and stainless steel. Cutting range 2 x 6 m, cutting current 30-260 A, power consumption 80 kVA. Material thickness of the sheets to be cut with piercing up to 35 mm, external thickness up to 50 mm. Sold without cutting table. Ledpfev I U Hcjx Akyehf

Condition: refurbished (used), Year of construction: 2015, operating hours: 20,640 h, functionality: fully functional, overall weight: 24,500 kg, total width: 2,500 mm, Completely overhauled machine Single-shaft shredder, particularly suitable for secondary shredding and granulation of pre-shredded materials. Lhodpfxsyu Unds Akyof Application: Commercial waste for thermal or material recycling, e.g., paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Komet 2200 HP, overhauled in March 2026 Year of manufacture: 2015 Control cabinet with ABB frequency converter, dust-tight with recooler Control panel: complete Drive motors: ABB 2x200 kW Paintwork new / RAL: 5003/7001 Rotor bearings/pull-off sleeve/shaft seals: new Hydraulic unit: complete Total weight approx. 24.5 t Dimensions (LxWxH) mm: 5800 x 2500 x 3100 mm Inspection and trial run/test run possible by appointment. Delivery time: immediate

Condition: as good as new (ex-display), Year of construction: 2021, input current: 81 A, input frequency: 60 Hz, type of input current: three-phase, total length: 1,830 mm, total width: 1,618 mm, total height: 2,400 mm, overall weight: 5,000 kg, operating temperature: 140 °C, cylinder diameter: 65 mm, opening width: 100 mm, Shelf press for veneer , plywood , MDF, particle board, solid wood, etc. Manufacturer : JOOS Model: HPS 20 year of production 2021 Total pressure force : 200 kN 4 cylinders ⌀ 65 mm x 400 mm Maximum hydraulic working pressure : 150 bar Pressure : 2.0 daN / cm2 5 heating plates size : 1000mm x 1000mm Operating temperature : 0℃ - 140℃. Infinitely adjustable temperature. Lodpjt Eq E Sofx Akyjhf Timer to set the working time , after the set time the press automatically opens. Heating power - 5 x 12 kW Total power - 64 kW (81A , 60Hz) Weight - 5000 kg Press new - never used Full technical documentation included.

Condition: used, machine/vehicle number: IC1113, Year of construction: 2014, operating hours: 6,912 h, load capacity: 2,000 kg, lifting height: 200 mm, load center: 800 mm, fork length: 1,600 mm, overall weight: 770 kg, enginetype: Electric, manufacturer: Jungheinrich Lhjdpfew Un Htox Akyof

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Used upsetting press with inductive heating, for solid material diameter: 12 mm - 60 mm Manufacturer: GFU Model: HP 200 Year of manufacture: 2009 Serial no.: 09/1025 with extensive accessories Ledpfxoycl Ide Akyjhf

Condition: ready for operation (used), Year of construction: 2018, travel distance Z-axis: 305 mm, total height: 2,692 mm, overall weight: 2,041 kg, number of axes: 3, This 3-axis OMAX MAXIEM 2030 30 HP AJet was manufactured in 2018, featuring a CNC Waterjet Cutting System with a 5-axis cutting capability. It includes a robust 30 HP pump, MAXJET® 5i cutting head, and a cutting envelope of 3,061 mm by 2,019 mm. Ideal for high-precision applications, it supports a maximum material load of 1,465 kg/m². Consider the opportunity to buy this OMAX MAXIEM 2030 waterjet cutting machine. Contact us for more information about this machine. • Work envelope / cutting table: • Cutting X-axis travel: 10’ 0’’ (3,061 mm) • Cutting Y-axis travel: 6’ 7’’ (2,019 mm) • X-axis table size: 12’ 2’’ (3,708 mm) • Y-axis table size: 7’ 0’’ (2,134 mm) • Material support slats: 4’’ × 14 ga galvanized steel (102 mm × 2 mm) • Performance: • Traverse speed: 500 in/min (12,700 mm/min) • Repeatability: ±0.001’’ (±0.025 mm) • Accuracy: ±0.003’’ (±0.076 mm) • Pump & cutting head: • Pump power: 30 HP • Cutting head: MAXJET 5i with A-Jet (5-axis cutting) • Nozzle life: Diamond orifice, approx. 500 hours (guaranteed) • Dimensions & weight: • Operating weight: 20,500 lb (9,299 kg) • Overall height: 8’ 10’’ (2,692 mm) Lhsdjya Ecijpfx Akyef • Footprint (without controller): 14’ 1’’ × 14’ 1’’ (4,293 × 4,293 mm) • Slat bed: • Standard configuration: 34 slats • Maximum slat configuration (optional): 117 slats • Maximum material load: 300 lb/ft² (1,465 kg/m²) • Standard features: • Intelli-TRAX abrasive-jet linear drive system (1 micron resolution) • Brushless servo motors and drives • Abrasive feed system (15 lb capacity) • Rugged catcher tank (300 lb/ft² load capacity) • Industrial steel protection covers on X-axis • Modular bridge control and power centers • Low-noise pump and system design • Windows-based control system • IntelliMAX Standard Software (2 seats) • Mobile control station with widescreen display • No special foundation required • Ergonomic full table access • Made in the USA

