Used Allied Telesis Network for sale (688)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,893 h, load capacity: 1,000 kg, lifting height: 3,700 mm, fuel type: electric, mast type: duplex, construction height: 2,340 mm, battery manufacturer: SBS, battery capacity: 500 Ah, remaining battery capacity: 95 %, battery voltage: 24 V, Type: Toyota 7FBEST10 Fgsdpfxoy I Afro Ad Njb Load capacity: 1,000 kg Operating hours: 8,893 Year of manufacture: 2014 Overall height: 2,340 mm Lift height: 3,700 mm Battery: 24 V 500 Ah, Year 10/2024 Charger: 24 V 60 A Special features: 3rd and 4th hydraulic valve routed up to the mast Optional: new safety inspection (UVV) Sale only to commercial customers. Warranty and liability are fully excluded. Errors in input, changes, and prior sale reserved. All prices are exclusive of statutory VAT. Transport can be organized throughout Europe by our partner forwarding company for an additional charge, following receipt of payment. If this machine does not meet your requirements, we can offer you over 1,000 other machines from our dealer network. If you have any questions, please feel free to contact me at any time. The machine can be inspected upon prior arrangement. Best regards, Nils Leyers

Condition: new, Year of construction: 2021, Optimum CNC Milling Machine OPTImill F 105 CNC Sinumerik 808D ADVANCE with accessories (new, unused condition): Includes accessories: - CNC Tool Starter Set BT 40 - SPW 12 Clamping Tool Assortment, 58-piece - Hydraulic Milling Vise HCV 105 - 20 liters of cutting and drilling emulsion AQUACUT C1 - Preparation for 4th axis - Carousel tool changer with 12 tool positions - All linear guides with stainless steel covers - Automatic central lubrication - Siemens main spindle motor - Siemens servo drives on all axes (closed loop) - Max. spindle speed 10,000 rpm - Machine lamp in the working area - Portable electronic handwheel with enable switch and emergency stop - Coolant system with 120-liter tank - Tool change is automatic or at the push of a button (electropneumatic tool clamping system) Dimensions and weights: Length approx. 2,164 mm Width/depth approx. 1,860 mm Height approx. 2,200 mm Weight approx. 2,800 kg Drilling/milling capacity: Max. face mill diameter: 70 mm Max. shank cutter size: 35 mm Rapid traverse speed: X-axis 15,000 mm/min Y-axis 15,000 mm/min Z-axis 15,000 mm/min Electrical data: Supply voltage 400 V Network frequency 50 Hz Electrical connection: Total connected load 15 kVA Horizontal milling table: Length 800 mm Width 320 mm Distance vertical spindle to table min. 100 mm Distance vertical spindle to table max. 600 mm T-slot size 14 mm Number of T-slots 3 T-slot spacing 100 mm Max. table load 300 kg Accuracy: Repeatability ± 0.008 mm Positioning accuracy ± 0.008 mm Coolant system: Coolant pump drive power: 650 W Tank capacity 120 l Pneumatic connection: Operating pressure 7 bar Travel range: X-axis automatic 550 mm Y-axis automatic 305 mm Z-axis automatic 460 mm Vertical spindle: Spindle taper BT 40 Speed range 10 – 10,000 rpm Motor power (continuous duty S1) 7.5 kW Motor power (intermittent duty S6-30%) 11 kW Motor torque (continuous duty S1) 48 Nm Motor torque (30% duty cycle S6) 70 Nm Feed motor torque: X-axis continuous duty S1: 8 Nm Y-axis continuous duty S1: 8 Nm Z-axis continuous duty S1: 11 Nm Tool changer: Type: Carousel Number of tool positions: 12 Max. tool diameter: 70 mm Max. tool length: 300 mm Max. tool weight: 6 kg Tool change time (T to T): 7 s CNC Tool Starter Set BT 40: - 1 pc. face mill arbor, 27 mm mounting - 1 pc. keyless drill chuck 1.5 – 16 mm Fsdeyxyhfjpfx Ad Njgb - 2 pcs. Weldon 6 mm / 20 mm - 1 pc. each Weldon 8 mm / 10 mm / 12 mm / 16 mm - 1 pc. adaptor BT 40 to MK 3 - 4 pcs. collet chuck ER 32 - 1 pc. collet chuck wrench ER 32 - 18-piece collet set ER 32 - 1 pc. height adjustment device - 1 pc. assembly and tool presetting aid - 15 pcs. pull studs Hydraulic Milling Vise HCV 105: - Robust design for milling - Guide surfaces hardened and ground - Booster system: low effort, high clamping force when tightening - Wide clamping range with locating pin and various hole spacings - Manufactured from high-quality stainless steel - Long service life thanks to high quality - High clamping force Jaw height 42 mm Jaw width 107 mm Clamping width 170 mm Length without handle 442 mm Total height 107 mm T-slots 16 mm Clamping force 24.5 kN Clamping pressure 2,500 kg Dimensions and weights: Weight approx. 22 kg

