Used Empty Bottle Inspector for sale (5,807)

Condition: used, Year of construction: 2007, Overview This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Technical data - Manufacturer: KHS - Model: Innoclean - Machine type: single-end bottle washer (soaker) - Year of manufacture: 2007 - Drive and control modernisation by KHS: 2022 - Output range: 2,800 - 14,500 bottles/h - Design output: 13,200 bottles/h, 0.75 l glass bottle, 0.68 kg - Bottles across machine width: 19 - Carrier baskets: 225, of which 217 loaded - Cell pitch: 105 mm; carrier chain pitch 169 mm - Bottle diameter: 54.0 - 89.5 mm (plastic cells) - Bottle height: 180 - 340 mm - Bath volumes: main caustic soak 23.0 m³, pre-soaks 0.9 and 1.1 m³, after-caustic 0.3 m³, spray zones 0.4 m³ each - Power supply: 400 V, 50 Hz, TN-S, 113 A nominal, 125 A slow fuse; control voltage 24 V DC - Water consumption: 3.56 m³/h, 270 ml per bottle - Compressed air: 1.0 Nm³/h at 3 bar - Overall dimensions: 11,040 x 4,470 x H 3,438 mm (incl. infeed table) - Conveyor heights: infeed 720 mm, discharge 1,690 mm Hfsdpfx Aqozzz Ivegon - Weight approx.: 33.5 t machine, 62.6 t operating - Largest transport segment: 4,410 x 4,100 x 3,370 mm, approx. 7.3 t - Enclosure type 12; CE marked Equipment - Triple-i-Drive: worm gearboxes with individual geared motors, each on its own servo inverter with synchronisation and individual overload protection - Servo-driven infeed and discharge segments with brake motors - Capacitive multi-touch operator panel, graphical interface with component views, RFID card reader - Gearbox monitoring with torque protection - Two pre-warming and main caustic immersion baths, with under- and over-caustic label flushing and bottle base spray-off - Automatic label discharge over a full-width sieve belt with brush take-off - Automatic level control and caustic dosing; sieve tub filtration and after-caustic circuit for long caustic service life - Three water spray zones, internal and external, with rotating fresh-water spray - Vapour extraction and plate heat exchanger - Siemens SIMOTION D and SINAMICS drive cabinet - Original KHS documentation: operating manual, 2022 supplement, spare parts list Condition Used, technically complete. Still installed and under power at its production site; photographs and video show it running. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Year of construction: 2013, Overview This KOSME JETCLEAN G 16/960 1T UP is a rotary air rinser built in 2013. It cleans empty bottles and containers automatically before filling: the containers are turned upside down and blown out with filtered air through moving air nozzles, so loose particles and contamination are removed before the containers reach the filler. It suits bottlers who want a dry cleaning step for empty PET bottles ahead of filling. The containers are held in grippers on the rotating carousel and inverted for the air treatment. The machine is fully enclosed by transparent safety doors and is operated from a KOSME touch panel with production data and recipe management. It covers container formats from 400 g/ml to 2 kg at an output of up to 6,000 containers per hour; the format currently set up is a 2 L PET bottle, other formats via the available change parts. Technical data - Manufacturer: KOSME - Model: JETCLEAN G 16/960 1T UP - Year of manufacture: 2013 - Machine type: rotary rinser for empty containers, air blowing - Treatment medium: filtered air - Format range: 400 g/ml to 2 kg containers - Output: up to 6,000 containers per hour Hodpfxoz Et Utj Aqgjfn - Current format: 2 L PET bottle - Dimensions: approx. 2.5 x 2.5 m Equipment - Rotary carousel with container grippers and inverting section - Moving air nozzles for blowing out the containers - Transparent safety doors - KOSME touch panel with production screen and recipe management - Electrical documentation and wiring diagram Condition Used. The machine is still installed at the operator's site in Germany and can be inspected by arrangement. Availability Available after decommissioning in week 43 of 2026 (late October 2026). Location: Germany.

