Used Voortman Shot Blaster for sale (658)

Condition: new, Year of construction: 2026, functionality: fully functional, operating pressure: 6 bar, inner dimension width: 600 mm, inner dimension height: 400 mm, volume flow: 10,500 m³/h, Equipment: documentation/manual, New Wire Mesh Belt Shot Blasting Machine RB-600 AH 4 Description: The RB-600 AH 4 wire mesh belt shot blasting machine from ABRAZIV Kft. is designed for the economical and continuous surface treatment of small to medium-sized workpieces. The machine is suitable for descaling, derusting, cleaning, and surface preparation of aluminum and steel castings, forgings, and workpieces that cannot be shot blasted in bulk. The machine is manufactured to order and can be configured individually according to customer requirements. The RB-600 AH 4 is equipped with four ABR-380 shot blasting turbines. Two turbines are located above and two below the wire mesh conveyor belt. This arrangement ensures optimal coverage of the cross-section and a uniform blasting result. The turbines operate at an angle of approximately 70° to the direction of travel and have eight blasting blades and a pre-accelerator. The active blasting area is lined with highly wear-resistant manganese steel. Other internal areas are protected by wear-resistant, noise-reducing rubber. The wire mesh belt is made of highly wear-resistant spring steel. A closed blasting media circuit with a screw conveyor, bucket elevator, blasting media cleaning system, and dosing system ensures reliable operation. Three-layer rubber curtains reduce blasting media leakage. Lhodpfx Agjzkivtjtsk An adjustable high-pressure blow-off system cleans the workpieces after the blasting process. The extraction and filter system with cartridge filters achieves a dust emission of max. 3 mg/m³. Technical Data Passage Passage width: 600 mm Max. workpiece height: 400 mm Min. workpiece length: approx. 1,000 mm Shot Blasting Turbines Number: 4 Type: ABR-380 Turbine diameter: 380 mm Speed: 2,800 1/min Blasting media output per turbine: 120 kg/min Wire Mesh Conveyor Belt Load capacity: 500 kg/m Speed: 0–4 m/min Power Consumption Base machine: 45.5 kW Cartridge filter: 7.5 kW Compressed air: min. 6 bar Compressed air consumption filter: 12.5 m³/h Other Data Blasting media capacity: approx. 1,000 kg Blasting media grain size: 0.4–1.2 mm Extraction capacity: 10,500 m³/h Filter area: 252 m² Dust emission: max. 3 mg/m³ Electrical Data Mains voltage: 3 × 400 V Control voltage: 220 V Frequency: 50 Hz Optional accessories available Magnetic drum separator Frequency converter Automatic blasting media dosing Special paint finish Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Applications Aluminum and steel castings Forgings Small steel components Single and series components Descaling Derusting Cleaning Surface preparation Location / Production Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we produce shot blasting machines individually according to customer requirements. Other sizes and special designs are available. We will be happy to provide you with a non-binding offer. Price on request

Condition: used, Year of construction: 1986, functionality: limited functionality, We offer a continuous spray booth – Gutmann RZ – 1252. Year of manufacture: 1983 Inlet/outlet dimensions: 1200 x 350 mm (w x h) Turbines: 4 x 7.5 kW Electrical control panel, new in 2024, including frequency converters. Infeed conveyor: approx. 9000 mm Outfeed conveyor: approx. 9000 mm Filtration unit - Bartling Year of manufacture: 1996 Capacity: 6000 m3/h Motor power: 5.5 kW The machine is functional and still in operation. The stated price is for the complete machine + control panel + filtration + conveyors. Lsdszl Ryiopfx Agtehk