Condition: new, Bernardo workshop press 20 WK FH Pro Technical specifications Pressure force 20 to Piston stroke 185 mm Ledpfxjd Du T Re Akyjhf Table width 170 mm Passage (S) 510 mm Through (F) 130 mm Distance from cylinder - table (F1) 40 mm Distance from cylinder - table (F2) 965 mm Cylinder movable (M) 175 mm Width (A) 730 mm (B) depth 560 mm 1 (C) height 1525 mm Height 1630 mm 2 (D) Weight approx. 112 kg Properties • Fitted with sliding left and right cylinders • To align, presses, bending, assembling gears, disks, etc. • Fitted with foot pedal and hydraulic • hand pump for delivering piston • Standard Edition Prism to shaft alignment • Standard equipment with automatic piston return through integrated return spring • Height-adjustable table with locking bolts • Large dimensioned pressure gauge to read pressure • including two-stage hydraulic pump • Sturdy construction with welded steel frame

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, GF AgieCharmilles FORM 2000 HP Year of manufacture: 2012 C-frame design, fixed table with lowering tank Travel (X/Y/Z): 400 x 300 x 350 mm Table to quill distance: 170-520 mm Max. workpiece size (L x W x H): 820 x 580 x 250 mm Max. workpiece weight: 800 kg Integrated C-axis for rotation, indexing, and EDM (U=0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) ISPG generator with 60 Amps Best attainable surface finish: Ra 0.10 µm AGIEVISION 5 control interface 15” LCD color screen, mouse or touchscreen, lift keyboard, and manual control unit Including EROWA ERC 80 robot - Electrode changer - Pallet changer Net weight of the machine: 3,830 kg Machine dimensions: 1,410 x 2,460 x 2,660 mm Upon order confirmation, the machine will be cleaned, serviced, and tested by us. Optional: - Commissioning and training - Transportation and installation Lhodpfxjyniyue Akyjf - Cooling unit - Dielectric fluid

