Used Fenice Plain for sale (162)

Condition: used, Single-column eccentric press RICHTER type PEKRS 80 Year of construction 1970 - overhaul 2024 Compressive force 80 ton. throat depth 350 mm Table size 900 x 650 mm Hole in the clamping table Ø 200 mm ram surface 700 x 500 mm Stroke rate 70 strokes/min. Stroke adjustment 6 - 100 mm ram adjustment 85 mm Installation height max. 400 Clamping pin bore Ø 50 mm Table height above floor 810 mm Motor power 8 kW Mains connection 400 Volt, 50 Hz - ORTLINGHAUS pneumatic clutch/brake combination - HERION XSz 32 press safety valve - Pneumatic ram compensation cylinder - Overload protection with breaker plate in ram - Central grease lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest UVV with new electrics Control conversion in 05/2024 - suitable for manual insertion work - in accordance with DGUV Information 209-030 Press inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machine tools - Presses - Part 1: General safety requirements EN ISO 16092-2: Machine tools - Safety of presses - Part 2: Mechanical presses Pedpsi Db Ibofx Ag Djgk - Control system with plain text error messages and diagnostic screen for rapid fault localization - New electrical cabinet, mounted on the side of the machine - completely based on SIEMENS, with PLC S7-1200 PROFIsafe and 7" TFT touch display - Two-hand control panel with emergency stop and engagement lock - el. foot switch - Cam switch unit with run monitor control - Stroke release via HERION XSz 32 press safety valve with pneumatic pressure compensator - New wiring of the machine - Updated operating instructions The machine is equipped with 6 operating modes: 1 = Set-up 2 = Single stroke two-handed 3 = Single stroke foot 4 = continuous run foot 5 = automatic continuous run 6 = reverse run

Condition: good (used), Vötsch VTU 100/150 heating and drying cabinet Manufacturer: Vötsch Type: VTU 100/150 Nominal temperature: 250 °C Usable volume: 1500 m³ Total load: 400 kg Nominal power: 27 kW Connected load: 29 kW Nominal current: 42 A Mains connection: 400 V, 3 PH+N PE, 50 Hz Weight: 780 kg Microprocessor-controlled temperature and program controller Jumo two-point controller Digital display of setpoint/actual temperature, plain text display Easy loading of the device floor via folding ramp Dimensions Psdpfxoxbgt De Ag Dsgk Interior: (W x H x D) 1000 x 1500 x 1000 mm External: (W x H x D) 1840 x 2389 x 1450 mm Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: good (used), Ultrafilter ultraaqua autoclean 0016 AC Donaldson Ultrafilter ultrafiltration system for compressed air compressor condensate Oil/water separator for compressed air condensate. ● Treatment plant for separating compressed air condensate and condensates with difficult separation properties (e.g. stable emulsions) by means of cross-flow filtration ● Physical separation principle guarantees residual oil content of < 5 mg/l in water Intelligent control concept with programmable control for safe analog operation, incl. plain text display by means of text display, Fault monitoring via alarm messages with potential-free contacts and optional external network connection Optimized cleaning by comparison of input/output extends cleaning intervals and saves operating costs ● Thermally and chemically highly resistant ceramic membrane with long service life ● Antifreeze protection with integrated heating ● High-quality, corrosion-resistant materials for vessels, piping, pumps, seals, and valves Manufacturer: Donaldson Ultrafilter System type: ultraaqua autoclean 0016 AC Electrical data: 3 x 380 V, 50 Hz, 2.6 kW Psdpfx Ajidx Uieg Dogk Compressed air: pmin: 5,5 bar, pmax: 8,5 bar, Pneurop 4 Water: pmax: 5 bar Membrane: pHmin: 1, pHmax: 11, tmin: 5°C, tmax: 70°C Financing through our bank is also possible. komplett-konzept.leasingo.de You can find additional filtration systems in other sizes—new and used—in our shop! International shipping costs upon request!

