Used Flap Element Passage Flap for sale (5,417)

Condition: excellent (used), Year of construction: 1993, OMAG TRONIC 140/120 complete line; production pallet size 1450x1100 mm, double-feed machine, year of manufacture 1993, rotating storage trolley, repacking with strapping, 10 moulds, Siemens S7 control. Blsdpfx Aexl D Imehmjn

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Bjdpfx Ahjykvdlomjln Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: ready for operation (used), Year of construction: 2000, X-ray inspection system, based its operation on the difference in density, i.e. on the different level of absorption of the rays, of the foreign bodies in the product. It detects contaminants such as: bones, stones, ceramics, PVC, Teflon, glass, rubber, fiberglass, etc... Blsdpfxewzatas Ahmen Non-ferrous metal contaminants and non-magnetic stainless steel, also inside metal film or aluminium foil packages. Package defects such as deformation and cracking Integrity and filling level, also in closed packages Presence of necessary elements such as: surprise inside a chocolate egg, needles in a ready-made shirt Weight control and air bubble detection Mounted on a conveyor belt of 100 x 2600mm length. Maximum admissible product passage 100 x 270mm.

Condition: excellent (used), Year of construction: 2014, I sell the BIESSE line consisting of: Biesse Winner WRT loading infeed device 1-channel Biesse control station for failure elements Biesse Edge 1 shaped elements edge banding and element working station Biesse Edge 2 shaped elements edge banding station Biesse Edge 3 shaped elements working station Biesse Edge 4 shaped elements working station with drilling and inserting Wandres cleaning device Biesse Winner WRT unloading outfeed device 1-channel Manufacture year 2014. Available immediately. Possible to see at work. Possible to adjust for certain product. For more photos and details please send the request. Bedpfx Aeznfd Ushmsln

Condition: new, Year of construction: 2026, The SQUALO 522 Multiblade or Double Shaft Multiblade Circular Saw is a technological machine, essential in a modern sawmill to optimize the production of sawn timber. Blodpfx Ahslz S Rbemsn Ideal for the production of strips, squares, sawn timber, profiles, trimmed boards, prisms, tablets, elements for pallets. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE Double shaft multi-blade: Squalo 525 motor powers from 55 to 132 Kw Description Details Conveyor belt width mm 520/620 Width Conveyor rollers at the entrance mm 510 Width Conveyor rollers at the exit mm 610 Max saw group width mm 500 Max cutting height mm 220 Min. Length of work mm 1000/1200 Max passage width mm 800 Blade shaft diameter mm 80 Max diameter circular blades mm 400 Blade hole diameter mm 100 Blade shaft speed rpm 3.800 Speed of advancement mt/min 3 – 60 Weight 9.500 – 10.500 Kg Overall dimensions mm 2720x2515x2105h

Condition: used, mileage: 254,892 km, power: 125 kW (169.95 HP), first registration: 08/2016, fuel type: diesel, overall weight: 7,000 kg, next inspection (TÜV): 10/2025, color: green, gearing type: mechanical, emission class: euro5, number of seats: 2, total length: 8,600 mm, total width: 2,500 mm, total height: 3,300 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, parking heater, * Former butcher's sales vehicle * Counter flap opens electrically * Various refrigeration units * Washbasin * Passage from the cab to the box body Bjdpfx Ahjyxt Ewsmsln * Rear door * Counter * Auxiliary heater * Radio * Central locking * Rear view camera * Air conditioning * And much more * Subject to errors, modifications, and prior sale

