Used Angulus 3000 Mm for sale (75,545)

Condition: good (used), Year of construction: 1972, Scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -Manufacturer: Lödige, scissor lift table -Load capacity: 1000 kg -Platform: 3000 x 2000 mm -Dimension retracted: height 390 mm -Dimension extended: height 2000 mm Nodpfomghawjx Aa Islc -Hydraulic unit: Bauknecht 3 kW / 150 bar -Transport dimensions: 3000/2000/H390 mm -Own weight: 2100 kg

Condition: good (used), Roller conveyor, conveyor track, roller conveyor belt, roller track, saw roller block, saw roller block, saw horse, saw roller conveyor, length stop, longitudinal stop, saw stop, material stop, motorized length stop, controlled length stop, roller conveyor, conveyor track, roller conveyor belt, roller track -Length stop for: saws -with: stop by hand in longitudinal direction Nledpfx Asd D R Syoa Ijc -with: Side stop movable via hydraulic motor in transverse direction -Display via: SIKO mechanical position indicator -Roller conveyor: Ø 80 x 1340 mm -max. stop length: 2950 mm -Roll spacing: 300 mm -Dimensions: 3000/1640/H940 mm -Weight: 534 kg

Condition: good (used), Fork carrier, forklift blade, pallet fork, forklift fork, for wheel loader, forklift, telehandler, forklift -Fork carriage: with forks -Load capacity: 12,000 kg -Make: Still -Forks: length 1600 mm / 200 x 100 mm -Installation dimensions: see photos Nedpou Inqfefx Aa Islc -Dimensions total: 3000/2100/H1530 mm -Weight: 2480 kg

Condition: used, Alignment ruler, alignment rail, steel ruler Nodofiqrqjpfx Aa Iolc -Angle: 90° -Dimensions: 3000/100/H15 mm -Weight: 28 kg

Condition: used, Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, accumulation roller conveyor -Roll width: 600 mm -Conveying length: 3000 mm -Diameter roller: 80 mm -Center distance: 200 mm Nsdpedct Alsfx Aa Iolc -Height: 280 mm -driven: via round belts -Geared motor: 0.55 kW -Speed: 7.5 m/min -Number: 1x roller conveyors available -Price: per piece -Dimensions: 3000/660/H280 mm -Weight: 136 kg

Condition: excellent (used), Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: round wire link belt stainless steel -Width: 600 mm -Length: 3.0 m -Transport dimensions: Ø 110 x 600 mm -Weight: 4.2 kg Nljdpfxjwv Nl Ie Aa Isc

Year of construction: 2026, condition: excellent (used), Maize leveling blade, silo leveling blade, maize leveling blade Nodpfx Asb A H Adoa Ielc -The shield is rounded for better material flow -Working width: 3000 mm -Sign height: 1250 mm -Wall thickness: 18 mm -Delivery time about 2 weeks -Weight can be made according to customer requirements -Weight: approx. 1000 kg

Condition: good (used), Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Tool radius: 10 mm -Dimensions: 45 x 190 mm -Length: 3000 mm Nsdpfx Aaob A Rqgs Islc -Weight: 240 kg

Condition: good (used), Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool for: Press brake -Dimensions: 3000/30/H116 mm Nedpjfiqrnefx Aa Ijlc -Weight: 48 kg

Condition: good (used), Hommel Dura measuring plate / control plate made of natural hard stone Hommel Dura measuring plate made of hard stone (granite plate) length: 3000 mm width: 1000 mm thickness: 300 mm 1 x T-slot More measuring plates in other sizes - new and used - you will find in our store! Nedpfxjk Shcue Aa Ielc International shipping costs on request!

