Used Omron E3S-Ad12 for sale (227)

Condition: new, Siemens 6FC5303-0AF50-0CA0 Display OP 022-555 Ergoline 3 SN LBL8537714, unused, 100% functional, scope of delivery as per photos Giodpjx Eutcsfx Alxot

Condition: new, Siemens 6FC5303-0AF50-0CA0 Display OP 022-555 Ergoline 3 SN LBL8537719, unused, 100% functional, scope of delivery as per photos. Godox Dxa Ispfx Alxsit

Condition: new, Siemens 6FC5303-0AF50-0CA0 display OP 022-555 Ergoline 3 SN T-K86256051, unused, 100% functional, delivery contents as per photos. Gjdex Dxa Uopfx Alxsit

Condition: new, empty load weight: 895 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,500 mm, loading space width: 1,780 mm, color: silver, load capacity: 2,460 kg, Technical Data Unladen weight: 895 kg (without side panels) Payload: 2.60 t (without side panels) Ramps: 2 units Trailer floor, smooth steel: yes Side panels mm 355 x 178 x 70: yes Spare wheel: not included Gjdeyqzafjpfx Alxeit Approval: 80 km/h (approval for 100 km/h possible) Vehicle registration document: available Manufacturer’s warranty: 12 months

Condition: used, mileage: 47 km, power: 85 kW (115.57 HP), first registration: 11/2025, fuel type: electric, maximum load weight: 815 kg, overall weight: 4,250 kg, axle configuration: 4x2, wheelbase: 2,800 mm, color: other, driver cabin: day cab, gearing type: other, emission class: euro6, suspension: other, Year of construction: 2020, This offer is non-binding. Errors and prior sale excepted. If a foreign currency is indicated, it will be calculated at the current daily exchange rate. The currency of the vehicle location is valid. Drive configuration: 4x2, single cab, payload 2 t, gross vehicle weight up to 6 t, wheelbase 2800 mm, heated exterior mirrors, reversing alarm, driver and passenger airbags, radio with Bluetooth, technically max permitted GVW 6000 kg, current registration GVW 4150 kg, up to 4250 kg as a BEV transporter can be driven with a category B driver’s license (observe requirements!!) Giedpfex Hbqdsx Alxst

Condition: used, mileage: 47 km, power: 85 kW (115.57 HP), first registration: 11/2025, fuel type: electric, maximum load weight: 815 kg, overall weight: 4,250 kg, axle configuration: 4x2, wheelbase: 2,800 mm, color: other, driver cabin: day cab, gearing type: other, emission class: euro6, suspension: other, Year of construction: 2020, This offer is non-binding. Subject to errors and prior sale. If a foreign currency is stated, the current daily exchange rate applies. The valid currency is that of the vehicle's location. Wheel configuration 4x2, single cab, payload 2 t, GVW up to 6 t, wheelbase 2800 mm, heated mirrors, reversing warning system, airbags for driver and passenger, radio with Bluetooth, technical maximum permissible GVW 6000 kg, current registration GVW 4150 kg, up to 4250 kg as a BEV transporter can be operated with a category B driving license (please observe requirements!!). Gijdpfx Aex Hbp Tolxjt

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning diameter: 250 mm, turning length: 400 mm, controller model: Siemens 840 D, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning diameter: 250 mm Turning length: 400 mm Control: Siemens 840 D MACHINE DETAILS Total power requirement: 45 kW Godpfx Aljwmn Ezexoit Machine weight approx.: 17 t Space requirement approx.: 7.0 x 5.0 x 3.2 m

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder with E3 infeed and A3 outfeed mechanisation Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure Weinig E3 moulder infeed +pack scissors lift (3000kg). Weinig A3 drop leaf outfeed + pack scissors lift (3000kg) + pack outfeed chain conveyor. WEINIG HYDROMAT 1000 230X160mm maximum dimension No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Gedpfx Asy Sgzxolxjit Beam 0.55kW Full documentation included. Extraction manifold included. POSSIBLE TO PURCHASE MOULDER OR MECHANISATION SEPARATELY AS NEEDED