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal wire and strip bending machine Wire feed Plain text display Press force monitoring Wire straightener Bosch wire stripper Holder and brush motor with mounted tool W32/1-32 Soundproof booth Barrel CU wire with punched parts Switch cabinet Item condition: very good Description of the manufacturer, deviations possible.  You buy the machine as it can be seen on the pictures.  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines. Pgedpfxoh I Nrqe Ag Dsk Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal wire and strip bending machine Wire feed Plain text display Press force monitoring Wire straightener Bosch wire stripper Holder and brush motor with mounted tool W32/1-32 Soundproof booth Barrels of CU wire with punched parts Switch cabinet Item condition: very good Description of the manufacturer, deviations possible.  You buy the machine as it can be seen on the pictures.  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request! Pgedpsg T S T Esfx Ag Djk

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire Feeder Plain Text Display Press Force Monitoring Wire Straightener Bosch Stripping Machines Bracket and Brush Motor with Mounted W32/1-32 Tool Soundproof Cabin Drums of Copper Wire with Stamped Parts Control Cabinet Item Condition: Very Good Manufacturer's Description, Deviations Possible. You are purchasing the machine as shown in the pictures. Complete factory closure, large selection of storage platforms, pallet racks, shelving units, and paternosters. Podpfx Agjg T S Tae Degk High-quality industrial machines, lathes, grinders, and hand tools. Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire Feed Plain Text Display Press Force Monitoring Wire Straightener Bosch Stripping Devices Bracket and Brush Motor with Attached W32/1-32 Tool Soundproof Cabin Barrels of Copper Wire with Punched Parts Control Cabinet Technical Specifications: Drive Power: 7.5 kW Speed (min. - max.): 40-250 rpm Pgjdpfxsg T S Tde Ag Djk Press force / punching unit: 200 kN Longitudinal feed: 250 mm Longitudinal strip width: 50 mm Wire diameter: 6.0 mm Machine weight: 3500 kg Dimensions without electrical components (L x W x H): 3600 x 1500 x 2400 mm Item condition: very good Manufacturer's description, deviations possible. You are purchasing the machine as shown in the pictures. Complete factory closure, large selection of storage platforms, pallet racks, shelving units, and paternosters. High-quality industrial machines, lathes, grinders, and hand tools. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more punching and bending machines - new and used - in our shop! International shipping costs upon request!

