Used Cnc Horizontal Machine Centers Morbidelli M100 2018 5 Axis for sale (101,440)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 17,250 h, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, controller model: Heidenhain Mill Plus, spindle speed (max.): 18,000 rpm, In 2015, a new spindle was installed! TECHNICAL DETAILS Travel range X-axis: 710 mm Travel range Y-axis: 520 mm Travel range Z-axis: 520 mm Maximum spindle speed: 18,000 RPM Number of tool magazine slots: 30 Tool holder: SK40 Distance between T-slots: 63 mm Rotational speed of the 4th axis max.: 40 RPM Rotational speed of the 5th axis max.: 40 RPM 4th axis swivel range: 360 x 0.001 degrees 5th axis swivel range: 0 ± 102 x 0.001 degrees Nodpfx Akoy Thlnouowg MACHINE DETAILS Control system model: Heidenhain - Mill Plus Operating hours: currently 36,500 hours Spindle hours: currently 17,250 hours EQUIPMENT Programmable coolant nozzles Coolant gun Chip conveyor 40 bar internal coolant system with 600 l paper filter system Measuring probe 3D Quickset Laser tool measurement Visiport Handwheel Signal light Operating mode 4

Condition: used, Year of construction: 2016, Mazak Variaxis i-500 5 Axis CNC Machining Centre. S/No. 276584 (2016) with Mazatrol Smooth X CNC Control, 500mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 500mm Diameter x 350mm x 300kg, 40 Tool ATC, CAT40 Spindle Taper, Mazak Spindle Chiller Unit, Absolent A Mist 10 Oil Mist Filter Extractor, Cromer Swarf Management and Filtration System, Renishaw RMI-Q Tooleye, Machine Weight 8000kg. Country of Origin: Japan Please Note: Erowa Machining Fixture Not Included Nwjdpfx Aksy Shk Ujueg Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2010, Technical details: x-travel: 800 mm y-travel: 685 mm z-travel: 630 mm c-axis: 360° (Planscheibe-Tisch) control: Siemens 840D Power Line spindle speed:: 10.500 - 20.000 U/min max. torque on the spindle: 180 Nm tool taper: HSK -A63 DIN 69893 tool changer with: 40 places no. of tables: 2 table swivelabel +/-: je 120 (a-Achse) ° table surface area: 280 x 275 mm table load capacity: 320 kg interface: RS232 spindle hours: 38.700 h Total power requirement: 37 kW dimension machine xH: 4,0 x 4,4 x 3,0 m dimensions LxWxH: Späneförderer: 2,1 x 1,05 x 1,5 m dimensions L x W x H: Kühlschmieranlage: 1,3 x 1.6 x 1,95 m 5 - axis machining center CNC machining center Clamping table for 4th and 5th axis (swivel 120° right/left/speed 50 rpm and turn with faceplate Ø 280mm/200 rpm) max. workpiece size 940 x 650mm for/on table with chip conveyor make Knoll, 750 K-1/150; year of manufacture 2009 Bürener coolant system with paper belt filter belt width 700mm; year of manufacture 2009 for both control cabinets with cooler Rittal Accessories exclusive i.D. Nwedpfxsytcf Uo Akueg *

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: chip conveyor, documentation/manual, 5-AXIS MACHINING CENTER DMG MORI HSC 70 LINEAR, YEAR OF MANUFACTURE 2015 EQUIPPED WITH HEIDENHAIN TNC 640 ELECTRONIC HANDWHEEL TRAVELS X 885 Y 600 Z 450 B +20º/-110º C n x 360º SPINDLE AT 18,000 RPM, 15 KW, HSK-A63 TABLE DIAMETER 600 MM 30-TOOL ATC (AUTOMATIC TOOL CHANGER) INTERNAL COOLANT AT 40 BARS LASER PROBE, BLUM PART MEASUREMENT PROBE, DMG TS649 Nwedpjy Tv R Eefx Akusg CHIP CONVEYOR