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L – Like New – Only 10 Minutes of Use – Wide-belt sanding machine including version for intermediate sanding of coatings Special price for showroom machine – in-house exhibition machine – - Robust, space-saving W-type wide-belt sanding machine for the highest demands. - Constant working height thanks to adjustable headstock - Working width: 1350 mm - Top-grinding, with 2 sanding units - Grooved rubber contact roller in proven hardness - Contact roller level adjustable in stages according to a grit scale - Electric raising/lowering of the contact roller according to the selected unit - Electronically controlled segment sanding pad - Entire sanding pad unit adjustable by 10 degrees - Parallel spring-mounted, ground steel pressure roller at the infeed - Rubber-coated pressure roller between the sanding units and at the outfeed - 2 motors, 18.5 KW and 11 KW, 400 Volt, 50 Hz - Motor-driven fine adjustment of the height with digital display - Belt tension, control and oscillation pneumatically controlled Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 KW with transport belt and drive roller - Vacuum device for the entire work table with additional holes of over 200 mm for smaller workpieces - Automatic thickness adjustment over the entire working width - Workpiece over-thickness protection with feed instant stop and lifting mechanism - Infinitely adjustable chip removal rate - Electronic feed control on the control panel, infinitely adjustable from 3 - 15 m/min - PLC control with Teach-In memory - Pneumatic belt control - Workpiece support with roller at the infeed and outfeed - Enormatic: Fully automated quick setting and feed release - Eco energy-saving mode - Fault diagnosis - Passage height 210 mm up to 18.5 KW - Sanding belt dimensions 1350 x 2000 mm Perfect – Features: High-quality swiveling plexiglass control panel - 10-inch touch screen - Industry control - Automatic pressure regulation and storage of the sanding pad elements - Electronic compensation of the sanding belt grit size - Cycle counter and operating hour counter Coating equipment - Infinitely adjustable sanding belt speed on the 2nd unit - Spray nozzles for cleaning the sanding belt of the 2nd unit, controlled by the process - Electronic sanding pad with a segment width of 22 mm - Additional sanding pad insert Additional options included with the machine: Fold-down outfeed table extension (without top) C10) LED package Blodpfx Ask Dpp Sjhmsn ASB5+AS3) ECS workpiece blowing system with fan Location: 54634 Bitburg - Available immediately -

Condition: good (used), VanRiet belt conveyor 628 cm long belt width 50 cm Manufacturer: Van Riet Type: Flap element belt conveyor strap length: 628 cm Segment lengths: (1,250 + 6,120 + 1,000 mm) width: 50 cm Frame width: 65 cm track height: 85 cm Design: Driven electric motor: 380 Volt Bledpfx Ahjfgwq Usmsn incl. stud frames Dispatch via forwarding agent possible, please contact us. You will find further articles - new and used - in our shop! International shipping costs on request!

Condition: new, Year of construction: 2025, Sheet metal folder RED PLUS 2200/0.8 incl. foot flapping By applying the hinges and the foot opening the capabilities have been enhanced. And the machine lets for even more accurate work. Technical details: max. working length: 2200 mm Bedpfxocb H Exj Ahmjln bending capacity: 0,8 mm (steel) 1,2 mm (aluminum, zinc and copper) bending angle: max. 140 degrees thickness of bending bar: 15 mm passage: 130 mm Foot flapping to open and close the bending bar Price: 2600 Euro Shipping costs: its dependent on destination point, please ask us, we check Your total shipping costs. Our folding machine RED Plus has to open and close the upper bar a foot flapping. It cans therefore turn to each tool position and you do not ever engage the clamping lever on the right site of the machine. This increases both the accuracy and speed, as well as during positioning of the workpiece at the bending edge. Angle stop for constant bending angle  Weight: 270 kg Dimensions L x W x H: 2450 x 900 x 1100 mm Warrenty 12 months Certificate CE  

Condition: used, Double tilt miter saw for elements with maximum length 1500 mm and maximum width 200 mm, used, tested. nr. 2 motors of 2 hp Bledpjzxg Eujfx Ahmen