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 300 h, power: 30 kW (40.79 HP), type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,100 mm, number of axes: 3, number of slots in tool magazine: 12, actuation type: pneumatic, overall weight: 2,500 kg, Technical Data Sheet: Detailed Configuration - Working area: 2100 x 3000 x 250 mm (effective working surface). - Spindle: HQD 9.0 kW ATC, air-cooled, 18,000 rpm, ISO30 tool holder. - Drilling unit: HQD block with 9 vertical drills. - Inverter: Fuling 11.0 kW. - Control system: Taiwan SYNTEC 6MB controller (widely used for ATC) with remote handwheel. - Motors & drivers: YASKAWA 850W servomotors and 1000W drivers for X and Y axes. The Z axis features a braking function. - Tool magazine: 12-position carousel design, automatic tool change in 8 seconds. - Table: Vacuum working table. Godpfx Asy Iy Anolxjit - Linear guides: Taiwan PMI No. 25 guides (high precision, smooth transmission, long service life). - X, Y transmission: Helical rack, 1.5M, high load capacity. - Gear reducers: Japanese Shimpo reducers for X, Y, and Z axes (higher speed). - Z transmission: Taiwan TBI ball screw (high precision). - Tool sensor: Automatic tool sensor calibration for setting the Z-zero point. - Lubrication system: Automatic lubrication system, 1.5L (programmable for time and volume). - Limit switches: OMRON (Japan) sensors for X, Y, Z axes. - Electrical components: Schneider Electric components (France). - Electrical wiring: Flexible shielded cables with copper wires (static protection), Igus brand (Germany). - Machine frame: Robust, thick welded steel tube base frame. - Vacuum pump: 7.5 kW air-cooled vacuum pump set (high suction power). - Dust collector: 4 kW double-bag extractor. - Loading platform: Complete automatic loading and unloading kit for 2130 format. - Air compressor: 2 x 7.5 kW with air dryer, filter, oil-water separator, and tank. - Pop-up pins: Retractable stops (for quick and repeatable positioning).

Condition: new, Bauer E3-20/DO 56-170 B gear motor SN:221314-3 with E 003 B brake, terminal box cover missing see photo, unused, 100% functional, scope of delivery as per photos Gjdpfx Asi D E Dgelxoit

Condition: ready for operation (used), Year of construction: 2023, clamping force: 2,500 kN, screw diameter: 55 mm, overall weight: 8,400 kg, Hydraulic injection moulding machine manufactured in 2023. This HAITIAN MA 2500 III features a clamping force of 250 tons and a platen size of 850 x 850 mm. The machine includes an impressive injection pressure of 1850 bar and a screw diameter of 55 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN MA 2500 III machine we have for sale. Contact us for further details regarding this machine. • Clamping unit • Opening force: 165 kN • Platen size: 850 x 850 mm • Opening stroke: 540 mm • Tie bar distance: 580 x 580 mm • Max mould height: 580 mm • Min mould height: 220 mm • Ejector stroke: 150 mm • Ejector force: 62 kN • Min mould dimensions: 410 x 410 mm • Injection unit • Euromap classification: 1000 • L/D ratio: 20 • Shot volume: 570 cm³ • Effective injection volume: 519 g • Injection rate: 281 g/s • Plasticizing capacity: 47.7 g/s • Injection pressure: 1850 bar • Screw speed: 180 rpm • Screw stroke: 240 mm • Carriage force: 99 kN • Pump motor power: 37 kW Gsdpfx Aley N Sqmjxoit • Heater power: 21.45 kW • Oil tank capacity: 340 L • Dimensions • Machine size: 6.19 x 1.60 x 2.42 m • Control • Controller: KEBA 2985 – CP053 • Features: • 15” colour touchscreen • Euromap 67 robot interface • USB memory • 200 mould memory • Cycle history • Alarm tower • RFID login/password • Multilanguage interface • Process graphs • Maintenance pages • Metric / imperial selectable • Included options / extras (machine-integrated) • Bimetallic screw + barrel • Masterbatch dosing interface • Hydraulic radial extraction • Festo air blow system • 12-zone PSG central lubrication • 4-way flowmeter • Robot interface • Included screw H 3 zones • CE certified work cell Additional equipment • Robot included: HILECTRO V-1300ID Cartesian Robot (2023) • Type: 3-axis servo Cartesian robot • Suitable for: 380T to 530T presses • Travels: X 2000 mm / Y 880 mm / Z 1300 mm • Max extractable weight: 12 kg • Power: 400 VAC / 50-60 Hz • Precision: 0.1 mm • Robot weight: 530 kg • Included: Touchscreen controller, USB programs, pneumatic gripper, vacuum cups, conveyor ready • Peripherals included: FORMAX E3 Monofase Hopper Loader (2 units) • Hopper capacity: 3.0 L • Power: 1150 W • Inlet diameter: 40 mm • Capacity: 70 kg/h • Voltage: 230 V • Weight: 13 kg each

Condition: used, Year of construction: 2000, (1) Injection molding machine, handling: Arburg | Multilift H with B-axis | 2000 Temperature control: HB Therm | HB-160 Z1 | 2012 Miscellaneous: 1x Handling System 1x Conveyor Belt (integrated into the injection molding machine) 1x Conveyor Unit, Motan 1x Packaging cell with: Robot, Yaskawa GP-7 Camera system, Omron Conveyor belt, Robotunits Technical Details: Operating voltage: 400 V Frequency (Hz): 50 Control voltage 1: 230 V Control voltage 2: 24 V Giedpfx Asy N Saujlxet Motor/Heating rated current (A): 200.0 / 93.0 Total connected load (kW): 42.0