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, 5-axis universal machining center Quaser PRO.FLEX 6, manufactured in 2016, Heidenhain TNC 640 control system, HSK-A63 taper, 60-tool magazine, 15,000 rpm spindle, Blum TC60 probe. The machine is powered on and can be demonstrated. Machine Description For sale: 5-axis universal machining center Quaser PRO.FLEX 6. The machine is suitable for precise and complex 5-axis machining. It is equipped with a Heidenhain TNC 640 control system, a spindle with an HSK-A63 taper, a 60-tool magazine, and a 3D Blum TC60 probe. The machine is currently powered on and can be demonstrated in operation by arrangement. Technical Data Manufacturer: Quaser Model: PRO.FLEX 6 Year of manufacture: 2016 Control system: Heidenhain TNC 640 Spindle taper: HSK-A63 Max. spindle speed: 15,000 rpm Number of positions in the magazine: 60 Probe: Blum TC60 Number of axes: 5 Connection: 400 V / 50 Hz Power consumption: 71 kVA Machine weight: approx. 15,000 kg Machine dimensions: approx. 511 x 456 x 316 cm Serial number: 352A160001 Operating Hours System on: 24,959 h Machine on: 21,005 h Program run: 7,634 h Hydraulics: 20,995 h Axes: 5,936 h Spindle S1: 6,423 h Spindle S2: 0 h Accessories / Tool Holders Included in the offer is a 3D Blum TC60 probe and a calibration mandrel used during machine start-up with initial spindle lubrication. The tools in the collet chucks can remain with the machine for collection. ER16 collet chucks: short: 1 pc medium: 14 pcs long: 3 pcs Njdpoy Udrtsfx Akuswg ER32 collet chucks: short: 2 pcs medium: 2 pcs long: 2 pcs Shell mill body clamping parts: 3 pcs Separate clamping parts can be taken for the shell mills. The mills/bodies themselves will continue to be used on the machine for the tool room. Machine Condition The machine is used and in operational condition. It is powered on and can be demonstrated. Inspection by prior arrangement.

Condition: excellent (used), Year of construction: 2009, operating hours: 12,959 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 12,000 rpm, total height: 2,450 mm, total width: 2,400 mm, total length: 3,100 mm, table width: 630 mm, table length: 630 mm, table load: 350 kg, overall weight: 6,800 kg, Kunzmann WF 650 5-Axis Simultaneous Machining Center (2009) Manufacturer: Kunzmann Type: WF 650 5-Axis Simultaneous Machining Center Year of manufacture: 2007 Commissioned: 2009 Condition: Used, very good Machine ON: 46,181 h Spindle hours: 12,959 h Control: Heidenhain iTNC 530 Software Package 1 for iTNC 530 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Vertical milling head tilting range: -5° + 95° NC built-in rotary table Ø 630 mm Table load: 350 kg Nwjdjy S Ez Rspfx Akujg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer with 20 spindles Tools Internal coolant supply: Tool clamp with coolant supply and blow-out device through the spindle. Flow rate 25 l/min at 40 bar Optional water/air through the spindle Paper belt filter Controlled CNC milling head (B-axis) Mounting kit for TS 640 probe head 3D probe with infrared transmission Dimensions LxWxH approx.: 3.1 x 2.4 x 2.45 m Weight approx. 6,800 kg Coolant system LxWxH approx.: 1.6 x 2.00 x 0.50 m Scope of delivery: – Documentation – Machine feet – Machine light

Condition: good (used), Year of construction: 2017, Main spindle changed 2025. Technical details shown on photo. Parts shown by hand not come. Njdpfx Ajy S U Tcokuswg

Condition: used, DMG DMC 75 V linear is a 5-axis machining center engineered for precision, high accuracy and reliable operation. Working capacities: travels X 885 mm, Y 600 mm, Z 600 mm; table load max 600 kg; B axis +10/-110°; C axis 360°; table speed 100 t/min; tool magazine 60 places, tool Ø max 40 mm, length 300 mm; spindle interface HSK-A63. Key specs: spindle 0–28,000 rpm (stepless), spindle power 55/43.5 kW; rapid traverse 90 m/min; air 6 bar; power 3x400 V 50 Hz; machine weight ≈11,000 kg; dims L3255×W2450×H3150 mm. Accessories: high-pressure coolant 60 bar, chip conveyor, electronic handwheel. Achieves tight tolerances; typical in automotive, aerospace, medical, watchmaking and machine tool industries Nodpfxoy S Dfne Akujwg

