Used Roughness Measuring Device Measuring Device for sale (17,499)

Condition: new, Measuring area: 75 - 88 mm Gisdjd Efd Ispfx Ahzow

Condition: good (used), Year of construction: 1998, Measuring device for checking the gas volume in insulating glass. Giedpfx Ahjyll H Eozjw Width: 204 mm Height: 180 mm Depth: 270 mm Weight: 5.7 kg

Condition: good (used), Wenzel roughness and contour measuring station for crankshafts  Measuring plate made of hard stone length: 3670 mm Godpfxjihille Ahzsiw width: 850 mm Flatness tolerance according to DIN 876/1 Nominal value 48 µm Actual value 32 µm Ident No.: 14280 JFA unwinding trestles Financing through our bank is also possible. komplett-konzept.leasingo.de Further measuring plates in other sizes - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1997, Residual oxygen measuring device for checking the gas volume in insulating glass. Dimensions: Gisdpfx Ahoi Azc Aozsw Depth: 270 mm Width: 204 mm Height: 180 mm Weight: 5.7 kg

Condition: used, Tool presetting machine SOMET, type SPS 500 U Machine no. S1, Year of manufacture 1987 Table surface 545 x 1000 mm Travel ranges X = 500 mm, Y = 340 mm Width in the portal 550 mm Height table - lower edge of portal 250 mm - Longitudinal guide on the portal, right and left of the table - Adjustment via very fine lead screws with handwheel - Quick adjustment via electrical release Gijdpfxedzqrtj Ahzow - Projector screen Ø 150 mm with crosshair and coordinates MEOPTA PMP100 - 2 units of clamping devices for tool measurement - mounted on a base with storage compartment and drawer Space required L x W x H: 1100 x 700 x 1650 Weight 560 kg In good condition

Condition: used, Testing console, testing station, measuring station, testing device, measuring device, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage testing device PE/IS/HV SCT 42 / 91-3J.3 is used for measuring voltage resistance, insulation resistance, and the voltage drop of the protective conductor, in accordance with VDE0113 or IEC standards, as per EN60204, Part 1. Serial No.: 0064016 Year of manufacture: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device 90-1V provides a highly stable direct voltage with low ripple. One output pole carries high voltage, and the other output pole is close to ground and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year of manufacture: 2000 Supply voltage: 230 VAC Supply frequency: 50 Hz Rated current: 1 A Interference suppression according to VDE 0871 Rated power: 14 watts Gisdsf Axn Aepfx Ahzow Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year of manufacture: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Device unit, compact on a rolling frame - Various connection cables and accessories as shown in the picture Overall dimensions L x W x H: 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices are available under storage numbers 57819, 57820 and 57821.

Year of construction: 1998, condition: excellent (used), Control: CNC-controlled and manual operation PC P 2000 MMX-PCI Desktop ATX 15" color monitor, keyboard CNC Turbo Roughness for WINDOWS TECHNICAL DATA Hard stone inspection plate (DIN 876) Length x Width: 1200 x 500 mm Accuracy class: Grade 2 Flatness: 16.6 µm Weight: 250 kg Linear feed unit Waveline 60 Basic Probing range: 60 mm Resolution: 0.014 µm Measuring column Wavelift 400 CNC Travel range: 400 mm Positioning repeat accuracy: < 10 µm Gsdpfx Aolxyqcjhzeiw Machine dimensions (W x D x H): 1.8 x 0.8 x 2.2 m Weight: 600 kg EQUIPMENT / ACCESSORIES  Completely enclosed housing with electrically operated shutters  Hard stone plate 1200 x 500 mm  ISEL feed axis with ball screw drive  Workpiece mounting plate  Linear feed unit Waveline 20/60  Measuring column Wavelift 400 CNC  Tilting unit KEG 60 on the measuring column, manually adjustable for Waveline  Installation kit for roughness measurement  Probes and holders for roughness measurement  Machine table  Emergency stop button on the machine table  Maintenance unit for compressed air preparation  Air damping elements for hard stone plate support  Documentation

Condition: good (used), Mahr Perthen Perthometer S4P roughness tester 1 x Mahr Perthen Perthometer S4P roughness tester 1 x Mahr Perthen 6 86 20 63 1 x Mahr Perthen 42 50 01 50 up to 160 mm Ø Gjdpfx Ajihfmujhzsiw Find more roughness gauges in other sizes- new and used