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP S54 Nljdpfx Aoiivgrea Ijc Four roll bending machine Electronically controlled, electric drive, four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Top roll diameter: 300 mm lower roll diameter: 280 mm Side rolls diameter: 200 mm Guaranteed installed power: 10.8 kW Guaranteed maximum rolling speed: 5 m/min Guaranteed machine weight: 10,000 kg Length: 5,500mm Width: 1,400mm Height: 1,600mm Guaranteed services: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 18 mm Bending performance (full working width) 12 mm from pipe diameter 1500 mm Rolling capacity (full working width) 12 mm Bending capacity (full working width) 10 mm from pipe diameter 450 mm Standard equipment: Electrical drive of the top roll Planetary movement of the side rolls Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rollers for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP 3135 Four roll bending machine Nlsdpfx Aoiivc Dea Iec Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Top roll diameter: 350 mm Lower roll diameter: 330 mm Side rolls diameter: 250 mm Guaranteed installed power: 14.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 13,000 kg Length: 5,700mm Width: 1,800mm Height: 2,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 20 mm Bending performance (full working width) 15 mm from pipe diameter 1750 mm Rolling capacity (full working width) 14mm Bending capacity (full working width) 12mm from pipe diameter 455 mm Standard equipment: planetary movement of the side rollers Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP 3163 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rollers: planetary guide Working length: 3000 mm Top roll diameter: 630 mm Lower roll diameter: 570 mm Nodpfx Aeiivfqja Ijlc Side rolls diameter: 500 mm Guaranteed installed power: 72 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 58,000 kg Length: 6,800mm Width: 3,600mm Height: 3,550mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 70 mm Bending performance (full working width) 60 mm from pipe diameter 3150 mm Rolling capacity (full working width) 55 mm Bending capacity (full working width) 50 mm from pipe diameter 820 mm Standard equipment: Planetary movement of the side rolls Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN HAV 3162 variable three-rolls bending machine Electronically controlled, hydraulic three-rolls bending machine Technical specifications: Number of Rolls: Three Geometry of the side rolls: variable Working length: 3050 mm Top roll diameter: 620 mm Side rolls diameter: 550 mm Pressure force against the top roll: 630 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 55 kW (75 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 45,000 kg Length: 7,600mm Width: 3,700mm Height: 3,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 75 mm Bending performance (full working width) 48 mm from a pipe diameter of 3,100 mm Rolling capacity (full working width) 55 mm Bending performance (full working width) 40 mm from pipe diameter 805 mm Standard equipment: variable geometry with linear guides for rolls movement Extra long release arm for increased frame stability Electronic parallelism system EPS Hardened rolls for high wear protection Nlodpfxjiivgys Aa Ioc All rolls ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel Hitech hydraulic and electric package Simultaneous rotation and rolls movement Safety trip wire with emergency stop and CE certification central lubrication Water cooling for the hydraulics cone bending device Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP

Condition: new, functionality: fully functional, Year of construction: 2026, 4 HEL 3128 Four rolls bending machine Electronically controlled, hydraulic four-rolls bending machine Make FACCIN, model 4 HEL 3128 Technical specifications: Number of Rolls: Four Geometry of the side rolls: linear guides Working width: 3050 mm Top roll diameter: 285 mm Lower roll diameter: 275 mm Side rolls diameter: 205 mm Certified rolls hardness: 950-1050 N/mm² Pressure force against the top roll: 150 tons Working pressure at maximum power: 190 bar Guaranteed installed power: 11 kW (15 hp) Guaranteed maximum rotation speed: 4-8 m/min Guaranteed machine weight: 9,000 kg Length: 5,450mm Width: 1,520mm Height: 1,450mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 12 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,425 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6.5 mm from pipe diameter 370 mm Standard equipment: Double linear guide system for rolls movement Extremely wide bearing blocks MCS double bearing system for the rolls rotation Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection Nljdpfxsiink Se Aa Ioc All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device FACCIN AP package CNC control PGS-ULTRA