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire Feed Psdpfx Agsg T S Tto Dogk Plain Text Display Press Force Monitoring Wire Straightener Bosch Stripping Devices Bracket and Brush Motor with Attached W32/1-32 Tool Soundproof Cabin Drums for Copper Wire with Punched Parts Control Cabinet Drive Power: 7.5 kW Speed (min. - max.): 40-250 rpm Press force / bending slide: 80 kN Press force / punching unit: 200 kN Longitudinal feed: 2050 mm Longitudinal belt width: 50 mm Wire diameter: 6.0 mm Machine weight: 3500 kg Dimensions without electrical components (LxWxH): 3600 x 1500 x 2400 mm Item condition: very good Manufacturer's description, deviations possible. You are purchasing the machine as shown in the pictures. Complete factory closure, large selection of storage platforms, pallet racks, shelving units, and paternosters. High-quality industrial machines, lathes, grinders, and hand tools. Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Schulz roller curve conveyor left with straight section 90°-450-390 IR1400+250-450-390 RA1186 Roller curve: Manufacturer: Schulz Angle: 90° Useful width (NUB): 390 mm Nominal/outer width (NB):: 450 mm Inner radius (IR): 1400 mm Speed: v = 0.35 m/s Straight section: Conveying length (FL): 250 mm Useful width (NUB): 390 mm Nominal/outer width (NB):: 450 mm incl. side guides on both sides Castors: plain bearings with conical plastic molded part Transport dimensions: L x W x H = 1900 x 450 x 400 Transport weight: 100 kg Scope of delivery: incl. side guides on both sides without supports (please enquire if required) Supports optionally available: Pgsdsk Aa H Sopfx Ag Dek 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 2003, condition: used, Ami pallet transfer transfer roller conveyor chains 90° 1750-1397-1262-1100 RA2296 Make: AMI Running direction: both directions Roller width (RB): 1080 mm / 1100 mm profile spacing Nominal/outer width (NB): 1262 mm Length: 1397 mm Diameter of rollers: 89 mm Frame height: 160 mm Roller spacing: 175 mm Chain transfer motor: SEW motor 300-500 V, 0.37 kW Lifter motor: SEW motor 300-500 V, 0.5 kW Roller conveyor motor: SEW motor 300-500 V, 0.37 kW Conveyor speed: 0.15 m/s Chain spacing: 450 mm total width: 950 mm Transfer length chained: 1750 mm Chain type: Double chain, mounted on plain bearings Scope of delivery: incl. supports, Height 500 mm (top edge of rollers) Psdetug S Dspfx Ag Dsgk Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, RA1188 Schulz roller curve 90° roller curve conveyor 450-390 IR1220 Manufacturer: Schulz Angle: 90° Useful width: 390 mm Nominal/outer width: 450 mm Inner radius: 1220 mm Conveying speed: v = 0.35 m/s incl. lateral guides on both sides Roll: Type: G6/50 plain bearing with conical plastic moulding Transport mask: L x W x H = 1600 x 550 x 600 Transport weight: 100 kg Scope of delivery: without supports (if required, please inquire) Optional: Supports 70,00€ per piece Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Psdpfew Dwbgsx Ag Degk Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Schulz roller curve conveyor right with pre- and post-run 90°-450-390 IR1570+2x250-450-390 Podpfx Ajk Aa Iajg Degk RA1187 Roller curve: Manufacturer: Schulz Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR) = 1570 mm Speed: v = 0.33 m/s Straight section: Conveying length (FL): 2x 250 mm, inlet and outlet Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Castors: plain bearings with conical plastic molded part Transport dimensions: L x W x H = 2000 x 800 x 400 Transport weight: 120 kg Scope of delivery: incl. side guides on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: ready for operation (used), Drilling diameter: 3-25mm, drilling depth: 1000mm, connected load: 36kW, control: EST, 99 drilling memory positions per program, grinding and coordinate programming, plain text programming via input mask. Accessories: paper band filter, coolant cooling system, 4-door control cabinet, high-pressure pump up to 150bar, oil tank, 1 steady rest for smaller diameters at large drilling depths, direction-adjustable holder for drill bushing holders, various drill bushing holders, long clamping table for 0-height, tailstock stop and base plate for machine vice freely movable on the additional table, matching precision machine vice optionally available. Speed, high pressure, Z-axis (feed), X/Y-axes, and W-axis (approach slide) programmable via control. CPU and card rack defective (fan fault), machine therefore not operational, drives and guideways were fully functional until last operation. An on-site inspection is possible. Pjdpfsylbrqox Ag Djgk

Condition: used, Year of construction: 2023, Used system Year of manufacture: 2023 Condition: As new, system has only a few operating hours Equipment and technical specifications: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and wood chips - Fan: 2 x 7.5 kW - Airflow rate: 10,000 m³/h at - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs à 2.50 m Pgedpfeyk I U Aox Ag Dek - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter surface load: 129 m³/(m²x h) - Filter cleaning: AL-KO OPTI JET® - Pressure relief panels: 0.84 m² (bursting discs) - Lower section with discharge chute and rotary valve Dry discharge with C-coupling Comprising: - ECO JET DUO 6 UPPER PART, 2 x 7.5 kW: Clean air filter system; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; Incl. pressure relief panels and dry discharge with C-coupling; without filters and control; Incl. pressure sensors - ECO JET DUO 6 ZWR XL - 1100 MM: Intermediate ring for expansion or unit height increase with 2 inlet connections for suction nozzles - Base frame with discharge chute and integrated rotary valve 960/1 FG: For disposal of chips via on-site transport fan into existing silo or similar Transport pipe DN 200 mm, approx. 1,260 mm long under rotary valve, connection to transport pipe to be provided by buyer Rotary valve certified according to ATEX Directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (Unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor output: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class / mounting: IP 54 / B3 Insulation class: F Speed: 41 rpm Discharge capacity*: 15,744 l/h* Number of cells: 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pcs required Filter BIA category 'M' – electrically conductive; 2.50 m long, incl. support cages; 77.6 m² filter area - Inlet nozzle 400 mm: with backdraft damper in rectangular duct - ECO JET backdraft damper 910x346x500 - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency inverter (FU) up to max. 37 kW; corresponding performance module and controls as well as the frequency inverter are included in the basic unit; the FU is installed in the control cabinet Cascade control with FU handover: Fan 1 operates on the frequency inverter; when threshold is reached, switches to mains operation; Fan 2 takes over FU and regulates as needed; Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault warning Display of fault message as plain text on display and collective fault indicator on the door Manual discharge start via display button Start filter cleaning via differential pressure Manual filter cleaning start via button Post-cleaning Fire monitoring