Condition: new, Year of construction: 2024, functionality: fully functional, Baty Venture FV - Flexible and precise vision measurement system in three variants The Baty Venture FV is a state-of-the-art vision measuring system developed for the fast and precise inspection of complex workpieces. It provides optical measurements that enable comprehensive detection of the workpiece geometry. This system is particularly suitable for the manufacturing industry, which demands both speed and precision in quality control. The Venture FV is available in three different versions to cover different measurement requirements: Available models: Baty Venture FV1080 With a measuring range of 100 mm x 80 mm, this compact version is ideal for smaller workpieces. It offers fast and precise inspection and is perfect for applications where both optical and tactile measurements are required. Baty Venture FV2020 This variant has a measuring range of 200 mm x 200 mm and is suitable for medium-sized workpieces. The CNC control in combination with the Fusion 3D software enables fully automatic measurements, which increases efficiency and precision during inspection. Baty Venture FV3020 With a larger measuring range of 300 mm x 200 mm, the FV3020 is the largest variant available. It is particularly suitable for the inspection of complex workpieces where high precision and detailed measurements are required. Common functions: CNC control: all models are CNC controlled, enabling fully automated, repeatable measurement processes that increase throughput on the shop floor. Software: This powerful software supports CAD import/export, DXF overlays and reports that include statistical process control (SPC). Programmable LED lighting: LED lighting provides optimal illumination of the workpiece to enable accurate edge detection and measurement. Advantages: Versatility: with three different variants, the Baty Venture FV offers the perfect solution for workpieces of different sizes and complexity. Gijdpfx Ahouyig Sezjw High measuring speed: Thanks to the CNC control and user-friendly software, measuring times are reduced and efficiency is increased. Precision: The measuring device ensures that both simple and complex workpieces are measured with maximum accuracy. The Baty Venture FV offers the ideal combination of speed, precision and flexibility for companies that need a reliable inspection solution in their production

Condition: ready for operation (used), Year of construction: 1984, Offered is a material tensile testing machine year 1984. Shear force tensile tests on reinforcing steel, max. tensile force 200kN, clamping device, external control unit. Viewing possible by appointment. Gijdjxzik Espfx Ahzow

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, overall weight: 2,000 kg, repeat accuracy: 0.01 mm, The machine was completely overhauled in 2020 and equipped with new measuring components. TECHNICAL DETAILS Measuring range X-axis: 700 mm Measuring range Y-axis: 600 mm Gedpfx Asyfz Ulohzeiw Measuring range Z-axis: 500 mm Repeatability: 0.01 mm MACHINE DETAILS Software: PC-DMIS CAD++ Version 2018 R1 and 2019 R1 DIMENSIONS & WEIGHT Dimensions (L x W x H): 1,790 x 1,500 x 2,730 mm Net weight: 2,000 kg EQUIPMENT Workstation (PC including software and monitor, 690 x 1,150 x 1,250 mm)

Year of construction: 2018, condition: excellent (used), Maximum component weight: 75 kg Maximum moment load of the work table: 1250 g/mm Giedpfxoi Dagko Ahzow Dimensions of work table: 800 x 890 mm Height of working table: 731 mm Measuring height: 500 mm Total height: 1675 mm

Condition: used, CNC 3D coordinate measuring machine, MORA type Pico 0245.04.05.06 Machine No. Year of manufacture 2005 Measuring range X = 600 mm, Y = 500 mm Measuring height Z-axis 400 mm Machine table = granite slab 1250 x 1200 mm Slab thickness 200 mm Clearance in machine column 720 mm Axis travel speed - setup max. 65 mm/sec. Axis travel speed - rapid traverse max. 250 mm/sec. Mains connection: 400 volts, 50 Hz - Granite worktop with 200 mm threaded grid - RENISHAW PH10T motorized rotary/tilt head with interchangeable TP20 measuring probe - 1 probe head holder with manual adjustment - Various probe heads - Gemodek Microspeed 10 axis control in adjacent control cabinet - Manual control via handheld control panel with joystick and LCD display - Reference sphere on the table Gedpfx Aherdlrxszoiw - PC for measuring software: Intel Pentium 4, 512 MB RAM, mounted in the machine base - 22-inch TFT monitor - Windows XP operating system - INCA 3D measuring software (license expired) The measuring machine was operated with a rental license and maintenance contract. Measuring machine footprint: W x D x H 1950 x 1800 x 2450 mm Measuring machine weight: 1250 kg Control cabinet weight: 120 kg Very good condition

Condition: new, Year of construction: 2025, functionality: fully functional, ASB length stop with digital display Measuring range: 1,000 mm / 1,500 mm / 2,000 mm / 2,500 mm / 3,000 mm ... up to 6,000 mm Manual length measuring device with battery-powered digital display and fixed end stop. Right-hand mounting (left-hand option available) Measuring accuracy: ±0.1 mm Total length: Measuring length + 350 mm LCD display permanently integrated Display powered by batteries with an approximate service life of 1,000 hours in continuous operation Minimal installation effort required Gisdpfx Ahjxu Iaxezew Freely configurable set values Switchable between absolute and relative measurement modes