Condition: new, mileage: 9,863 km, power: 382 kW (519.37 HP), first registration: 12/2024, fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,500 mm, loading space width: 2,480 mm, loading space height: 1,300 mm, Year of construction: 2024, operating hours: 699 h, Equipment: AdBlue, crane, = Additional Options and Accessories = - PTO = Further Information = Technical Information Transmission: MAN TipMatic 12.28 OD, automatic Front axle 1: Steered Front axle 2: Steered Weights Unladen weight: 29,275 kg Payload: 7,725 kg Gross vehicle weight: 37,000 kg Functionality Mast: Telescopic (15 sections) Mast length: 37.5 m Lifting capacity: 30,000 kg Superstructure brand: EFFER iQ.1400 HP-9 CRANE + JIB 260Q-6 + WINCH CE marking: yes Condition General condition: very good Technical condition: very good Visual condition: very good MAN TGS 35.520 FLATBED WITH EFFER iQ.1400 HP-9 CRANE + JIB 260Q-6 + WINCH | DEMO TRUCK!!! EURO 6 L-PACKAGE 520 HP DRIVE 8X2H-6 LEAF-/AIR SUSPENSION 1st AXLE LOAD 9,200 KG 2nd AXLE LOAD 9,200 KG HYDRODRIVE, STEERABLE 3rd AXLE HY-1350, AXLE LOAD 13,000 KG 4th AXLE LOAD 9,000 KG, STEERABLE AND LIFTABLE TGS SLEEPER CAB WITH CLIMATRONIC AIR CONDITIONING ADDITIONAL WATER HEATER 6 KW VENTILATION CANNOT BE SWITCHED OFF, REDUCES DUST DEPOSITION MULTIFUNCTIONAL LEATHER STEERING WHEEL, HEIGHT AND ANGLE ADJUSTABLE STEERING WHEEL WITH PARKING POSITION STEERING LOCK WITH ELECTRONIC IMMOBILIZER PROFESSIONAL INSTRUMENT PANEL 12.3 INCH 2 SOCKETS 12V AND 24V 230V SOCKETS, 2 USB PORTS MAN EASY CONTROL LONG HAUL PANEL WITH 4 FUNCTIONS SIDE CAMERA Lodpfx Aoyiukzskyshf ELECTRIC SUN BLIND FOR WINDSHIELD (INTERIOR) FOLDABLE TABLE ON PASSENGER SIDE EXTENDABLE COOL BOX AND STORAGE BOX IN CENTER CONSOLE ELECTRONIC STABILITY PROGRAM (ESP) TRACTION CONTROL (ASR) AUTOMATIC VOICE RECOGNITION VIA DRIVER CARD CRUISE CONTROL (FGR) LANE DEPARTURE WARNING (LDW) ATTENTION ASSISTANT MAN ATTENTIONGUARD TRAILER COUPLING, CARGO AREA 450 CM LONG, 248 CM WIDE, +/- 130 CM HIGH EFFER iQ.1400 HP-9 CRANE + JIB 260Q-6 + WINCH MAIN BOOM 9X HYDRAULICALLY EXTENDABLE JIB 6X HYDRAULICALLY EXTENDABLE RADIO REMOTE CONTROL MAX. LIFTING CAPACITY AT 3.2 M 30,000 KG MAX. LIFTING CAPACITY AT 35.4 M 500 KG MAX. LIFTING HEIGHT 37.5 M 6X OUTRIGGERS, INCLUDING 2X FRONT OUTRIGGERS FOLLOW US NOW ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: used, Year of construction: 2012, Horizon Used Booklet Making System VAC-100a + VAC-100m + ST-40 + SPF-200A + FC-200A + HP-200A (2012) Configuration: Collator VAC-100a Collator VAC-100m Stacker ST-40 Stitcher & Folder SPF-200A Punch Unit HP-200A Trimmer FC-200A Conveyor PK-30 Lhodpfjywd Hcsx Akysf

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 08020115, input voltage: 400 V, input frequency: 50 Hz, Sausage production line Stuffer Brand Vemag Model HP 12E Year of production 2016 Power 16kW Voltage 400-460V 27A 3~50/60Hz Portioner Lhjdevztr Dspfx Akyef Brand Vemag Model LPG 209 servo Dimensions 1800X850X1400 Hanger Brand VEMAG Model AH212 Dimensions 4500X800X1500

Year of construction: 1995, condition: ready for operation (used), Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible. Lhsdpfx Aetva Dnekyjf

Condition: good (used), Year of construction: 1987, fabric-no. 202 395 working length 2550 mm Lhodpfxjq Awh Re Akyef output 2000 KN tracking travel 13 mm safety distance 176 mm

Condition: refurbished (used), Year of construction: 2016, operating hours: 3,660 h, load capacity: 2,000 kg, lifting height: 122 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,500 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 682 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION. Our forklifts are comprehensively refurbished according to FEM-4.004 and current safety standards – ensuring maximum quality and safety for you. From the chassis to the battery, including drive system, brakes, steering, and electrics – every vehicle undergoes thorough inspection and reconditioning. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after the purchase Test on site and get expert advice – we’ll find the right solution for you. Industrial Truck Data: Manufacturer: Jungheinrich Model: Order Picker ECE 220 HP Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2016 Operating hours: 3,660 Lift height: 122 mm Mast type: None Free lift: No Initial lift: Yes Overall length: 2,550 mm Overall width: 800 mm Overall height: 1,500 mm Fork length: 1,150 mm Unladen weight: 682 kg Load centre: 600 mm Tyres: Polyurethane Model type: ECE 220 HP Battery type: PzS Lhsdpfx Aexwqinskysf Voltage: 24 V Battery weight: 380 kg Charger: On request Cabin features: Elevating operator platform