Condition: used, Year of construction: 2016, machine/vehicle number: 1265000063, total height: 3,500 mm, total length: 7,000 mm, total width: 6,000 mm, overall weight: 41,000 kg, DMG MORI DMU 160 P Universal Machining Center in heavy-duty portal / duoBLOCK design for 5-axis positioning and simultaneous machining. Equipped with Heidenhain TNC640 control and designed for high-precision heavy-duty machining in tool, mold, and mechanical engineering.Large working area with integrated NC rotary table and controlled B-axis milling head for complex 5-axis machining. The machine concept is designed for maximum rigidity, thermal stability, and high long-term accuracy.The machine features SK50 spindle technology, a wheel magazine with 63 tool positions, and a double gripper system. Through-spindle coolant supply and extensive measurement and process optimization systems are available.Equipment includes, among others:Oil and emulsion mist separator with mechanical filterBlow air through the spindle centerBlum Laser NT Hybrid tool measurementM&H infrared measuring probe3D quickSET package for kinematic calibrationMPC Machine Protection ControlACC Active Chatter ControlApplication Tuning Cycle (ATC)Virtual axis for Heidenhain TNC640Heidenhain HR520 electronic handwheel with display4-color signal lampSafety package in case of power failureSafety laminated glass paneMachine version as pit version with adapted chip conveyor height and operator staircaseThe virtual axis enables movement towards an inclined tool via the electronic handwheel.The machine is designed for demanding 4-/5-axis machining with high process reliability, optimized surface quality, and reduced machining times.Technical highlights:63-position wheel magazine with SK50 tool holderThrough-spindle coolant supplyIntegrated measurement and calibration systemsHeavy-duty portal design with high thermal stabilityOptimized for high-precision continuous machiningExtensive factory options and process-optimized equipmentMachine from ongoing industrial production with high-quality OEM equipment and documented factory configuration.Operating hours: approx. 19,680 h (program run: 24,564 h). Nwsdpfoy S Nhuox Akuog 5-axis machining: Yes Travel Z-axis: 1100 - mm Weight approx.: 41,000 kg Serial number: 1265000063 Travel X-axis: 1600 - mm NC rotary table: Yes Dimensions (LxWxH) approx.: 7000 x 6000 x 3500 mm Control: Heidenhain TNC 640 Travel Y-axis: 1600 - mm Year of construction: 2,016 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: like new (used), Year of construction: 2022, operating hours: 12,719 h, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 850 mm, nominal power (apparent): 21 kVA, controller manufacturer: Heidenhain TNC 640 mit CELOS, workpiece weight (max.): 2,000 kg, total height: 3,200 mm, total length: 4,500 mm, total width: 7,100 mm, table width: 850 mm, table length: 2,350 mm, rotational speed (min.): 15,000 rpm, spindle speed (min.): 15,000 rpm, Year of construction: 2022 CNC controller: Heidenhain TNC 640 mit CELOS Axes X-axis travel mm: 2000 Y-axis travel mm: 800 Z-axis travel mm: 850 C-axis degrees: 360º (0,001) B-axis degrees: ±120 Rapid traverse m/min: 50 Acceleration in the axes m/s2: 5 Worktable Table dimensions mm: 2350x850 Max. workpiece weight kg: 2000 Milling/turning table nc: Table dimensions mm: Ø800 Max. workpiece weight kg: 800 Table rotation speed rpm: 50 Spindle Spindle speed rpm: 15000 Spindle drive power kW: 21/16 (40%ED/cont) Spindle torque Nm: 111/85 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: SK 40 Tool magazine slots: 40 Tool changer: Double gripper With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 400 Max tool weight kg: 8 Chip-to-chip time s: from 7,5 Equipment Chip conveyor Rigid table with integrated rotary table Infrared probe Internal cooling lubricant supply Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Mist collector NC swivel rotary table Preparation for the use of the 3D quickSET MPC – Machine Protection Control Automatic door Automation interface Machine running times Under power: 18669 Spindle Working: 12719 Basic machine dimensions / weight Length mm: 4500 Nodpoy Shgvjfx Akujwg Width mm: 7100 Height mm: 3200