Condition: excellent (used), Shot blasting machine, continuous blasting machine, wear plates, blast wheel discs Lodpswaiv Usfx Agtohk -Spare and wear parts: for shot peening system continuous blasting system -Baffle plates: 02122 V105 7 pieces dimensions 390/125/H145 mm / 11.7 kg/piece. -Baffle plates: C1315 N517 2 pieces dimensions 480/140/H175 mm / 15 kg/piece. -Spinning wheel discs: 02122 V105 16 pieces, dimensions 350 x 80 mm / 112.5 kg/total. -Accelerator gears: 4 pcs. Ø 250 x 320 mm / 27 kg/pc. -Conveyor shafts: 3 pieces Ø 80 x 1640 mm / 40 kg/piece -Shipping/Price: complete -Total weight: 452.4 kg

Condition: new, Year of construction: 2026, functionality: fully functional, air demand: 15 m³/h, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, inner dimension width: 2,000 mm, inner dimension height: 650 mm, volume flow: 12,000 m³/h, tank capacity: 2,500 l, air pressure: 6 bar, suction capacity: 12,000 m³/h, New RB-2000 Conveyor Blast System Description: The RB-2000 conveyor blast system from ABRAZIV Kft. was developed for the economical surface treatment of steel sheets, profiles, tubes, and welded structures and is ideally suited for descaling, derusting, cleaning, and roughening steel surfaces. The system is manufactured to order and can be individually configured according to the customer's requirements. With a passage width of 2,000 mm and a workpiece height of up to 650 mm, the RB-2000 is particularly suitable for large and heavy workpieces. It offers maximum flexibility for demanding applications in steel construction, mechanical engineering, tank construction, and the metalworking industry. The RB-2000 is equipped with four high-performance ABR-500 blast turbines. Two turbines are arranged above and two below the conveyor, ensuring optimal coverage of the cross-section and a uniform blasting result. The inner surfaces of the blasting chamber are lined with highly wear-resistant manganese steel. Other areas are protected by wear-resistant rubber, which simultaneously reduces noise levels. A closed blasting media circuit with a screw conveyor, bucket elevator, blasting media cleaning, and dosing system ensures reliable and economical operation. All functions of the system are operated via a central control unit. In addition to automatic operation, a manual mode is also available for maintenance work. Technical Data Passage Passage width: 2,000 mm Min. workpiece length: approx. 1,500 mm Max. workpiece height: 650 mm Blast Turbines Number: 4 Type: ABR-500 Turbine diameter: 500 mm Speed: 2,600 1/min Blasting media flow rate per turbine: 150–300 kg/min Conveyor Load capacity: 1,500 kg/m Speed range: 0–4 m/min Power Requirements Base machine: 59–103 kW Cartridge filter: 15 kW Compressed air: min. 6 bar Compressed air consumption (filter): 15 m³/h Other Data Blasting media capacity: 2,500 kg Recommended blasting media grain size: 0.4–1.2 mm Extraction capacity: 12,000 m³/h Mains voltage: 3 × 400 V Control voltage: 230 V Frequency: 50 Hz Optional Frequency inverter Extended conveyors Automatic height scanning Automatic blasting media dosing Special paint finish Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Application Areas The RB-2000 is particularly suitable for: Lhsdszikaqepfx Agtek Steel sheets Steel profiles Tubes Hollow profiles Welded structures Steel construction Mechanical engineering Tank construction Contract blasting operations Location / Manufacturing Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we develop and produce our conveyor blast systems individually according to customer requirements. In addition to the RB-2000, other sizes and special versions are available. We will be happy to advise you on the design of the appropriate system and provide you with a non-binding offer. Price on request.

Condition: used, 10 Bilz quick-change tool holders WES 3 B 16 x 22. 3 pieces available WES 3 B 20 x 16. 1 piece available WES 3 B 22 x 18. 2 pieces available WES 3 B 25 x 20. 3 pieces available Lsdpedn Swrofx Agtshk WES 3 B 28 x 22. 1 piece available