Condition: new, functionality: fully functional, Year of construction: 2026, max rolling capacity (cold): mm. 32 max prebending capacity (cold): mm. 24 at diameter mm. 2050 with material yield strength N/mm2 260 working length: mm. 3050 number of rolls: four top roll diameter mm. 410 pinching roll diameter mm. 390 driven rolls : two rotation speed 5 m./min. rolls rotation: hydraulic installed power: 30 PS Voltage 400V, 50Hz, 3Ph Nlsdpjf T Rzfefx Aa Ijc Inkl.: - hardened & polished rolls - cone bending device - electronic rolls parallelism - Siemens PLC Control - CE certificate - control console on wheels

Condition: new, functionality: fully functional, Year of construction: 2026, Three rolls variable axis bending roll Make FACCIN, model HAV/S 3145 Technical specifications: Number of Reels: Three Geometry of the side rollers: variable Working width: 3000 mm Top roller diameter: 450 mm Nedpfx Aajc S N Nqs Iolc variable three-roller bending machine

Condition: new, power: 110 kW (149.56 HP), fuel type: diesel, next inspection (TÜV): 02/2028, color: white, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, sliding door, traction control, Seat covers in fabric design Double Grid, automatic transmission, air conditioning with manual control in the driver's cab, daytime running lights (always on when driving), touchscreen, driver's airbag, sun visors with ticket pocket on the driver's side and airbag label on the passenger sun visor, radio Composition Colour, MP3 interface, emergency call system eCall, electronic stabilization program ABS ASR EDS hill start assist brake assist, central locking with radio remote control and interior operation, power steering electromechanically controlled depending on speed, steering column height and length adjustable, ParkPilot in the rear area, cruise control system including speed limiter, immobilizer (electronic), start-stop system with brake energy recovery, headrests height adjustable front and rear, exterior mirrors electrically adjustable and heated, 4 steel wheels 6.5 J x 16 in 20 hole design, lumbar supports for left and right individual seats in the 1st row of seats (both manually adjustable), laminated glass windscreen with heat-insulating glazing, Tire Mobility Set: 12-volt compressor and tire sealant, non-smoking vehicle, headlight range adjustment, service history, sliding door on the right in the loading/passenger compartment, paintwork: candy white, prepared for We Connect and We Connect Plus, heated tailgate with window, Transporter lettering on the fender without lettering on the rear, height adjustment for left single seat in the driver's cab, swivel seat on the right in the 1st row of seats (not height-adjustable), armrests for both seats in the driver's cab, 1 12-volt socket in the dashboard, approval with up to 3 seats, crosswind assistant, battery/generator, heat-insulating glass (green), tires 205/65 R 16 C 1 T optimized for rolling resistance, hill start assist, fuel tank with 70 l tank volume, standard suspension and damping, type plate for commercial vehicle with EC type approval with Weight specification with COC papers, steering wheel, full wheel covers for 16-wheels, 16-chassis with 16-brake system, bumpers in grey, standard sound deadening measures, loading sill protection (inside) in plastic, unpainted door trim, normal roof (with attachment points for roof rack systems: 8 for the short wheelbase, 10 for the long wheelbase), seat on the left in the 1st row of seats, emissions standard Euro 6d ISC-FCM, tailgate closure without unlocking function from the inside, airbags for driver and front passenger with passenger airbag deactivation, glove compartment without lighting, rubber floor covering in the driver's cab, comfort headliner in the driver's cab, interior roof paneling made of hardboard in the passenger/loading area, side paneling (half-height) made of hardboard in the loading area, registration as a truck, transport protection measures without surface protection film, folding grab handles on the roof frame, hinges for rear doors/tailgate in standard design, lashing eyes for securing the load, outside mirror housings and door handles in black, H7 halogen double headlights, 4-stage adjustable windscreen wiper interval control, standard rear lights, interior lighting in the loading/passenger compartment, non-smoking version, mobile phone interface, prior sale and errors for this offer are expressly reserved. The vehicle description is only for general identification of the vehicle and does not constitute a guarantee in the sense of sales law. The only decisive factors are the agreements in the order confi Nsdpfxjvib Ene Aa Iolc