Condition: excellent (used), power: 129 kW (175.39 HP), fuel type: diesel, lifting height: 24,000 mm, axle configuration: 4x4, Year of construction: 2017, operating hours: 5,793 h, Equipment: air conditioning, all wheel drive, Drivetrain AdBlue system: Yes Drive: Wheel Make of engine: FPT Performance Top speed: 40 km/h Weights Empty weight: 18.900 kg Functional Lifting capacity: 6.000 kg CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Identification Serial number: ZF1RT30D1C7001686 Other information TÜV Marked: yes Transport dimensions (LxWxH): 0,445/6,5225 Production country: IT Additional information Please contact Robert Vijn for more information = Additional options and accessories = - Ad blue - Additional hydraulics - Forks - Original colour - Quick locks Fedoy Ip D Uopfx Ad Nsgb - Stabilizer = Remarks = Very neat and original Merlo Roto 60.24 MCSS. - From the first and only Dutch owner - CE machine - Year of manufacture: 2017 - Hours: 5793 - Full remote control - Dutch registration - Tilting cab - Extra functions on the boom - Lifting height: 24.00 meters - Lifting capacity: 6000 kg - 95% original paint!! - Tires: 60% good - Extra outrigger pads - all books and CE documents + inspection reports with the machine Transport We offer our customers the opportunity to handle transports in a fast, safe and efficient manner. For domestic transport we work together with various renowned transport companies. For transports over longer distances both within and outside Europe, we have a solid network of transport companies and shippers. This means we can always ensure a suitable rate. You can of course also have your purchases transported yourself. We have the facilities, such as a loading ramp and forklift, for fast and problem-free loading. Export We can assist you with all your export questions. Within the European Union and the latest VAT regulation, buying and selling machines in Europe has become very easy. For export within the EU, in most cases a valid VAT number, an invoice and proof of transport are sufficient. Machines and parts that we sell outside the European Union must always be cleared by Dutch customs. We can take care of all the required export documents. (EX-A, EUR.1 etc)

Condition: like new (used), functionality: fully functional, Year of construction: 2020, PROFESSIONAL GAS PIPELINE PLUGGING EQUIPMENT SET - RAVETTI Complete set of professional gas flow stopping devices for networks DN150-300, max pressure 1.2 MPa, manufacturer Ravetti (Italy). THE SET INCLUDES: 1. Stop System Hybryda DN 8"-10"-12" (200-250-300) - Max pressure: 1.2 MPa - For gas networks DN 200-300 - Complete with original metal transport case 2. Stop System SS3 Ravetti DN 6" (150) - Max pressure: 1.2 MPa - For gas networks DN 150 - Complete with original metal transport case TECHNICAL DETAILS: - Purchase date: November 2020 - Original value: PLN 1,000,000 net (approx. EUR 230,000) - Condition: LIKE NEW - used only 3 times during gas pipeline connections - Storage: original metal transport cases, perfect condition - Application: gas pipeline plugging ADVANTAGES: ✓ Renowned Italian brand - Ravetti ✓ Practically unused equipment (only 3x!) ✓ Huge savings compared to new price ✓ Complete set covering DN150-300 range ✓ No maintenance required - ready to work ✓ Original packaging and transport cases IDEAL FOR: - Gas distribution companies - Gas pipeline construction companies - Gas network operators - Industrial maintenance contractors PRICE: PLN 650,000 net (EUR 155,000) - negotiable Location: Poland. Viewing and demonstration possible by prior appointment. Fodpfxoymtp Rs Ad Nogb Serious inquiries only. Full technical specifications and additional photos available upon request. CHANGE OF BUSINESS PROFILE - hence the sale of this exceptional equipment.

Condition: used, mileage: 37,802 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, first registration: 01/2025, color: black, number of seats: 7, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, * Central locking system with keyless locking and starting system "Keyless Advanced" featuring safe locking * Bi-color seat covers, seat center panels in microfleece "ArtVelours", seat bolsters in smooth leather-look * Heated seats for both cab seats, individually adjustable left and right * Multifunction leather steering wheel with shift paddles Fgodeyraaaspfx Ad Nsb * 3-zone climate control "Air Care Climatronic" with additional control panel in the passenger compartment * Electrically adjustable AGR seat, front left, with 4-way headrest, driver's side only: with memory and massage function * Armrests for driver and passenger seats, both sides, with electric lumbar support and folding table * 2 front USB-C interfaces, 4 USB-C charging ports in the passenger compartment * App-Connect including App-Connect Wireless for Apple CarPlay and Android Auto * Digital Cockpit Pro * Digital radio reception * "Harman Kardon" sound system, 13 speakers, total output 840 watts, digital 16-channel amplifier, subwoofer * Mobile phone interface "Comfort" with inductive charging function * "Discover Pro" navigation system with 25.4 cm (10") color touchscreen including "Streaming & Internet" * Speed-dependent power steering (Servotronic) * Dynamic high beam control "Dynamic Light Assist" for LED matrix headlights * Automatically dimming interior rear-view mirror * Emergency braking assistant "Front Assist" with pedestrian and cyclist detection * Driver assistance "Travel Assist" including lane keeping assistant "Lane Assist" and "Emergency Assist" * Distraction and fatigue detection * Electronic Stability Program and electromechanical brake booster * Automatic Distance Control ACC "stop & go" * Airbags for driver and front passenger, with front passenger airbag deactivation * Speed limiter and "Intelligent Speed Assist" * Anti-theft alarm system with interior monitoring, backup horn, and tow-away protection * Multifunction camera * Lane change assistant "Side Assist" including "Blind Spot Detection", park exit assistant and exit warning * Traffic sign recognition * Emergency call system eCall (requires available cellular network) * Parking assistant "Park Assist" and parking sensors front and rear * Surround view "Area View" including reverse camera "Rear View" * Side and curtain airbags for driver and passenger, curtain airbags for outer rear seats, and center front airbag * Intermittent windshield wipers with rain sensor for front wipers * 17" disc brakes front and 16" disc brakes rear * 4-cylinder engine 2.0L Aggr. 05L.E * AGR ErgoComfort front seats, ArtVelours, electrically adjustable, driver side only with memory and massage function * Emission concept, WLTP3 M1, N1-I//EU6EA * Adaptive chassis control DCC (Dynamic Chassis Control) with sports suspension (lowered by approx. 20 mm) * Advanced assistance package * Evasion support and turn assist * Driving profile selection for DCC * Front windshield in laminated safety glass, heat and sound insulating, heated * Dark-tinted rear compartment windows * Left and right sliding doors, electric * Folding tow bar with electric release * Tire pressure monitoring indicator (as per EU type approval) * Daytime running light control with assistance light and "Coming home" and "Leaving home" functions * HT-LED matrix headlights with LED daytime running lights * Fuel-powered auxiliary heater * Tailgate with soft-close assist * LED tail lights, tinted * Headlight range control, dynamic, with dynamic cornering light