Condition: new, Year of construction: 2026, functionality: fully functional, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, inner dimension width: 1,500 mm, inner dimension height: 450 mm, input voltage: 380 V, volume flow: 6,000 m³/h, tank capacity: 2,000 l, air pressure: 6 bar, Equipment: documentation/manual, New Conveyor Blast Machine RB-1650 Description: The RB-1650 conveyor blast machine from ABRAZIV Kft. has been developed for the economical surface treatment of steel sheets, profiles, tubes, and welded structures, and is ideally suited for descaling, derusting, cleaning, and roughening steel surfaces. The machine is manufactured to order and can be individually configured according to customer requirements. The RB-1650 is equipped with four high-performance ABR-400 blasting turbines. Two turbines are arranged above and two below the conveyor, ensuring optimal coverage of the cross-section and uniform blasting results. The inner surfaces of the blasting chamber are lined with highly wear-resistant manganese steel. Other areas are protected by wear-resistant rubber, which also reduces noise levels. A closed blasting media circuit with screw conveyor, bucket elevator, blasting media cleaning, and dosing system ensures reliable and economical operation. Ledpfszidykox Agtehk All functions of the machine are operated via a central control system. In addition to automatic operation, a manual mode is also available for maintenance work. Technical Data Passage Passage width: 1,650 mm Min. workpiece length: approx. 1,500 mm Max. workpiece height: 450 mm Blasting Turbines Number: 4 Type: ABR-400 Turbine diameter: 400 mm Speed: 2,600 1/min Blasting media output per turbine: 130 kg/min Conveyor Load capacity: 1,300 kg/m Speed range: 0–4 m/min Power Requirements Base machine: 44 kW Cartridge filter: 7.5 kW Compressed air: min. 6 bar Compressed air consumption (filter): 3.2 l/min Compressed air tank (filter): 250 l Other Data Blasting media capacity: 2,000 kg Recommended blasting media grain size: 0.4–1.2 mm Extraction capacity: 6,000 m³/h Mains voltage: 3 × 380 V Control voltage: 220 V Frequency: 50 Hz Optional Extras Frequency inverter Extended conveyors Automatic height scanning Automatic blasting media dosing Special coating Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Application Areas The RB-1650 is particularly suitable for: Steel sheets Steel profiles Tubes Hollow profiles Welded structures Steel construction Machine construction Tank construction Contract blasting operations Location / Production Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we develop and produce our conveyor blast machines individually according to customer requirements. We will be happy to advise you on the design of the appropriate machine and provide you with a non-binding offer. Price Price on request.

Condition: refurbished (used), functionality: fully functional, air demand: 6 m³/h, compressed air connection: 6 bar, warranty duration: 6 months, workpiece weight (max.): 800 kg, Fully Overhauled Rubber Belt Blasting Machine GH-4 For sale is a fully overhauled rubber belt blasting machine GH-4, professionally refurbished by the manufacturer ABRAZIV. This machine is ideally suited for deburring, descaling, cleaning, and surface roughening of castings, forgings, press parts, and other bulk goods. Its robust design and reliable blasting technology make it versatile for use in foundries, forging shops, and the metalworking industry. The machine has been professionally overhauled (refurbished) and is in perfect technical condition, like new. It is immediately available and can be inspected by appointment. Technical Data Blasting Chamber Lsdpfjzicuasx Agtehk Rubber belt width: 1,300 mm Belt drum diameter: 1,150 mm Maximum batch weight: 800 kg Blasting media capacity: 800 kg Blasting Turbines Number of turbines: 2 Power per turbine: 11 kW Connection Values Electrical connection power: 27.5 kW Compressed air connection: 6 bar Compressed air consumption: 6 m³/h Extraction capacity: 5,500 m³/h Condition Fully overhauled (refurbished) Technically inspected Immediately available As the manufacturer, we can also offer you the following services, if desired: Transport Installation Commissioning Operator training Spare parts supply Maintenance and service Location: Kecskemét, Hungary Inspection is possible at any time by prior appointment. Price on request.

Condition: reconditioned (used), Year of construction: 2023, shaft length under head: 200 mm, drawing speed: 75 mm/s, disc diameter: 14 mm, 2-shot cold press. Ljdpfxeqagpxo Agtohk FIDE EF-180 For the production of long screws Range: Diam.14x200 mm. Ppm: 75 Overhauled to new by HBR Ltd.

