Used Amc Mechanization for sale (5,179)

Condition: used, functionality: fully functional, Engine lathe, manufacturer WEILER Technical data: Distance between centers approx. 500 mm Center height above bed: 125 mm Cjdpfx Apeyzrnpoporc Infinitely variable spindle speeds: Range 1: from 160 – 900 rpm Range 2: from 320 – 1800 rpm

Condition: used, functionality: fully functional, Technical data: Distance between centers approx.: 500 mm Center height over bed: 125 mm 16 spindle speeds Range 1: from 110 – 900 rpm Range 2: from 440 – 3600 rpm Space requirement, length x width: 1.2 x 0.6 m Estimated weight approx.: 400 kg Crsdpfxsyzggae Appec

Condition: excellent (used), 2 identical DEMAG hoists / electric wire rope hoists P625 H8 2/1, load capacity 5t, and P35 H8 2/1, load capacity 5t. Both equipped with fine lifting FG24 and 5t lower block. Both units underwent a complete general overhaul at the same time in 08/2003! Stored since then, without documentation, though the gear type plate contains the relevant information. Codpfxjv T Twko Appsrc

Condition: used, tilting depiler for 6-meter packages, discharge chains, four-sided feeder with striking wheel, moulder outfeed with stacker, price on site not dismantled Crodpfxeyw S Rvs Appoc

Condition: used, sheet width 2500 mm plate thickness 3,0 mm Crodpfx Apeyv I H Depoc distance between columns 2550 mm back stop - adjustable max. 510 mm weight of the machine ca. 1,8 t dimensions 3,3 x 1,4 x 1,8 m

Condition: good (used), Year of construction: 1963, cutting length 2500 mm plate thickness 3 mm distance between columns 2050 mm blade length 2650 mm total power requirement 3 kW weight of the machine ca. 2,5 t - The scissors are equipped with an adjustable stop on the back. stop. Each side is equipped with a millimetre counter, so that the guarantee that the cuts are true to size. - Spring-loaded automatic hold-downs prevent the material from shifting during Crsdpeul Eixjfx Appsc the cutting process. material during the cutting process.

Condition: good (used), sheet width 2000 mm plate thickness 2,25 mm distance between columns 2040 mm Crsdpfx Aeul Ei Eeppoc total power requirement 7,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,2x1,7x1,1 m SN-No. 380/6

Condition: new, Year of construction: 2026, Quick reverse movement, high cutting capacity with low power Strong steel welded frame structure Maintenance-free guides and bearings. Operating pedal, safety buttons Front material support up to 920 mm Crjdpol Exypefx Appsc 5m 32Amp cable to power the machine CE certificate Automatic stop with digital position readout, length 0 - 750 mm with pneumatic sheet support system with rear material pick-up compressed air connection required min. 6 bar

Condition: excellent (used), functionality: fully functional, pressing force: 315 t, stroke length: 400 mm, table width: 2,500 mm, table length: 1,400 mm, ram plate width: 1,400 mm, ram plate length: 2,450 mm, die cushion force: 63 t, die cushion stroke: 160 mm, distance between stands: 2,500 mm, ram adjustment: 400 mm, PKZZ I 315.1 is a heavy-duty single-action mechanical press with a two-point drive system, designed for high-precision forming of large sheet metal parts. The rigid two-column frame ensures excellent stability and even load distribution across the working area. Crjdoyx Evzjpfx Appoc The press is in excellent condition and still under power.

Year of construction: 2026, condition: new, Motorised Tilting KETTLES Frying Pan with Scraper, tiltable, made entirely of stainless steel for food preparation, which can be unloaded onto trolleys by means of motorised tilting, maintaining the height of the unloading mouth It is manufactured with a double thermal oil bottom and an inner tank that is easy to clean by means of a removable remover with blades that rub against the walls to prevent the product from sticking and subsequent cleaning. It is double-sided with a total thermal insulation coating to save energy. Technical features: It has a control panel with electronic touch screen for programming, speed control and direction of rotation of the scrapers, frying temperature, frying time and recipe programme. Acoustic warning system at the end of the programme. Automatic emptying of the product by means of a button on the panel. Models SBE100A, SBE150A and SBE200A are fitted with castors. Stainless steel feet with height adjustment on models SBE300A and SBE500A. The electric models have armoured heating elements immersed in thermal oil that produce homogeneous heating throughout the frying pan. Crjdpfxeg A Rhgj Appoc The gas models have very precise ventilated burners, electronically controlled, which can be LPG, NG or Diesel. Adjustable temperature from 50 to 210ºC. Recipe book on programmable electronic board. Capaciti 10, 24,50,100,150,200,300 y 500 L. Price from 4989€

