Used V-Belt Gearbox 2:1 for sale (131,722)

Year of construction: 2015, condition: excellent (used), vertical automatic flat glass sand blasting machine with 4 air guns working height : 2000 mm OPEN TOP Kedpfx Asz Dt T Teg Aedu including air compressor and dryer . voltage : 230/400 V 50 Hz

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis Kdjdpfx Aouxfu Nog Aeu - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, Year of construction: 2023, overall weight: 70 kg, terms of delivery: FCA Pegnitz Kdedpozkb Diefx Ag Aeu delivery time: on request terms of payment: 100% prior to delivery

Condition: ready for operation (used), Year of construction: 2017, Brand: HSM Type: V-Press 1160 plus Year of manufacture: 2017 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press features simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Ksdoz Imlqspfx Ag Aedu Video available upon request!

Condition: used, Year of construction: 2000, We offer used Nikon V-12 profile projector, year of construction 2000. Manufacturer: Nikon Kdedpfxez Tdmdo Ag Aeu Model: V-12 Serial number: 277120 Country of manufacture: Japan Objective magnification: 20x, 50 x, 200x If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 1994, Motor data: 380 V - 50 Hz - 62 A 2 grinding units Brush Kdodpfx Agjgg R Tro Aju Electric height adjustment Grinding width: 1100 mm Operating pressure: approx. 8 bar Grinding belt length: 2150 x 1130 mm Weight: approx. 3500 kg Overall dimensions: W/D/H approx. 2100/2500/2300 mm

Condition: new, Bernardo belt grinder MS 150 x 2000 DC-2 / 400 V Technical specifications belt dimensions 150 x 2000 mm Belt speed 18 / 36 m/sec. contact wheel Ø x B 200 / 150 mm surface grinding table 500 x 150 mm suction connection Ø 2x 100 mm Suction capacity 520 m3/h speed suction 2780 rpm Motor power extraction 0,37 kW Motor output power S1 100% 2,5 / 3,3 kW Motor input power S6 40% 3,3 / 4,3 kW Voltage 400 V length 1130 mm Width 600 mm Height 1130 mm Weight approx. 116 kg Scope of delivery - Sanding belt K 80 - Hinged protective disk - Integrated suction - 2x aluminum suction hose diam. 100 mm - filter bag - Grinding and support table - Workpiece stop - Motor protection switch - Rubberized grinding roller - Graphite coating - Separate emergency stop button Kedpfspag Ttox Ag Asdu - Base frame

Condition: used, functionality: fully functional, HYDRAULIC VALVE Kdodpjxzqwtjfx Ag Aju All our items have been inspected by the technical department.

Condition: excellent (used), Condition: used, shows normal signs of use, fully operational Manufacturer: Vetter (Germany) Country of manufacture: Germany 📦 The set includes: 2x Vetter air lifting bag Type 1/6 complete set of air hoses (yellow + red) quick couplings Kdedpfx Agsz Smv Te Aeu carrying bag the set exactly as shown in the photos ⚙️ Technical specifications: Model: Type 1/6 Maximum lifting capacity: approx. 3.2 t (32 kN) – each bag Max. operating pressure: 0.5 bar Volume: approx. 403 L Air requirement: approx. 603 L Hoses: DN 19 mm working pressure 1 bar (14.5 PSI) ISO standard 🛠️ Applications: technical rescue (fire department) lifting of vehicles and machinery workshops and industry maintenance and emergency operations 📌 Additional information: renowned German manufacturer – Vetter complete set, ready for immediate operation solid, durable construction fast and safe lifting of heavy elements sold as shown in the photos

