Used Frame Press, Sectional for sale (25,411)

Condition: excellent (used), Working length 250 cm Height 136 cm Width 60 cm Kodpjwgky Uofx Ahienc Pneumatic drives Electric lifting

Condition: excellent (used), Year of construction: 2018, Casolin frame press Kjdpfx Aozx R Slohionc Year of manufacture: 2018

Condition: used, Year of construction: 1988, usedmake Hesstype Hydro-Spezialyear of construction 1988cylinder horizontal 2working width 3550 mmworking height 2350 mmpressing depth 100 mmweight approx. 2000 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as seen,without guarantee and warranty Knjdpfevwfw Dox Ahioc

Condition: used, Year of construction: 2000, For fully automated assembly of frame components. Kedpjd H Irfjfx Ahisnc Frame outer dimensions: min. 120 x 120 mm max. 1050 x 2,500 mm 2 heating rails

Condition: used, Technical specifications: Kodpfxoyv Atro Ahienc Max. dimension of glued component: 1600 x 3000 mm 3 vertical presses 2 horizontal presses Hydraulic presses Power supply: 400 V Motor power: 1.5 kW Motor speed: 1450 rpm Overall dimensions: Length: 1200 mm Width: 3500 mm Height: 2500 mm

Condition: used, Technical specifications: Max. dimensions of the glued component: 2900 x 1900 mm 3 vertical clamps 2 horizontal clamps Ksdpozikz Ujfx Ahionc Hydraulic clamps Power supply: 400 V Motor power: 1.5 kW Motor speed: 1410 rpm Overall dimensions: Length: 3500 mm Width: 1000 mm Height: 2600 mm

Condition: used, Year of construction: 1989, Capacity: 80 ton Throat depth: 280 mm Ram stroke: 8 - 140 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 520 mm Table surface area : 850 x 670 mm Slide area: 550 x 400 mm Hole in table: 250 x 180 mm Number of strokes: 20 - 100 s.p.m. Required power: 7,5 kW Dimensions L x W x H: 2210 x 1510 x 2750 mm Ksdpjy Hqz Sjfx Ahisnc Oil volume: 50 l Die weight at the ram max.: 300 kg Weight of machine approx.: 8,3 ton

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition Kodpfek S Htxex Ahijnc

Condition: used, Frame press ORMA EUROPA Line voltage 380 V - 50 Hz Control voltage, magnetic components, lamp 110 V Knsdpfxswudzbj Ahijc Main protection 3 x 25 A

Condition: ready for operation (used), Year of construction: 1999, IMMEDIATELY AVAILABLE, chamber filter press from Häcker with base frame and 50 m3/h Abel pump, plate format 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake, content approx. 2700 liters, automatic. Plate transport, open outlet in filtrate trough on both sides, press is ready for use immediately after assembly, Abel pump was serviced by the manufacturer shortly before it was taken out of service, galvanized base frame with staircase, location is near Würzburg / Germany Knsdsrunu Iepfx Ahioc

Year of construction: 2005, condition: like new (used), Used Kojima 2200ton hydraulic H frame press for sale Machine Type Hydraulic Press Make Kojima Capacity 2200 tons Knsdjlqxg Hopfx Ahijc Stroke 1200 mm Daylight 1800 mm Slide 3200 x 1800 mm Moving Bolster 3200 x 1900 mm Moving Bolster Stroke 2500 mm Moving Bolster Speed 100 mm/sec Die Cushion 100 – 500 ton Cushion Stroke 450 mm Cushion Pad 2000 x 1275 mm Cushion Pin 50 mm dia Slide descending speed 235 mm/sec Hydraulic Tank 3200 litre

Condition: excellent (used), For sale: Hofer press in good working condition. Kodpfsx Rrw Nex Ahionc

Condition: new, Working width 3000 mm Working height 2000 mm Number of cylinders 5 St. S&S Frame Press, Type T 35 – CE Version ----- Working width: 3000 mm Working height: 2000 mm Manufacturer’s Technical Description: Item 1 00001931 S&S FRAME PRESS, Type T 35 Item 2 00003701 Medium-pressure beam with double-acting pressure cylinder, weight compensation, pressure hose, and shut-off valve, up to 2000 mm high Sturdy welded frame construction made of thick-walled special hollow sections; sliding carriage and pressure beam with 50 mm hole spacing. Continuous abutment on the left side for wide-span compaction; lower abutment in 2 levels. Vertical press cylinders mounted on special pressure beams with one-hand quick adjustment and weight compensation, height-adjustable in 50-mm hole spacing. Knedpfxjd Ih H Nj Ahisc Long sliding carriages ensure the long-term absorption of high pressing forces. Quick, smooth width adjustment via ball-bearing-mounted carriage with central locking, secured in 50-mm hole spacing. Upper horizontal press cylinder is infinitely height-adjustable and equipped with weight compensation. Lower horizontal press cylinder with centering holes for the two abutment levels, without weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm. Electro-hydraulically controlled machine, with 2 vertical pressure cylinders d = 60 mm, stroke 120 mm, double-acting, with weight compensation and one-hand quick adjustment, 2 horizontal pressure cylinders, d = 40 mm, stroke 120 mm, double-acting, with weight compensation; 2 manual control valves, pressure gauge, 1 pressure regulating valve from 20 to 130 bar, corresponding to 550 to 3,500 kg of vertical pressing force. Equipped with a 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Painted in RAL 7035 light gray with RAL 7016 anthracite gray. ----- Price of the above machine available upon request! ----- ----- Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment including a beveling device, counter profiles for single-part production, and much more! Request the complete price list from us! ----- (Technical data according to the manufacturer, subject to change; the illustration may show optional equipment!)

Condition: used, used Brand: Maweg Type: RPV Machine no.: 74019 Cylinders horizontal: 2 Cylinders vertical: 3 with weight compensation Cylinder stroke 100 mm Working width 3700 mm Working height 2480 mm Press depth 100 mm hydraulic Additions for small window sizes Space required approx. 4200 mm x 1350 mm x 2900 mm Weight approx. 1200 kg Total connected load 2.2 kW Ksdpowqg R Rsfx Ahienc Storage location 97447 Gerolzhofen, free loaded, unpacked Handover in as-is condition as inspected without guarantee and warranty

Condition: new, Year of construction: 2023, Press area: 3000 mm x 1800 mm Number of manual hydraulic cylinders, vertical: 4 Number of manual hydraulic cylinders, horizontal: 2 Ksdpfeiwfhwex Ahijnc Pressing force: 1500 kg Machine length: 4000 mm Machine width: 750 mm Machine height: 2250 mm

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 2,200 kg, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, reverse speed: 25 mm/s, total length: 1,400 mm, total width: 900 mm, total height: 2,150 mm, SPECIAL OFFER – 5% DISCOUNT! MTP C-FRAME HYDRAULIC PRESS – 1000 KN / 102 T Professional MTP hydraulic press with a pressing force of 1000 kN (approx. 102 t), designed for demanding industrial operations such as pressing, straightening, bending, assembly and forming of metal components. The open C-frame design provides excellent access to the working area and facilitates easy positioning of workpieces. The robust welded steel construction ensures high rigidity, stability and durability during operation. The hydraulic system provides smooth and precise ram movement. The machine is suitable for manufacturing plants, metalworking workshops, tool rooms, maintenance departments and the automotive industry. KEY FEATURES: • Pressing force: 1000 kN (approx. 102 t) • Open C-frame construction • Robust welded steel frame • Hydraulic drive system • Smooth ram operation • Large and easily accessible working area • Designed for industrial applications • Brand new machine • CE compliant TECHNICAL DATA: • Pressing force: 1000 kN (approx. 102 t) • Maximum working pressure: 25 MPa • Maximum opening: 600 mm • Ram stroke: 300 mm • Working table dimensions: 700 × 500 mm • Throat depth: 250 mm • Downward speed: 11 mm/s • Return speed: 25 mm/s • Motor power: 5.5 kW • Machine dimensions (L × W × H): 1400 × 900 × 2150 mm • Machine weight: 2200 kg APPLICATIONS: • Pressing and fitting operations • Straightening • Bending of metal components • Assembly work • Metal forming • Tool room and workshop operations • Industrial production Knodoyrr Rkspfx Ahiec • Maintenance operations TRANSPORT & WARRANTY The machine is brand new and covered by a 12-month warranty. We provide spare parts, warranty service and professional after-sales support. We can arrange professional transport throughout Europe using experienced industrial machinery carriers. The machine is properly secured for transport and can be delivered directly to the customer's specified address. We can also arrange international transport and shipment to countries outside the European Union. METAL TECHNICS POLSKA Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We provide technical advice, spare parts and comprehensive after-sales support. Contact us for the current price, machine availability, transport costs or an individual commercial offer.

Condition: good (used), 21-26- Hydraulic press KALLESOE (used) Workpiece length 2200 mm Workpiece height 1400 mm Vertical pistons Ø70mm Motor power 1.5 kW Made in Denmark Transport dimensions 2900x2500x900 mm Kodpsuctlnsfx Ahisnc Weight 500 kg Price 1250 Eur (EXW Jonava, Lithuania)

Condition: used, Single-column hydraulic press, DUNKES Type HZT 2.5 Machine No. H94-2558, Year of manufacture 1994 Clamping force 2.5 tons Overhang 180 mm Table surface 420 x 300 mm Through-hole in the table 60 x 185 mm Ram surface Ø 40 mm Dowel hole for clamping Ø 20 mm Ram stroke 160 mm Maximum installation height 250 mm Rapid traverse downward 65 mm/sec Rapid traverse upward 160 mm/sec Working speed 8.3 mm/sec Table height above floor 950 mm Hydraulic operating pressure 135 bar Hydraulic tank capacity approx. 100 liters Drive power 1.5 kW Power connection 400 volts, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and stroke limitation - 2-hand operation on the machine - Stroke counter - Safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion operations) - 32047 operating hours recorded - Electrical wiring diagram and hydraulic diagram available Knjdpfxeh Uhqyo Ahisc Space requirement L x W x H 1100 x 980 x 1950 mm Weight 700 kg Very good condition

Condition: used, Year of construction: 1990, used manufactured by Steton type SOPE built in 1990 cylinder horizontal 3 cylinder vertical 3 working width 3050 mm working height 2050 mm hydraulic required space ca. l x w x h mm 4100 x 1300 x 2600 weight ca. 1500 kg total connected power 2.2 kW Knedpfxevwfa Es Ahijc located in 97447 Gerolzhofen sale in current condition

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication Kedpfezrpt Uox Ahionc

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, Equipment: CE marking, TECHNICAL SPECIFICATIONS Maximum mounting hole dimensions: 3500 x 2500 mm Minimum mounting hole dimensions: 250 x 350 mm Vertical cylinders: 2 pcs, ø 65/40 mm, stroke 1300 mm Total lifting capacity of vertical cylinders: 7.4 tons Horizontal cylinders: 2 pcs, ø 50/30 mm, stroke 1500 mm Total lifting capacity of horizontal cylinders: 2 tons Hydraulic unit 1.5 kW *The maximum size of the workpiece will be smaller than the maximum operating range of the press, depending on the type of joint (dovetail or pin) and the method of positioning the workpiece in the machine (pre-assembled or unassembled). PRESS DESCRIPTION • 3 positions for the lower beam • Pressure is adjusted directly from the hydraulic unit using a knob; the current pressure is displayed on an indicator during operation. • All electrical components are manufactured in accordance with European standards; each component has a code corresponding to the marking on the electrical diagram. • Hydraulic unit with a pump in an oil bath for better noise reduction and lubrication. A 1.5 kW motor is installed on the oil tank. • The rack and pinion system allows for precise movement of the upper beam. • The supporting structure is made of welded iron elements, Fe 430 grade. • Control panel: - Button for vertical movement of the beam - Button for vertical clamping - Button for opening the horizontal clamping corners Kedpfx Ahsznv A Ueisnc - Button for horizontal clamping of the corners - Additional button for two-handed activation of the press functions Warranty: 12 months on spare parts

Condition: good (used), Tranklein BP bookbinding press for pad/block pressing The machine is in very good condition, fully functional, and ready for production. Knodpfez S Utljx Ahijc Power supply: 380V. Fast operation. Hydraulic power unit. Format: 340 x 260 mm. Stack height: 820 mm. Adjustable pressing force, max. 2500 kg. Weight: 250 kg. Mounted on casters for easy movement.

Condition: reconditioned (used), Year of construction: 2014, Working width 4000 mm Working height 2550 mm Number of cylinders 6 St. Dimensions (L/W/H) 5.000 x 1.200 x 2.900 mm loading dimensions L x W x H 5.000 x 1.200 x 2.900 mm S+S Bavaria 2000 L window frame and sash press Knsdpezpblkjfx Ahiec The press was partially reconditioned at our warehouse, immediately available! Technical specifications: - Working dimensions: 4000 mm x 2550 mm (length x height) - Abutment and pressure plate depth: 100 mm - Automatic press cycle for "mortise and tenon" corner joints - hand control for manual pressing mode - 1 central pressure beam (accommodates heights up to 2550* mm) - 1 transverse pressure unit - 1 shut-off valve for the 3rd vertical cylinder - 1 shut-off valve for the upper horizontal cylinder - 3 controls for angled window processing (vertical cylinders) - 3 attachable pivoting pressure plates for pressing angles up to 60 degrees - 2 extensions for pivoting pressure plates (for triangular/pointed windows) - Surcharge for minimum dimensions - All pressure plates and abutments faced with plastic - Control cabinet located on the inside of the left base leg - Press can be completely disassembled if required (price on request!) - Finish: RAL 7035 Light Grey and RAL 7016 Anthracite Grey (Technical specifications provided by the manufacturer – subject to change/no guarantee)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2001 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, Soprem powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2001 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control Soprem RMI 50 F1 Powered Auto/Manual Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, Soprem RMI 50 F1 powered automatic/manual decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Adjustable Stroke: 7–100 mm Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Variable Stroke Rate: Approx. 68–203 strokes/min Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Kjdoz Irbqepfx Ahisnc Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. Soprem RMI 50 F1 Powered Decoiler – 1992 Powered coil decoiler with automatic/manual operation, suitable for supplying strip material to the press for coil-fed production. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring Soprem powered automatic/manual decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Condition Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.

Condition: used, Schließrahmen - Frame SBB Letter Press HeidelbergSBB - 560 x 820mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Kodpfxorffm Ne Ahienc