Condition: good (used), functionality: fully functional, Year of construction: 2009, laser type: CO₂ laser, laser power: 3,200 W, X working area max.: 6500 mm Laser power: 3200 watts Control: SINUMERIK 840D Standard equipment: - Robust machine frame with integrated laser unit - CO2 laser TLF 2000, high-frequency excited, with cooling unit - Drives: Maintenance-free three-phase servo motors - Hl-LAS high-pressure cutting - Fast processing with SprintLas Fgjdpfxsytpims Ad Njb - Programmable cutting gas pressure adjustment - Laser cutting head with 5" lens, DIAS III - Quick-change device for cutting head - Laser power control - Laser logbook function - Automatic shut-off - Work area lighting - Control system SINUMERIK 840D: Open PC-based control, easy operation, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5" floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully enclosed and ventilated beam guidance, compact extractor, protective cabin - PRS 3001 unloading station with brush table - Chuck set D 20-85 mm Special equipment: + Upgraded to Laser TruFlow 3200 + SeamLine Tube + LoadMaster Tube 6.5 m, rear + Focus Line

Year of construction: 2009, condition: used, Used machine Year of manufacture: 2009 Condition: well-maintained Point-to-point drilling machine Working width: 800 mm with grooving unit Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle in X-axis direction 1 drilling spindle in Y-direction Grooving saw unit in X-direction 3-axis control X: NC-controlled feed of workpiece via overlapping pneumatic clamping gripper Y: NC-controlled drilling movement Z: NC-controlled drilling depth adjustment Pneumatic roller hold-downs in feed area Pneumatic clamping gripper for transport DXF interface 15" color screen Keyboard including mouse Network card USB interface Max. panel width: 950 mm Max. drilling width: 800 mm Max. processing width for back panel grooves: 600 mm Max. feed speed (X-axis): 30 m/min Max. drill bit diameter: 35 mm Max. total drill length: 70 mm Connected load: 2.5 kW Extraction port: 100 mm Required pressure: 6 bar Fgedsw Tfxqepfx Ad Neb Working height: 900 mm Machine dimensions (LxW): 1650 x 2100 mm Availability: Short-term Location: Solingen

Condition: new, functionality: fully functional, power: 2.7 kW (3.67 HP), fuel type: gasoline, color: yellow, operation weight: 64 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson BS 62-4 A Rammer – NEW | 689 blows/min | Operating weight: 64 kg | Impact force: 17 kN | Honda GXR 120 petrol engine | Foot width: 28 cm Article number: 5100068373 Technical specifications: Manufacturer: Wacker Neuson Model: BS 62-4 A Condition: NEW Operating weight: 64 kg Blow rate: max. 689 1/min Impact force: 17 kN Engine: Honda GXR 120 petrol engine Engine power: 2.7 kW Starting system: Recoil start Foot width: 28 cm Highlights & Features: - Powerful 4-stroke rammer – ideal for demanding compaction tasks - Robust Honda engine – reliable & low-maintenance - 28 cm foot width - Compact design – for precise operation in confined spaces - Made by Wacker Neuson – proven quality & immediately available Application areas: ✓ Cable & pipeline construction ✓ Landscaping & horticulture ✓ Compaction in trenches & narrow spaces ✓ Municipal works & construction contractors ✓ Fiber optic & network installation Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery: Germany-wide & international upon request Pricing: ex works, Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to prior sale and errors. Prices excl. VAT Additional configurations available! Also available with 15 cm & 25 cm foot plates ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson rammers | BS 62-4 A NEW | Petrol rammer with Honda GXR 120 | Compaction technology for cable trenching & excavation | Wacker Neuson quality Your reliable partner for compaction technology & construction machinery: Claudio Macagnino Construction Machinery & Commercial Vehicle Trading GmbH Fodpfxey In Tbo Ad Negb ➡️ Contact us now & secure immediately available new equipment! Virtual machine inspection via video call available on request.

Condition: new, functionality: fully functional, power: 1.8 kW (2.45 HP), fuel type: gasoline, color: yellow, operation weight: 64 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson BS 68-2 Rammer – NEW | 64 kg Operating Weight | 19 kN Impact Force | 2-stroke Petrol Engine WM 80c | 28 cm Shoe Width Article number: 5100070150 Technical Specifications: Manufacturer: Wacker Neuson Model: BS 68-2 Condition: NEW Operating Weight: 64 kg Impact Force: 19 kN Engine: Wacker Neuson WM 80c 2-stroke petrol engine Engine Power: 1.8 kW Starting System: Recoil start Shoe Width: 28 cm Special Feature: Successor to the BS 60-2 Fgedpfx Aey In S Ded Njb Highlights & Features: - Successor to the proven BS 60-2 – with improved performance - Robust 2-stroke engine – powerful & easy to maintain - 28 cm shoe width - Compact design – ideal for confined workspaces - Made by Wacker Neuson – renowned quality & immediately available Applications: ✓ Cable & pipeline construction ✓ Landscaping & gardening ✓ Compaction in trenches & narrow areas ✓ Municipal use & construction companies ✓ Fibre optics & network construction Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery: Nationwide & international shipping available upon request Pricing: ex works Maassenstraße 91, D-46514 Schermbeck (Wesel District) All details without obligation. Errors and prior sale excepted. Prices plus VAT / VAT excluded Other versions available! Also available with 25 cm & 33 cm shoe plates in our range ➡️ New & used machines, accessories & spare parts Purchase Wacker Neuson Rammers | BS 68-2 NEW | Petrol rammer with WM 80c engine | Compaction technology for cable & trench works | Wacker Neuson quality Your reliable partner for compaction equipment & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Enquire now & secure immediately available new stock! On request, we are happy to offer a virtual live inspection of the machine via video call.