Condition: excellent (used), Year of construction: 2021, We are offering this very well-maintained XYZCAM V-1325 S ATC machine for aluminum, plastic, and wood processing, manufactured in 2021. Manufacturer: XYZCAM Model: V-1325 S ATC Year of manufacture: 2021 Condition: very good Category ID: 218 Machine type: Aluminum, plastic, and wood processing Ksdpfoz Irudex Ag Ajdu If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1980, Technical details: x-travel: 850 mm y-travel: 280 mm z-travel: 355 mm spindle taper ISO: SK 45 / SK 45 spindle head swivable left - right: je 90° ° range of revolution per miute: 28 - 1400 / 18 step U/min distance table/horizontal spindle: min.: 60 / max.: 180 mm Kedpfx Asu Ndf Ijg Aodu table surface area: 1070 x 270 mm table load: 1000 kg table swivelling +/-: je 45° Grad feed:: X+Y: 16 - 800 und Z: 5 - 250 mm/min total power requirement: 8,0 kW machine weight approx.: 3100 kg dimension machine xH: 2,1 x 1,8 x 2,15 m dimensions electric cabinet: L: 0,8 x B: 0,45 x H: 1,65 m clamping surface area: 315 x 1250 mm Horizontal beam adjustment manual 650 mm mounted on table: clamping head with 3-jaw chuck Ø 200 mm with inner jaws, center height 165 mm Coolant system Hand crank Milling arbor Ø 22 x 620 mm with form cutter 80 x Ø 8 mm *

Condition: used, Description Kdjdpez Tq N Ssfx Ag Aou The Solomat SIT 700 E2 is a powerful wood saw featuring a robust 400 V electric motor (7.5 kW) and a 2 m conveyor belt. It processes wood with a diameter of up to 220 mm and a maximum length of 150 cm. The cutting lengths can be adjusted without tools, ranging from 20 to 52 cm (including intermediate settings). The approximately 40° inclined saw table and the automatic wood feed ensure efficient operation. A movable arm holds the wood in position during sawing. The scope of supply includes a special carbide-tipped saw blade and a practical wood storage rack. The saw features a 3-point linkage of categories I and II, as well as a forklift attachment, which facilitates transport. - For wood diameters up to 220 mm, max. wood length 150 cm - Tool-free adjustment of cutting lengths: 20-52 cm (+intermediate settings) - Inclined saw table at approximately 40° - Automatic wood feed - Movable arm holds the wood during sawing - Incl. special carbide-tipped saw blade, 700x30x5.0x4.0 mm, 72 teeth - Incl. practical wood storage rack, 3-point linkage Cat. I and II - Forklift attachment

Condition: new, Year of construction: 2021, V-hold 4-sided, 5-spindle planer, model VH-M 521 - width from 25 to 230 mm - height from 8 to 160 mm 1st from the bottom - 7.5 kW 2nd from the right -7.5 kW Kdodpfshq Rp Hex Ag Asu 3rd from the left -7.5 kW 4. from the top -11 kW 5. from the bottom - 7.5 kW - 5.5 kW feed from 6 to 36 m / min - revolutions 6500 / min - diameter of the spindles 40 mm - feed for short, opposite the right spindle - pressure in front of and behind the upper spindle. - manual table lubrication pump - machine weight 3100 kg In stock

Year of construction: 2019, operating hours: 4 h, condition: used, functionality: fully functional, lifting height: 50,000 mm, main lifting speed: 12,500 mm/min, i=72, KBH140 B4, absolutely new condition, 100% SWP, incl. bottom block, without DMF (can be offered) Ksdpoq R N Tmjfx Ag Aodu Stepless control with inverter and radio with belly console optionally available!