Condition: used, Used Wine Filling Line 2000 Complete line for still wine filling, consisting of the following machines: Used Depalletizer Automatic depalletizer branded Oma model Depalblock 2000 built in 2002. It reaches speeds of 6000 BPH for the 0.75 lt format. In addition to that it works formats such as bottles of 0.375 – 0.75 and 1.50. This used depalletizer is supplied with all its accident prevention protections and also the user manuals. The loading is carried out from above and there is neither an interlayer removal system nor a pallet magazine. Instead, there are spare parts available. Measurements: Length: 2950 mm Width: 2133 mm Height: 2530 mm Weight: 1550 kg. Volt consumption: 380 Kw: 2 Hz: 50 Used Filling Monoblock of this Used Wine Filling Line The manufacturer of this monoblock is Ave Impianti, and it is an Oceanic 16-16-4 model. It works with the same formats from 0.375 – 0.750 – 1.500 at a speed of 3800 BPH. The direction of rotation is clockwise, and the state is currently in production. This machine is currently used for filling still wine. This machine includes also a rinsing machine that has 16 forceps and does 2 treatments. Then follows the 16-valve filler with a fixed nozzle. Finally, there is the 4-head cork stopper that can process a diameter of up to 26 mm. There are several spare parts for this machine. Measurements: Length: 4600mm Width: 2300mm Height: 3400mm Consumption Volt: 380 Hz: 50 Used Capper The used Capper is Bertolaso branded and the model is Alfa 110 Inox from 1995 with 1 head. Clockwise rotation direction, is always complete with all available manual and accident prevention protections. The operational status is currently in production and the type of container handled is 0.75 liter Bordolese. The cap type is Stelvin and the size is 30×60, while the neck type is standard. Gjdpovguttsfx Alxoit Measurements: Length: 800mm Width: 900mm Height: 2600mm Volt consumption: 380 Used Capsuler This machine is branded Robino and Galandrino model Fenix 2 of the year 2000. It is a used capsuler with 2 heads and the speed reached is 6000 BPH with the following formats: 0.375 – 0.750 – 1.500. There are safety protections and manuals are also available with the necessary instructions. The state is currently in production. The specific product treated is still wine. The types of capsules used are the Enoterms in Polylaminate. Weight: approx. 1800 kg Consumption Volt: 380 Kw: 4.5 Hz: 50 Used Labeling Machine of this Used Wine Filling Line Branded Kosme Model Extra Fix 8T S3 E3 + S2 E2 Adhesives year 2005. Speed of 3000 BPH on the treated formats of 0.375 – 0.750 – 1.500 L. Machine currently in production in the line with its accident prevention protections and user manuals available.

Condition: refurbished (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 350 mm, workpiece weight (max.): 50 kg, warranty duration: 12 months, total height: 1,950 mm, type of input current: AC, total width: 1,900 mm, total length: 2,020 mm, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 350 mm, overall weight: 5,800 kg, input voltage: 230 V, compressed air connection: 6 bar, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Reference Measuring Device Mahr OMS 1000 Multisensor The all-round measuring device for the broadest range of components or pallet measurements Factory-refurbished premium multisensor measuring center with warranty, rebuilt in 2025. INCLUDES latest software update, 18 months of free software update service, free lifetime software hotline and user support. Delivery with factory service or freight forwarding, worldwide. Online or on-site demonstrations with customer parts available, application-specific consultation by accredited Profitech metrology laboratories during project planning. Full service possible: – Delivery, installation, commissioning, accuracy acceptance according to standards, certification, and comprehensive acceptance documentation. Customized training and education programs also available as online courses. Rental, hire-purchase, or financing possible directly through Profitech and without a financial institution. Measuring device can be configured individually to customer requirements. Measurement accuracy: E1 = 1.3 + L / 400µm E2 = 0.9 + L / 600µm E3 = 2.2 + L / 300µm Measuring range: approx. 1000 x 1000 x 350 mm Includes optical sensor (camera & laser) Renishaw TP200 probe system incl. Standard Force Module CNC control incl. hand control panel 27-inch flatscreen monitor Evaluation station incl. Windows 10 operating system (Windows 11 available on request) New Opticheck 3D 5.0 software Active vibration damping (pneumatic) suitable for production-related measurements Optical sensor: • Pure grayscale image processing • Fast, digital image processor • Automatic feature and edge filter • Error documentation via program-controlled video image storage Gjdsxbpgtepfx Alxeit • Multifunctional multi-window technology • White telecentric transmitted light • Coaxial reflected light • 3D multi-sensor head Laser Sensor: Laser preparation for laser autofocus. Software-controlled intensity regulation for adaptation to different materials. Software: • Full version WITHOUT subscription model or maintenance contract • User-friendly, interactive programming • Symbolic representation of the program structure • Multitasking enables parallel measuring and evaluation • Powerful basic editor for customer-specific programs • Automatic sensor calibration • Geometry elements: point, line, circle (envelope, best-fit and circumscribed circle), ellipse, plane, cylinder, cone, sphere • Geometry functions: intersection, distance, angle, perpendicular, symmetry • Form & position tolerances: straightness, roundness, flatness, cylindricity, parallelism, perpendicularity, inclination, position, symmetry, concentricity, run-out, total run-out, flatness run-out, total flatness run-out • Maximum material condition (MMC) • Up-to-date tolerance tables according to common DIN standards • Software module for creating any factory-specific tolerance tables