Condition: new, functionality: fully functional, power: 1.5 kW (2.04 HP), fuel type: gasoline, color: yellow, operation weight: 30 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson BS 30 Rammer – NEW | 820 blows/min | 30 kg operating weight | Special rammer for pipe socket compaction | Optimized impact force for precise compaction | 2-stroke petrol engine WM 80 | Ram foot width 15 cm Product no.: 5100037146 Technical data: Manufacturer: Wacker Neuson Model: BS 30 Condition: NEW Operating weight: 30 kg Impact rate: max. 820 rpm Engine: Wacker Neuson WM 80, 2-stroke petrol engine Engine power: 1.5 kW Start system: Recoil starter Fedpfxsy In Ske Ad Negb Ram foot width: 15 cm Highlights & features: - Special rammer for pipe sockets – ideal for precise compaction in confined areas - Compact & lightweight design – only 32 kg - 15 cm ram foot width – perfect for narrow trenches & tight spaces - Robust 2-stroke engine – proven & powerful - Made by Wacker Neuson – professional quality Applications: ✓ Cable & pipeline construction ✓ Fibre optic & network construction ✓ Compaction in pipe sockets & narrow areas ✓ Landscaping & gardening ✓ Municipal works & construction companies Location: Warehouse D-46514 Schermbeck (NRW) – inspection & collection possible Delivery: throughout Germany & internationally upon request Price ex warehouse Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to errors and prior sale. Prices plus VAT / VAT excluded Other models available! Also in stock: BS 62-2, BS 62-4, etc. ➡️ New & used machines, accessories & spare parts Buy a Wacker Neuson rammer | BS 30 NEW | Special rammer for pipe socket applications | Compaction technology for narrow spaces | Wacker Neuson quality Your reliable partner for compaction technology & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Inquire now & secure immediately available new equipment! A virtual inspection of the machine via video call is gladly available upon request.

Condition: excellent (used), functionality: fully functional, power: 2.8 kW (3.81 HP), fuel type: gasoline, color: white, operation weight: 58 kg, Year of construction: 2024, operating hours: 13 h, Equipment: UVV, Dynapac DR6X Rammer Demo Machine Dynapac DR6X Rammer – Demo Machine | Year of manufacture: 2024 | Approx. 13 operating hours | Shoe width: 230 mm | Honda GXR 120 petrol engine with 2.8 kW | Identical to Bomag BT 60 Technical data: Manufacturer: Dynapac Model: DR6X Condition: Demo machine Year: 2024 Operating hours: approx. 13 h Operating weight: 58 kg Shoe width: 230 mm Engine: Honda GXR 120 petrol engine Engine output: 2.8 kW Fuel: Petrol Fgedpfx Ajy In N Njd Nsb Starting system: Recoil starter Highlights & Features: - As-new demo unit with very low operating hours - Identical construction to Bomag BT 60 - Powerful rammer for precise compaction tasks - Reliable Honda GXR 120 engine – robust & durable - 230 mm shoe width – ideal for narrow trenches & utility construction - Compact design – lightweight & highly manoeuvrable - Proven Dynapac quality – immediately operational Areas of application: ✓ Cable & pipeline construction ✓ Compaction in trenches & confined spaces ✓ Landscaping & horticulture ✓ Municipal work & construction companies ✓ Fibre optic & network installation Location: Warehouse D 46514 Schermbeck (NRW) – Inspection & collection possible Nationwide & international delivery available on request Price ex stock Maassenstraße 91, D 46514 Schermbeck (Wesel district). All information without guarantee. Subject to error and prior sale. Prices plus VAT / VAT excluded Other brands available! Also in stock: Wacker Neuson, Bomag, Weber, etc. ➡️ New & used machines, accessories & spare parts Buy Dynapac Rammer | DR6X Demo Machine | Year 2024 | Petrol Rammer 15 kN | Honda GXR 120 | 230 mm rammer foot | Dynapac Compaction Technology | Identical to Bomag BT 60 Your reliable partner for compaction technology & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Enquire now & secure your immediately available demo machine! Virtual machine inspections available via video call on request.