Condition: good (used), Loypack One shot chocolate depositor Lhedpjmqm E Ujfx Agtjk Stainless one shot moulding machine, 100Kg twin hopper, moulds are loaded into a denester, adjustable temp control, variable speed, heated water tank, comes with over 300 different moulds for making neopolitans, 3Ph

Condition: good (used), Loypack One shot chocolate depositor Lhsdpfsmqm E Rex Agtjk Stainless one shot moulding machine, 100Kg twin hopper, moulds are loaded into a denester, adjustable temp control, variable speed, heated water tank, comes with over 300 different moulds for making neopolitans, 3Ph

Condition: used, Dust separator, dust extractor, suction unit, dust cyclone, used equipment Lhsdpfx Aoyzmihogtek Overall Dimensions: Width: 1200 mm Depth: 600 mm Height: 1560 mm Inlet Size: 90 mm Outlet Size: 115 mm Equipped with a pneumatic valve

Year of construction: 2026, condition: new, Machine height : ~4300mm Lsdpfxoi D Digj Agtehk Machine width : ~3400mm Machine length : ~3400mm Maximum work piece height : 1400mm Maximum hook capacity : 2 x 500 kg Number of blast wheels : 2 x 7.5kW E-Eco Frequency inverter for turbine : 2 pcs Blasting time : Adjustable PLC : Siemens S7 1200 + TP 7'' Modem : 1 pc Safety fance with fotocell : Yes Automatic abrasive filling : Da Filter : PC4 (4.000m3/h) Total installed power : ~21kW This type of machine has all the electric cables on quick connectors, you only need three days and 2 mechanics.to prepare it for work. The machine is on stock. A test of the machine in our premises is possible with prior notice

Condition: new, Year of construction: 2023, total length: 6,700 mm, total width: 1,500 mm, total height: 2,950 mm, warranty duration: 12 months, overall weight: 2,200 kg, power: 12 kW (16.32 HP), Machine height : ~2.950 mm Machine width : ~1.500 mm Machine width with open doors : ~2.950mm Machine length : ~2.950 mm Table diameter : 1.200 mm Maximum work piece height : 500 mm Maximum table capacity : 500 kg Number of blast wheels : 1 x 7.5kW E-Eco Frequency inverter for turbine : 1 pcs Blasting time : Adjustable Lodpfx Agovr Tbastohk PLC : Siemens S7 1200 + TP 4'' Filter : PC2 (1.500m3/h) Total installed power : ~12 kW Application for sandblasting truck rims: YES Application for sandblasting pipes from 1’’(24mm) to 8’’(203mm) :YES This type of machine can be assembled before delivery, it takes just a day to prepare it for work. The machine is in stock. A test of the machine in our premises is possible with prior notice

Year of construction: 2026, operating hours: 4 h, condition: new, Machine height : ~2950mm Machine width : ~1500mm Machine width with open doors : ~2950mm Machine length : ~2950mm Table diameter : 1200mm Maximum work piece height : 500mm Maximum table capacity : 500kg Number of blast wheels : 1 x 7.5kW E-Eco Frequency inverter for turbine : 1 pcs Blasting time : Adjustable PLC : Siemens S7 1200 + Touch Panel 7'' Lhedoi Dprnspfx Agtek Filter : PC2 (1.500m3/h) Total installed power : ~11kW This type of machine can be assembled before delivery, it takes just a day to prepare it for work. Machine is on stock.