Condition: used, mileage: 6,900 km, power: 330 kW (448.67 HP), first registration: 03/2021, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, color: grey, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, 351943, Blodozri Ewjpfx Ahmen 1117707 Optional: Chassis – 2 x swivel seats with seat belts, upholstered in leather, located behind the driver and passenger seats. Selected accessories, superstructure, general: 1112784 Guard rail in front of the rear ramp. 1119215 Aluminum flooring. 1109890 Superstructure made of double-skin profiles, 25 mm, aluminum-anodized. 1 unit, 0.00 EUR. 1109129 Side loading ramp with lifting aid and rubber surface, lockable. 1 unit, 0.00 EUR. 1133343 Step-up aid: folding step with lighting under the entrance door. 1118994 Feed passage with separate external door and 2 vertical sliding windows, access ladder under the door with safety flap. 1 unit, 0.00 EUR. 1129059 Extendable storage compartment "medium". 1117708 Optional: Superstructure, general – Storage space under the living area, accessible from 2 sides via hinged flaps. 1118659 Optional: Superstructure, general – Utility room approx. 1650 mm wide. With cabinets on the left and right, water and power connection 230 V, washing machine 7 kg, PVC flooring, LED lighting (switchable there). Arrangement of cabinets, work surface, etc. to be determined. Selected accessories, superstructure, horse compartment: 1133313 Lockable entrance door with 3-point locking mechanism to the horse compartment. 1 unit, 0.00 EUR. 1114755 Aluminum feed trough in front of the breast bar, continuous. 1109997 Tie-up chain with panic hook (set). 3 units. 1109928 Roof ventilation hatch. 2 units, 0.00 EUR. 1110015 Large roof ventilation hatch, additionally above the feed passage or utility room. 1109998 Electric roof fan. 1114565 Feed table (slightly sloping surface) instead of feed trough. 1 unit, 300.00 EUR. 1113758 Feed trough with water drain in front of 3 horses. 1109895 Rubber flooring, approx. 30 mm thick, liquid-applied. 1 unit, 0.00 EUR. 1109796 Hay net hooks. 3 units, 0.00 EUR. 1119020 Plastic kick plate on the side, left. 1 unit, 0.00 EUR. 1119001 Plastic kick plate in front of the horses. 1 unit, 0.00 EUR. 1119219 L-shaped partition made of aluminum with PVC covering, transparent. 2 units, 0.00 EUR. 1109993 Ramp limitation, aluminum (left and right). 1110022 Dim lighting. 1119019 Rear wall of the horse compartment with rubber padding. 1 unit, 0.00 EUR. 1114564 Sliding wall on the feed trough/table, 2-part. 1133023 Soft rubber flooring. 1111984 Temperature monitoring (recording, separate printing of measurement data possible). 1118998 Partition support profile, aluminum, rounded. 1 unit, 0.00 EUR. 1133027 Partition (H or L), sliding. 1113754 Video surveillance for horses, reversing camera, 7" quad-split monitor, 2 cameras. 1109996 Horizontal sliding window behind the horses. 1117709 Optional: Horse compartment. Errors and prior sale are subject to change.

Condition: like new (used), 3 unused clamping elements Dimensions, W x D approx.: 100 x 150 mm Total height: 91.5 mm Jaw width: 30 mm Lowest support height on jaws: 68.5 mm Bedpfx Ahozwt Rnemsln Medium support height: 80 mm Clamping height per jaw approx.: 11.5 mm

Condition: used, Year of construction: 1989, table length: 2,240 mm, table width: 1,400 mm, workpiece weight (max.): 5,000 kg, controller model: Siemens 840D, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item on time, no later than October 31, 2026! TECHNICAL DETAILS Longitudinal adjustment of the table (X-axis): 2,000 mm Transverse adjustment of the intermediate slide (Y-axis): 1,600 mm (1,500 mm) Vertical adjustment of the crossbeam (W-axis): 900 mm Adjustment of the drilling spindle (Z-axis): 400 mm Distance between the table clamping surface and the spindle head: min. 100 mm Distance between the table clamping surface and the spindle head: max. 1,400 mm Passage between the columns: 1,600 mm Workpiece weight max.: 5,000 kg Tool holder: SK 50 Table Width of the clamping surface: 1,400 mm Length of the clamping surface: 2,240 mm Clamping surface: 3.14 m² Number of T-slots: 9 T-slot width: 22 H7 mm Distance between T-slots: 160 mm Adjustment speeds Axis X: 0.1–4,000 mm/min Axis Y: 0.1–4,000 mm/min Axis Z: 0.1–4,000 mm/min Difference between adjacent feeds: 0.1 mm/min Rapid traverse speeds Axis X: 12,000 mm/min Axis Y: 12,000 mm/min Axis Z: 8,000 mm/min Axis ZW: 1,600 mm/min MACHINE DETAILS Control system: Siemens 840D Dimensions & Weight Space requirement (L × W × H): 7,000 × 6,500 × 5,300 mm Weight: 22,500 kg EQUIPMENT Comprehensive documentation Bedpez Hvyzofx Ahmjln All fluids will be drained before collection. Data backup has been saved to a USB drive. A 10-ton bridge crane is available on-site to assist with disassembly and loading. A forklift can be used if arranged in advance.