Condition: refurbished (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, measuring range X-axis: 600 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 350 mm, workpiece weight (max.): 25 kg, warranty duration: 12 months, type of input current: AC, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 350 mm, compressed air connection: 5 bar, Equipment: documentation/manual, lighting, type plate available, Factory-refurbished MAHR Multisensor OMS 600 CNC Gsdpfxsdz Szve Alxsit Including acceptance certificate prior to delivery Technical specifications: Dimensions: 1700x1420x1800mm Weight: approx. 3300kg Measuring range: approx. 600x600x350mm Optical sensor: camera and laser Tactile probe: preconfigured for Renishaw touch probe systems Maximum workpiece weight on glass plate: max. 50kg Maximum traverse speed: 200mm/s Measuring accuracy: E1 (E2) =1.3 + L / 400 µm, E3 = 2.2 + L / 300 µm (L in mm) Compressed air supply: min. supply pressure 6 bar ± 0.1 bar Compressed air consumption: approx. 120Nl/min Power supply: Voltage 230V ± 10% Included: • CNC control unit • Calibration standard • Full version of OptiCheck3D 2025 software The measuring system was comprehensively refurbished by Profitech (Mahr Competence Center) in 2025 and is being used as a demonstration unit. Additional services: assembly, commissioning, calibration, acceptance, training, hotline support, and after-sales service, as well as complete application support from our service center. Furthermore, the measuring system can be customized directly to your parts spectrum upon request and delivered with ready-to-use measurement programs for immediate access by your operators.

Year of construction: 2026, condition: new, Parts cleaning system, spray cleaning system type L90 automatic hot water parts washer with automatic basket drive by means of gear motor, stainless steel washing pump (Lowara), rotating 3-sided spraying system (from below, from the side and from above) with stainless steel nozzles. - basket diameter: 790 mm - useful height: 500 mm - max. loading weight: 150 kg - spraying pressure: 3 bar - tank volume: 105 litres - heating: electrically adjustable (RT - 90°C) plant dimensions (LxWxH): 1.150 x 1.250 x 1.900h mm Empty weight: approx. 220 kg Washing time clock freely adjustable via Omron timer (minutes and hours) complete cleaning machine (interior and exterior) made of stainless steel 1.4301 Gjdpfehgh I Sex Alxsit water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2.000 micron) Suction filter as pump protection Operating hours counter Steam vapour extraction incl. condensate recirculation Preparation for later installation of an oil separator Parts washer is as good as new, never used. OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST !!!

Year of construction: 2017, condition: new, functionality: fully functional, machine/vehicle number: Powerbord SPL 1200mm width Laminating, Model Powerbond SPL 120 Working width: 1.2 m Heating tunnel width: 1.7 m Cooling section: 1 m Electric power supply: 400 V / 3 phase / 50 Hz L1, L2, L3, N, PE Current at full load: 90 A Air supply: clean, dry air at 6 bar Number of heating modules: 24 including preheaters Number of heating zones: 6 Gedpfxjyl Ubfe Alxeit Nominal power per module: 2.4 kW Total heating power: 58 kW Maximum temperature: 220 °C Maximum tunnel height: 150 mm Maximum pressure roller height: 25 mm Conveyor belt speed: 1–15 m/min PLC control system: Omron CJ2M Software serial number: OM1168 Airborne noise emission: < 70 dB(A) Dimensions (W x H x L): 1954 mm x 1480 mm x 3710 mm Weight: 2000 kg

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 2 h, machine/vehicle number: 111, load capacity: 250 kg, mast type: duplex, Equipment: ABS, GSR B240PX – AUTO KOŠARA Stanje: NOVO (2025.) VOZILA U PONUDI Iveco Daily MY24 35S14H Mercedes-Benz Sprinter MY24 315CDI 37/35 TEHNIČKE SPECIFIKACIJE Radna visina: 23,7 m Bočni doseg (80 kg): 12,3 m Bočni doseg (250 kg): 8,25 m Nosivost košare: 250 kg Radni djelokrug: 450° Rotacija košare: 70° + 70° DODATNE INFORMACIJE ✅ Mogućnost kupnje putem leasinga ili kredita ✅ Cijena i dodatne konfiguracije na upit ✅ Mogućnost ugradnje klime ✅ Registracija i atest uključeni u cijenu za Hrvatsku! ✅ Servis i rezervni dijelovi osigurani ZAŠTO ODABRATI GSR AUTO KOŠARE? 🔹 Više od 130 godina iskustva u proizvodnji. 🔹 Svaki stroj se ručno sastavlja i višestruko testira prije isporuke. 🔹 Korišteni samo najkvalitetniji materijali – švedski STRENX i njemački THYSSEN-KRUPP čelici. 🔹 Sve komponente dolaze isključivo s europskog tržišta – vrhunska kontrola kvalitete. 🔹 GSR auto košare su sinonim za pouzdanost, sigurnost i dugovječnost. ELEKTRIČNI SUSTAV Kvalitetne instalacije, senzori i zaštitni prekidači vodećih proizvođača: BOSCH • SCHNEIDER • GEWISS • PENNY+GILES • TELEMECANIQUE • OMRON HIDRAULIČKI SUSTAV Precizan i siguran rad pod visokim tlakovima zahvaljujući provjerenim komponentama: BOSCH • BREVINI • ATLANTIC-FLUID TECH • WALVOIL • REXROTH • PIRELLI CIJENA: NA UPIT Giodpfsxvx S Ujx Alxjt Cijena ovisi o vozilu i konfiguraciji. Više od 30 godina iskustva u: 🔹 Servisu 🔹 Najmu 🔹 Prodaji auto košara 🌍 GENERALNI ZASTUPNICI ZA: Hrvatsku, Sloveniju, Crnu Goru, Bosnu i Hercegovinu i Srbiju