Condition: good (used), Year of construction: 2012, Unitec Cherry Vison Unical 200 OC 11V174 grading machine for cherry tomatoes UNICAL_200 cherry is an electronic sorter designed for processing cherry tomatoes by size and colour. 1 lane8 grades + oversizeSorts by color and size Blows the fruits from the product carriers by air pressure2 V belts for picklingFeeding conveyor with dosing belt, speed adjustable3 Stimag digital weighers1st ownerPC from 2015Transport rollers / product carriers recently replacedRemote support possible It utilizes a roller conveyor system, “INTELL-A-VEYOR”, for spacing fruit by way of continuous transport. GRADE: high accuracy of the optical grade (from 12 to 40 mm.) ECONOMICAL: low overhead costs due to the simplicity and functionality of it’s design. This machine is in technical good condition. The plastic rollers of the chain are renewed recently. The reason why this machine was sold by the previous owner is, because they started growing cherry tomatoes on the vine. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. Kjdpfx Aez Rc Ubeg Aodu See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, load capacity: 2,000 kg, SEVERT Double-Column Positioner S 40.1-1HH, 2 complete sets available with full documentation For welding or assembly applications Can also be used as a single column elevation and rotation unit (mono configuration) Total load capacity: 2000 daN Load capacity per column: 1000 daN Torque of clamping plate 1: 1400 Nm Clamping plate 2: free rotation without drive Clamping plate rotational speed: 2.0 min⁻¹ Clamping plate 1 dimensions: W1070 x H720 x D30 mm, Part No. 20452-001 Clamping plate 2 dimensions: W1070 x H720 x D30 mm, Part No. 20453-001 Vertical stroke: 680 mm Lifting speed: 2200 mm/min Welding current return: 400 A Dimensions (B2): Column 1 with base: Length: 970 mm Width: 885 mm Height: 2350 mm Net weight: 1200 kg Column 2 with carriage: Kdjdsyupkyopfx Ag Asu Length: 970 mm Width: 1030 mm Height: 2350 mm Net weight: 1600 kg Excellent condition, complete documentation included We have multiple column elevation/rotator units in stock with load capacities from 1 ton up to 15 tons 2 complete sets (units) available

Condition: used, Globoidal cam gears, indexing, oscillator indexer, index gear -Manufacturer: Manifold, Transmission Clutch Indexing -Type: V-1-C 5 120 -Shaft: Ø 48 x 145 mm Kdjdpfxsriidye Ag Asu -Indexing angle: 120° -Number of stops: 5 -Dimensions: 400/385/H395 mm -Weight: 151kg

Condition: good (used), Year of construction: 1982, machine/vehicle number: 11.239, 🛠️ Heavy-Duty Portal Milling Machine WALDRICH SIEGEN Type V/H-FR A heavy-duty and powerful portal milling machine from WALDRICH SIEGEN is offered for sale, ideally suited for machining large and heavy workpieces. The machine comes from a renowned German manufacturer and impresses with its extremely robust construction, high base precision, and excellent suitability for modernization. 💡 Special Feature The machine is sold as-is (not overhauled) and therefore offers an ideal opportunity for customer-specific modernization (e.g. new CNC control, electrics, measuring systems) – perfect for buyers who want to implement their own solution. ⚙️ Highlights ✅ Portal design with fixed cross rail for maximum rigidity ✅ High performance: 58 kW main drive ✅ Speed range up to 1,800 rpm ✅ Two machine tables with automatic coupling ✅ Extremely high load capacity up to 100 tons ✅ Ideal for retrofit / CNC upgrade ✅ Perfect for heavy-duty machining 📊 Technical Data 🔹 Clamping surface per table: 2,500 x 4,000 mm 🔹 Clamping surface (coupled): 2,500 x 8,700 mm 🔹 Max. workpiece weight: ➡️ per table: 50 t ➡️ coupled: 100 t 🔹 X-axis travel: up to 9,503 mm 🔹 Y-axis travel: 5,515 mm 🔹 Z-axis travel (ram): 1,000 mm 🔹 Spindle power: 58 kW 🧰 Equipment ✔️ Tool changer (chain magazine, 60 positions) ✔️ Angle heads (RAA), including universal angle head ✔️ Spindle extension ✔️ Chip conveyor ✔️ Automatic accessory changing system 📍 Location Germany 👁️ Inspection Inspection possible at any time by appointment 📦 Availability Kedpsdkmihsfx Ag Ajdu Available at short notice 📩 Contact Contact us now for further information, pictures, or a customized offer!