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Version with continuous chassis, newly manufactured in self-supporting ALU construction with corresponding reinforcements in the lower chord for particularly high stability and strength, cross member 140mm high reinforced version (for high floor load) additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to support structure Axles and suspension: Disc brake 22.5, Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA readable in the SZM (display), 1st axle with starting aid (new EC regulation, without SZM equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels: 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on steel rims silver, 11, 75x22.5 ET 120 Kingpin: 2" - screwed into a 10 mm thick plate Fifth wheels: mechanical landing gear with two speeds, 2x 20 tons drawbar load with swivel foot Brake system: according to E.G. standard, EBS E system Wabco with RSS system (Roll-Stability-Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear, ALU air reservoir system Electrical system: according to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the ALU rear end, 24 volt system with 1x15 pole and 2x7 pole socket, with side outline lights in LED design, 2 reflective panels on the rear, front pole lights 2x white, rear 2x red, 2 sep. halogen reversing lights integrated in the U-protection Pjdpfxefi Nmwe Ag Djgk Body/body: Body fully welded on the inside, reinforced side walls Side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400 aluminum trough, side walls 30mm thick ALU plank profiles (2-3 mm) 600mm wide completely welded in with bottom and top chord, plank profiles fully welded inside, floor laid as a moving floor system on 140mm ALU cross beams, floor stacker load approx. 9 to/m2 Cross beams mounted correspondingly narrow (approx. 350mm), design, special aluminum corner profiles in bevelled design smooth rear wall in straight design with 2 ALU hinged doors 50/30mm thick with 2 espagnolettes Locks in welded-in ALU rear frame fixed in Teflon bearing and Inox bearing, Doors secured in open position with one chain on each side, hard wear plates on the side walls approx. 2000x1500x4mm fully welded, moving residual emptying wall with Kevlar tarpaulin approx. 1800mm long plus side brushes with Kevlar tarpaulin seal, service door in front wall with ladder turning inwards Hydraulic system: Moving floor system in the floor with hydraulically moved ALU profiles on ALU square profiles with approx. 880 PE-HD sliders plus anti-lifting plain bearings, type CF 10mm floor version, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate possibility for connection of the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design still to be specified, operating pressure 190-max.240 bar, ALU end pieces welded into the sliding floor, electrical operation behind left with remote control integrated in a lockable watertight box, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash plates above the wheels, 1 ALU e-wheel holder, lateral ALU collision protection in folding design, 1 tool box approx. 860x460x400mm in plasti

Condition: ready for operation (used), A comprehensive package of spare parts from Tetra Pak is available. Machines: Tetra Pak packaging systems and related equipment. Spare parts: Sleeve for pipe connections, cone ID6xD6mm aluminum, cutting ring 6mm, spacers, spring 1.00x12.00x50.0mm 1. 4310, screw M5x12, sealing ring 8x14mm, O-ring 15x2mm, retaining ring DIN 471, valve spring, bearing 6001-2RS, plain bearing bush 10x12x15mm, hose connector 6mm, seal EPDM, connection nipple R1/8, guide bush 20mm, plastic sealing cap, insulating washer 22x3mm, clamping element and others. Documentation available. Podeww Iv Iopfx Ag Djgk