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 3 h, machine/vehicle number: 12, load capacity: 250 kg, mast type: duplex, lifting height: 22,000 mm, Equipment: ABS, 🚀 GSR B220PXE – AUTO KOŠARA Stanje: NOVO (2026.) 🚚 VOZILA U PONUDI Iveco Daily MY24 35S14H Mercedes-Benz Sprinter MY24 315CDI 37/35 ⚙️ TEHNIČKE SPECIFIKACIJE Radna visina: 21,75 m Bočni doseg (120 kg): 11,25 m Bočni doseg (250 kg): 8,45 m Nosivost košare: 250 kg Radni djelokrug: 450° Rotacija košare: 90° + 90° 💡 DODATNE INFORMACIJE ✅ Mogućnost kupnje putem leasinga ili kredita ✅ Cijena i dodatne konfiguracije na upit ✅ Mogućnost ugradnje klime ✅ Registracija i atest uključeni u cijenu za Hrvatsku! ✅ Servis i rezervni dijelovi osigurani 💪 ZAŠTO ODABRATI GSR AUTO KOŠARE? 🔹 Više od 50 godina iskustva u proizvodnji. 🔹 Svaki stroj se precizno sastavlja i višestruko testira prije isporuke. Giodpfx Asxvx Rqelxet 🔹 Korišteni samo najkvalitetniji materijali – švedski STRENX i njemački THYSSEN-KRUPP čelici. 🔹 GSR košare su sinonim za pouzdanost, sigurnost i dugovječnost. 🔹 Sve komponente dolaze isključivo s europskog tržišta, od proizvođača s najvišom razinom kontrole kvalitete. ⚡ ELEKTRIČNI SUSTAV Pouzdan i siguran rad zahvaljujući vrhunskim komponentama: BOSCH • SCHNEIDER • GEWISS • PENNY+GILES • TELEMECANIQUE • OMRON 💧 HIDRAULIČKI SUSTAV Stabilan i precizan rad pod visokim tlakovima – provjerena kvaliteta: BOSCH • BREVINI • ATLANTIC-FLUID TECH • WALVOIL • REXROTH • PIRELLI 💰 CIJENA: NA UPIT 📞 Kontaktirajte nas za individualnu ponudu i dostupne konfiguracije. Više od 30 godina iskustva u: 🔹 Servisu 🔹 Najmu 🔹 Prodaji auto košara 🌍 GENERALNI ZASTUPNIK ZA: Hrvatsku, Sloveniju, Crnu Goru, Bosnu i Hercegovinu i Srbiju

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: 1, power: 100.03 kW (136.00 HP), load capacity: 250 kg, mast type: telescopic, lifting height: 22,800 mm, Equipment: ABS, GSR B230T4 – AUTO KOŠARA TELESKOPSKA Stanje: NOVO (2026.) VOZILA U PONUDI Iveco Daily MY24 35S14H Mercedes-Benz Sprinter MY24 315CDI 37/35 TEHNIČKE SPECIFIKACIJE Radna visina: 22,8 m Bočni doseg (80 kg): 14,4 m Bočni doseg (250 kg): 10,0 m Nosivost košare: 250 kg Radni djelokrug: 450° Rotacija košare: 90° + 90° DODATNE INFORMACIJE Mogućnost kupnje putem leasinga ili kredita Cijena i konfiguracije na upit Mogućnost ugradnje klime Registracija i atest uključeni u cijenu za Hrvatsku! Servis i rezervni dijelovi osigurani ZAŠTO ODABRATI GSR AUTO KOŠARE? Više od 50 godina iskustva u proizvodnji i usavršavanju tehnologije Nema masovne proizvodnje – svaki stroj se precizno sastavlja i testira Korišteni samo vrhunski materijali: • Švedski čelik STRENX • Njemački čelik THYSSEN-KRUPP GSR auto košare su poznate po pouzdanosti, dugovječnosti i jednostavnom radu ELEKTRIČNI SUSTAV Pouzdan i siguran rad zahvaljujući komponentama vodećih svjetskih proizvođača: BOSCH • SCHNEIDER • GEWISS • PENNY+GILES • TELEMECANIQUE • OMRON Gedpfx Alexvx E Usxeit HIDRAULIČKI SUSTAV Visoka sigurnost i preciznost zahvaljujući vrhunskim hidrauličkim komponentama: BOSCH • BREVINI • ATLANTIC-FLUID TECH • WALVOIL • REXROTH • PIRELLI CIJENA: NA UPIT Kontaktirajte nas za individualnu ponudu i dostupne konfiguracije. Više od 30 godina iskustva servisiranju, prodaji auto košara! Generalni zastupnik i ovlašteni servisni centar za talijanske premium auto košare GSR UVOZNIK I GENERALNI ZASTUPNIK ZA: Hrvatsku • Sloveniju • Crnu Goru • Bosnu i Hercegovinu • Srbiju