Condition: used, functionality: fully functional, machine/vehicle number: 32247, mileage: 540,900 km, power: 294 kW (399.73 HP), first registration: 10/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x4, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, suspension: steel-air, loading space volume: 12 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Blsdsz Hmctjpfx Ahmon ABS, ASR, steel bumper, differential lock, reversing camera with a 5" color screen in the cab, cab with 2 seats, driver's seat with air suspension, sunroof, circuit breakers, additional 12V socket in the cab, voltage converter 24V/12V, radio-CD, mirrors heated and electrically adjustable, electric windows, tinted windows with band filter, dust box fixed on the engine tunnel, immobilizer with transponder, air conditioning, cruise control. Tank volume approximately 15 cubic meters, 3-way adjustable partition with manual locking, division of water/sludge in cubic meters 2.5/11.5; 6.5/7.5; 8.7/5.3, full-size lid with hydraulic locking, upper and lower suction connection DN 100, flanged. An intermediate drainage is possible via the upper suction connection (sludge water can be pushed back into the sewer). Vacuum pump Samson V21 (1150 cubic meters/hour), mechanically driven, suction hose cassette DN 100, approximately 18 m long, lying flat on the tank with hydraulic roller drive, permanently mounted suction hose guide above the HD reel, HD pump URACA KD 716-G 60 (330 l/min at max. 170 bar), large hose reel on the bottom flap (120 m HD hose DN 25), hydraulically driven and hydraulically pivoting, with cross-lead spindle and hose deflection roller, small hose reel with 60 m HD hose DN 13, manually driven. A control panel made of stainless steel, mounted on the rear right of the superstructure, with all relevant control elements, a second control panel made of stainless steel, mounted on the large hose reel, and a remote control with the functions vacuum pump on/off, HD pump on/off, engine speed +/- , upper suction connection open/close, emergency stop specifically for the use of the vehicle as a suction truck, hose box on the left over the entire length, tool boxes on the right over the entire length with an open hose box above, storage box and stone box, ladder and vise, spray gun and hand washing facility, a work light at the rear, a work light on the right and left as ambient lighting, rotating beacon at the rear.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,950 kg, maximum load weight: 23,050 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,520 mm, total length: 9,350 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis – Central axle trailer design Fine-grained steel welded construction Gear-supported front leg Hydraulic rear supports Wheel chocks with holder Aluminum side impact protection Without under-run protection Mud flaps at the rear, covering the entire width Mud flaps in front of each axle and anti-splash mud flaps behind each axle Plastic tool box, with insert, w=620/h=360/d=440 mm, lockable with a padlock Blsdozcv D Nepfx Ahmon Extendable widening elements to 3,000 mm Storage compartment for wooden planks in the center + wooden planks 70 mm for widening to 3,000 mm Tie-down points for low-bed trailers Recessed ring-type tie-down points in the outer frame, each rated at 5 tons (can be converted to stake pockets) Tie-down eyes at the top and on the sides in the outer frame, each rated at 10 tons Towing device – Central axle trailer Drawbar with a tested 50 mm tow hitch Axles + Suspension Drum brake axles "Axles/chassis laser-aligned" – reduces tire wear and fuel consumption Last axle with trailing arm steering, with automatic reversing lock controlled via the reversing light, and an additional locking function on the vehicle via a manual button. Air suspension 1st axle – automatic lift axle, additionally manually lowerable, operable with a button on the vehicle Axle lift below the recommended driving height, therefore no guarantee for tire damage Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle EBS, electronic braking system with EBS connector at the front, with connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle height in conjunction with the lift axle; when the lift axle is raised, the loading or overall height increases by 50 mm Vehicle – Driving stability system Trailer Info Center for displaying vehicle data such as axle loads, mileage, and diagnostic/system messages Axle load detection via EBS-CAN bus signal for display on the display in the cab Wheels and tires 235/75 R17.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights in LED with resistor, yellow LED lighting on the sides, license plate lighting in LED 2 white position lights at the front in LED 2 white/red marker lights at the rear in LED 2 x 7-pin fail-safe plugs at the front, with connection cable Additional LED work light at the rear LED rotating beacon with mount Warning signs, LED illuminated and extendable to 3,000 mm Floor Subsequently with 70 mm softwood flooring, steel/diamond plate covering in the wheel arch area Rear slope with 70 mm softwood flooring Low-bed platform including rear slope 7,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Covered with wood Hydraulically operated via towing vehicle’s auxiliary drive with throttle, operation on the left side in the front Hydraulic lateral adjustment of the ramps, individually controllable Hydraulic connection with quick-release coupling NW 10/3, including connection hose Customized transport solution