Condition: new, functionality: fully functional, power: 2.3 kW (3.13 HP), fuel type: gasoline, color: yellow, operation weight: 70 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson BS 68-4 A Rammer – NEW Fgsdpfsy In Nijx Ad Neb Wacker Neuson BS 68-4 A Rammer – NEW | 689 blows/min | 70 kg operating weight | Impact force 19 kN | Honda GXR 120 petrol engine | 28 cm shoe width Item number: 5100068375 Technical Data: Manufacturer: Wacker Neuson Model: BS 68-4 A Condition: NEW Operating weight: 70 kg Blow rate: max. 689 strokes/min Impact force: 19 kN Engine: Honda GXR 120 petrol engine Engine power: 2.3 kW Starting system: Recoil start Shoe width: 28 cm Highlights & Equipment: - Powerful 4-stroke rammer – ideal for demanding compaction tasks - Robust Honda engine – reliable & low maintenance - Shoe width 280 mm – other sizes available - Compact design – for precise work in confined spaces - Made by Wacker Neuson – proven quality, immediately available Applications: ✓ Cable & pipeline construction ✓ Landscaping & horticulture ✓ Compaction in trenches & narrow areas ✓ Municipal works & construction companies ✓ Fibre optic & network installation Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery: Nationwide and international delivery on request Pricing: Ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) All details subject to change. Errors and prior sale excepted. Prices plus VAT / VAT excluded Other versions available! Also available with 25 cm & 33 cm shoe plates ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson rammers | BS 68-4 A NEW | Petrol rammer with Honda GXR 120 | Compaction equipment for cable & trench work | Wacker Neuson quality Your reliable partner for compaction technology & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Enquire now & secure immediately available new machines! Virtual machine viewing via video call available on request.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25) Year of manufacture: 2022 Serial number: Fedpfx Adexwurye Nogb Excellent condition – used only for demonstration and sample production. Machine has been professionally maintained and is immediately available for inspection in Slovenia. Technical data and equipment: Continuously adjustable feed speed: 16–25 m/min Workpiece thickness: 8–60 mm Fixed fence on the left-hand side Working height adjustable Pre-installation for LOOPTEQ O-200/O-300 return system Feed lock system Workpiece alignment at infeed with roller support Top pressure unit Sizing package with DIA joint trimming cutter set WD40 Gluing package with preheating up to 60 mm thickness Adhesive application system with emptying function Edge magazine with two vertical roll holders Pressure zone PERFORMANCE2 package End trimming unit PK25 Rough trimming unit BF10 (I-HM straight cutter set) Profile trimming unit FF32 top/bottom WD60 with FLEXTRIM quick-change system (2 radii) Multi-scraper MN21 automatic with profile knife set Cleaning agent spraying unit Glue joint scraper FA20 BASIC Buffing unit FP10 top and bottom PowerControl PC23 PowerTouch control system TAPIO Ready Ethernet network connection Wired manual control for setup operation Software package WOODCOMMANDER with MMR data logging, ToolManager, speed adjustment for track control, and full diagnostic functions Documentation in Slovenian (digital and paper format) Remote service enabled

Condition: reconditioned (used), Year of construction: 2014, Immediately Available: Traveling Column Machine FS 2100 • Total travel in X axis: 21,000 mm – ideal for flexible large-part machining • Travel distances: X = 21,000 mm, Y = 1,500 mm, Z = 3,500 mm • iTNC 530 control with wireless HR 550 FS handwheel, operator cabin on the traveling column • 2-axis NC universal drilling/milling head, fully simultaneous and positioning mode per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar • Dust protection packages for the safeguarding of guideways and drives • BA 4 per traveling column • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor located on the rear of the system • Process monitoring with ToolScope basic system • Additional control panel on the rear of the system • Partial enclosure of the working area and sheet metal door, rear side equipped with a safety fence for unobstructed view into the work area • Including fixators • Cooling aggregates • Including internal tool cooling (closed-loop system) with cooling unit Fedpfx Aoy Nbvxsd Nsgb • Short delivery time, immediately available – subject to prior sale – Inspection possible by appointment Spindle hours: approx. 9,079 SPECIAL PRICE!

Condition: reconditioned (used), Year of construction: 2014, Immediately available: Traveling column machine FS 1200 • Total travel X=12,000 mm, ideal for flexible large-scale machining • Travel X=12,000 mm, Y=1,500 mm; Z=3500mm • Control iTNC 530 with wireless radio handwheel HR 550 FS, operator cabin on the traveling column • 2-axis NC universal drilling, milling head, fully simultaneous and positioning operation per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • IKZ air up to 6 bar • Dust protection packages to protect the guides and drives • BA 4 per traveling column • Radio measuring probe RMP 60, Renishaw make • Work area monitoring with network camera and monitor on the back of the system • Process monitoring ToolScope basic system Fjdpey Nbvrsfx Ad Nsgb • Additional control panel on the back of the system • Partial housing consisting of work area and sheet metal door, back with protective fence with a clear view into the work area • incl. fixators • Cooling units • incl. internal tool cooling (closed cooling circuit) with Cooling unit • short delivery time, available immediately, ---subject to prior sale--- Viewing possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!

Condition: reconditioned (used), Year of construction: 2014, Available immediately Moving column machine FS 480 - Total travel X=4800 mm, ideal for flexible machining of large parts - Travel X=4,800 mm, Y=1,500 mm; Z=3500 mm - iTNC 530 control with wireless HR 550 FS radio handwheel, operator's cabin on the traveling column - 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation per traveling column - HSK-A 100 spindle, 10,000 rpm, 220 Nm spindle torque - IKZ air up to 6 bar - Dust protection packages to protect the guides and drives - BA 4 per traveling column - Radio measuring probe RMP 60 Renishaw - Work area monitoring with network camera and monitor at the rear of the system - Process monitoring ToolScope basic system - Additional control panel at the rear of the system - Partial enclosure consisting of work area and sheet metal door, rear with safety fence with unobstructed view into the work area - incl. fixators - Cooling units - incl. internal tool cooling (closed cooling circuit) with cooling unit - short delivery time, available immediately, subject to prior sale Inspection possible by arrangement Spindle hours: approx. 9079 Fgjdpfx Asy Nbu Iod Nob SPECIAL PRICE!!!