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 10 h, machine/vehicle number: 123, power: 100.03 kW (136.00 HP), load capacity: 300 kg, mast type: telescopic, fuel type: diesel, color: white, Equipment: ABS, 🚀 NOVO – GSR TELESKOPSKA AUTO KOŠARA 18M (2026.) 🔧 TEHNIČKE SPECIFIKACIJE Gisdpoxvxwdefx Alxst Radna visina: 17,8 m Bočni doseg (80 kg): 12,8 m Bočni doseg (300 kg): 8,15 m Nosivost košare: 300 kg Radni djelokrug: 450° (moguć rad iznad kabine) Rotacija košare: 70° + 70° 🚚 VOZILA U PONUDI Iveco Daily MY24 35S14H Mercedes-Benz Sprinter MY24 315CDI 37/35 ⚙️ STANJE I DOSTAVA ✅ Novo vozilo – model 2026. ✅ Dostupno odmah (ILI NARUČITI). ✅ Registracija i atest uključeni u cijenu za Hrvatsku ✅ Mogućnost kupnje putem leasinga ili kredita. ✅ Mogućnost ugradnje klime. 💪 ZAŠTO ODABRATI GSR AUTO KOŠARE? 🔹 Više od 50 godina tradicije – proizvodnja usmjerena isključivo na kvalitetu i dugotrajnost. 🔹 Nema masovne proizvodnje – svaki stroj se ručno sastavlja i testira više puta. 🔹 Korišteni samo vrhunski materijali: Švedski čelik STRENX Njemački čelik THYSSEN-KRUPP (debljine 2 mm) 🔹 Rezultat: pouzdan rad bez zastoja – potvrđeno od strane brojnih kupaca kroz 30+ godina! ⚡ ELEKTRIČNI SUSTAV Kvalitetne instalacije, senzori i zaštitni prekidači vodećih svjetskih proizvođača: BOSCH • SCHNEIDER • GEWISS • PENNY+GILES • TELEMECANIQUE • OMRON 💧 HIDRAULIČKI SUSTAV Precizan, siguran i dugotrajan rad pod visokim tlakovima – zahvaljujući komponentama marki: BOSCH • BREVINI • ATLANTIC-FLUID TECH • WALVOIL • REXROTH • PIRELLI 💰 CIJENA NA UPIT 🔸 Servis i rezervni dijelovi osigurani 🔸 Generalni zastupnici GSR auto košara 🔸 Dugogodišnje iskustvo u prodaji, servisu i najmu GENERALNI ZASTUPNIK I OVLAŠTENI SERVISNI CENTAR TALIJANSKIH PREMIUM AUTO KOŠARA GSR 📍 Za Hrvatsku, BiH, Crnu Goru, Makedoniju, Sloveniju i Srbiju