Condition: new, Year of construction: 2026, Three-phase 400V motor with frequency converter (kW) 3 Saw blade dimensions (mm) 5200 x 34 x 1.1 Flywheel diameter (mm) 480 Cutting speed (m/min) 20 – 120 Clamping width (mm) 610 Working height (mm) 780 Machine dimensions without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard features Ergonomically designed, robust welded frame construction for miter cuts from 0° to 60° right/left Sturdy, low-vibration frame construction with arm joint mounted on plain bearings Clearly arranged control panel on the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for maximum cutting performance Cutting Accuracy Requirements Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed: hydraulic including automatic cutting pressure regulation Miter adjustment and clamping (manual) Hydraulic full-stroke cylinder for vise (pull-down version) Floating vise Blade tension and saw blade breakage monitoring Easily removable chip collection trays Hydraulic blade tension indicator Integrated coolant supply (30 l tank capacity) LED work light Digital miter indicator Including saw blade with 3/4 combi-toothing Machine color: - Saw frame RAL 7035 - Machine body RAL 7005 12-month warranty for single-shift operation Please inquire about additional accessories. Pjdpfoukgiqjx Ag Dogk DELIVERY: FREE DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Technical details: Magnetic plate: 900 x 450 mm Heidenhain measuring system Automatic feed Cross movement electrically and manually via handwheel Vertical movement electrically and manually via handwheel Longitudinal movement hydraulically and manually via handwheel Pgjdpfxeyhwhws Ag Dsk Grinding spindle with plain bearings

Condition: used, mileage: 41,599 km, power: 96 kW (130.52 HP), first registration: 01/2023, fuel type: diesel, overall weight: 3,400 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Subject to errors and prior sale! Internal number: 1163. MU07171 ---- EQUIPMENT * Audio system 24: Ford audio system including Ford SYNC3 with AppLink, DAB/DAB+, navigation system. Radio (FM/AM) 8"play (20.32 cm) 4 speakers FordPass Connect Wi-Fi hotspot Integrated control panel and audio remote control on the steering wheel Ford SYNC 3 with touchscreen (hands-free system with voice command control, SMS reading/sending function, Bluetooth, emergency call assistant...) AppLink (extended voice control, private mode, support for Android Auto and Apple CarPlay, capacitive touchscreen technology, ..) dynamic navigation. Lane recommendation Road map for Western Europe * Seat package 13 - Partition (through-loading hatch), with window (Custom Truck Trend) - Driver's seat, 4-way adjustable (forward/backward, backrest, seat cushion inclination, height) - Double passenger seat with storage compartment under individually foldable seat cushions - Headrests, height adjustable - Tray integrated in the double passenger seat (foldable) - Inside armrest for driver - Manual lumbar support (driver's seat) - TREND seat cover: fabric - Partition (loading hatch), with window - Double-wing rear door with 180° opening angle (with window) - with heated rear windows - LED lights in the cargo area - Gearbox: 6-speed - Electronic ABS with EBD - Driver's side airbag - On-board computer - Flat roof - Headlining in driver's cab - Double-wing rear door/180° (without window) - Tachometer - Third brake light - Electronic safety and stability system - Electric front windows - Ford Easy Fuel - FordPass Connect - Generator, 240 A - Cruise control, leather steering wheel. - Lockable glove compartment with lid - Interior lighting with delay switch. - Air conditioning in the front - Paintwork: plain paintwork - Cargo area lighting - Cargo area floor: vinyl floor covering - Adjustable steering column - Emergency brake support including emergency brake - Package: Style color package - electric - Particle filter: diesel particle filter - Headlight dipped beam/daytime running light - Sliding door entry light automatic - Sliding door: Sliding door, right - Mud flaps front and rear - Side protection strips - Low side paneling - Power steering - Seat belts - Start-stop system - Socket: 12-volt connection - Front bumper in vehicle color - Lashing eyes 8 - Immobilizer - Heat-insulating glazing, slightly tinted - Central locking with remote control - Auxiliary heater, electric ... and much more ---- The vehicle is unprocessed! Nationwide delivery possible for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as a trade-in. Financing/leasing also possible without a down payment! Do you have any questions? We are happy to advise you! Pgedpsr Ich Iofx Ag Dek