Condition: used, The device was used in a juice bottling line. The machine is in good working order and ready for operation. Hsdpoz Szz Nofx Aqgsfn Application: It is used for automatically packing various types of containers (glass and plastic bottles, jars, cans, doypack packaging) into collective cartons, boxes, or trays. This machine is very commonly used in the food, bottling (wine, brewery), and chemical industries, as well as in oil production. Capacity: up to 3000 bottles per hour (BPH) Model: Meta

Condition: used, The machine operated in a juice bottling line. Hedpfx Aez Szf Isqgjfn The machine is in good working order and ready for operation. Application: It is used for the automatic packaging of various types of containers (glass and plastic bottles, jars, cans, doypack packaging) into collective cartons, boxes, or trays. This machine is very commonly used in the food industry, bottling industry (wine, beer), chemical industry, and in the production of oils. Capacity: up to 7000 bottles per hour (BPH) Model: Meta 2 Weight: 2600 kg Year of manufacture: 2003 Power: 4.12 KW/A Please check my other listings.

Condition: ready for operation (used), Year of construction: 2011, - 10-head rotary bottle filling machine - suitable for liquids such as wine, juices, sauces, beverages, oil, etc. Hsdpfsz Ry Dasx Aqgsfn - for bottles and/or jars

Condition: used, Year of construction: 2015, Machine: Barida ICE 2500 Bottle neck freezer Hfodpfsz Surnjx Aqgen

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, total height: 1,900 mm, total width: 2,400 mm, total length: 6,000 mm, type of input current: AC, overall weight: 500 kg, input voltage: 220 V, machine base height: 900 mm, operating pressure: 9 bar, year of last overhaul: 2027, control voltage: 220 V, input current: 16 A, input frequency: 50 Hz, inner diameter: 610 mm, space requirement length: 6,000 mm, space requirement height: 2,000 mm, space requirement width: 3,000 mm, We offer this ready for use The Raw Juice Company TOP-21 Bottle Filling Machine 100ml - 3000ml, year of construction 2022. Hodpfxoz D Uuxe Aqgefn Manufacturer: The Raw Juice Company Model: TOP-21 Year of construction: 2022 year Condition: ready for use / Currently in use Category ID: 310 Type ID: 1066 Machine type: Bottle Filling Machine 60ml - 3000ml This versatile filling machine is currently being used for filling bottle sizes from 60ml - 2000ml. It is a fully automatic line, run by 1 person. Put the bottles on the line, it will fill them (4 bottles at a time) with a 4 headed diving nozzle (to avoid foaming), then moving the bottles along to a cap placer and finally a to a cap tightener. The cap tightener is set up for a 38mm cap (this can be changed). This line has been regularly maintained by our in house service team and is in perfect working order. Capable of filling from 500 - 2000 bottles P/Hour If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2006, condition: used, Complete Automatic PET Edible Oil Bottling and Packaging Line – 8,000 Bottles/Hour Complete fully automatic production and packaging line for filling edible oil into 1.0 L PET bottles, with a production capacity of approximately 8,000 bottles per hour. Our asking price is EUR 520,000 net, ex works Shtip, North Macedonia. The price is negotiable, and we are open to considering reasonable offers. The line covers the complete production and packaging process, from PET preforms to finished automatically palletized products. The complete line includes: SIAPI EAS 50.100/8 – PET stretch blow moulding machine, 8 cavities Bottle air conveyor and conveying system AVE Industries RVM 30/8 – filling and capping monoblock, 30 filling stations and 8 capping stations Nitrogen injection system Bottle conveyor system AVE Industries 8T H/M E1 – automatic labelling machine AVE Industries CP3-20 – automatic shrink wrapping / packaging machine with heat tunnel Conveyor systems AVE Industries PABR-80 – automatic palletizing system Main specifications: Application: Edible oil Bottle material: PET Bottle size: 1.0 L Line production capacity: approx. 8,000 bottles/hour Main equipment year of manufacture: 2006 Fully automatic production and packaging line The equipment is offered as a complete integrated production line for PET bottle blowing, edible oil filling, capping, labelling, shrink wrapping and automatic palletizing. The complete line is currently installed, in operation and fully functional. Interested buyers can inspect the line and see it running under actual production conditions by prior arrangement. The line is located in Shtip, North Macedonia. Hodpfxjzmd Uis Aqgofn Additional technical documentation, photographs and videos of the equipment are available upon request. The complete line is offered for sale as one unit.