Condition: excellent (used), Year of construction: 2012, operating hours: 15,700 h, functionality: fully functional, punching force: 16 t, total height: 2,155 mm, total width: 4,130 mm, total length: 5,840 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, working range: 1,250 mm, type of input current: three-phase, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,250 mm, workpiece weight (max.): 150 kg, overall weight: 8,000 kg, space requirement width: 4,130 mm, space requirement length: 5,840 mm, feed length X-axis: 1,250 mm, feed length Y-axis: 1,250 mm, Equipment: safety light barrier, For sale: 1x TruPunch 1000 Compact Edition (1250 mm x 1250 mm) - Only 15,700 operating hours! - Brush table - Year of manufacture: 2012 - 10 tool stations, 2 clamps - Control system based on Bosch CML45 with 15" TFT color display - Dual-beam light barriers The machine was purchased directly from Trumpf in 2015. It was originally a 2012 demonstration machine, previously used in Trumpf’s training workshop (very low hours there). Subsequently, it was operated in our facility in single-shift production for manufacturing welding equipment enclosures, which accounts for the low total of only 15,700 operating hours. It has been used exclusively for light sheet metal, primarily mild steel sheets of 1.25 mm and 2.0 mm thickness, and occasionally 3 mm. No heavier materials processed. No known defects; the machine is still in use and will be available from May 2026. Reason for sale: discontinuation of production. The “Compact Edition” of the TP1000 is optimized for part sizes up to 1250x1250 mm. Larger formats are possible using the “repositioning” function, which requires additional tables. The standout advantage of the “Compact” design is its minimal footprint of just 4.13 x 5.84 m. The machine is equipped with almost every available option: Fgjdsy Iv I Tepfx Ad Nob - MultiShear function - Thread forming function - Marking/Fast Beading function - Deburring and rolling technology - Part chute sensor Asking price for the machine: €42,000 plus VAT. Excludes accessories, price ex-works, loading and transport at buyer’s cost. Machine available from May 2026. Optional programming and accessories: - Fully configured workstation (PC) with installed software. Only needs to be connected to the network and is immediately ready for use (saves significant time & money). “TruTops Punch” accessible via network - 10 RTC cassettes - 2 MultiTools with 5 tools each (ideal for this machine!) - Various tools (including 2 x louver tools, round, rectangular, and slitting tools) - Tool adjustment aid Asking price for accessories: €3,000 plus VAT.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 2,240 mm, cutting width (max.): 4,300 mm, saw blade diameter: 300 mm, saw blade bore: 30 mm, We offer this Striebig CONTROL 18 5224 vertical panel saw in very good condition, year of manufacture 2021. The valuation report is attached. Model: 5224 Cutting range – length: 4300 mm Cutting range – vertical height: 2240 mm Cutting range – horizontal height: 2100 mm Max. material thickness: 80 mm Rated voltage: 400 V Frequency: 50 Hz Feed speed: 10–25 m/min Standard machine equipment: • One-piece steel frame • Roller track with automatic brake • Frame-integrated dust extraction system • Automatic recognition of the central stop • Additional comfort features for easy operation • Horizontal laser cutting line display • Operation via 12" touchscreen • Optimal support surface over the entire cutting area • Automatically swiveling steel-wood support (table) • Frame-integrated small-format support • Carbide saw blade diameter: 300/30 mm • Saw enclosure sound insulation system • 5.5 kW (S6) main drive motor • Electromagnetic motor brake • Automatic beam locking • Precise unit positioning via button • Automatic cutting unit locking • Automatic saw plunge • Automatic unit rotation • Hour meter • Digital DMS measuring system on X and Y axes, horizontal and vertical Expert Cut package: • Electronic dimensioning system on X-axis • Automatic positioning of the saw beam with unit • 12-inch control screen • Striebig optimization software • Label printer Fodpfjy N Sf Rsx Ad Nogb • Option for company network connection The set includes a KOGI chip extractor 2.2 kW / 1650 Pa. If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), functionality: fully functional, The AERA blue-cord slicer optimizes industrial preparation with efficiency. Designed for fast, accurate cutting, it uses multiple ribbon slicers to guarantee uniform results. In addition, the trim conveyor handles products before cutting, while the blue-cord folder shapes each product perfectly. With its pneumatic control system and belt scrapers, the slicer ensures high performance. What's more, the titanium cutting carriage, equipped with automatic lubrication, reduces maintenance requirements. In conclusion, the AERA model improves both quality and production efficiency, while complying with industrial requirements. Fsdpfxsu Ivcie Ad Njgb COMPOSITION : FILLING CONVEYOR Overall dimensions (L x W x H): 6400 x 1000 x 970mm. Weight: 970 Kg Sliding surface height: 960 +/- 50mm. Stainless steel tubular legs and jacks Synchronous belt width 600mm. Lyre-shaped winding Pneumatically-operated belt quick-release system Servo-motor control with positioning register. Belt scrapers TRANCHEUR Overall dimensions (L x W x H): 1880 x 1030 x 2460mm Weight: 1000 Kg Stainless steel frame: 20 mm Stainless steel panel housing with magnetic safety sensor and pneumatic locking during operation. Components : The slicer is equipped with 4 magazines consisting of : 4 synchronous pinned belt conveyors controlled by a servomotor 4 chutes defined according to the products to be sliced pneumatic control of chute release from loading belts CUTTING CARRIAGE Cutting is performed by a ribbon blade on 2 titanium 200 flywheels mounted on a titanium crosspiece The cutting carriage is guided by "Hepco inox" rails and rollers The cutting motion is driven by a Sew Usocome servo-reducer, a through shaft and two connecting rod-crank systems. The flywheels are driven by a Sew Usocome geared motor equipped with a transmission shaft and an expanding pulley for constant V-belt tension. A torque-limiting tensioning system enables correct adjustment of the tension on the ribbon blade. Cutting blade lubrication is provided by an automatic gun fed by a low-pressure water network. INFEED CONVEYOR : Slabs are received and distributed by a two-ply polyurethane belt conveyor driven by a Sew Usocome servo-reducer. Product deposited by a 16 mm diameter saber at the end of the conveyor. Quick belt release system. Open-worked bottom for easy cleaning. Conveyor made entirely of stainless steel.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 33 m/min, overall weight: 7,400 kg, spindle speed (max.): 11,000 rpm, number of slots in tool magazine: 28, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The used and REFURBISHED AKIRA SEIKI 4.5 XP vertical machining center is a 3-axis continuous CNC machining center suitable for small/medium-sized parts. It features a 1300×600 mm table, travel: X 1,150 mm, Y 640 mm, Z 660 mm. Year of manufacture: 2017. CE compliant, equipped with FANUC 0i-MF CNC, rapid feedrates at 33 m/min and working feedrates at 12 m/min, weight 7,400 kg. Fitted with a 40-taper milling spindle, 11,000 rpm, 27 HP, refrigerated by dedicated chiller, belt-type chip conveyor, high-pressure through-spindle coolant system, random tool changer with 28 positions, USB port, memory card slot, RJ45 Ethernet network port. Fodpfx Aeyt Sanjd Negb The machine has been refurbished, including axes and a brand new complete spindle line, with 0 working hours. FULLY OPERATIONAL!