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 0 h, machine/vehicle number: 100, load capacity: 250 kg, mast type: telescopic, lifting height: 27,000 mm, Equipment: ABS, AUTO KOŠARA GSR B270T (2026) Stanje: Novo | Dostupnost: Odmah isporuka VOZILA – OPCIJE ŠASIJE Iveco Daily MY24 35S14H Mercedes-Benz Sprinter MY24 315CDI 37/35 TEHNIČKE SPECIFIKACIJE Radna visina: 26,65 m Bočni doseg (80 kg): 16,0 m max. Bočni doseg (250 kg): 11,2 m max. Nosivost košare: 250 kg Radni zahvat: 450° Rotacija košare: 90° + 90° Standardna boja: RAL 9010 (šasija), RAL 9011 (podokvir i oslonci) Platforma: protuklizna aluminijska površina Košara: aluminijska, 1400 × 700 × 1100 mm, tip “Walk-In”, s veznim točkama za sigurnosni pojas Ukupna masa vozila: 3.500 kg Pogon: stražnji (4×2) Mjenjač: mehanički – 6 brzina / 500 Nm Motor: 2.3 L F1A EURO 6D – 136 KS Međuosovinski razmak: 3.750 mm Volan: s lijeve strane Kotači: 225/65 R16 M+S – jednostruki Kabina: jednostruka (2 sjedala) Boja vozila: Polar bijela FUNKCIJE I HIDRAULIČKO-ELEKTRONIČKI SUSTAV Automatske kontrole stabilizacije u košari i na zemlji Gisdpjxvx N Tefx Alxjt Tip stabilizacije: prednji i stražnji – proširivi/vertikalni podupirači Mogućnost simultane manipulacije pokreta Automatsko podešavanje brzine motora Višenamjenski joystick u košari s proporcionalnim elektro-hidrauličnim kontrolama Elektronički upravljački sustav CAN BUS Automatsko niveliranje košare Home Function – automatski povratak u početni položaj Pokretanje i gašenje motora iz košare Ograničivač momenta s dvostrukom sigurnošću Inklinometar (kut nagiba) Zaključni ventili s prirubnicom Zaštita kontrola u košari Sigurnosni bypass za spašavanje operatora Gumb za hitno zaustavljanje i gašenje motora s bilo koje kontrolne pozicije Ručna pumpa za hitne situacije Uređaj za sprječavanje sudara ruke i kabine Indikator zatvorenih stabilizatora u kabini Indikator centriranja zračnog dijela na košari Digitalni brojač radnih sati s indikatorom pozicije stabilizatora ELEKTRIČNI KOMPONENTI BOSCH, SCHNEIDER, GEWISS, PENNY+GILES, TELEMECANIQUE, OMRON HIDRAULIČNI KOMPONENTI BOSCH, BREVINI, ATLANTIC-FLUID TECH, WALVOIL, REXROTH, PIRELLI OPREMA I DODATCI Čelični naplatci Stražnji prozor u kabini Centralno zaključavanje s daljinskim upravljačem Upozorenje za razinu ulja i tlak u gumama ESP sustav + AEBS City Brake (aktivna sigurnost) Asistent za brzinu i inteligentni ograničivač brzine Indikator pospanosti vozača + snimač događaja Automatska kontrola brisača vjetrobrana Prednji zaštitni okvir kabine Zračni jastuci (vozač i suvozač) Bluetooth radio s USB utičnicom Power Take-Off (PTO) za hidrauličku pumpu Set PVC ploča 300×300×30 mm za oslonce DODATNE INFORMACIJE Financiranje putem leasinga ili kredita Cijena i konfiguracije na upit Ugradnja klima-uređaja po želji kupca uz nadoplatu! Registraciju vršimo za Hrvatsku! ORIGINAL C.O.C. UKLJUČEN U CIJENU: C.O.C. ORIGINAL ZA IVECO ILI MERCEDES C.O.C. ZA NADOGRADNJU GSR B270T NA IVECO ILI MB! SA TA DVA ORIGINAL C.O.C.-a. SE AUTO KOŠARA GSR B270T REGISTRIRA U BILO KOJOJ DRŽAVI U EUROPSKOJ UNIJI (EU) I IZVAN, BEZ IKAKVIH DODATNIH ATE- STIRANJA - DAKLE APSOLUTNO NEKOMPLICIRANO! Servis i rezervni dijelovi osigurani Svi komponenti europskog porijekla – maksimalna kvaliteta i pouzdanost! +++OD PROFESIONALCA ZA PROFESIONALCE+++ MI SMO: Uvoznik i generalni zastupnik za GSR auto košare za Hrvatsku, Sloveniju, Crnu Goru, B i H, Srbiju. Više od 30 godina iskustva u prodaji, servisu i najmu radnih platformi. Prva ruka – servis, rezervni dijelovi i tehnička podrška dostupni u cijeloj Hrvatskoj. Cijena: na upit

Condition: used, Year of construction: 2000, IMMEDIATE CLEARANCE SALES AUTOMATIC BED LINEN HEMMING, FOLDING & PACKING PLANT / COMPLETE set Sheeting hemming automate : AKAB AK 244 2437..748 short side / 132 2438 long side Yoc 1991 Max width 240 cm , With Singer sewing mc Speed 170 kpl/h, Sewing Lock 6kpl, Chain stitches and industrial stitches Sweing in Longitude and cross-sectional Duvet cover stitching automate : AKAB Yoc 1984, updated in 2005 with modern Omron logics with Union Special sewing mc , AK 156 2009 short side, 188 2010 long side Max width 180 cm Giedpsy Hvaaofx Alxst Pillow case hemming automate : AKAB Yoc 1983, updated in 2005 with modern Omron logics With folding & conveyor Adler sewing mc Max fabric width 240 cm, with foulding rods for fabric of 150 cm, Akab AK: 198 1870 sewing, 176 1871 fould, 187 1874 conveyor Turning mc for pillowcase : Supaturn SUP 3314 , Yoc 1999 Folding mc Duvet Covers : Jentex Type 5*5, Machnr 42-103, 2000, Max article size 315 x 375 , min 80 x 80 cm Table for fold mc Jomeks, yoc 2001 Folding for pillow cases : JULIEN yoc 1988 For pillow cases max 110 x 120 cm Julien CT/708, 1988 CT/707 Packing station for pillow cases Packing station for pillow cases, with conveyor belt - rollers - see pictures Packing station for duvet covers, with conveyor belt - rollers - see pictures Manual sewing machines : Juki lockstitch DLN-415-4 Yamato overlock AZ 8003-04 DF Yamato overlock YA AZ8003G-04DF/K2/SC10, yoc 2001 Global ylisyrjäys OV-704-050 lift wagon PV-12-3350