Year of construction: 2023, condition: excellent (used), Professional pneumatic device for emptying SEMCO 600 ml cartridges and containers, designed for industrial applications (adhesives, sealants, pastes, high-viscosity materials). Manufacturer data: • Manufacturer: axiss GmbH (Germany) • Type: 9110 / B-SEMCO600-PN-KM-F • Year of production: 2023 • Serial number: 514 • Quality standard: DIN EN ISO 9001:2015 • CE marking Technical description: • Pneumatic emptying of SEMCO 600 ml cartridges Hfodpfx Aqoz Slmwegsn • Robust construction on an aluminium profile mounting plate • Piston assembly with transparent sleeve (position control) • Pressure regulator with pressure gauge • Directional control valve • Pneumatic quick couplings • Shut-off valve (safety) • Vertical or horizontal mounting possible • Smooth and controlled operation

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling * Separate bottle pressurising and return-gas system * Automatic filler bowl level and pressure control * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Current: 12 A Container: Glass bottles Product: Beer Closure: Crown caps Filling principle: Counter-pressure / isobaric Rinser: 9 stations Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. Hsdjz Dhrqjpfx Aqgofn IMPORTANT The labelling machine has been sold separately and is NOT included. An electric motor is required to operate the bottling line and is NOT included. Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.

Condition: used, Year of construction: 1993, Machine: Champagel – Bottle neck freezing Champagel Hfsdjz Sur Uepfx Aqgsn

Condition: used, Year of construction: 2000, A machine for packaging containers such as bottles (beer, wine, beverages, oils) or cans into cardboard collective packaging. The containers are grouped and then wrapped with a cardboard blank and glued together to form a collective package. Manufacturer: SOTEMAPACK Model: WRAP-AROUND Year of manufacture: 2000 Capacity: up to 720 packages/hour (12 packages/minute) Control system: S7-300 Original technical documentation included. Technical condition: used machine, in working order at the time of disconnection, condition as shown in the pictures. Hfodpoywclwofx Aqgjn

Year of construction: 1995, condition: good (used), functionality: fully functional, For sale is a bottle erecting machine made by Engler including a stainless steel bottle bunker. There are also various format parts and a blower. The machine is currently not in use and can be viewed by arrangement at the production site in Thuringia. Formats: 300ml, 400ml, 500ml, 875ml for PE or PET bottles. Hfsdpotmqafefx Aqgen Diameter: 2.10m; Outlet height: approx. 0.98m; Bunker height: 1.12m to 1.75m

Condition: excellent (used), Year of construction: 2003, PET bottle blowing machine Manufacturer: KRONES Model: CONTIFORM K781 Efficiency: 12,000 bph Includes 1.5 L and 0.5 L bottle molds Power: 150 kW Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Set dimensions (blow mold + preform feeder): 1100 x 340 cm, h: 450 cm Hfedpfx Asvddkvsqgen Blow mold dimensions: 500 x 340 cm, h: 250 cm Feeder dimensions: 600 x 250 cm, h: 450 cm Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Year of production: 2003 Technical documentation of machine operation Very good condition

Condition: excellent (used), Year of construction: 2025, Hot fill bottling line - previously used on 500ml microwaveable bottles of soup. Consists of stainless steel bottle unscrambler with hopper and inclined conveyor, 90 degree infeed conveyor, 16 head in-line filler, 3 head inline capper, stainless steel cap unscrambler with hopper and elevated conveyor. Installed new late 2025 and only available label due to the Bankruptcy of contract packer. Hedpfsztqfnsx Aqgsfn

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-Glass Bottle Crusher is ideal for crushing empty glass bottles and glasses in catering business and other bottling companies. It is also used in factories with glass waste issues. You can crush up to 100 glass beer bottles per minute. The glass bottle crusher impresses with its ease of use, safe operation and the spacious filling chamber. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 80%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Machine size: 1850 H x 965 W x 832 D mm Machine weight: 315 kg Transport height: 1850 mm Volume reduction: up to 80 % Loading aperture: 481 W x 337 H mm Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) User-friendly, safe and easy to operate Reduces the frequency of daily/weekly glass waste collections Suitable for up to 240 Ltr. wheelie bins Small footprint Volume reduction of up to 80% from bottles to cullet A quality product “Made in Europe” Suitable for crushing Hjdpfx Aeykbijqgjfn Glass bottles Glasses Other small glass containers Optional extras Machine colour RAL Machine galvanised