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Control: Siemens SL Tool positions: 160 Tool holder: HSK 63 Spindle speed: 10,000 min⁻¹ / 242N Pallet size: 630×500 mm Nwedpoy S Apfefx Akuog Number of pallets: 2 X-axis: 800 mm Y-axis: 800 mm Z-axis: 1000 mm Max. table load: 1000 kg

Condition: used, machine/vehicle number: 008501, Position 1: 5 Axis CNC Routers BIESSE-ROVER A - SYNCHRO Nwodpfey Af Husx Akuog Position 2: Panel Feeding and Loading BIESSE-ROVER A - SYNCHRO

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, total length: 8,000 mm, total width: 3,325 mm, table width: 500 mm, table length: 600 mm, table load: 500 kg, overall weight: 12,000 kg, spindle motor power: 11,000 W, 5-axis CNC machine (VMC) MAZAK - VARIAXIS J600-5X MACH-ID 9484 Make: MAZAK Type: VARIAXIS J600-5X Nwjdpfjyyybhex Akuog Control: MAZATROL matrix 2 Year: 2015 5 Axis Manufacturing cell with automation LANG 20 positions Renishaw 3D Taster with pre-setter ball LANG Preperation system with  vacuum 25 Units LANG pallet with vice / clamp / chucks Only 7155 Working hours ! New EUR 500.000 X - Travel: 850mm Y - Travel: 550mm Z - Travel: 510mm A - Axis: -120 to +30° B - Axis: - 120 to +30° Table Length: 600mm Table Width: 500mm Table load: 500 Table Ø: 600mm Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Feed rate B-Axis: 30Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 11kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8000mm Width: 3325mm Height: 3060mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2013, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, table width: 1,200 mm, table length: 4,500 mm, rotary table diameter: 1,250 mm, NC Rotary table 1250 mm with 50 Rpm Full C-Axis  360.000 with HIGH TORQ Drive HSK-100 with 90 kW and 15.000 Rpm 5 Axis simulteneous package Last service in 2023  X - Travel: 4000mm Y - Travel: 1200mm Nedpfx Aex Sqf Iskujwg Z - Travel: 1300mm A - Axis: 105° B - Axis: 360000° Table Length: 4500mm Table Width: 1200mm Table Ø: 1250mm Spindle Taper: 100ISO/Bt/Mk Power on spindle: 90kW Speeds / ranges: 15000Rpm ATC / revolver: 60 Coolant through spindle / Bar:70 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 10500mm Width: 4500mm Height: 4100mm Weight: 34000kg