Year of construction: 1994, operating hours: 5,742 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 17-109-94, For sale: PROMECO GT15 turbine shot blasting machine with a rotary table. The machine is fully functional and ready for operation, and can be inspected while running. The machine has been well-maintained and upgraded over time with numerous overhauls and repairs. Sale is due solely to an upgrade to a larger machine. TECHNICAL SPECIFICATIONS: - Brand: PROMECO - Model: GT15 - Year: 1994 - Configuration: rotary table - Turbine: 1 x 7.5 kW - Power supply: 220/380 V - Total operating hours: 5742 h - Includes 325 kg of new, professional-grade abrasive media MAINTENANCE PERFORMED: - Turbine motor replacement - Fan replacement - Rotary table bearing replacement - Complete replacement of internal wear-resistant linings Lhsdpfx Ajzcwpmogtok - Control panel and switchboard upgrade - Overhaul and upgrade of the pneumatic system Machine in excellent operating condition. Interior completely restored with new wear-resistant linings. Includes: - Technical documentation - Certification - Original identification plates Available: - Detailed photos - Operating video upon request - Additional technical information upon request Opportunity to inspect the machine while running. Assistance with loading and transport is available. PRICE: €18,500.00 (excluding VAT), negotiable.

Condition: excellent (used), 4 Bag fillers for sale all working call or email for inquiries Lodpfxoyryqxe Agtohk

Condition: good (used), AFT Single shot depositor Stainless height adjustable frame, 25Kg hopper, fill range 25g - 100g, mobile, 1Ph Lhodpfxsfv Spvj Agtek

Year of construction: 2010, condition: used, Turbo M100P single shot depositor stainless depositor, 25L hopper, adjustable weight control, variable speed Lsdpfx Agjdbqx Sjtohk

Year of construction: 2015, condition: used, Steven single shot depositor 100L stainless hopper, adjustable fill size on mobile stainless frame Lhedpjdbqzdjfx Agtok

Condition: like new (used), Year of construction: 2022, operating hours: 11 h, functionality: fully functional, machine/vehicle number: 181070, Scope of supply for the overhead rail blast machine Blasting cabin: 100% manganese Transport system Y-rail: included Abrasive recovery hopper: included Automatic abrasive cleaning: included Automatic abrasive quantity control: included HMI: Siemens TP7 Remote access (via VPN): included Characteristics of the installed turbines Number: 2 units Lsdpoy Avh Njfx Agtshk Drive power per turbine: 11.0 kW Speed control: included System characteristics Blasting tasks: surface finishing including cleaning, roughening, peening, derusting, descaling Workpiece designation: Various steel parts Coverage (%): depending on component Capacity (parts/hour): individual Abrasive (material and size): aluminum and aluminum-zinc abrasive or steel abrasive in various sizes possible Abrasive quantity (initial fill): approx. 1000 kg Workpiece material: steel Hook load: max. 450 kg Workpiece temperature: max. 80° C Workpiece height: 1300 mm Part diameter (min/max): 1100 mm Sound pressure level without soundproofing: approx. 85 - 90 dB(A) Optional offers: Dry filter including secondary filter EUR 18,880.00 Pipework 5m EUR 1,980.00 Technical data of the filter system: Type: dry filter Air flow capacity: 2,600 m³/h Filter surface area: 36 m² Residual dust concentration: ≤ 2.0 mg/Nm³ Residual dust concentration with after-filter: ≤ 1.0 mg/Nm³ Supervision and installation starting from EUR 3,500.00 The system is delivered in CE-compliant design. Exempted are linked systems or systems where essential components are added or modified by the customer. In such cases, AGTOS provides an installation declaration. Upon request, we are happy to send you a layout plan.

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, total width: 2,400 mm, total height: 4,500 mm, total length: 3,800 mm, overall weight: 3,800 kg, inner dimension height: 600 mm, turntable diameter: 350 mm, Shotblasting machines with rotating satellites type PTR and SSR are designed to treat sensitive parts in singularly mode with any kind of shots. The nozzles are managed by a robot. The machine is equipped with a main indexed table that works as a pallet exchanger enabeling the entrance/exit of the parts into/out to the blasting chamber. The main table is equipped with 2 or 4 satellites; in accordance with production rate. One station is dedicated for loading/unloading, while another one (opposite to the loading area) is dedicated to the blasting/peening process. The nozzles are driven by a robot. The number of nozzles is defined according to the loading volume, the production rate and the geometry of the pieces. This machine is usefully for manual loading/unloading operation but it can be also equipped with an automatic handling device according to the process line request (2-axis gantry, robot…). Ventury system or Pressure type technology can be installed on such equipment. Installation of Magnetic Valves for shot flow check is also recomended. The machine can be equipped with up to three robots for peening. Ledpfx Agowdgpgotehk