Condition: used, Year of construction: 2005, For wine and sparkling wine bottles Hodpjz R Dh Aefx Aqgsfn Type: WD/ 12 capacity / hour ca.: 6000

Condition: used, Year of construction: 2021, AVE UNIBLOCK 16/16/4 Bottle fillers." However, I can suggest common features found in similar bottle filling machines, which may include: Hfedoz Hrnhspfx Aqgen - Filling Type: Gravity, Pump, or Gravity/Pump combination. - Production Rate: Typically measured in bottles per hour or minute. - Number of Filling Heads: In this case, it could refer to a 16-head system, meaning it can fill 16 bottles simultaneously. - Bottle Size Range: Specifications may include the range of bottle sizes the machine can handle. - Control System: May involve PLC (Programmable Logic Controller) for operations. - Material Construction: Stainless steel or food-grade materials suitable for hygienic applications. - Dimensions and Weight: Overall dimensions and weight for installation considerations. - Power Requirements: Voltage and power consumption details. Bottle Sizes: 250 ml, 500 ml, 1 Litre , 2 Litre Cap Size: 38 mm Capacity: 6000 bottles per hour on 1 L Stations: Rinser , Filler and Caper Condition: Excellent

Condition: used, Year of construction: 2017, Overview Complete dressing line for sparkling wine in 750 ml glass bottles, rated at 5,000 bottles/h. The line runs from bottle washing and drying through capsuling and labelling to tray forming, wrap-around packing and vertical packing, linked by approximately 50 m of bottle conveyors, tray conveyors and two accumulation tables. The labelling machine dates from 2017, the packaging end from 2002 and the bottle washer-dryer from 2005. The line is still in production and can be visited on request. Technical data - Year of manufacture: 2017 (labelling machine); remaining machines 2002 to 2005 - Output: 5,000 bottles/h - Product: sparkling wine - Bottles: glass, 750 ml - Bottle conveyors: approx. 50 m total length - Accumulation tables: 2 - Electrical cabinet with power supply and automation included Scope of Delivery Hfsdpfx Ajz Dtymsqgon - Bottle washer and dryer | CAMES | WDT-12 | 2005 - Capsuling machine | Robino & Galandrino | ZENITH Z 2/16 OTTICO | 2004 - Labelling machine | Sacmi | KUBE K60 | 2017 - Tray former | CERMEX | F28.40 | 2002 - Tray former | CERMEX | F28.40 | 2002 - Bottle deviator | CERMEX | 2002 - Vertical packer | CERMEX | AN90 | 2002 - Wrap-around packer | CERMEX | WB45.00 | 2002 - Laser coder | LINX | SL301 - Hot-melt unit | Nordson - Bottle conveyors | Bobard, Thierion, Anduze | approx. 50 m total length | 2017 - Tray conveyors - 2 accumulation tables - Electrical cabinet with power supply and automation Condition In production. Inspection on site by appointment. Availability Available from 29 January 2027. Location: France.

Year of construction: 2020, operating hours: 2 h, condition: reconditioned (used), functionality: unexamined, For sale is a complete PET bottle recycling washing plant for processing used PET bottles into clean PET flakes. The plant is designed for a production capacity of approximately 1,000 kg/h and is suitable for recycling companies, plastics processors, and companies that want to industrially sort, shred, wash, and dry PET bottles. According to the documentation, the water-contacting components are made of SUS304 / stainless steel 304. Technical Specifications Feature Specification Plant type PET bottle recycling and washing plant Capacity approx. 1,000 kg/h Raw material used PET bottles End product cleaned PET flakes Residual moisture ≤ 1% Flake size approx. 14 mm, adjustable Proportion 8–12 mm ≥ 90% Fine granulate ≤ 3% Powder content ≤ 5% Hodpfx Aqszhifijgjfn Installed power 238 kW Power consumption approx. 153 kW/h Water requirement approx. 6–8 t/h, recyclable Working area approx. 59 × 4 × 6 m / approx. 208 m² Personnel requirement approx. 9 people Plant scope The line consists of the central machines for the complete recycling process: Conveyor belts Bale opener / De-Baler Label remover Manual sorting station Metal detector Plastic mill / Crusher Screw conveyor Float-sink washing systems High-speed dewatering machines Hot steam washer High-speed friction washer Zig-Zag label blower for label and dust separation Storage or product silo Electrical control cabinet Description This PET washing plant is designed for the industrial recycling process of post-consumer PET bottles. The process begins with the feeding of the compressed bottle bales, followed by bale opening, label removal, manual sorting, and metal detection. Subsequently, the bottles are shredded and cleaned in several washing, friction, and dewatering stages. The plant features a hot steam washer that operates with water at approximately 90–95 °C and, together with cleaning agents, removes oil, dirt, adhesives, and label residues. The flake stream is further cleaned via float-sink washers to separate caps, label residues, and other foreign substances. The final drying takes place via high-speed dewatering units. The result is clean PET flakes with a residual moisture content of a maximum of 1%, suitable for further processing, e.g., granulation, extrusion, or recycling into plastic products.