Year of construction: 2020, condition: new, The Sapphire is the optimal solution for the heavy industry, handling material thicknesses up to 200 mm. It enjoys great popularity in a variety of production facilities – often those operating in three shifts – as well as in all applications where stability, efficiency, and process reliability are particularly important. Nodjf Ak N Ropfx Aa Ijlc Thanks to its high-quality equipment, the system is a versatile tool for the highest demands and a helpful instrument for process optimization. Having been deployed in over 400 industrial facilities worldwide, the Sapphire cutting system proves its worth every day. Equipment - Harris oxy-fuel torch - Kjellberg plasma torch with e-touch - Kjellberg Q 3000 plasma power source with automatic gas console - Crosshair laser pointer for easier positioning - CamConcept Finest Cut V 7 - Extraction table 3000 x 6000 mm - Extraction system PFC 6 incl. extraction ducts - Delivery, assembly, and commissioning Key features • High dynamics and precision in automated 2D & 3D cutting of sheets, tubes, and profiles • Sheet metal processing up to a material thickness of 200 mm • Extensive cutting data library for ideal user-friendliness • Designed for the highest demands under the most challenging conditions in three-shift operation General technical data Drive: Servo AC Available working widths: 2,000-7,000 mm Available working lengths: from 1,500 mm Positioning speed: 25,000 mm/min Cutting thickness: up to 200 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy: DIN-EN 28206 Safety module: DIN-EN 13850 Repeatability: DIN-EN 28206 Height of work table: 740-760 mm Operating ambient temperature: +5 °C to 45 °C Operating humidity: max. 90%

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 470 mm, turning length: 3,000 mm, turning diameter: 720 mm, spindle bore: 104 mm, CNC Lathe Geminis 4 Plus 720 x 3000 mm Description Manufacturer: Geminis Model: CNC 4 Plus Control: CNC Fagor 8055 FL-BT Capacities: Distance between centers: 3,000 mm Swing over bed: 720 mm Swing over cross slide: 470 mm Spindle bore: 104 mm Tailstock diameter: 100 mm (Morse 6 taper) Bed width: 550 mm Speeds: 2 speed ranges: 0–1600 rpm Rapid traverse: X-axis: 8 m/min Z-axis: 8 m/min Motor: Power: 22 kW Weight: 8,000 kg Nlsdpfx Aewuligsa Isc Equipment: CNC Fagor 8055 FL-BT 3-jaw SHUNK Rota-S Plus chuck Ø 315 mm Additional 3-jaw chuck Fixed steady rest Chip conveyor General condition: Lathe in excellent condition

Condition: used, functionality: fully functional, Year of construction: 1990, Technical data: Max. sheet width 3,000 mm Max. Sheet thickness at max. yield strength 240 N/mm² when bending to max. sheet width 35 mm when rounding Bending length 2.2 x S Max. Passage between the rolls 145 mm Roll diameter top roll 552 mm Bottom roller 532.4 mm Side rollers 400 mm Number of rollers 4 Driven rollers 2 top and bottom rollers Hydraulic drive of the rollers Rollers arranged symmetrically Rotation speed of the rollers 2-4 m/min Adjustable rollers 3 Hydraulic adjustment of the rollers Adjustment speed of bottom roller 0-200 mm/min. Side rollers 0-700 mm/min. Pneumatic roller brake Actuation of the hinged bearing hydraulic Operating voltage 3 x 380 V / 50 Hz Display device for roller positions 4 x optical/analog Weight of the machine approx. 42 tons Area 2.71 x 6.4 m Height 3.12 m Additional equipment: - Conical bending shoe - Top support device Nledpfxou R D Dtj Aa Ioc - Interchangeable roller 440 mm The machine has been extensively overhauled and is in very good condition.

