Used Robland Vertical Drilling Machine / Vertical Baz for sale (67,028)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Dsdpjh Ek H Sofx Akmsku Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, This vertical machining center, including the "Clamex unit," is for sale and has seen only a few hours of operation. The machine is being sold because we have switched to a nesting machine. In 2021, the machine was upgraded with a more powerful vacuum pump (16.3 m³). The machine also includes various vacuum clamps; we purchased several larger plates in addition to the standard equipment. Workpiece size: X = 200 - 3200 mm (longer with additional support) Y = 70 - 1200 mm (= max. opening) Material thickness: Z = 8 to 70 mm Max. contour milling dimension in X-direction without clamping: X = 1500 mm Max. contour milling dimension in Y-direction: Y = 985 mm, less milling cutter radius Max. drilling dimension horizontally in X-direction: H = 1168 mm Z-axis stroke: Z = 240 mm Maximum programmable speed: Vector speed: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min Milling spindle 7830, power: 7.5 kW (S6), air-cooled with HSK-F 63 tool holder n(max.) = 1000 - 24,000 min-1, continuously adjustable with collet chuck with HSK shank, ceramic ball bearing (hybrid bearing), tool weight max. 6 kg (incl. holder) Tools: max. Ø 110 mm, tool length max. 80 mm Tool changer 7887, 6-position magazine - pick-up system, pneumatic, max. Ø tool: Ø 110 mm Maximum tool weight: > 5 kg per tool or 30 kg when fully loaded Can be equipped with collet chuck with HSK shank Tool changer 7874, 1-position aggregate magazine, swiveling in X and Y directions, only for special bevel gear 7869 with HSK holder Vertical spindles can be activated individually Arrangement in L-shape, 5 in X and 4(5) in Y direction 32 mm grid Dkedez In Ugspfx Akmju Max. drill diameter: 35 mm Total drill length: 70 mm from mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Direction of rotation: alternating right/left n(max.) 1000 - 4400 min-1, continuously adjustable Holder: M 10 thread - parallel seat 11 mm without tool, without holder 6 horizontal spindles 2 double drilling spindles in X-direction 1 double drilling spindle in Y-direction Holder: M 10 thread, parallel seat 11 mm Total drill length max. 63 mm from mounting end without tool, without holder Sawing unit Integrated sawing unit for sawing/grooving in X-direction n(max.) 1000 - 5650 min-1, continuously adjustable Tool holder: A max Ø = 120 mm, I Ø = 20 mm, B = max. 4.0 mm 4-axis “CLAMEX” tool set - Incl. original tool set consisting of 2 pcs. P-system slot milling cutter, DP (diamond) 100.4x7x30mm, Z3, NLA 4/6,6/48mm 1 pc. Milling arbor for P-system slot milling cutter S20x50mm, d=30, L=102, DTK 48mm 1 pc. Milling arbor for P-system slot milling cutter S16x55mm, d=30, L=68, DTK 48mm 1 pc. CNC drill 6mm for Clamex P, L= 57.5 / shank 10x27 / left 1 pc. Adapter for drill with shank d= 10 mm (left) 1 pc. Collet DIN 6388 form B, double slit, size 25 Clamping diameter 20, for HSK-F 63 holders

Condition: used, Year of construction: 2020, x-travel 762 mm y-travel 508 mm z-travel 610 mm control MAX5 Hurco distance spindle nose and table 152 - 762 mm speed mainspindle max. 12.000 U/min Dodpfxoz I T Rte Akmeku power capacity - main spindel 13,4 kW max. Torque 214 Nm tool taper SK 40 DIN 69871 A table surface area 1.020 x 510 mm max. table load 1.500 kg T-slots 5 x 18 x 100 mm number of toolpositions 30 pos. tool taper SK 40 tool diameter max. 80 / 76 mm tool length - max. 300 mm weight of tools max. 7 kg rapid traverse X-axis 38 m/min rapid traverse Y-axis 38 m/min rapid traverse Z-axis 32 m/min total power requirement 24 kVA weight of the machine ca. 5,1 t dimensions of the machine ca. 4,0 x 4,1 x 2,8 m CNC-Machining Center Vertical HURCO - VMX 30i - Year 2020 / Commissioning 2025 - only approx. 500 operating hours - Adaptipath Trochoidal milling for higher metal removal rates, controlled step-over, and residual material detection - Simulation graphics - Tool and material library - Pocket milling with islands - Synchronous tapping (Tapping without a compensating holder) - incl. 15x high-clamping force chucks BDV40-HMC20S-85 - incl. 3x tapping chucks BDV40-MGT6-80 - incl. mechanical centering vise BSM 250 - incl. 1x set of quick-change hardened grip jaws with grip strip - incl. various tap holders - incl. various drill bits and reducing sleeves