Condition: used, mileage: 71,000 km, power: 77 kW (104.69 HP), first registration: 05/2017, fuel type: diesel, overall weight: 2,600 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total width: 2,032 mm, total height: 1,964 mm, loading space length: 2,411 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Subject to errors and prior sale! Internal number: 0499. GW22HM28441 ---- SPECIAL EQUIPMENT -- Audio system - Seats: Seat package 4 - Partition (with loading flap), without window (custom truck basis) - Driver's seat, 4-way adjustable (forward/backward, backrest, inclination, height) - Double passenger seat with storage compartment under individually foldable seat cushions - Headrests, height adjustable - Armrest inside for driver - BASIC seat cover: fabric - Partition (with loading flap), without window Standard equipment Pgedpfjq Hrq Nox Ag Dek - 6-speed gearbox - Electronic ABS with EBD - Driver's side airbag - Outside mirrors, manually adjustable (2) - On-board computer - Flat roof - Double-wing rear door/180° (without window) - Tachometer - Electronic safety and stability. - No vinyl floor covering - Electric front windows - Ford Easy Fuel - Generator, 220 A - Halogen headlights with daytime running lights - Glove compartment with lid - Interior lighting with delay switch. - Paintwork: plain paint - Cargo area lighting - Adjustable steering column - Emergency brake support including emergency brake - Particle filter: diesel particle filter - Sliding door: sliding door, right - Side protection strips - Power steering - Seat belts - Socket: 12-volt connection - Lashing eyes 8 - Immobilizer - Heat-insulating glazing, slightly tinted - Central locking with remote control - Auxiliary heater, electric ... and much more ---- The vehicle is unprocessed! Nationwide delivery possible for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as a trade-in. Financing / leasing also possible without a down payment! Do you have any questions? We'll be happy to advise you!

Condition: new, The machine individual 520.360 DGH is a semi-automatic double mitre band saw in two-column design. The mitre range of the saw extends from 30° left continuously to 30° right. The model individual 520.360 DGH has a hydraulic full stroke vice and an easy to use control in plain text display. Standard equipment details - Double mitre 30° - 45° - 90° - 45° - 30° - Hydraulic full stroke vice - Saw frame mounted on preloaded linear guides - Infinitely variable saw band speed Pjdpfxsdyn H Te Ag Djgk - Infinitely adjustable saw feed and cutting pressure - Automatic cutting pressure regulation - Precision carbide saw band guides - Powerful drive motor with 3,0 kW - Modern control with plain text display and membrane keyboard - Freely positionable control panel - Large dimensioned hydraulic unit - Machine designed according to current CE standards and safety guidelines inclusive: Minimum quantity lubrication digital mitre gauge frame height adjustment at the control panel price on request

Condition: new, roll diameter: 100 mm, roll width: 35 mm, The scope of delivery includes: 01x swivel castor, new Castor material: Polyamide wheel Plain bearing with bearing marks Castor material color: cream white Total height: 130 mm Castor Ø: 100 mm Castor width: 35 mm Rotation radius: 360° Panel dimensions: 105 x 80 mm (WxD) Screw grid: 80 x 60 mm (WxD) Drill hole Ø: approx. 11 mm Number of drill holes: 04 pcs. Weight / pc.: approx. 0.700 kg Advantages compared to PA wheels: - The PA wheels are very low-wear. - They leave no marks on the floor. - PA wheels have a very low rolling resistance. General information about the item: Pedpfxertplrs Ag Dogk This item is only available for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, roll diameter: 100 mm, roll width: 35 mm, The scope of delivery includes: 01x double-stop brake roller, new Roller material: Polyamide wheel Plain bearing with bearing marks Roller material color: cream white Material color frame: galvanized Total height: 135 mm Castor Ø: 100 mm Castor width 35 mm Rotation radius: 360° Panel dimensions: 105 x 80 mm (WxD) Screw grid: 80 x 60 mm (WxD) Pjdortplnjpfx Ag Dogk Drill hole Ø: approx. 11 mm Number of drill holes: 04 pcs. Weight / pc.: approx. 0.908 kg Advantages compared to PA wheels: - The PA wheels are very low-wear. - They leave no marks on the floor. - PA wheels have a very low rolling resistance. General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, functionality: fully functional, machine/vehicle number: 35500, mileage: 123,900 km, power: 316 kW (429.64 HP), first registration: 12/2020, fuel type: diesel, overall weight: 32,000 kg, axle configuration: 8x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, loading space volume: 37.5 m³, Equipment: ABS, air conditioning, airbag, central locking, cruise control, differential lock, electronic stability program (ESP), power assisted steering, power mirror, tachograph, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental service! Further comparable vehicles available upon request. Psdpfx Ajyc Sf Aog Degk ABS, ASR, ESP, disc brakes, steered trailing axle, differential lock, air-suspended rear axle, speed limiter, aluminum fuel tank, 400 liters + 60 liters AdBlue, underride protection, rocker brake, cruise control. Wide-angle mirrors adjustable and heated, rear-view mirrors electric and heated, digital tachograph, radio, air conditioning, roof hatch, driver comfort seat, onboard computer, start assist, tinted windows, sun blind, fine/pollen filter, central locking, entry lighting, EDC engine management, headlight levelling, OBU preparation, adjustable steering wheel. Rear section: "XL-Whale" net loading volume 37.5 m³; intake chute net volume: 9.6 m³; compaction plate with floor scraper; hydraulic folding cab protection roof; cab protection roof made of GRP; follower panel with inverted cab protection roof; third hatch as windscreen; low-noise and low-wear vane cell pump; ergonomic control unit, all loading functions operated with a single joystick and operator guidance via color display; unloading function operable from the cab; self-diagnosis system with plain text display; forks, double-sided adjustment (adjustment range 1,280mm–1,890mm) and integrated 1.1 container mount (containers to 840 2-3 standard); LED arm marking lights, without turn signal; 2 arm guide rollers in tilting position; 1x LED rotating beacon mounted on top rear; 1x LED work light on the intake chute; 1x LED work light behind the cab; 2x LED swan-neck position lights, lower marker lamps; 2x LED upper marker lamps; 1 LED rotating beacon lower rear right; 2 LED flashers front under protective roof; 2 front LED work lights; 2 rear axle illumination LED work lights with 15 km/h switch-off; 2 LED reverse lights, left and right, activated with reverse gear; central lubrication system incl. electric pump; camera system – front camera, rear area monitoring, and roof camera for intake chute observation; remote control with positional linking; engine speed increase via remote control; contour marking. Mount for shovel and broom; aluminum ladder with access limitation; 2x 'A' markings; fork scale – MOBA.