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Electromagnetic belt separator IFE MEL 1400 length: 3200mm width: 1200mm Year of manufacture: 2007 Kedpfjpcf Etex Ag Ajdu Protection class of magnetic housing IP65; Magnet power 7.55 kW; Material flow rate 1.8 m/s; Drive power 4 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; cylinder diameter: 500mm Total weight: 6480 kg Adjusting the device belt and tension

Condition: used, functionality: fully functional, machine/vehicle number: M237 026, power: 1,600 kW (2,175.39 HP), fuel type: gas, Year of construction: 2005, operating pressure: 10 bar, used steam boiler installation Kodpfey Tpm Hjx Ag Aodu Fabricate: VIESSMANN Type: M237 026 Year: 2005 Steamcapacity: 2.300 kg/h Max. pressure: 10 bar CE 0035 Complete with appendages, Weisshaupt burner G8/1-D ZMD, controlpanel, economiser, automatic blowdown valve on conductivity, 2 frequency controlled feedwaterpumps, sample cooler. Also 4500 liter cascade deaerator.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Kdedpov Ivn Iofx Ag Aou Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: good (used), V-belt pulley, belt pulley, double wheel pulley, variable pitch roller, V-belt pulley with variable pitch -V-belt pulley: Roller V-belt pulley with variable belt width -Adjustment range: 17 - 35 mm -Hole: Ø 28 mm -Dimensions: Ø153 x 72 mm Kjdjymb Emopfx Ag Aedu -Weight: 5.1 kg

Condition: excellent (used), For sale: Mannesmann Demag AF06-L-M-0-145-1 geared motor with a three-phase Demag ZBA90 A4 B020 motor. The unit is fully functional, tested, and ready for operation. The visual condition is good, with normal signs of use. Notes: * One mounting lug has been cut – this does not affect the operation or correct mounting of the geared motor. * There is a small crack on the plastic motor cover, which does not affect the operation of the unit. Kjdpfx Aoz Snpzsg Aedu Technical data: Manufacturer: Mannesmann Demag AG Gearbox model: AF06-L-M-0-145-1 Motor model: Demag ZBA90 A4 B020 Power: 1.1 kW Supply: 3×400 V AC, 50 Hz Brake voltage: 180 V DC Rated current: 2.80 A Motor speed: 1400 rpm Output speed: approx. 23 rpm Gear ratio: i = 60.1 Brake torque: 20 Nm Cos φ: 0.75 Ingress protection: IP54 Insulation class: F Weight: 21.2 kg

Condition: used, functionality: fully functional, fuel type: diesel, empty load weight: 4,660 kg, number of seats: 1, first registration: 11/2019, operating hours: 2,880 h, Equipment: rubber tracks, standard shovel, TAKEUCHI TL10V-2 Mini Loader Kodez Rz I Hopfx Ag Ajdu 2,880 operating hours 1 bucket Weight: 4,660 kg 54.6 kW Year of manufacture: 2019 All information subject to change without notice/errors and omissions excepted.

Condition: used, Description The Solomat SIT 700 P2 is a powerful wood saw with a 2 m conveyor belt, ideal for wood with a diameter of up to 220 mm and a maximum wood length of 150 cm. It allows tool-free adjustment of cutting lengths from 20 to 52 cm with intermediate steps and features an angled lever (approx. 40°) for optimal comfort. An automatic wood feed and an emergency stop lever ensure safety with the PTO drive. The movable arm keeps the wood in position during sawing. A new feature is the special carbide saw blade, as well as a practical wood storage shelf. The machine can be easily transported with a 3-point hitch of Cat. I and II or by forklift. - For wood diameters up to 220 mm, max. wood length 150 cm Kjdpe Aaqvwofx Ag Aedu - Tool-free adjustment of cutting lengths: 20-52 cm (+intermediate steps) - Angled lever tilted approx. 40° - Automatic wood feed - Movable arm holds the wood during sawing - Emergency stop lever for PTO drive - Incl. special carbide saw blade, 700x30x5.0x4.0 mm, 72 teeth - Incl. practical wood storage shelf, 3-point hitch Cat. I and II - Attachment for forklift