Condition: used, Year of construction: 1996, pressure 0050 t chamfer lenght 1270 mm distance between columns 1040 mm stroke 215 mm throat 410 mm dayligth 385 mm back stop - adjustable 860 mm working feed 1 - 10 mm/sec return speed 135 mm/sec total power requirement 8,6 kVA weight of the machine ca. 4750 kg Fgsdpfx Adjy Hxmij Njb dimensions of the machine ca. 2000 x 2100 x 2400 mm - controlled axes: Y1, Y2, X, R - Pneumatic die shift - hydraulic WILA/TRUMPF upper tool clamp - hydraulic WILA/TRUMPF lower tool clamp - LAN network connection - 4 stop fingers manually adjustable, foldable to the rear, pneumatic clampable - CNC control, operation on the front left - 2-hand operation / foot switch - rear + side protection

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 4,000 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 280 mm, spindle motor power: 30,000 W, overall weight: 6,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2000. This Monforts RNC 400 AC features a turning length of 600 mm and a swing over bed of 410 mm. It is equipped with a 12-station disc turret and a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 AC machine we have for sale. Contact us for further details. • CNC memory: 256 kB (buffered RAM), expandable to 1.5 MB • Programming language: DIN 66 025 with high-level language extensions • Swing over bed: 410 mm • Swing over cross slide: 280 mm • Turning length: 600 mm Fodpfx Adjy Ifptj Nogb • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 • Material clearance (bar capacity): 65 mm • Max. torque: 500 Nm • Axes/feeds: AC servo drives with electronic safety monitoring; rapid traverse X/Z 24/24 m/min; feed force X/Z 7.2/10.7 kN • Turret: 12-station disc turret (DIN 69880/VDI 3425/2), 40 mm shaft diameter • Driven tools: 12 stations; max power 13.6 kW (25% ED); max torque 28.9 Nm; max speed 4500 rpm • C-axis: 0–25 rpm; 300 Nm holding torque • Tailstock: Separate guide rail; manual clamping; 900 mm travel; 90 mm quill stroke; 12,000 N force (adjustable); MT3 • Hydraulic system: Central pressure oil supply for hydrostatics and clamping • Cooling: 310 L tank; reinforced coolant pump (3 bar, 40 L/min) • Bed: 60° slant bed; steel welded construction on reinforced concrete base with 3-point support • Power requirements: 3x400 V, 50 Hz; total connected load 20.5 kW (41 kVA) Additional equipment • Hydraulic hollow clamping device • Parts catcher • A6 drawtube for collet chuck • 200 mm suction nozzle • 1 GB storage expansion • Network card • Driven tools with tapping without compensation chuck Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Weiss Technik SaltEvent Type: SaltEvent SC/UKWT 1500 Operating hours: approx. 11,889 h Year of manufacture: 2022 Recirculating Air Corrosion Change Test Chamber / Salt Spray Test Chamber For sale is a high-quality Weiss Technik SaltEvent SC/UKWT 1500 suitable for corrosion, salt spray, condensation water, and climate change testing applications. The unit is ideal for use in industry, research, development, and quality assurance. Technical Data: Manufacturer: Weiss Technik GmbH Type: SaltEvent SC/UKWT 1500, with ring flushing line Year of manufacture: 2022 Test chamber volume: approx. 1,450 liters Temperature / Climate Data: Temperature range (climatic test): +23°C to +70°C Humidity range: 20% to 98% r.h. Dew point range: +12°C to +69°C Salt spray test: ambient temperature +5 K to +50°C Condensation water test: ambient temperature +5 K to +42°C Electrical Data: Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: 9.8 kW Fgodpfey Hkg Iex Ad Nob Rated current: 18 A Refrigerant as per nameplate: R134a – 1.30 kg – GWP 1430 CO2 equivalent: 1.86 t LP max.: 17 bar g HP max.: 25 bar g Media Connections: Compressed air / GN2: max. 12 bar Deionized water: min. 3 bar / max. 5 bar Water connection for ring flushing line: max. 6 bar Condensate drain available Exhaust air connection available Power supply: 3/N/PE 400 V / 50 Hz Dimensions (according to drawing): External dimensions: approx. 3710 x 1537 x 1769 mm Test chamber length: approx. 2365 mm Loading height: approx. 850 mm Weight (according to nameplate): approx. 710 kg Operating hours (as indicated): approx. 11,889 h Equipment / Features: S!MPAC / WebSeason touch control panel Ethernet / Network connection USB interface Salt spray Condensation water test Dry climate Climate / humidity operation Ring flushing line Storage tank Rod inserts Control cabinet integrated Exhaust air connection Compressed air connection Connection for deionized water Water connection for ring flushing line Condition: used Unit is fully visible as per the images provided. Current status: external operating mode. Display notice: hood not closed. Scope of delivery: Weiss Technik SaltEvent SC/UKWT 1500 Scope of delivery as shown in the images Inspection by appointment is possible. Loading can be organised. (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, Year of construction: 2021, only 24 operating hours – like new Base machine 1 pc Cutting technology meets the future The CONTROL series has always defined its own class – the premium class for vertical panel saws. But even this lead never stands still. We have developed the CONTROL into a vertical panel cutting centre of the premium class, with higher automation of the sawing process and additional equipment options. Above all, the 12" touchscreen computer and new machine software provide improved user comfort in every detail. Fgsdpfxeyyqz Se Ad Neb Saw Frame • Precision manufacturing to 1/100 mm in key components • Massive, self-supporting welded saw frame with high torsional rigidity • Full-surface support panel made of birch plywood with integrated small parts shelf • Auxiliary stop profile with its own tape measure and 3 auxiliary stops for repeat cuts • Automatic detection of the center support • Automatic roller lock during the cutting process Saw Beam • Stable, durable steel saw beam construction • Automatic saw beam locking with cut position detection Saw Unit • Play-free, smooth-running guides • Robust motor carriage bearings ensure high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Enhanced operator comfort thanks to largely automated operation • Laser-assisted display of horizontal cuts • Automatic clamping of the motor carriage • Automatic plunging and swiveling of the saw motor • Pneumatic clutch for quick change to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake Control System • 12" touchscreen computer with optimal user guidance • Multilingual user interface • Tool database for high flexibility and absolute repeat accuracy • Fully automatic sawing process • Variable feed speeds from 10–25 m/min • Selectable saw cycle • Panel end detection • Constant return speed • Operating hours counter • Network connectivity Dimension Adjustment • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y including ABO (vertical axis for horizontal cuts) Design, Ergonomics • STRIEBIG’s signature product design • Multiple awards (including the Swiss Design Award) • Functionality and operator-friendly ergonomics Installation • Wall-mounted or free-standing (option) installation possible Note: Permissible ambient temperature: min. +5°C / max. +40°C Relative humidity: 19–95% If mains voltage fluctuations exceed ±10% of the nominal voltage at the installation site, a voltage stabilizer must be used. Type 5216 Cutting range 4300x2160/2016x80mm 1 pc Cutting length: 4300 mm Cutting height vertical cut: 2160 mm Cutting height horizontal cut: 2016 mm Max cutting depth: 80 mm Min cutting depth (automatic feed): 4 mm Min cutting depth (manual feed): 2 mm Exact installation dimensions can be found in the brochures or installation diagrams. ProLock Easy-Fix tool clamping system 1 pc Electronic positioning system "EPS-X" (horizontal axis for vertical cuts) 1 pc Paper holder 1 pc Small parts support, aluminum (2 pieces) 1 set Kit for free-standing installation (Types 5168, 5216, 5224, 6168, 6216, 6224) 1 set Storage location: Customer