Condition: used, Optacom VC-10 Universal Measuring System Surface Roughness Tester / Contour Measuring Device Device is sold without PC and software (hardware only). Resolution in X and Z axes: 0.002 µm Resolution at the probe tip: 0.003 µm VC-10 measuring range horizontal/vertical (X-axis/Z-axis): 225 mm Measuring system: optical, incremental, and non-contact in all axes (X, Z, T) Accuracy: +/- (0.5 + L/100) µm Maximum measuring force: 10 - 150 mN Measuring speed: 0.1 – 2 mm/sec (automatically optimized) Probe tip radius: 0.002 – 1 mm Measurable slopes: 78° upwards; 87° downwards VC-10 dimensions (W x D x H): 950 x 380 x 725 mm VC-10 weight (approx.): 150 kg Description has been adopted as provided. You are welcome to arrange an on-site inspection. Upon request, we can organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check out our other offers as well. Giedpfx Ahjybbd Sszsw The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Garant HC 1 Height Measuring Device Measuring range: 600mm Dimensions: 240mm x 250mm x 1000mm (L x W x H) Weight: approx. 30 kg Calibration standard is not included in the scope of delivery. For further technical data, please refer to the images. You are welcome to arrange a viewing appointment. We are happy to organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Gedsxv Ampspfx Ahzeiw Visit our shop and browse our other listings. All brand names and trademarks mentioned are the property of their respective owners and are used for identification and descriptive purposes only. Technical data may vary and errors in the description of the item are possible and reserved.

Condition: excellent (used), functionality: fully functional, measuring range X-axis: 100 mm, measuring range Z-axis: 1 mm, travel distance Z-axis: 550 mm, Mitutoyo roughness measuring machine Surftst SV 3100 H4 in very good condition measuring ranges: Z = 0,8mm (stage 550mm) X = 100mm Machine was completely overhauled und got a used PC (new installed) and nearly new software Formtracepak 4.0 machine will be equiped with a very new roughness sensor (4mN) Overhauled measuring table (50x100mm) and self centering vice for € 2.500,-- on demand. Optionally we offer installation, calibration and softwaretraining Gsdpfx Ahordg H Uszeiw Price is for delivery inside european union

Year of construction: 2016, condition: like new (used), Renishaw Roughness measuring kit for REVO incl. Gjdpeni Arnsfx Ahzjiw - SFP1 Modul - SFS1 Probe straight - SFS2 Probe cranked - SFA roughness standard - SFCP positioning device for SFP1 - RCP TC-2 modul changer

Condition: excellent (used), functionality: fully functional, measuring range X-axis: 25 mm, measuring range Z-axis: 1 mm, Well-maintained Mitutoyo surface roughness tester Surftest, model SV402. Measuring ranges: Z = 0.8mm, X = 50mm. Includes: Mitutoyo measuring stand with mounting plate, roughness reference standard, standard measuring probe 4mN, 90°, built-in printer. Optional: Various measuring probes from €250, used vise €100. Gedpfx Aex N Ukpohzoiw Price includes delivery within the EU.

Condition: excellent (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Included in the scope of supply: 1x Push-through safety device, used Material color: hot-dip galvanized Overall length: approx. 2,700 mm U-profile: 50 x 50 mm Agraffen dimensions: 335 x 50 mm (H x W) 4x Hex bolt: M10 x 35 mm 4x Lock nut: M10 8x Washers: M10 Gjdjh T Uwvspfx Ahzjiw Additional information: System: SSI Schäfer For type designation: PR350/400 Designed for double rows of shelving Suitable for clear width: approx. 2,700 mm General information about the item: This item is offered for collection only. Any further transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery. Our services at a glance: (Prices upon request) Assembly, installation Our general assembly conditions apply Shelf inspection Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all shelving systems Delivery with our own fleet (without unloading)

Year of construction: 2007, condition: excellent (used), Approx. 11,000 push-through guards for SSI Schäfer R 3000, for a field width of 1.28 m – used: Gjdog Rmf Eepfx Ahzeiw Price per unit: €2.00 (net)! Minimum order quantity: 200 units! Manufacturer: SSI Schäfer Type: R3000 Year of manufacture: 2007 For field widths of 1.28 m Condition: good Available: immediately Location: Frankenberg warehouse

Condition: good (used), Price plus VAT. This package includes: 1 x Tegometall push-through safety bar, 2,700 mm Giedpfsg S Uxmjx Ahzow Manufacturer: Tegometall Condition: used, good condition Length: 2,700 mm Color: yellow Mounting: for hanging

Condition: like new (used), Ideal for traverses 2700 mm. If you require shelves or accessories in other configurations or designs, please contact us. Giedpfxjpu Amwe Ahzow We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you with your planning. Further accessories such as Frame, corner and collision protection, push-through protection, chipboard, gratings, rear wall gratings, depth bars available. Shipping: Please enquire about freight costs, stating your zip code and location, as well as the required quantity of items. Further services: Planning, shelf assembly/disassembly, purchase/sale Subject to changes and errors in technical data, information and prices as well as prior sale!

Condition: good (used), Image processing control unit, camera control -Manufacturer: Vision Device, camera controller for 2 cameras -Type: unfortunately no further type designation -Individual components/connectors: see photos -Dimensions: 200/145/H110 mm -Weight: 1.4 kg Gisdexvp S Eopfx Ahzjw

Condition: good (used), Year of construction: 2005, functionality: limited functionality, Description MEASURING ARM IN SUITCASE. EQUIPMENT WE CAN SEND FOR CUSTOMER WOLDWIDE Specifications Manufacturer FARO - SWITZERLAND Model PLATINUM P04 Gsdpfjvlaq Iex Ahzjiw Year 2005 Condition Used