Condition: used, Year of construction: 2017, operating hours: 1,717 h, total height: 2,700 mm, total length: 40,000 mm, total width: 2,400 mm, Colour: Grey Price: On request The blade unit has a flange connection so fixed blade ( max 1000mm diam ) with 55kw at 4000rpm 5axis unit 12kw is a milling group with toolchanger C1: 540° B1: 250° C2: 540° B2: 90° Installed dimensions: 19300x7100xH4400mm - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 904B0018 - Operating hours: 1717 - Number of milling spindles [pcs.]: Nodpfx Aewf Hw Hskuowg - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 2 - - Main motor power [kW]: 55 - Saw unit present: Yes - Table length [mm]: 14400 - Table width [mm]: 3500 - X-axis maximum stroke [mm]: 5000 - Y-axis maximum stroke [mm]: 15870 - Z-axis maximum stroke [mm]: 1000 - Voltage [V]: 400 - Current consumption [A]: 130 - Power [kW]: 65.0 - Transport dimensions: 40000mm x 2400mm x 2700mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: as good as new (ex-display), Year of construction: 2020, machine/vehicle number: VT0341, functionality: fully functional, High-performance machining center SPINNER VC850-5A Travel distances X850, Y510, Z510 mm High-performance milling spindle up to 18,000 rpm Power Pmax 20 kW / Nmax 66 Nm as a built-in hybrid spindle with direct drive, without belt Tool holder on the spindle HSK63 TOOL MAGAZINE with 32 tool stations DIRECT MEASURING SYSTEMS in the X/Y/Z axes In the latest generation of SIEMENS "SINUMERIK ONE" control system - SPINNER - SPIOS 24" touch operating panel for I4.0 applications - Operating panel height-adjustable, rotatable and tiltable for best ergonomics - incl. engraving cycles - 24" liquid crystal flat color screen with multi-touch functionality - User memory 2 GByte - 15 zero-point shifts - 1 free USB interface - Ethernet interface standard SPINNER MULTI-CONTROL WHEEL on the operating panel, integrating the following functions into a single control element: - Handwheel function in jog mode - Feed override in automatic mode - Start button and feed influence in single-block setup mode, automatically resetting to 0% at the end of the sequence -> all important functions of the setup mode integrated into one control element Electrical preparation for HOWIMAT 2-axis rotary tilting table on VC850/VC1150 2-axis ROTARY TILTING TABLE mounted on the right in the working area particularly rigid and space-saving, suitable for holding chucks or collets TILTING AXIS: - Dividing accuracy +- 0.005 degrees - Swivel range 105 degrees - Maximum tangential moment 1,200 Nm ROTARY AXIS with direct drive via coaxial motor: Nedey S Ttzspfx Akuowg - Dividing accuracy +- 0.005 degrees - Bore 80mm, spindle nose D=160 mm - Maximum tangential moment 500 Nm UNIVERSAL CHIP CONVEYOR VC850 PREPARATION of the spindle FOR HIGH PRESSURE for using the additional tank up to 70/80 bar HIGH-PRESSURE TANK 70bar with paper band filter for flushing centrally through the spindle Additional compressed air supply at the spindle head Compressed air centrally through the milling spindle Flushing gun in the working area PREPARATION FOR SPINNER STANDARD PROBING SYSTEM Wireless SPINDLE PROBE ADDITIONAL HOOD on top for a closed working area STANDARD DOCUMENTATION in German consisting of machine manual and CNC manuals is delivered in digital form on the control system. Paper manuals available at an additional cost. RING EYES for crane unloading, set consisting of 4 pieces absolutely necessary for crane transport STANDARD PAINTING two-color in light gray RAL7035 and blue-gray RAL5008 Electrical design EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN network (5-conductor) Notes: The price includes warranty services only within Germany. In the case of new and demonstration machines, the images are not necessarily of the individual machine, but of comparable machines. Accessories shown, such as clamping devices or tool holders, are included in the scope of supply only to the extent listed in the technical description. Please request a detailed offer ex works. Visit our factory near Munich or one of our showrooms. We may have other offers for comparable machines. Subject to prior sale.

Condition: used, machine/vehicle number: 008272, Position 1: 5 Axis CNC Routers BIESSE + KUKA-ROVER A + KR210 R3100 Nwodpfxjx A Tfvs Akujg Position 2: Robot BIESSE + KUKA-ROVER A + KR210 R3100

Condition: used, Year of construction: 2021, travel distance X-axis: 1,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 740 mm, controller manufacturer: Fanuc, controller model: Series 0i-MF Plus, workpiece diameter (max.): 800 mm, total height: 3,435 mm, total length: 5,575 mm, total width: 4,621 mm, overall weight: 18,000 kg, Equipment: documentation/manual, CNC 5-axis Vertical machining Centre CNC Control Fanuc Series 0i - MF Plus Table size Ø 800 mm Number of pallets 1 Maximum workpiece dia x height Ø 1200 x 300 mm Nedpfx Aeygw E Njkuswg Movement X-Y-Z-axis 1600 x 700 x 400/740 mm C-Axis (table rotation) 360° B-Axis travel -11 /+30 ° Spindle speed 15.000 r/min Spindle Taper Big Plus BT40 Spindle motor 18,5/15 kW Magazin Capacity 60 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller manufacturer: HEIDENHAIN, controller model: I TNC 530, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,000 h, spindle nose: BT 40, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis continuous mobile gantry vertical machining center, with rotary table (capable of both horizontal and vertical mounting) with a diameter of 550mm. Possibility of pendulum machining (pallet changer type) with dedicated partition. Equipped with BLUM laser control NT tool presetting. Wireless part probe HEIDENHAIN TS 642. Belt-type chip conveyor. High-pressure through-spindle cooling with paper filter. Spindle chiller. Remote HEIDENHAIN handwheel. Nsdjy Diabjpfx Akuewg