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, overall weight: 8,000 kg, inner dimension height: 600 mm, workpiece weight (max.): 20 kg, turntable diameter: 400 mm, The described shot blasting machine is designed for the automatic blasting or peening with selected media shots in accordance to the final finishing result to achieve. Part to be blasted will be positioned on suitable pieces’ holders that minimized the shadowing of the contact areas parts/jigs. The parts are inserted and extracted by an automatic cycle into the blasting/peening zones, by means of a step-by-step conveyor that can also operate in continuous mode. The parts, after passing through a neutral zone, are blasted / peened in the subsequent zones, prior unloading the parts are also blown. The system is equipped with one (1) loading/unloading position to allow easier loading/unloading during the process cycle Once the piece has been loaded with operator or automation, the cycle starts and the conveyor process a step forward, allows the newly loaded piece to enter the cabin and the simultaneous arrival of an already processed part at the unloading station. The machine works with masked times, therefore all the positions of the satellites equipping the conveyor are occupied in the cycle time, when fully operational. In the inner positions of the cabin the satellites rotate, and the shooting guns jets the blasting/peening media with a correct impact angle as from appropiate design. Lhedpfx Agswdgrzjtok

Year of construction: 1995, condition: excellent (used), MONORAIL HANGER SHOT BLASTING MACHINE WITH WETFILTER Designation: Monorail Hanger Shot Blaster Brand : Schlick Type: DHB 12/14 Workpieces ø: 1.200mm Workpieces High max.: 1.400mm Charge max. kg: 500kg Shot Wheel: 3 Pieces with 7,5kw with Drivers Consisting of: - Monorail Hanger Shot Blaster Typ: DHB 12/14 - O-Hanger System with Workpieceshangers - Main Panel - Wet Filter Wir bieten auch Ersatzteile für Rösler, Schlick, Wheelabrator, Gietart usw. Strahlanlagen an! We can offert for spare Parts for Rösler, Shot Blasting Machines! Lsdpfed Hp Sqex Agtohk

Condition: used, functionality: fully functional, machine/vehicle number: N/A, The GH-4 type shot blasting machine is primarily recommended for surface cleaning and treatment of cast, forged, and pressed parts in bulk using shot blasting. Blasting chamber dimensions: Rubber belt width: 1,300 mm Belt disc diameter: 1,150 mm Max. workpiece load weight: 800 kg Shot charge: 800 kg Blasting heads: Number of blasting heads: 2 pcs Lhodsy Nbm Dopfx Agtsk Drive motor power: 11 kW Power requirements: Electric: 27.5 kW Compressed air pressure: 6 bar Quantity: 6 m3/h Dust extraction fan capacity: 5,500 m3/h Our equipment is fully refurbished and offered for sale in like-new condition. Directly from the manufacturer! We can assist with transport and assembly upon request.

Condition: new, Automatic sheet metal & profile shot blasting machine It is preferred for surface cleaning works of products such as sheet metal, NPI, NPU, angle, profile etc. The parts to be sandblasted move with the help of roller conveyors located at the entrance and exit of the machine. Turbines are placed in the machine body at appropriate angles so that the part surface can be sandblasted from the bottom and top. Lhjdpfx Aeghaywogtsk Its distinct advantages are that the products can be sandblasted quickly in length, semi-finished and finished products that can move on the roller conveyor, and the conveyor system. The digital speed control we use in our machines can be adjusted for each loading according to the piece type and the desired sandblasting surface. The machine is designed and manufactured according to the size, weight and daily number of the parts to be sandblasted. Conveyor lengths can be lengthened or shortened upon request.