Condition: new, pressure 20,0 t stroke 185 mm table surface area 170 mm Breite column travel between the guideways 510 mm weight of the machine ca. 112 kg dimensions of the machine ca. 1630 x 560 x 730 mm Furnishing: - Standard with pressure cylinder that can be moved to the left and right - For aligning, pressing, bending, assembling gears, discs, etc. - Standard with foot pedal and hydraulic hand pump for piston delivery - Standard with support prism for aligning shafts - With automatic piston retraction by integrated return spring as standard Ledpfx Akexaapcsyjhf - Height-adjustable press table with locking bolts - Large manometer for reading the compressive force - Including two-stage hydraulic pump - Robust construction with welded steel frame

Condition: new, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 540 8x2 with EFFER Crane Truck: • FH 8x2R NLA air suspension • Application cycle: Long-distance transport • Predominantly flat topography • Gross combination weight, technical: 60 t (observe towing capacity of drawbar coupling!) • Rear-view mirrors for body width 2600 mm Main Components • Chassis height: MED (medium) • Trailing axle, electro-hydraulically steered, single tyres • Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle • Globetrotter safety cab FH • Wheelbase: 4,900 mm • Emissions according to Euro 6, with SCR, particulate filter, and exhaust gas recirculation • Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm • Volvo Engine Brake+ (VEB+) (meets ADR braking regulations) • I-Shift AT2612, automated 12-speed gearbox (direct drive), max. input torque: 2,652 Nm • Liftable axle • Rear axle RSS1370C, axle load 13 t, GCW 70 t, differential lock • Drive axle ratio 3.08:1 Chassis • Air suspension on front axle(s) • Lifting on front axle air suspension: Basic (more ground clearance, reduced lift range) • Front axle load max. 20 t (technical) for double front axle Lhodsx Rk Dnepfx Akyef • Rear axle load max. 23 t (technical) • First trailing axle 10.0 t • Volvo Dynamic Steering (VDS) including Stability Assist • Disc brakes, solid discs • EBS, Electronic Braking System, Medium package • AGM batteries, 2 x 210 Ah • 275 l fuel tank, left (plastic) • AdBlue tank, usable capacity 57 l (between the front axles) Trailer / Coupling • Rockinger 400 G-150 drawbar coupling (observe D-value/max. trailer load!) • Electrical connection for semi-trailer/trailer, 15-pin (ADR possible) • Duomatic coupling Wheels and Tyres • Dura-Bright EVO aluminium rims (polished) • FA Tyres 385/65R22.5 (Continental Conti Eco HS5, 3PMSF) • DA Tyres 315/80R22.5 (Continental Conti Eco HD5, 3PMSF) • NLA Tyres 385/65R22.5 (Continental Conti Eco HS5, 3PMSF) • Tyre pressure monitoring with internal sensors Crane • Effer E-9 Jib.155Q-6 JDC • JIB • Winch Body • All necessary chassis work for crane installation, including vehicle frame modification. • Compliance with body builder guidelines of the relevant chassis manufacturer for all work. • Complete installation of a specially developed auxiliary frame from high-tensile steel. • Welded and bolted auxiliary frame for high torsional rigidity and optimum stability (unique feature). • Supply/installation of front support legs • Assembly/bolting of the crane and main support, including installation of all hydraulic and electrical connections. • Usable as a tractor unit via removable/sliding Jost fifth wheel (JOST JSK SL), superstructure removable. • Removable flatbed body as high-profile welded steel construction (approx. 4,250 mm x 2,480 mm, A-dimension open). • Flatbed equipment: Container locks, Multisafe/Multifix stanchion pockets and retractable lashing eyes (2,500 daN / 6,500 daN). • Removable aluminium drop sides and rear underrun protection (extendable) incl. additional/front support. Further information on request.