Condition: excellent (used), Year of construction: 2004, operating hours: 7,987 h, functionality: fully functional, travel distance X-axis: 1,120 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: FANUC, controller model: 160 is-MB, table width: 500 mm, table length: 500 mm, table load: 400 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 7,979 h, spindle motor power: 22,000 W, spindle nose: SK 40, number of slots in tool magazine: 30, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Japanese-built high-speed machining center with full 5-axis simultaneous capability, in excellent condition with 29,000 power-on hours and only 7,900 spindle hours (as the spindle was overhauled by the manufacturer a few years ago), complete with: remote electronic handwheel; high-pressure through-spindle coolant; chip conveyor; random tool changer; laser tool inspection system; RENISHAW MP 10 wireless part probe; FANUC high-speed package; network interface; serial interface; memory card. Nsdpfxjx H Tx Ho Akuewg

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: 460, rotational speed (max.): 15,000 rpm, spindle nose: HSK 63A, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Used HERMLE C800U high-speed 5-axis continuous vertical machining center; this is a medium-sized CNC machine equipped with a gantry granite structure, weighing 8,200 kg. Axis travels: X 800 mm, Y 500 mm, Z 600 mm, with a 5-axis table featuring a 280 mm diameter platter. Year of manufacture: 2000, fitted with HEIDENHAIN TNC 430, HSK 63A spindle at 15,000 rpm (max 19 kW) cooled by a dedicated chiller, 30-position pick-up type tool changer, and remote electronic handwheel. The equipment is completed by a KNOLL chip conveyor, high-pressure through-spindle coolant, and a RENISHAW MP10 wireless 3D workpiece probe. Njdpfx Akexryfzeuswg

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,520 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, controller manufacturer: SIEMENS, controller model: 840D, rotational speed (max.): 12,000 rpm, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, spindle nose: ISO 40, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Year: 2018, CE compliant CNC: SIEMENS 840D with SHOP MILL 4+1 axes ONLY 18,300 power-on hours Worktable dimensions: 2-piece table - fixed 920x540 mm / rotary-tilting 650x500 mm (with extension ring) Longitudinal X-axis travel: 1520 mm Transversal Y-axis travel: 520 mm Vertical Z-axis travel: 420 mm Spindle taper type: ISO 40 Spindle speed: 12,000 rpm Automatic tool changer: 32 positions Spindle motor power: 15 kW Approximate net weight: 10,000 kg Accessories: Internal coolant Nsdpfey Azcljx Akujwg Chip conveyor Full upper enclosure Pneumatic door opening BLUM tool presetting and workpiece probe capability

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 464-61, controller manufacturer: Siemens, controller model: Sinumerik, workpiece length (max.): 300 mm, workpiece diameter (max.): 200 mm, total height: 2,400 mm, total length: 3,200 mm, total width: 2,000 mm, overall weight: 22,000 kg, spindle nose: HSK-A32, number of slots in tool magazine: 12, mount diameter: 32 mm, tool length: 160 mm, tool diameter: 63 mm, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained machine from training workshop and demonstration. Fully functional and immediately ready for use. Equipped with NC indexing device, manufacturer: PEISELER, type: AWUP 100. Includes comprehensive machine documentation as well as 2 spare filters. Nwjdoy Sghlopfx Akuog

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: 182.012, controller model: Siemens Sinumerik 840D, total height: 2,900 mm, total length: 6,000 mm, total width: 2,700 mm, overall weight: 8,000 kg, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, This is an untested machine. Due to the partially dismantled enclosure, the machine is offered exclusively as a source of spare parts. Configuration Siemens CNC control Automatic tool changer Chip conveyor Coolant lubrication system Nedpfx Aoy Sgb Eokuowg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1820031, controller model: Siemens Sinumerik 840D, total height: 2,900 mm, total length: 6,000 mm, total width: 2,700 mm, overall weight: 8,000 kg, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, This is a very well-maintained machine, originally from a training workshop. The machine is fully functional and ready for operation. Configuration: - Siemens CNC control - Automatic tool changer Nodpfxey Sgaze Akuswg - Double station / multi-sided machining - Chip conveyor - Coolant and lubrication system - Fully enclosed