Condition: new, Year of construction: 2025, the SQUALO 615 multi-blade or multi-blade circular saw with single shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. moreover it is 2-in-1 as it can be configured as a trimming machine with 1 or more movable blades. ideal for the production of strips, squares, sawn timber, profiles, edged planks, prisms, boards, elements for pallets. Rollers / conveyor belt width 620 mm Width of infeed / outfeed conveyor rollers 620/720 mm Max saw unit width 590 mm Max cutting height (without pad) mm 150 (mm 125 Trimming machine) Min. Length working mm 800 Max width passage 800 mm Blades hole diameter mm 80 (mm 104 Trimming machine) Circular blades diameter 250/470 mm (480 mm Trimming machine) Bedpfxjhpbxij Ahmoln Blade shaft speed rpm 3.800 Variable feed speed with ROLLS 3 - 36 m / min Variable feed speed with CARPET m / min 4 - 25 optional: softstarter start

Condition: used, Year of construction: 2023, Milk E-Heating System PHE Electric Heated water Vat with connected Plate heat exchanger to Heat up products such as milk, juice and similar products. This can be used for various applications were the product needs to be pre heated ie. Separation, Homogeniser, Cheese process, Heating Vat, etc. This comes with a fully modernised control panel and frequency inverter for the product pump. Make: DMUK Capacity: 1000-1000 L/h Temperatures: Regulated by the controls Circulation Pump: Included Control Panel: Included VDF: Included Bodpfx Ahey E H Eqemsln Condition: Excellent