Condition: used, Year of construction: 2007, controller model: Ultimax, table width: 355 mm, table length: 760 mm, number of slots in tool magazine: 20, HURCO VM1 Vertical Machining Center The HURCO VM1 is a compact vertical CNC machining center, ideally suited for precise milling operations in single-part and small-batch production. The machine stands out for its robust construction, user-friendly control system, and efficient tool changing capability. Technical Equipment Worktable: 760 mm × 355 mm Equipped with machine vice CNC control: Ultimax Dkedpeyxcykefx Akmou Automatic tool changer with 20 tool positions Machine Condition and Design The machine features a fully enclosed safety cabin with large front windows. The control panel, including a display, operation keys, and emergency stop, is mounted on the side for ergonomic access. A chip collection tray is located beneath the working area. Thanks to its compact footprint, the HURCO VM1 is especially suitable for workshops with limited floor space, while still delivering high performance and flexibility.

Condition: excellent (used), Year of construction: 2013, operating hours: 9,300 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 520 mm, controller manufacturer: fanuc, table width: 400 mm, table height: 400 mm, table length: 1,000 mm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, The machine is powered on and can be demonstrated. The measuring probe and tool measurement system are included. Dsdoz Iifmspfx Akmoku

Condition: like new (used), Year of construction: 2006, operating hours: 671 h, functionality: fully functional, total height: 2,992 mm, total length: 3,980 mm, total width: 2,580 mm, overall weight: 8,500 kg, operating hours of spindle: 671 h, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this as new Quaser MV154 APC/P vertical machining center, year of construction 2006. The machine has 9039 power-on hours, but only 671 spindle-hours, this has been confirmed in the parameters aswell. The machine has seen very little usage. When i bought this machine the linear guides for the X & Y axis was worn out as they had not been lubricated properly and with the incorrect grease. These have been swapped for brand new ones, aswell as most of the air and coolant hoses. All the lubricating lines for the X & Y guides and ballscrews have also been renewed. There are some tools in the 48 tool magazine aswell. It also has a 3D Taster. The chip conveyor also has new bearings and seals. Two Hilma vices could also come with the machine. I have done a ballbar test and checked the machine to be in great working order. The size of the machine also makes transportation easy, as it will fit inside a standard curtain semitrailer. Djdpfx Akezxz Dfemeku If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2006, operating hours: 39,500 h, functionality: fully functional, machine/vehicle number: 15425021604, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,700 mm, total length: 2,800 mm, total width: 2,800 mm, table length: 1,200 mm, rotational speed (min.): 12,000 rpm, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 16,075 h, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: DC, Equipment: documentation/manual, DMG Deckel Maho DMC 1035 V vertical machining center, year of manufacture 2006 The machine has only processed plastics – in good condition! Year of manufacture: 2006 Machine number: 15425021604 Condition: Good Delivery terms: Free loading onto truck Location: 72178 Waldachtal !!!!!The machine must be collected on 21.10.2026! We can offer transport if required!!!!! Payment terms: Payment in advance – by bank transfer Internal number: 180-1 Can be inspected while powered on: Yes Dkedpez I Dl Iofx Akmsu Technical data: - Operating hours (machine on): approx. 39,447 h (will increase slightly) - Spindle hours: 16,075 h (will increase slightly) - Tool holder: SK40 - Max. spindle speed: 12,000 rpm - Tool magazine: 30 positions - Table dimensions: 1200 x 560 mm - Control system: Heidenhain iTNC 530 - Travels X / Y / Z: 1035 / 560 / 510 mm - 400 V / 50 Hz / 35 kVA Scope of delivery: - Manuals and documentation - Wireless measuring probe Heidenhain TS640 - Handwheel - Programmable 4th axis Lehmann - Angle plate - Manual dividing head - Swivel vice Note: The vices on the machine table and the tool holders in the magazine are not included in the scope of delivery! Dimensions & weights: - Installation dimensions L x W x H approx.: 2800 x 2800 x 2700 mm - Weight approx.: 5000 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional information: ►If required, we can offer transport to the destination. ►The quoted price is net, plus VAT. ►The goods are sold with exclusion of all warranties. ►Technical data without guarantee. ►Subject to prior sale. ❗The goods are sold exclusively to businesses❗