Condition: excellent (used), Year of construction: 2017, operating hours: 5,120 h, functionality: fully functional, travel distance X-axis: 7,800 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 655 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 40 m/min, torque: 12 Nm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Axis Travel Ranges X-AXIS (longitudinal): 7,800 mm Y-AXIS (lateral): 1,100 mm Z-AXIS (vertical): 655 mm B-AXIS (vertical-horizontal rotation of the machining head): 0° ÷ 90° C-AXIS (vertical rotation of the machining head): 0° ÷ 360° Traverse Speeds X-AXIS: 75 m/min Y-AXIS: 60 m/min Z-AXIS: 40 m/min B-AXIS: 3,240 °/min C-AXIS: 3,600 °/min Axis Acceleration X-AXIS: 3 m/sec² Y-AXIS: 3 m/sec² Z-AXIS: 2 m/sec² Motor Spindle Max. power in S1: 15 kW Max. speed: 24,000 rpm Max. torque: 12 Nm Tool holder: HSK – 63F Spindle encoder for rigid tapping Water cooling with cooling unit Automatic Tool Changer Standard for 16 tools Maximum permissible tool size in standard magazine: Ø = 80 mm L = 300 mm Maximum permissible saw blade size in standard magazine: Ø = 180 mm L = 150 mm Saw blade magazine for max. saw blade Ø = 500 mm L = 73 mm Processable Profile Sides With tool without angle head (profile top, profile sides, end faces): 5 With saw blade, Ø = 500 mm (profile top, profile sides, end faces): 1 + 2 + 2 Fgedpfx Ajy Iqr Tod Nsb Thread Cutting Performance (with tap on aluminium and through hole) Rigid tapping: M12 Larger threads possible with thread milling cutter Profile Feeding 2 reference stops with fixed positions Functions Dynamic pendulum mode Processing of overlengths up to max. double the machine length (X axis) Cutting and separating of the bar (not with 2-bar parallel operation) Automatic operation: milling and cutting (not with 2-bar parallel operation) Workpiece Clamping Standard equipment pneumatic clamping elements: Versions dynamic and static 7,800/6 Max. number of pneumatic clamping elements: 12 6 clamps per zone, movable along the entire machine range Max. profile width, Y, with standard tool clamping: 550 mm Motorized clamping device Absolute measurement of clamp position Safety Devices and Protective Equipment Light curtain system for workspace access protection 3-sided metal safety fence Full machine enclosure by accident and sound protection cabin Internal lighting Protective cover made of laminated safety glass Machine Structure Monoblock machine frame made of electro-welded and normalized steel Chip conveyor with steel belt on the right side of the machine Machining Unit Portal construction Motor spindle controlled on 5 axes, simultaneous interpolation possible Minimal quantity lubrication system (oil) Central lubrication system for guides Operation and Control Control cabinet with cooling unit Pneumatic control cabinet CNC with real-time control MG-Pilot Industrial PC with touch screen Atom 1600 processor 15” graphic LCD-TFT color display Keyboard, mouse 1 Gbyte RAM 4 Gbyte Compact Flash card 4 USB ports RJ45 network card Software Microsoft® Windows® Embedded Bidi-CAM DRILL Power Supply (Voltage/Phases/Hertz) 400V/3PH/50Hz Software for Machining Center Control CAMPLUS for SATELLITE XT, graphical programming software for machining with 3D visualization SHAPE, software for creating any freeform machining contours