Condition: used, WEINIG UNIVAR 10 automatic rebating machine from a UC-Matic window production line, not in working order. Technical data: Hfsdpeztv A Ssfx Aqgsn - Year of manufacture: 1997

Condition: used, For profiling and edge-milling windows doors Hfedpsztv Afefx Aqgon individual components and similar items with all-round profiles, including return feed Units: Technical data: - 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, - 3. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic,

Condition: ready for operation (used), Year of construction: 2012, Professional automatic machine for rinsing glass and plastic bottles using filtered water. Manufacturer: WAB s.r.l. (Italy) Model: ADV R00 R1 8-40-110-110 Number of grippers: 40 pcs Output: approx. 8,000 bph Stroke: 110 mm Control: Siemens PLC Hfodeyxxayopfx Aqgsn Year of manufacture: 2012 Technical condition: Used machine, regularly serviced, fully operational at the time production was stopped.

Condition: used, Year of construction: 2006, Overview This Kematec T20-3 KMT, built in 2006, dries filled bottles with air knives on their way through an enclosed tunnel before labelling. The bottles run on a 120 mm plastic chain conveyor under inclined air nozzles on both sides. The machine is still installed in a wine bottling line and can be inspected on site. Technical data - Manufacturer: Kematec - Model: T20-3 KMT - Year of manufacture: 2006 - Machine type: bottle dryer (air knife tunnel) - Conveyor: plastic chain, 120 mm wide - Power supply: 400 V, 3 phases, 50 Hz - Control voltage: 24 V DC - Overall dimensions (L x W x H): 4,500 x 1,350 x 2,600 mm Hedpfxsz Hb Nuo Aqgsfn Equipment - Drying tunnel with inclined air knife nozzles above and on both sides of the conveyor, fed by vertical air ducts - Infeed screw and curved conveyor sections with adjustable guide rails and quick-release clamping levers - Siemens SIMATIC touch panel (French, Dutch, German) with output counter, selector switches and emergency stops - Control cabinet with four Danfoss VLT 2800 frequency converters - Stainless steel frame on adjustable feet, enclosure with transparent hinged guard doors - CE marked Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Year of construction: 2019, condition: like new (used), 2 Quantity Antares Vision Matrix Stations - Top View Standalone module for off-line semi-automatic carton/bottle-to-case or bundle-to-case aggregation The Matrix Station Top View is a standalone aggregation module for off-line manual packaging operations. It is designed to allow Pharma Industries to establish a reliable and consistent hierarchical relationship “parent-child” throughout the composition of packaging from lower level to higher one, such as folding box/bottle to case or bundle to case. The operator inserts the individual packaging into the shipping carton layer by layer. Each completed level is photographed from above by a high resolution auto-focus camera through an automatic trigger. Dedicated software monitors the progress and when the number of units and layers is reached, a label is generated. The Matrix Top View is also able to handle higher aggregation levels, boxes on pallets. Aggregation station designed to maximize productivity in the manual packaging operations. Performs multiple reading from the top of the Datamatrix codes on cartons or bottles when fit into a case, managed as units or as aggregated bundles. The vision head is equipped with camera system and integrated LED lighting to read each layer of cartons during case composition. Hsdjyb Tw Rjpfx Aqgjfn AUTOMATIC FOCUS ADJUSTMENT FOR EACH CASE LAYER READING MULTIPLE READING WINDOW (mm): 600×420 ERGONOMIC DESIGN OPTION: TRANSPORTABLE ON WHEELS