Condition: used, Year of construction: 2019, Control HEIDENHAIN x-travel 1.600 mm y-travel 1.300 mm z-travel 700 mm table dimensions 1.500 x 960 mm spindle tunring speed 15.000 U/min Djdpfxjz Nqbto Akmoku number of tool places 30 Pos. Condition: Used Technical features & accessories: - HR510 handwheel - HWANG KANG chip conveyor - KAUKAN KO-4PTHS oil cooling unit - KAUKAN KO-12PTSDC2 oil cooling unit Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Year of construction: 2018, 2018 Fanuc Robodrill D21MIB5 Twin Robot Machining Cell with (2) Fanuc Series 31I-Model B5 CNC Controls Cell Comprising: Twin Fanuc Robodrill Type A04B-0104-B181 Vertical Milling & Drilling Machining Centres (S/Nos. P186ZG729 & P186ZG731). Table Size Approx 650mm x 400mm. Travel: 'X' Approx 500mm, 'Y' Approx 400mm, 'Z' Approx 330mm. Max Table Load 300kg. Number of Tool Pockets 21. Max Tool Length 250mm, Max Tool Weight 3kg. BT30 Spindle Taper. Max Spindle Speeds 10,000 RPM. Nikken TAT-170N (2018) Pneumatically Operated Rotary Support Table with 4th Axis Fanuc DDRiB-104-B181STD. ABB Flexloader SC3000XL Extended Conveyor Loading System (S/No. M180057-1) with Fanuc ABB 6 Axis Robot IRB 4600 & Fanuc ABB 6 Axis Feeder Robot IRB 1200 with Schunk Grab. Feed In/Feed Out Belt Conveyors. ABB Flexloader Vision. FSE E7326 Filtration, 950 Litre Capacity Coolant & Swarf Management System. Andreas Maier AMF 6906/61919 Hydraulic Equipment. This Cell Includes: Euro 250 Bowl Feeder on Stand with CVIC Digital Control. Desoutter ECS16-M20 Current Controlled Screwdriver. Robot Pendant ABB DSQC 679. Signal Tower Lights. Transformers. Weight of each Machining Centre Approx 2,400kg. Floor Space Required for Full Cell Approx 8,000mm x 6,500mm. 3 Phase Power Supply, 415 Volt. Fixtures Not Included. Swarf Bins Not Included. Viewing Recommended. Dedsz E Sbrjpfx Akmjku

Condition: used, Year of construction: 2003, functionality: fully functional, Sale only within the EU. Without the pneumatic tensioning device! Dksdpfez N Eaksx Akmsu Dismantling and loading will be carried out by the seller. Transportation will be handled by the buyer.