Condition: used, sheet thickness: 6motor: 10messurements (LxWxH): 3750 x 1600 x 2450sheet length: 3050weight approx.: 4800 Description: Hydraulic Shearing Machine ATLANTIC ATS 3000 Used Machine - Sheet width: 3050 mm - Sheet thickness: 6.0 mm - Sheet thickness for stainless steel: 4.0 mm - Cutting angle: 0.5 - 3.0° - Hold-downs: 18 pieces - Stroke rate: 9 / 14 strokes/min - Rear gauge - adjustable: max. 750 mm - Control: Conventional - Motor power: 10.0 kW - Weight: 4800 kg - Dimensions L-W-H: 3750 x 1600 x 2450 mm - Condition: Well-maintained Njdpfx Aaeu Uwyyo Iolc Features: - Electro-hydraulic / cam-guided sheet metal shear - Front control panel, left side - easy to operate - With electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the rear - Electro-motorized rear gauge 10-750 mm - With analog position indicator + handwheel for fine adjustment - 1x robust side stop - 1x movable footswitch - Front finger/entry guard - 2x emergency stop buttons at the front

Condition: new, Year of construction: 2025, Delivery ex works TR Cutting length: 3030 mm Sheet thickness (42kgf / mm): 8 mm Sheet thickness (70kgf / mm): 4 mm Cybelec Cybtouch 8 touchscreen CNC control All-steel welded construction Automatic cutting angle adjustment Automatic cutting gap adjustment Njdpfx Aajgu Nu Ej Iolc Working table with roller balls Hold-down-system Hardened and grounded upper and lower blades with 4 cutting edges Foldable front finger guard (CE compliant) Adjustable cutting stroke length 1 meter angle stop on the left with scaling 1 meter front sheet metal supports (2 pieces) CE light curtain on the rear of the machine (900 mm) Cutting line lighting Bosch Rexroth or Hoerbiger / HAWE hydraulic system Bosch Rexroth or ECKERLE hydraulic pump SIEMENS / Schneider / ABB / Omron Electronic Components Documentation in German or English CE conformity

Year of construction: 2026, condition: new, Specifications: - Performance: 3000 kg/h - Electric demands: 0,75 kW, 400 V, 16 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 750x2100x2800 mm - Output height: 1820 mm - Weight: 135 kg Nlsdpefd E Trsfx Aa Iec - Tub water capacity: 280 L/shift - Washing water supply: (20-100L/h depending on the setting) - Water connection: 3/4“ quick connector - IP65 certified electronics The fruits go to the input hopper, after soaking the elevator towards the fruit under the secondary clearwater sprays. Easy to clean, with massive polypropylene/acetal modular elevator, steplessly adjustable speed in both ways, with 2pcs rotating, 2pcs fix wheels. It requires minimal maintenance.

Condition: used, Technical data for the shelving system: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: 1,056 mm Number of bays per shelf row: 01 pcs. The scope of delivery includes: 02x shelf uprights, used Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. bulkhead stays and base plates The uprights are pre-assembled 2,278 mm high 400 mm deep 07x Shelf, used Designation: ZB 4423 V Material color: sendzimir galvanized Nlsdstthtxepfx Aa Isc Dimensions: 994 x 400 x 30 mm Weight per unit: approx. 4.65 kg Max. load per shelf 200 kg with evenly distributed load 04x Drawer, used Description: ESCH 341010-V-Z Material color: sendzimir galvanized Dimensions: 994 x 400 x 100 mm Front panel height: 100 mm Useful depth: 337 mm 8 dividers STE4010, transverse 16 dividers QTE 1810, lengthwise incl. 2 pull-outs incl. 2 drawer side panels Weight per unit: approx. 11.10 kg 02x Side panel, used Designation: SWI 3422 Material color: sendzimir galvanized Dimensions: 2,275 x 275 mm 01x Cross brace, second-hand Designation: KV31013 Material color: sendzimir galvanized Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.