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, fuel tank capacity: 630 l, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, loading space length: 6,600 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, power mirror, retarder, soot filter, trailer coupling, - Aluminum fuel tank - Heated exterior mirrors - Heated mirrors - Passenger seat - Differential lock - Speed limiter - Catalytic converter - Automatic climate control - LED lighting - Air suspension - Air-suspended seats - Particle filter - Radio/Multimedia system - Disc brakes - Sun visor Bsdpfxozw Aare Ahmjln - Lane keeping assistant - Windshield - Additional steering axle Internal number for customer inquiries: 6-069 IMMEDIATELY AVAILABLE -> Model and year of manufacture 2026 Mercedes-Benz Actros 2648 L 6x2 PRO CABIN Air suspension Front + Air suspension rear !!! as a dump truck with loading crane PALFINGER PK 22002 EH or FASSI F235 or F255, each with 4 or 6 extensions Vehicle: SECONDARY OIL RETARDER HIGH PERFORMANCE ENGINE BRAKE ENGINE OM471, R6, 12.8 L, 350 KW (476 HP), 2300 NM ENGINE VERSION EURO VI, E TRANSMISSION G 281-12/14.93-1.0 (12-speed automatic) AUXILIARY DRIVE, SINGLE 385/65 R 22.5 315/80 R 22.5 TANK 630 L ADBLUE TANK 75 L, TOW HITCH, STANDARD, D50, VBG (40mm also possible, would be exchanged) DISC BRAKE, ON FRONT AND REAR AXLE CAB VERSION PROCABIN L CAB CAB WIDTH 2.50 M HOT WATER AUXILIARY HEATER, CAB DRIVER'S AIR-SUSPENDED SEAT, COMFORT LEATHER STEERING WHEEL COMFORT UPPER BUNK, WIDE, ADJUSTABLE COMFORT LOWER BUNK REARVIEW CAMERA, TOWING VEHICLE MULTIMEDIA COCKPIT INTERACTIVE 2 WITH NAVIGATION SYSTEM AIR CONDITIONING LED HEADLIGHTS, LED TAIL LIGHTS, LED INDICATORS, FOG LIGHTS LED CRUISE CONTROL AIR HORN Packages: COMFORT PACKAGE, WITH EXTRA PREMIUM COMFORT MATTRESS CLIMATE PACKAGE, WITH NOISE/HEAT INSULATION SAFETY PACKAGE, WITHOUT ROLL STABILITY CONTROL NOISE REGULATION, ACCORDING TO UN-R 51.03 LEVEL 2 DRIVING PACKAGE SMOKER'S PACKAGE CHROME PACKAGE, INTERIOR VEHICLE DESIGN ACCORDING TO GSR, PHASE C MERCEDES-BENZ ONROAD SERVICE ATS WARRANTY ACCORDING TO GENERAL TERMS AND CONDITIONS, 3 YEARS/450,000 KM ATS WARRANTY ACCORDING TO GENERAL TERMS AND CONDITIONS, 4TH YEAR/600,000 KM Superstructure: Platform: Dimensions 6,600 x 2,480 x 1,000 mm Side boards 1x divided (2 flaps) per side, with sideboard relief Substructure: Steel construction KTL + powder coating and/or hot-dip galvanized Perforated frame for good load securing Center lashing bar Toolbox Support leg plates including bracket Cranes: Fassi F235 loading crane: Load capacity at 12.7 m still 1,345 kg or 17.1 m at 740 kg Slew range 400° Double articulated boom system with PROL1NK (overextending boom arm up to 15°) electronic overload protection with FX500 Fassi RCS radio maxi - 6 functions » with 3 joysticks (2-2-2) Emergency stop, as well as optical alarm (90% and 100%) incl. digital slew limitation adjustable FASSI stability control FSC incl. LMB II Control system for 2 additional functions with »2 hose guides / e-dynamic with 4-stage and 6-stage extension in stock alternatively: PK 22002-EH – PALFINGER HIGH PERFORMANCE TRUCK-MOUNTED CRANE -Lifting moment: 205.0 kNm (20.9 mt) -Classification HC1 HD4/B3 according to EN12999 -Fast extension system with return oil utilization and internal oil passage -Double articulated boom with Power Link Plus 15° -Slew bearing with slew cylinders -Slew range 400° -Electronic HPLS control unit (for two pressure ranges) -Single outrigger control...