Condition: new, Oil tank capacity: 12Bending capacity: (Flaches Material) 200 x 12Bending capacity: (Runde Rohre) 48 x 4,0pressure: 20working speed: 10Return speed: 10motor: 2.2table area: 480 x 1060working height: 930length: 1150width: 480heigth: 1200stroke: 185weight approx.: 530 UZMA hydraulic horizontal presses with multi-directional feature, pipe, flat bar, profiles, bars, such as all kinds of materials allows us to perform a large number of different operations such as bending, punching, straightening etc. With the fast die changing system, you can quickly bend materials like sheet, pipe, profile and rod with suitable molds without wasting time. Versatile operation feature and easy usage makes UZMA Lhjdpfx Aer I H A Aekyef horizontal press machine an essential machine for metalworking shops Standard Accessories: - Steel frame & robust machine design  - Stroke adjustment by digital read out  - Manual or automatic working system  - Easy to change the die by quick change  - Durable construction of tools and tool guides made of high quality and hardened steel  - Foot pedal with digital display and emergency stop switch  - 1 set of pressbrake tooling

Condition: used, Year of construction: 1996, Technical details: cutting range for steel to: 25 mm Ampere: 2 x 120 A ( 2 verfügbar) Plasma cutting system with possible welding processes: - Plasma cutting, flame gouging; TIG (TIG) on all metals and alloys; MIG on light metals and alloys and heavy metals as well as arc welding Description: - Power source: Nertajet HP 120 (220V,24V,380V,415V,440V,500V) multiple frequencies 50/60Hz ( 2 pcs available price per piece) - Torch: CPM 250 (flat electrode) 1 pc available i.D. * Lhedpfxeu Nwxns Akyjf

Condition: used, Year of construction: 2009, THIMON Automatic Pallet Hooder LIGNE CPHP 2000 Manufacturer Thimon – Savoie Hexapole, Rue Louis Armand, BP 69, 73420 Méry, France Type Industrial automatic pallet hooder (film hood application with roll unwind) Industrial Applications Automatic hooding of pallet loads at end-of-line to stabilize, protect, and secure pallets before shipping. Used on production and logistics lines in food, beverage, chemicals, cosmetics, and FMCG industries. Main Technical Specifications - Type: LIGNE CPHP 2000 - Year of manufacture: 2009 - Registration / ID: 507304 - Compliance: CE Ledpsx N Utqefx Akyehf Machine Usage The LIGNE CPHP 2000 automates the application of a film hood over a full pallet load. The pallet is conveyed into the hooding area, the hood is formed and applied around the load to ensure pallet stability, protection against dust and moisture, and consistent handling and transport performance. Features / Differentiators - Large-format film roll unwind system suited for industrial throughput and high-volume pallet loads - End-of-line integration with pallet conveying and guarded safety area - Clear traceability for service and spare parts through ID 507304 and type LIGNE CPHP 2000

Condition: used, Year of construction: 2004, functionality: fully functional, Bite here 4 pieces of fans with mounting plate and bracket. These were installed in an EC 200HP from York. Price is per fan. Lhedpok Dz Ensfx Akysf

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles FORM 2000 HP Year of manufacture: 2011 C-frame design, fixed table with drop tank Lodpfx Akex Eildjyohf Travel paths (X/Y/Z): 400 x 300 x 350 mm Distance table to quill: 170-520 mm Max. workpiece size (L x W x H): 820 x 580 x 250 mm Max. workpiece weight: 800 kg Integrated C-axis for rotation, indexing, and erosion (U=0-100 rpm) Pneumatic chuck of your choice (Erowa / 3R Systems) ISPG generator with 60 amperes Best achievable surface finish Ra 0.10 µm AGIEVISION 5 control interface 15” LCD color monitor, mouse or touchscreen, keypad, and manual control unit Including CAPA electrode changer - 40 electrode positions Net weight of the system: 3830 kg Machine dimensions: 1410 x 2460 x 2660 mm The machine will be cleaned, serviced, and tested by us upon receipt of order. Optional: - Commissioning and training - Transport and installation - Cooling unit - Dielectric fluid

Condition: good (used), Year of construction: 1994, functionality: fully functional, Used press brake by Darley Type EHP 50 20 15 Capacity 2050 x 50 tons Equipped with new Esa S630 control and Merlino lasersafe Lhjdpfx Akjxq Dfvoyef Includes set of tools

Condition: good (used), functionality: fully functional, grinding wheel diameter: 720 mm, grinding width: 225 mm, Double-disc fine grinding machine Highest stability thanks to full granite construction Visualized control Siemens S7 control Strong drive power, total 55 KW 3 separate drives with freely programmable rotation directions and ramps 6 runner discs Comprehensive service and monitoring software Lhsdpfswrpawex Akyof Working discs by arrangement (optional, extra charge) Auxiliary unit centrifuge (optional, extra charge)