Condition: used, Year of construction: 2008, functionality: unexamined, machine/vehicle number: 2200180, travel distance X-axis: 1,600 mm, travel distance Y-axis: 815 mm, travel distance Z-axis: 815 mm, spindle speed (max.): 4,500 rpm, spindle motor power: 20,500 W, The Saeilo Contur KV 1600 is a used vertical machining center, manufactured in 2008 by Kent Industrial in Taiwan and distributed in Germany through Saeilo. With an X-axis travel of 1,600 mm and 815 mm in Y and Z, it is suitable for long plates, housings, and fixture components that can no longer be accommodated on smaller machining centers. It is controlled by a Siemens Sinumerik 840D. The machine is located in the Düsseldorf area. TECHNICAL DATA - Year of manufacture: 2008 - Control: Siemens Sinumerik 840D - Travel X / Y / Z: 1,600 / 815 / 815 mm - Spindle speed max.: 4,500 rpm - Spindle drive: 15 / 20.5 kW, ball screws - Tool holder: ISO 40 - Tool magazine: 32 positions - Gearbox: ZF two-stage gearbox EQUIPMENT AND ACCESSORIES - Chip conveyor Mayfran LT 200 LS - Tool holders, partially populated - Drilling and milling tools - Two vices on the table (according to the photos) CONDITION During our inspection on October 1, 2026, the machine was not in operation. Therefore, we are selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION Typical applications include plates, housings, molds, and fixtures in mechanical engineering and contract manufacturing. The long X-axis travel also allows for shuttle machining with two setups. Dsdpfxjz H Uf Ns Akmeku LOCATION AND PROCEDURE The machine is located in the Düsseldorf area. Inspection is possible by appointment. The buyer is responsible for disassembly, loading, and transport; upon request, we can provide contact details for local freight forwarders. Price upon request. Please feel free to contact us via the contact form.

Condition: good (used), Year of construction: 2002, functionality: fully functional, total height: 2,900 mm, total length: 5,000 mm, total width: 3,000 mm, table width: 850 mm, table length: 1,250 mm, overall weight: 8,000 kg, spindle motor power: 15,000 W, number of spindles: 1, type of input current: AC, Equipment: chip conveyor, documentation/manual, We are offering a machining center from the manufacturer Ibarmia with a controlled 4th axis/rotary table. The machine is in good condition and can be inspected and tested in our facilities while powered on. Manufacturer: Ibarmia Dkodpfjz Ia U Esx Akmeu Type: ZV25/L16000 Year of manufacture: 2002 Control: GE Fanuc Series 18i-M Technical data: Travel distances X-Y-Z: 1600x410x410 mm Travel distance B-axis: 360*0.001° Rapid traverse X: 40 m/min Rapid traverse Y-Z: 60 m/min Main spindle: Spindle speed: 15,000 rpm Main spindle power: ISO-SK-40 Tool changer: Number of positions: 24 Machining area: Table dimensions: 850x1250 mm Internal coolant supply (IKZ) Machine dimensions: 5000x3000x2900 mm Weight: 8,000 kg

Condition: not inspected (used), Year of construction: 2003, Vertical CNC milling machine MORI SEIKI NV500A/50 (2003) at auction. MSG-501 control, X-axis travel 800 mm, table 1,100 x 600 mm, 30-tool magazine, spindle up to 8,000 rpm, machine weight approx. 6,700 kg. Used CNC mill Dodpfxjz I Ebqo Akmjku

Condition: good (used), Friedrich Deckel FP 2 LB Tool Milling Machine The accessories are not included in the scope of delivery but can be purchased in another auction at this link. Lot of Milling Tools The universal milling machine Deckel FP 2 LB is characterized by its extremely stable base and is designed as a floor-standing machine. This means that the machine retains its precision even when machining heavy workpieces weighing up to 1000 kg. Another feature is the 45-degree inclined bed. After removing the universal table, this design allows for direct clamping and machining of V-engine blocks with a 90-degree cylinder angle, such as American V8 engines. Furthermore, the long travel of 800 mm is advantageous in this application. Technical data: Deckel Universal Milling Machine FP 2 LB Digital display: 3-axis digital display Heidenhain Travel X-axis: 800 mm Travel Y-axis: 300 mm Travel Z-axis: 400 mm Tool holder: SK 40 clamping thread S 20 x 2 Milling head type: Vertical milling head Dkodpfxsgyw S To Akmou Speed range: 40 - 2000 rpm Number of steps: 18 Table type: universal swivel/tilt table (± 45° / ± 15°) Table clamping surface: 1000 x 520 mm T-slot size: 16 mm Vise 160 mm Connected load: 9.5 kVA Weight: approx. 1900 kg Dimensions: approx. 1570 x 1675 x 1850 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: like new (used), Year of construction: 2019, Various spare parts for Chiron BAZ Dodpfez I T Acox Akmoku Rotary tables Axles Ball screw and more