Condition: new, functionality: fully functional, machine/vehicle number: 800.12_AB, inner dimension height: 800 mm, total width: 1,200 mm, mesh size: 100 mm, 12 x GITTERBOX II.Wahl UPPER FRAME CLIP FRAME Height 800 mm NEW (800.12_AB) 12 lattice boxes / stacking frames Article no. 800.12_VS consisting of 2 elements powder-coated color green slight optical defects = II. choice these are assembled on the Euro pallet and held together with hooks. When not in use, these elements can be stored to save space. Basic dimensions: 1200 x 800 mm Bsdjtvfqpjpfx Ahmjln Height: 800 mm Mesh size: 100 x 100 mm / wire Ø 3.8 mm With flap for easy removal of goods Item is NEW with minimal optical defects Item can be inspected by arrangement We are happy to advise. Photo similar

Condition: new, functionality: fully functional, inner dimension length: 800 mm, inner dimension width: 1,200 mm, 12 x GITTERBOX II.Wahl UPPER FRAME CLIP FRAME Height 1000 mm NEW 12 mesh boxes / stacking frames Article no. 1000.12_AB consisting of 2 elements powder-coated color green slight optical defects = II. choice these are assembled on the Euro pallet and held together with hooks. When not in use, these elements can be stored to save space. Basic dimensions: 1200 x 800 mm Height: 1000 mm Mesh size: 100 x 100 mm / wire Ø 3.8 mm With flap for easy removal of goods Bsdpfx Aetvfm Tjhmoln Article can be inspected by arrangement We are happy to advise you. Photo similar Goods are only offered for collection. Please contact us if you wish to have the item shipped.

Condition: used, Year of construction: 1999, Transnorm belt conveyor belt conveyor 1252-600-500 gate passage RA2049 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 1251 mm nominal/outer width (NB): 600 mm 735 with barings belt width (GB): 500 mm Bledjmqty Hjpfx Ahmsn overall height (BH): 85 mm motor height (MH): 110 mm Motor type: Van der Graaf drum motor Motor power: kW 0.25 230/400 V 50Hz Conveying speed: 1,25 m/s Scope of delivery: without supports (if required, please ask) Optional: Supports with dempers Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2011, Gathering element Kolbus ZU 832.A Year: 2011 Description: - Number of elements: 1 Bodszhvinepfx Ahmsln - Number of gathering stations: 3 - ATC thickness control - Optical sheet control: Signalynx Please note: A total of 3 elements are available - if you are interested, please send us an enquiry Maximum size: 460 x 320 mm Minimum size: 105 x 105 mm Max. mechanical speed: up to 8.000 cycles/h

Condition: as good as new (ex-display), Year of construction: 2009, Transnorm belt conveyor belt conveyor belt flap belt Smart Sort GF 1450-800-700 RA2037 Technical data: Conveyor length (NL): 1450 mm frame width (NB): 800 mm, 150 with motor Blsdpfx Aotg Dhfjhmon Belt width (GuB): 700 mm headroom (BH)/transfer height : 800 mm Conveying speed (v m/s): 1.47 Drive: SEW gear motors, with brake at angle adjustment Electrical data: 50Hz V380-500, kW 0,37 drive belt and 2,2 drive angle height of sorting out bottom: 500 mm sorting height top 1200 mm Angle adjustment speed: 1s from min to max year of construction: 2009 Special feature / accessories: 4x proximity sensors for angle determination Optionally available: Side guide one-sided and both-sided Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2010, Gathering element(s) Kolbus ZU 832.A Year: 2010 Description: - Number of elements: 1 - Number of gathering stations: 3 - ATC thickness control - Optical sheet control: Signalynx Maximum size: 460 x 320 mm Minimum size: 105 x 105 mm Max. mechanical speed: up to 8.000 cycles/h Blodpfxozhvn Rs Ahmjn

Condition: used, Year of construction: 2001, Transnorm belt conveyor belt conveyor 1300-700-600 gate passage RA2234 Technical data: Manufacturer: Transnorm Year of manufacture: 2001 Condition: good (used) Motor: fully functional conveying length (FL): 1300 mm Blsdjri Sndepfx Ahmsn nominal/outer width (NB): 700 mm 900 with barings and Motor belt width (GB): 600 mm overall height (BH): 85 mm motor height (MH): 450 mm Motor type: SEW geardrive, W20DT63L4 Motor power: kW 0,25 230/400 V 50Hz Conveying speed: contact us Scope of delivery: one support Optional: Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik