Used Kuhn Hay Technology for sale (26,027)

Condition: good (used), functionality: fully functional, Pfeiffer Vacuum Technology AG Turbo Molecular Pump with MAGPOWER Controller, Q2662100, ATH 2300M Model: Q2662100 Type: ATH2300M Condition: Used Kdodpfxezh I I Ne Akwjt Technical Data: ATH-M 200–240V AC 50/60Hz General: Magnetically levitated turbo molecular pump Water cooling Magnetic bearing (Maglev), oil-free Speed: 39,000 min⁻¹ Pumping speed N₂: approx. 1,600 l/s Ultimate pressure: < 6 × 10⁻⁹ mbar Motor: 40 Vrms, 1033 Hz, 12 Arms Inlet flange: DN200 ISO-F Outlet flange: DN 40 ISO-KF External electronics (Magpower) Adixen by Pfeiffer Vacuum Controller MAGPOWER S12A P/N: 120917 Rev. G Vi: V2.10.00 / Vn: V2.08.00 Vv: V2.10.00 Vm: V3.11 Accessories: Pfeiffer/Adixen pump cable A215300 - Pump-2-MAGPOWER cable for connection between turbo molecular pumps and control units Power cord: Hubbell HBL4770C (NEMA L7-15P, 277 V / 15 A) Remote control / I/O cable (DB25) Note on item condition: Gases passed: NF₃/N₂

Condition: used, Year of construction: 2023, _____For sale on behalf of a customer: Cultimer 500 R, manufactured in 2023, working width 5m, working depth 5-35 cm, transport width 3.0m, number of tines 16, number of leveling discs 16, NSM stone protection system, mounting category III and IV, HD liner roller with hydraulic height adjustment, wing shares, minimum power requirement 300 hp, location: null. Ksdpjzdmumofx Akwedt

Year of construction: 1997, condition: used, machine/vehicle number: 5673, Directly driven vibratory feeder. The machine is equipped with two interchangeable screening decks, which are pneumatically tensioned/clamped. Below each deck is a separate discharge chute. Kdedpszmfytofx Akwst Drive: 2x unbalanced motor, 230 / 400 V, 50 Hz Width (internal vibrating trough): 1,200 mm Length (functional vibrating trough): 4,750 mm Material: Stainless steel

Year of construction: 1991, condition: used, machine/vehicle number: 8984, Directly driven vibrating screen, equipped with 3 levels: - Upper level: 5 removable perforated sorting screens with a discharge chute for the oversize fraction on the right side. - Middle level: 5 removable perforated sorting screens with a discharge chute for the oversize fraction on the left side. - Lower level: a closed collection screen for the fine fraction that passes through all sorting stages, with discharge via an outlet at the bottom. Includes 20 extra screens (a total of 30 screens with different perforations). Drive: 2 x unbalanced drive, 220 / 380 V, 50 Hz Width (pan internal): 1,000 mm Ksdpfx Akszmf Taswedt Length (pan internal functional): 3,500 mm Material: Stainless steel

Year of construction: 2026, operating hours: 100 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: FL80, High frequency welding machine Revised and tested 2026 Arm 80cm Single electrode 20x900mm Plexiglass hand guard protection Power 12KW Absorption 15KVA Kjdpfx Aey Dtz Aokwjdt Control panel on movable external arm ITL9-1 triode tested and working 12 months warranty

Year of construction: 2025, operating hours: 10 h, condition: new, functionality: fully functional, machine/vehicle number: 90300934, CLC 600 Docter machine Kdedpsy D H Rdefx Akwjt Unwind 600 mm Rewind 600 mm

Year of construction: 2014, condition: good (used), power: 260 kW (353.50 HP), color: yellow, machine/vehicle number: 214034, Painting-drying booth with semi-vertical air flow "ITALO-1-SV", brand Lackro, manufacturer Eco-Air Technology S.R.L. Italia, year of manufacture: 2014 Cabin interior dimensions: length 14.06 m X width 5.04 m X height 4 m, maximum air flow: 40-45000 mc/h, thermal power: 260 Kw, fuel: diesel, installed electric power: 26 Kw three-phase, tank fuel included, the cabin has a special lighting system, 30 superior filter cells for purification with carbon, dimensions: 500x500x50 mm, side service door, two central hinged doors, trolley for parts, burner chimney on diesel, the cabin has the user and maintenance manual Attention customers: this cabin will be delivered disassembled and loaded for transport from our company headquarters in Oradea. Industrial drying painting cabin "ITALO-I-SV" MOD. ECO – L=14,060 mm x w=5,040 mm x H=4,000 mm with semi-vertical air flow Suction group Suction and filtration unit ECO-SM-5 Maximum air flow at 250 Pa m3/h 40,000-45,000 Maximum thermal power kW 260 VATRA 232 Fuel type DIESEL Installed three-phase electric power: kW (2x7.5) +(2x5.5) Filter cells 500 mm x 500 mm x 500 mm 30 pieces Bag filter Ǿ 280 x 1000 mm pieces 10 Ceiling grid 975 x 1855 mm 28 pieces Generator pre filters 1,000 mm x 800 mm x 50 mm pieces 2 Andreae suction wall filter 0.9 m x 5 m pieces 3 The maximum size of the piece in the cabin L=12 m x w=3 m x H= 3.2 m For any details, do not hesitate to contact me by phone. Price 79.900 Euro + VAT, Ex Works Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana Kdjdpsp S Tlhofx Akwot

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: BR-BTRS-100-250003, As-new Brinkmann Technology BTRS100 screw conveyor, year of manufacture 2025, equipped with control unit, flushing valves, adapter pieces, adjustable motor power, and Easy-Clean cleaning package. We have only tested the screw conveyor. Due to a change in technology, it has never been put into operation. Ksdpfxsytql Ns Akwsdt Manufacturer: Brinkmann Technology GmbH Year: 2025 Type/Model: BTRS100 Designation: BTPS100 pipe screw conveyor Serial number: BR-BTRS-100-250003 Power: 1.5 kW Original price: €13,000 (net) Further documents (technical drawings, operating manual, invoice, etc.) available upon request. If you have any questions or require more information, feel free to send us a message or call us.

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, Crumbler HB KRU 6 Length and diameter of crumb roll: 1740 x Ø 250 mm Engine: 7.5 and 11 kW Kjdora Dn Sepfx Akwodt Weight: 2100kg

Condition: used, Applicable material: Hay Kodjzgw Amopfx Akwodt

Year of construction: 2005, condition: used, Tablet dedusting unit Brand: Pharma technology Model: 1200 S Kedpfx Akex Rz Iwjwjdt Conveyor speed: adjustable Elevation height: 1200 mm Power supply: 230 V Control module: metal detection Brand: Safeline Model: Tab/ex Year : 2005 Power supply: 230 V Ejector valve for non-conforming products.

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, For industrial sale, a fully automated saw for cutting lumber packages and structural elements – a complete technological line for formatting packages to a specified length. The device is designed for use in sawmills and wooden structure manufacturing plants, where process efficiency, consistent cutting length, and package stabilization during cutting are crucial. Inspection and testing are possible at Delfina 20, 98-354 Siemkowice, POLAND. Operating parameters: • Max. package: 1300 × 1300 mm (width / height) • Max. input package length: 6000 mm • Max. cutting length: 3000 mm • Min. cutting length: 600 mm • Max. package weight: 8000 kg • Cutting accuracy: ±2 mm The minimum package cross-section is determined by the extreme position of the hydraulic clamps – cutting packages with smaller dimensions is permissible. Cutting module: • Main motor 11 kW • HIWIN linear guides with increased load capacity • GB TITANIUM guide + STIHL chain • Automatic guide lubrication system The rigid construction of the unit ensures stable operation and consistent cutting length. Package stabilization: • System of 6 hydraulic clamps (top + side + front and behind the cutting line) • Package support on vertical rollers • Elimination of package movement during saw entry Process automation: • Intelligent package strapping system • Automatic determination of strapping locations • Option for automatic initial cutting • Buffer for cut packages Transport and handling: • Transverse loading conveyor • Transverse unloading conveyor • Automatic package pickup after cutting Kedpfx Ajxn Rt Uskwsdt Waste removal: • Belt conveyor for waste (~10 m) • Hydraulic tilting rollers of the cutting module (protection against large waste jamming) Automation: • Siemens PLC controller • Yaskawa servo drive and inverters • 21–22” operator panel • Remote service and diagnostics Additionally: • Winter package – heating of the control system • Transport to the customer – included in the price • Installation – included in the price • Commissioning – included in the price • Operator training – included in the price

Condition: used, Year of construction: 2005, SPACESACER SS2101 rod feeder year 2005 Kdsdpfjwcgdnsx Akwst used - efficient

Condition: used, Applicable material: Hay Ksdpfx Akey Ta Axowedt Working width: 730 cm

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 700 kg, total length: 900 mm, total width: 2,100 mm, total height: 2,200 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 5 bar, electrical fuse: 20 A, The Ring Tester is engineered for automated crack detection on ring-shaped components, such as bearing races and gears, utilizing the eddyvisor C. In addition to crack testing, customers can inspect for grinding burn on the inner and outer rings of roller bearings. For this purpose, a robot manipulates and guides the sensor precisely along the contours of the test part. Kodpfoyx E D Ejx Akwsdt Testing is conducted using up to two probes. All relevant scanning parameters and communication protocols for controlling the eddyvisor C are integrated into the robot scanning program. At the heart of the system is the eddyvisor C, a two-channel eddy current instrument, ensuring highly reliable detection of cracks and grinding burns. Process automation is achieved by an integrated Stäubli TX2-60 robot. The entire system is managed and operated via a control cabinet equipped with an integrated control and operating panel. A vertical spindle with chuck reliably clamps each test component during the inspection process. Non-conforming (NOK) parts identified during testing are automatically discharged to one of two designated NOK storage conveyors. Separate storage locations for reference and master parts facilitate calibration and ongoing quality assurance during operation. The system also incorporates the ibg Optical Reflection Sensor (iORS), enabling precise, non-contact inspection of rings.

Condition: as good as new (ex-display), functionality: fully functional, The ibg Ring Tester Large is engineered for automated crack inspection of bearing inner and outer rings with diameters ranging from 45 to 100 mm. The system conducts a structural analysis, followed by a line-scan inspection of the raceways as well as the inner and outer diameters, utilizing the eddyvisor C. After inspection, components are automatically classified and sorted as either OK or NOK. The testing unit is mounted on a durable metal frame designed for industrial manufacturing settings, featuring integrated compartments for the steel enclosures that house the measuring equipment and PLC (including Siemens PLC). Clean, upright components are separated, fed into a transport wheel, and accelerated into rotation via belts. At the inspection station, adjustable rollers provide lateral fixation while probes perform surface defect detection; thereafter, components are automatically sorted into OK and NOK. Prior to testing, rings must be free of particles and residual liquids. The system follows ibg’s good-part-only policy, with NOK samples reserved exclusively for checking detection sensitivity during test runs. Infeed height: 1550 mm; discharge height: 1220 mm. Kedpsy H Dkaefx Akwedt For further information, please visit our website.

Year of construction: 2018, operating hours: 7,000 h, condition: used, functionality: fully functional, We are offering this used Himel / Gama control cabinet for a pellet press and pellet system for straw / hay / alfalfa, manufactured in 2018. It has approximately 7,000 operating hours. The hourly output, depending on the biomass, is 700 - 1200 kg, according to the manufacturer. We also have a separate press with 90 kW available for €95,000; it has approximately 500 operating hours and was manufactured in 2025. Type: Control cabinet for pellet press Number: 20182138 Year of manufacture: 2018 Power supply: TNC-S 400V AC/N/PE Frequency: 50 Hz Power: 195 kW Max. current consumption: 375 A Ksdpfxozrvh Es Akwedt If you have any questions or need more information, please send us a message or call us.

Year of construction: 2014, condition: ready for operation (used), functionality: fully functional, Q-Fin F200 deburring and grinding machine with conveyor belt For sale: Q-Fin F200 deburring and grinding machine for professional surface treatment, equipped with a conveyor belt. This compact industrial machine is suitable for the efficient post-processing of metal parts. Ideal for deburring, grinding, and improving the surface of workpieces after, for example, sawing, milling, laser cutting, or other machining operations. The machine was used in our production process and is being offered for sale due to the cessation of our business activities. Machine details: Brand: Q-Fin Type: F200 Deburring and grinding machine For surface treatment of metal parts Equipped with a conveyor belt Suitable for series production Compact industrial design Year of construction: 2014 (second owner) Includes: grinding media / accessories Optional: Dust extraction system (at an additional cost - year of construction 2021) The conveyor belt enables efficient and consistent product flow, making the machine very suitable for the rapid and reproducible post-processing of larger quantities of parts. The machine is currently still installed and can be viewed in working condition by appointment. Kedez A A E Aepfx Akwedt If you are seriously interested, please do not hesitate to contact us. Additional photos, videos, and technical information are available upon request.

Year of construction: 2012, condition: used, 3 cylindroconical fermentation and storage tanks with frame and cone cooling Additional title: 3 pieces, with frame and cone cooling Total volume: 3000 l Pressure capacity: 3 bar Length: 1860 mm Width: 1860 mm Height: 3700 mm Material: stainless steel Kdjdpfx Asxwy Tpskwet Base construction: standing on feet Features: frame and cone cooling, sampling tap, DN50 connection; panel with valves;

Condition: new, Year of construction: 2026, operating hours: 10 h, machine/vehicle number: Parmel_06202P&C, type of input current: three-phase, total width: 2,200 mm, input voltage: 400 V, working width: 1,600 mm, YORK Single-Sheet Cradle / Feeder The YORK single-sheet cradle features a top-twist material feeding system that allows the material to enter the automatic cutter directly, ensuring a continuous and efficient production flow. Kjdpfjyh R Htjx Akwodt Precision and Technology The YORK single-sheet cradle/ feeder is equipped with a full-color multilingual touchscreen control panel and dedicated control software for accurate and intuitive operation. The system can be electronically synchronized with virtually any automatic cutting machine, providing precise feeding control, reliable performance, and seamless integration into automated production lines.

Condition: used, functionality: fully functional, Fully automatic bagging system – completely dismantled and ready for collection For sale is a fully automatic bagging system, suitable for a wide range of bulk materials such as flour, pellets, and granulates. The system impresses with its high degree of automation and robust industrial design. Features and components: - Pneumatic bagging unit - Fully automatic sewing machine for sealing the bags - Rollers for flattening filled bags - Roller conveyors for in-plant transport Kdedpfx Aoyw Rffokwet - Robotic arm for automatic palletizing of the bags - Automatic pallet magazine - All electrical cables and control cabinets have been professionally dismantled The entire system has already been dismantled, neatly stored on pallets, and is ready for immediate collection. Comprehensive electrical documentation with schematics is available. Special features: Ideal for industrial applications with high throughput and automated processes. All components are perfectly coordinated, ensuring an efficient packaging and palletizing process. If interested or for further information, we are happy to assist you.