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, overall weight: 7,990 kg, CHIRON FZ 18 S MAGNUM HIGH SPEED – 1998 – after a comprehensive factory overhaul by CHIRON For sale is a CHIRON FZ 18 S MAGNUM High Speed vertical CNC machining center manufactured in 1998. The machine is equipped with Siemens SINUMERIK control, an automatic tool changer, and a high-speed spindle designed for efficient and precise machining. It also has an oil mist extraction system with a filter. The most important advantage of the offered machine is the comprehensive inspection and overhaul carried out in 2020 by CHIRON. As part of the work, key machine components were replaced, including: spindle, control computer, pumps, systems, and other components included in the modernization program. Complete service documentation is available for the work performed, confirming the scope of the overhaul. Technical data: Manufacturer: CHIRON Dedpfx Akezdkhqemoku Model: FZ 18 S MAGNUM High Speed Year of manufacture: 1998 Control: Siemens SINUMERIK Machine number: 493-01 Weight: approx. 7,990 kg Power supply: 400 V Connected power: 27 kVA Automatic tool changer Vertical CNC machining center The machine is complete and ready for further operation. Thanks to the comprehensive overhaul carried out by the manufacturer, it represents an attractive alternative to much more expensive, newer machining centers. Complete CHIRON overhaul documentation from 2020 is available. Inspection and verification of the machine's condition on-site are possible.

Condition: not inspected (used), Year of construction: 1970, - Drilling diameter: 5-30 mm - Drilling depth: 750 mm Dsdpexzz Hofx Akmeku - Filter - Pump

Condition: like new (used), Year of construction: 2015, operating hours: 500 h, functionality: fully functional, * Okuma Millac 852V II / 50. * Machine in excellent condition with very few cutting hours. * High metal removal rate machine. * Box guideways on all axes. * Quadruple box guideway system on the Y-axis. * Extremely rigid structure. * Oil-fed guideway lubrication system with automatic machine stop. * Renishaw tool probe. * BT 50 spindle taper. * High-torque 18.5 kW motor. * Cutting torque: 580 Nm. * Chip evacuation capacity: 540 cm³/min. * Okuma IGF OSP300 automatic conversational programming system. * Automatic force control and tool usage monitoring. * Parametric automatic tool anti-collision system. * Communication ports: USB, PCMCIA card, and RS-232. * Tool life management and usage tracking. * Automatic control of torque and tool stress. * Table dimensions: 2,200 x 850 mm. * Maximum load capacity: 2,500 kg. * Spindle speed: 6,000 rpm. * X-axis travel: 2,050 mm. * Y-axis travel: 850 mm. * Z-axis travel: 750 mm. * Spindle oil cooler. * Rapid traverse speed: 20,000 mm/min. * 36-tool magazine. * Tool change time: 0.5 seconds. * Chip-to-chip time: 5 seconds. * Independent Knoll coolant system (70 bar pressure). * 30-micron particulate filter system. * LTA mist filtration system. * Rear-mounted hinge-type chip conveyors. * Machine currently in production. * Inspectable by a qualified official Okuma technician. Dedpfx Akez Nc Rlomsku * Condition: Like new. * Extensive BT 50 tooling/holder package. * Includes electrical transformer, documentation, parts list, electrical schematics, and programming/operation manuals. * Machine weight: 20,500 kg. * Immediate delivery available (subject to prior sale).

Condition: good (used), Year of construction: 2012, operating hours: 18,000 h, functionality: fully functional, machine/vehicle number: 1097151, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, controller model: Haas CNC Control, total height: 6,350 mm, spindle speed (max.): 12,000 rpm, tool diameter: 76 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, HAAS VM-3 – 2012 Dsdpfx Aoym N Ehekmeku We are selling this machine due to purchasing newer, more expensive equipment and limited shop space. The machine is in good working condition and currently under power / in use. All standard specifications and dimensions are available online. If you have specific questions, feel free to contact us. The machine is equipped with the option to connect a 4th or 5th axis rotary table. Please note that rotary units are not included in the sale, but the machine is prepared for future expansion. Before shipping, the machine will be professionally cleaned by a specialized company. Tools, holders, chucks, and other accessories used with the machine are included. Transportation is the responsibility of the buyer. Please contact me via email or WhatsApp for more information.