Condition: used, functionality: fully functional, machine/vehicle number: 34104, mileage: 21,490 km, power: 290 kW (394.29 HP), first registration: 02/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, loading space volume: 33 m³, Equipment: ABS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), power assisted steering, power mirror, tachograph, traction control, truck registration, The mileage of the vehicles on offer may vary, as some units are currently in rental use! Further comparable vehicles available upon request. M2Q engine: OM470, inline 6-cylinder, G2B transmission G 211-12/14, steered trailing axle, 290 l fuel tank, 60 l AdBlue, front underrun protection, ABS, ASR, ESP, lane keeping assist, attention assist, Active Brake Assist 5, cruise control, tyres: 1st axle 385/55 R22.5, 2nd and 3rd axles 315/70 R22.5. MirrorCam, comfort driver’s air suspension seat, functional co-driver’s seat, multimedia cockpit, navigation system, digital radio, air conditioning. Pgjdpfx Asyc Scnsg Dok Rear section: "L-Kelpie" net loading volume 33 m³; net hopper volume: 9.6 m³; packing plate with floor scraper; hydraulic folding cab protection roof; GRP driver’s cab roof guard; follower panel with inverted cab protection cover; third hatch as wind deflector, Sulo lid opener; quiet, low-wear rotary vane pump; ergonomic control panel, all loading functions operated with a single control lever (joystick) and operator guidance via colour display; discharge function operable from the cab; self-diagnosis system with plain text display; fork carriage, adjustable on both sides (adjustment range 1,280mm-1,890mm) with integrated 1.1 mount (bins to EN 840-2/3); LED arm position marker lights, no turn signal; 2 arm guide rollers in tipping position; 1x LED rotating beacon on the upper rear; 1x LED work light at charging hopper; 1x LED work light behind the cab; 2x LED gooseneck lamps, lower marker lights; 2x LED upper marker lights; 1x LED rotating beacon rear lower right; 2x LED strobe lights front under the protective cover; 2x LED work lights at the front; LED surround lighting with 15 km/h automatic shutoff; 2x LED reverse lights on both sides, linked to reverse gear; central lubrication system incl. electric pump; camera system—front camera, rear area monitoring, and roof camera for the hopper; radio remote control with positional binding; engine speed adjustment via remote control; contour marking; holders for shovel and broom; aluminium ladder with climb limiter; 2x class A markings; MOBA fork scale.