Condition: new, mileage: 100 km, power: 130 kW (176.75 HP), fuel type: diesel, fuel tank capacity: 100 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 4, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 5,000 mm, loading space width: 2,400 mm, loading space height: 400 mm, Year of construction: 2025, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, crane, cruise control, electronic stability program (ESP), fog lights, immobilizer system, lane keeping assist, non-smoking vehicle, onboard computer, power assisted steering, power mirror, tachograph, traction control, truck registration, Technical Data * Brand: IVECO * Model: Daily 70C18 * Vehicle Category: Fixed box body 5000 x 2200 x 400 * Year of manufacture: 2025 * Emission standard: Euro 6 * Engine displacement: 2999 cc * Engine power: 180 hp * Fuel type: Diesel * Cabin color: Grey * Wheelbase: 4750 mm * Gross vehicle weight: 7200 kg * Suspension type: Reinforced parabolic springs Gijdpfjy Hkq Tox Alxjt * Twin rear wheels * Axle configuration: 4x2 * Transmission type: Manual * Cabin type: Day cab, 3 seats * Air conditioning: Automatic * Air-sprung driver's seat * ABS: Yes * Hydraulic crane HYVACRANE HB40 – E3 COMPONENTS / PERFORMANCE STANDARDS: ▪ Crane designed and built using finite element method, ▪ Crane structure made of top quality Swedish steel, ▪ Crane manufactured according to the latest applicable standards EN12999, group HC1-HD4. ▪ CE-marked crane with stability system, CRANE BOOM AND BASE: ▪ 3 hydraulically extendable arms (marked grey), ▪ 370 degree slewing angle (slewing via rack), ▪ Mechanical slewing limiter ▪ Centralized base lubrication system ▪ Swivel hook at the end of the boom CRANE CONTROLS: ▪ Ergonomic control panels on both sides of the crane with emergency stop. Safety, ▪ Cross control (identical lever arrangement) on both sides of the unit, SUPPORT LEGS: ▪ Outrigger beam mechanically extensible, span 3.41 m, ▪ Outrigger legs can be rotated manually by 180 degrees. ▪ Hydraulically lowerable/raiseable outriggers ▪ Swivel-mounted outrigger pads, ▪ Independent control of outriggers on both sides, HYDRAULIC SYSTEM: ▪ Hydraulic oil tank with hydraulic oil temperature indicator, ▪ WALVOIL distributor, ensuring very high working precision, ▪ Hydraulic locks on all crane cylinders, Crane Technical Data Manufacturer: HYVA Model: HB 40E3 Lifting capacity 3.83 m – 995 kg 5.18 m – 715 kg 6.53 m – 555 kg Technical specifications Lifting moment (tm): 3.81 Max. lifting capacity (kg): 995 Max. outreach (m): 7.88 Max. lifting height (m): 10.51 Slewing angle (°): 370 Oil tank capacity (l): 30 Max. oil flow (l/min): 16 Operating pressure (bar): 215 No hidden fees with us: - Delivery charges €0 - Documentation €0 - COC €0 - First inspection €0 Financing, leasing, cash payment MORE INFORMATION: Premium Kfz Outlet GmbH Fichtenhöhe 3 02829 Schöpstal OT Ebersbach Germany We are at your service: Mon.-Fri. from 9:00 to 17:00 On Saturday by appointment wir sprechen deutsch we speak English говорим по-русски mówimy po polsku

Condition: new, neu ca. 4 Monate ab Auftragse Türkei Gsdowiq Dfepfx Alxjit 50900 € 962.01 € Doppelsäulenführung 5750 x 41 x 1,3 mm 20 - 120 m/min 420 mm 420 mm 420 x 420 mm 805 mm 1.1 kW 5.5 kW 1 kW 0.12 kW 2860 mm 1980 mm 2100 mm 3700 kg Servo feed with 700 mm stroke Cutting length up to 9,999 mm (multiple feeds) Omron touchscreen, 50 different cutting lengths and 30 programs can be saved Linear guide 41 mm saw blade Control panel Hydraulic vice Hydromechanical blade tension Heavy duty gearbox Coolant device Sensitive pressure Inverter for stepless blade speed Chip brush Optical height adjustment Chip conveyor Operating instructions in GERMAN or ENGLISH