Condition: good (used), Csepel RF50/1250 Radial Drilling Machine Dksdszninwopfx Akmeu Robust and reliable radial drilling machine from the reputable manufacturer “Csepel”, model RF50/1250. This machine is characterized by its solid construction and is ideal for workshops, metalworking shops, or demanding DIY enthusiasts. Technical specifications (according to the nameplate): Manufacturer: Csepel (Budapest) Type: RF50 / 1250 Power supply: 3~ (three-phase / 380 V) Frequency: 50 Hz Control voltage: 220 V Operating current: 10 A Required fuse rating: 16 A, slow-blow You can find more new and used items in our shop! International shipping costs available upon request!

Condition: like new (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, torque: 115 Nm, controller manufacturer: Fanuc, total height: 2,750 mm, total length: 2,200 mm, total width: 2,360 mm, table width: 500 mm, table length: 900 mm, table load: 500 kg, overall weight: 6,400 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, Year of manufacture: 2013 CNC Fanuc TABLE Table size: 900 x 500 mm Five T-slots: 18 H 8 mm Maximum permissible weight on the table: 500 kg WORKING CAPACITY X-axis: 700 mm Y-axis: 530 mm Z-axis: 560 mm Spindle nose – table surface distance: 150 / 710 mm Spindle axis – column surface distance: 550 mm SPINDLE Spindle diameter: 70 mm Spindle taper connection Big Plus: ISO 40 DIN 69871 Spindle speed: 50/12,000 rpm Spindle motor: 15/11 kW Maximum torque: 115 Nm FEED RATES Rapid traverse rates for X/Y/Z axes: 32 m/min Working feed rates: 20 m/min TOOL MAGAZINE Number of tools: 30 Tool taper: ISO 40 Dkjdpfxozr Uq Ss Akmsu Maximum tool diameter (without adjacent tools): 76 / 125 mm Maximum tool weight: 7 kg MACHINE DIMENSIONS Height: 2,750 mm Footprint: 2,200 x 2,360 mm Weight: 6,400 kg Machine complete with: •Presetter •Probe •Vise •Tool cabinet •Instruction manuals and CE declaration

Year of construction: 1994, condition: good (used), machine/vehicle number: 491P, Technical data: - Drilling capacity in steel ST 60: 28 mm - Drilling diameter in steel ST 60: 32 mm Djdpedkx Anofx Akmsku - Drill spindle mount: MK 3 - Right/left rotation - Drill spindle stroke: 150 mm - Drill spindle speeds, stepless: 80 - 1170 rpm - 2 feed rates: 0.1 / 0.2 mm/rev - Overhang: 290 mm - Max. distance table - drill spindle: 780 mm - Table with 2 T-slots: 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.9 / 1.3 kW - Space requirement, approx.: W 600 x H 2100 x D 900 mm - Weight, approx.: 420 kg - Includes: - Coolant system - Quick-change drill chuck 1-13 - Lighting

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Table ... 1300 x 550 mm X ... 1050 mm Y ... 530 mm Z ... 510 mm Spindle revolutions ... 10 - 12000 rpm Dksdpfjz Nkn Tex Akmeu 3 axes Taper in spindle ... ISO 40 Max. table loading ... 1200 kg Number of tools in tool changer ... 30 Number of pallets ... 2 Machine weight ... 7700 kg

Condition: good (used), Year of construction: 2012, Haas VF-2SSYT Year of manufacture: 2012 Spindle speed: 12,000 RPM CT40 taper Tool Set Carousel (TSC) Workpiece Probe System (WPS) Renishaw probing system 4th axis, wired Dodjz Ihc Rjpfx Akmsku Video available!

Condition: good (used), Year of construction: 2013, Travel ranges (working area) Dkodpfx Ajz Nktvjkmeu X-axis: 660 mm Y-axis: 406 mm Z-axis: 508 mm Spindle nose to table: approx. 102 to 610 mm Coolant system Feed rate / rapid traverse (X / Y / Z): 28 / 28 / 28 m/min Tool changer: Magazine for up to 24 tools (SK40) Max. tool weight: 7 kg