Condition: good (used), Year of construction: 2007, sheet width 1350 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 35 Hub/min cutting angle 2.0 Grad table height 945 mm distance between columns 1361 mm Control CIDAN / SIEMENS engine output 5.5 kW weight of the machine ca. 1400 kg range L-W-H 2200 x 2000 x 1550 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - NC electro-motorized backgauge, with digital display * Target / actual value stop value input * stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop Codpfx Apoyuzcusporc - recessed grips in the front support table - Manual cutting gap adjustment from the front - Rear sheet holding device for thin sheets - 1x freely movable foot switch - Operating instructions (PDF)

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 25000 € 480 € 2050 mm 6 mm Cedewp S Swopfx Apporc 30 1/min 2.3 ° 750 mm 7.5 kW 800 mm 530 mm 2355 mm 2720 mm 1630 mm 1230 mm 3200 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection

Condition: used, Year of construction: 2012, operating hours: 600 h, functionality: fully functional, total length: 3,100 mm, sheet thickness aluminum (max.): 3 mm, overall weight: 4,650 kg, Equipment: documentation/manual, Mechanical CNC folding machine CIDAN Futura 30 Year of manufacture: 2012 Technical data: Working length: 3100 mm Max thickness of steel sheet: 2 mm Max thickness of stainless steel sheet: 1.25 mm Max thickness of aluminium sheet: 3 mm Beam opening: 195 mm Bending beam motor power: 2.2 kW Clamping beam motor power: 2.2 kW Machine dimensions: length 4100 mm, width 2300 mm, height 1845 mm Weight: 4650 kg Equipment: CNC control with ProLink S graphics Crsdpfx Ajx Tv T Heppoc Powered rear stop type SBG 15-30-T-30L-20R Rotating upper beam type COMBI MULTIFOLD – segmented lower and bending beam tools with SBG 15 table, height adjustable 0–45 mm Mechanical adjustment of the gap between beams Bending beam bar 10 and 20 mm with quick clamping system Lower beam bar Manual crowning compensation of bending beam Three-button foot pedal Info: Price of a new machine with the above-mentioned equipment: 122,900.00 EUR + VAT

Condition: used, Punching Machine MUHR & BENDER - MUBEA Type KL 350 / 203 Machine No. Year of manufacture 19 Punching force 35 tons Throat depth 203 mm Ram stroke 22 mm Capacity Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate 117 x 70 mm Table plate 175 x 100 mm, thickness 100 mm Drop-through opening in table cutout Ø 56 mm Stroke release Single stroke via foot switch Csdpfx Apeyvvkwopsrc Motor power 1.5 kW Power supply 400 Volt, 50 Hz - Electric foot switch for stroke release - Manual lever positioning device for punch movement - Equipped with a Ø 8 mm punching tool - Support tables approx. 270 x 230 mm each on left and right of punching unit - Metal base frame Space requirement L x W x H 750 x 720 x 1500 mm Weight 430 kg In very good condition

Condition: used, functionality: unexamined, overall weight: 440 kg, total length: 1,090 mm, total width: 520 mm, total height: 530 mm, volume flow: 8,358 m³/h, input voltage: 380 V, input frequency: 50 Hz, Used Edwards PXH6000 Mechanical Dry Booster Vacuum Pump System Manufacturer: Edwards Credpfxsv Diq Uo Appjc Model: PXH6000 Voltage: 3~380-460V(50-60Hz) Weight: 440KG Dimensions: 109 x 52 x 53 Displacement: up to 8358 m³/h

Condition: used, L + Z Lathe WEILER Model Praktikant 800R Machine No. 3309 Year of manufacture: 1984 Centers distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and cross Chuck mounting: Short taper DIN 55027 size 5, 4x M10 Tailstock taper: MT 3 Tailstock quill travel: 90 mm Spindle speed: 42 – 2000 rpm Drive power: 1 / 1.6 kW Crodpsyg Rfiofx Appec Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gear steps - 3-jaw scroll chuck BILSING Ø 160 mm with 1 set of stepped jaws and 1 set of soft jaws - MULTIFIX quick-change toolpost size A with 3 exchangeable toolholders - Live center - Emergency stop - Folding chuck guard - Coolant system - Operating manual with electrical schematic - Very low operating hours Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 600 kg Very good condition

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2581 Year of manufacture: 1984 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle speeds via 12-step gearbox - 3-jaw scroll chuck AROWA Ø 200 mm (only one set of chuck jaws) - Multifix quick-change tool post, size B, with 3 tool holders - Automatic longitudinal and cross feed - Coolant system - Spindle brake - Emergency stop - Splash guard - Fixed steady rest Ø 160 mm - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1500 kg In very good condition Crsdpfx Apjyah Rvepoc

Condition: used, Year of construction: 1980, sheet width 2540 mm plate thickness 2 mm thickness at "Niro-steel" 1,25 mm no. of strokes 63 Hub/min cutting angle 1,13 ° table height 750 mm table width 320 mm back stop - adjustable 5,0-550 mm total power requirement 3 kW weight of the machine ca. 1600 kg Equipment: - manual backgauge, with analog display Crjdpoyv N I Aofx Appjc * Adjustable from the front * stepless adjustment over the entire travel range - 1x long side stop - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks

Condition: used, Year of construction: 1986, sheet width 2540 mm plate thickness 2 mm thickness at "Niro-steel" 1,25 mm no. of strokes 63 Hub/min cutting angle 1,13 ° table height 750 mm Crsdpfxoyv Nn As Appsc table width 320 mm back stop - adjustable 5,0-550 mm total power requirement 3 kW weight of the machine ca. 1300 kg Equipment: - manual backgauge, with analog display * Adjustable from the front * stepless adjustment over the entire travel range - 1x long side stop - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks

Condition: good (used), Used Pinacho L1-260 lathe Distance between points: 1625 mm Max. turning on bed: 520 mm Length of neckline: 350 mm Tilting on longitudinal carriage: 470 mm Csdpfxjudw Iij Appsrc Turning on the transversal carriage: 320 mm Swing in dive: 770 mm Reed pitch: 68 mm Main engine power: 7.5 hp *It will be delivered with 3-jaw chuck. *Price can be requested with or without CE regulations.

Condition: used, sheet width 2500 mm plate thickness 4 mm distance between columns . mm Crodpeyr Skwsfx Appjc The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine just arrived and will be cleaned soon. turning diameter over bed: 400mm distance between centers: 1000mm spindle size: 50 mm chuck size 200mm speed range 40 rpm to 2000 rpm Crodpfx Apsyh Ndwjpoc machine weight: 1700kg including 3 jaw chuck and tool holder

Condition: used, L + Z Lathe WEILER Type Praktikant 800R Machine No. 3315 Year of manufacture: 1984 Center distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and face Chuck mount: short taper DIN 55027 size 5, 4x M10 Tailstock taper: MK 3 Csdpfx Asyr R Dcspperc Quill travel: 90 mm Spindle speed: 42 - 2000 rpm Drive power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gearbox steps - 3-jaw scroll chuck RÖHM ZS Ø 160 mm with 1 set of stepped jaws - MULTIFIX quick-change tool post size A with 3 tool holders - Emergency stop - Hinged chuck guard - Operating manual with electrical diagram Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 560 kg Good condition

Year of construction: 2026, condition: new, Compact and reliable mechanical decoilers for light and medium coil handling with multiple capacity options. Bosporas Machinery is a manufacturer of coil processing and press feeding systems, delivering high-performance and customized industrial solutions worldwide. Our mechanical decoilers are designed for efficient, stable and cost-effective coil handling in various industrial applications. These machines offer reliable unwinding performance with compact design and easy operation, making them ideal for press feeding lines and light coil processing systems. The system is based on a mechanical expansion mandrel structure combined with motor-driven rotation and adjustable speed control, ensuring controlled and stable coil feeding. AVAILABLE MODELS 750 kg Mechanical Decoiler 2.500 kg Mechanical Decoiler 4.000 kg Mechanical Decoiler TECHNICAL RANGE Coil Weight Capacity: 750 kg – 4000 kg Coil Width Range: 20 mm – 1300 mm (depending on model) Coil Outer Diameter: 700 – 1300 mm Coil Inner Diameter: 300 – 630 mm / 480 – 600 mm (model dependent) ENGINEERING FEATURES Mechanical expansion mandrel system Motor-driven rotation system Frequency inverter controlled speed adjustment Cedpfoyzd I Ijx Appjrc Belt and pulley transmission system Brake-controlled mandrel system Right-to-left / left-to-right operation capability OPTIONAL FEATURES Pneumatic upper arm (snubber arm) system Coil hold-down system Custom mandrel configurations Integration with press feeding systems OPERATIONAL ADVANTAGES Compact and space-saving design Cost-effective solution for light and medium coils Easy installation and operation Low maintenance requirements Flexible configuration options APPLICATION AREAS Press feeding lines Stamping and metal forming Sheet metal processing Roll forming lines General industrial applications REFERENCE & EXPERIENCE Images included in this listing show reference installations of similar mechanical decoilers successfully manufactured and commissioned in different countries. These references demonstrate our proven engineering capability and international project experience. Additional references and technical details can be provided upon request.

Year of construction: 2013, condition: used, functionality: fully functional, B+B Anlagenbau TR 100/200-P-V – Mechanical Dryer – Good Condition – Dismantled in Working Order For sale: B+B Anlagenbau type TR 100/200-P-V. The machine is in good condition and was dismantled while fully operational. Technically sound; only normal wear parts show wear. Worn wear parts: - Screens - Screen support edges (mounting frames) - Sealing rubbers The paddles inside the machine are still in good condition. A large number of spare paddles are included in the sale. Main drive motor: 55 kW Additional loose parts included: - Spare drive motor - Main bearing (2x) Codpfxjym Ag Ej Appjrc - Fan housing - Pulley - Gearbox for screen scraper drive Please note: No spare screens are included. However, contact details of the supplier for the screens and screen support edges will be provided. Machine is available immediately.