Condition: used, Year of construction: 2006, PTO shaft hydr. contact pressure control / Kdedjtp I Ilspfx Akwot

Condition: used, Year of construction: 2006, PTO shaft hydr. cutter bar relief hydr. swivel / Kdodpfx Aketp I Ihswjt

Condition: new, Year of construction: 2025, overall weight: 150,000 kg, We offer Lines for shredding and separating non-ferrous metals and copper cables. The line can be freely modified according to the customer's needs. The attached visualization is illustrative. Machines included in the line: Drum Belt Magnetic Separator Multi-shaft shredder 2 x 18.5 kW MCW-110 1. Loading conveyor (controlled automatically by shredder, according to load) Technical data: - L – 4000mm -Working width – 720mm - Height – 2100mm - Geared motor – 1.5kW - PVC conveyor belt equipped with straight cleats. - Steel structure, placed on self-adjusting wheels 2. Unloading conveyor (receives the shredded material for further process) Technical data: -L. – 3600mm - Working width - 400mm - H – 2000mm - Geared motor – 1.1kW - PVC conveyor belt equipped with a sealing wave and straight cleats - Structure made of acid-resistant steel, placed on self-casting wheels 3. Magnetic separator – (automatically separates unwanted steel elements from the belt of the unloading conveyor) Technical date: - L – 1400mm - Working width – 380mm - Height – 300mm - Geared motor – 0.55kW - Structure made of acid-resistant steel - PVC conveyor belt equipped with straight cleats - Magnetic plate made of permanent magnets 4. Magnetic plate with quick-cleaning overlay – (separates very small steel elements) Technical date: Ksdpfx Aksv I Shdowodt - W – 490mm - L – 330mm -H- 80mm - Housing made of acid-resistant steel Vibrating feeder PWR-1000 Eddy Current Separator WPS-1000 Discharge conveyor no. 2 of the WPS-1000 separator . Horizontal shredder RKZ-1200 Dust extraction DUST EATER OPW-400 GoldRiver SWZ-700 Water Separator Automatic plastic receiver Automatic metal vibration receiver.

Year of construction: 2026, operating hours: 3 h, condition: new, WPS-1000 Eddy Current Separator with Magnetic Separator and Vibrating Table We offer a complete set for the separation of ferrous and non-ferrous metals from bulk materials, designed for professional installations and recycling lines. Kdodpfxozzn Aaj Akwjt The set consists of: WPS-1000 eddy current separator, vibrating table, belt-type magnetic separator with a magnetic drum. The system enables uniform material feeding, removal of ferrous metals, and subsequent separation of non-ferrous metals, such as aluminum, copper, and brass. WPS-1000 Eddy Current Separator The separator is designed for the automatic separation of non-ferrous metals from a material stream transported on a belt. A high-speed rotor equipped with NdFeB magnets generates a variable magnetic field. The eddy currents generated in the non-ferrous metals cause them to be rejected from their natural trajectory, separating them from the remaining material. Technical data: magnetic rotor length: 1000 mm magnets: NdFeB rotor motor: 7.5 kW belt motor: 1.5 kW smooth rotor speed control smooth belt speed control PVC belt with sealing flange adjustable separation baffle enclosed construction control cabinet with IP55 safety system device color selectable Vibrating Table + Magnetic Separator The vibrating table is responsible for the uniform distribution of the material before further separation. Then, the material is fed onto a conveyor equipped with a powerful magnetic drum, which removes ferrous metals before the material is fed into the WPS-1000. Technical data: vibrating table width: approx. 1000 mm vibration drive: 2 × approx. 0.8 kW magnetic drum width: approx. 1100 mm magnetic strength: up to approx. 12,000 Gauss magnetic roller diameter: approx. 200 mm belt drive motor: approx. 1.1 kW reinforced PVC belt partially stainless steel construction Application The set can be used, among other things, for processing: mixed scrap, electrical and electronic waste, plastics containing metals, shredded cables and wires, fractions after shredding, other materials containing ferrous and non-ferrous metals. Separation process: vibrating table → separation of ferrous metals → eddy current separator → separation of non-ferrous metals. The devices can operate as a complete set or be integrated into an existing technological line.