Used Stanztechnik Glaser Gmbh Ac/Dt for sale (75,631)

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: Ncodpfxoy S Rw Ds Akujt The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, year of last overhaul: 2025, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: Njdpfxsy S Rv Ts Akujct one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, laser hours: 2 h, laser power: 30 W, laser wavelength: 1,064 nm, laser type: fiber laser, laser source manufacturer: Raycus, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) Ncedpfxsqfcvij Akujt - Weight: approx. 100 Kg

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 1,500 mm, total height: 2,050 mm, total length: 900 mm, working range: 600 mm, overall weight: 120 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, table length: 600 mm, table width: 600 mm, space requirement width: 1,550 mm, space requirement height: 2,100 mm, laser wavelength: 1,064 nm, working height: 950 mm, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 Watt, 20 Watt or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled Nsdpfxoy T Ixne Akujct - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: good (used), mileage: 148,321 km, power: 184 kW (250.17 HP), first registration: 10/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,550 mm, fuel: diesel, fuel tank capacity: 300 l, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, total length: 10,000 mm, total width: 2,550 mm, total height: 3,750 mm, permissible axle load (axle 1): 4,480 kg, permissible axle load (axle 2): 8,480 kg, loading space length: 8,200 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Year of construction: 2023, Equipment: AdBlue, Technical Information Number of cylinders: 6 Engine displacement: 6,871 cc Maximum front axle load: 4,480 kg Maximum rear axle load: 8,480 kg Weights Nodpfxjy Szlfj Akuect Unladen weight: 6,920 kg Payload: 5,070 kg Gross vehicle weight (GVW): 11,990 kg Functional Loading platform height: 300 cm Maintenance, History and Condition APK (General Technical Inspection): valid until 01/2027 Technical condition: good Visual condition: good Further Information Please contact Martin Vos Vos, Martin Martin Vos, or Martin Vos for more information. = Company Information =

Condition: good (used), Year of construction: 1991, Welding fume filter, Tebaron, TE 1200 – used - : Price ex location: €650 (net) Manufacturer: ISI Industrie-Produkte GmbH Model: TE 1200 Year of manufacture: 1991 380V, 1.1kW, 2.6A, IP54 Condition: good Availability: immediately Ncsdpfxeyhxl Rs Akust Location: Waltrop

Condition: used, maximum load weight: 32,550 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2013, next inspection (TÜV): 08/2026, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,800 mm, loading space volume: 94 m³, Equipment: ABS, 3-axle Krone SD Standard Tautliner VIN: 560092 Chassis / Components: * Air suspension // Raise and lower * SAF landing legs * 3 x BPW axles with disc brakes * Tires: 385/65 R22.5 * Fifth wheel height approx. 1140 mm * 2 x spare wheel holders Superstructure: * Tautliner Standard * Multilock * Aluminum slats * Edscha * Side curtains * Certificate: EN 12642 Code XL * VDI 2700 Sheet 12 (beverages) Weights: * Gross vehicle weight: 39,000 kg * Tare weight: 6,450 kg * Payload: 32,550 kg Other: * German semi-trailer * Valid vehicle inspection (HU) New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates. Furthermore, we can arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English, and Russian!---- Nodpfxsy T Tn Us Akujct No liability for printing and typographical errors, changes, prior sale and errors. Subject to change!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. See for yourself! Our service for you: Loading of vehicles We will gladly help you with the loading of your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Day license plates / export license plates We will gladly help you obtain export license plates / short-term license plates.

Condition: new, cutting width 115 und 82 mm Cutting height 55 mm Motor output 2.0 kW machine weight ab. 45 kg KS crosscut saw for cutting (glass) strips with manual and electronic length stop Suitable for wood, PVC, aluminum ----- Brief manufacturer's description: Njdpfoy T R Sqsx Akusct - Crosscut and miter saw for precise and user-friendly cutting to length in the strip area - Sturdy gray cast iron construction - A double ball-bearing axle acts as a pivot point below the material support table, facilitating material cutting. The cut is always made at the rear top. - Quick miter adjustment up to 45° - Readjustable fixed stops at 90° and 45° - Upper saw blade guard can be connected to extraction system ----- Technical data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Max. cutting width: 115 mm (at 90°); 82 mm (at 45°) Max. cutting height: 55 mm Mitre range: 45° - 90° - 45° Saw blade diameter: 250 mm Extraction nozzle diameter: 45 kg ----- Technical description: Item 1.1 Crosscut and miter saw type KS, 2 kW, 400 V, 30/40 mm saw blade holder Item 1.2 Pivot point LEFT Item 1.3 Pneumatic material clamping for KS, on both sides of the saw blade, 2 horizontal pneumatic cylinders, controlled via roller valve during saw stroke, can be switched off Item 1.4 HM circular saw blade for wood 250 x 2.8 x 40 mm 80 teeth neg ----- ----- Price of the above machine on request! Plus packaging and shipping ----- Options with additional charge: Item 1.5: EUR 1,270.00 Digital electronic angle display for one axis, crystal display, 1.5 V battery power supply, reading via magnetic tape and magnetic sensor, resolution 0.1° Item 1.6: EUR 695.00 Machine stand for KS crosscut saw ----- Item 2.1: Electronic length stop with support plate EUR 7,290.00 Electronic length stop type RLE 2.0 m – with support plate Mounting side: LEFT Electronic length stop system for cutting strips Travel distance 1.8 m, overall length 2.0 m 10" touch display, 230 V connection Feed speed 40 m/min Direct measuring system – repeat accuracy +/- 0.1 mm Working mode: (1) automatic absolute stop, (2) cutting lists, (3) pusher cutting lists, (4) step measurement, (5) fine adjustment Program memory for up to 999 cutting lists USB import and direct editing of cutting lists on the terminal Stop can be folded away to the rear With support foot Item 2.2: 295.00 EUR Support 2 m, right, 110 mm wide, with support ----- Item 3.1: Manual length stop EUR 600.00 Length stop 2 m, left, with 110 mm wide support, with scale, foldable stop slider and support Item 3.2: EUR 295.00 Support 2 m, right, 110 mm wide, with bracket ----- (Technical data according to manufacturer - no guarantee!) All prices quoted are net. Plus statutory VAT.

Condition: new, functionality: fully functional, power: 4.8 kW (6.53 HP), fuel type: gasoline, overall weight: 550 kg, maximum load weight: 500 kg, lifting height: 1,020 mm, chain condition: 100 %, Year of construction: 2025, Equipment: hydraulics, rubber tracks, tilting carriage, Mini Track Dumper HT500Y-4 Compact professional dumper with lifting function – now with a 10% promotional discount The Mini Track Dumper HT500Y-4 is the ideal solution for construction, gardening and landscaping, agriculture, and work in confined spaces. Thanks to its rubber tracks, hydraulic tipping mechanism, and powerful lifting function, the dumper is extremely off-road capable, stable, and easy to operate. The machine impresses with its compact design, high load capacity, and a reliable Briggs & Stratton gasoline engine. 🔥 PROMOTION: 10% DISCOUNT ON ALL TRACK DUMPERS Take advantage of our current sales promotion: 10% discount on all track dumper models – for a limited time only, while supplies last! The HT500Y-4 is ready for immediate use and offers a powerful combination of performance, maneuverability, and ease of operation. ⚙️ Technical Data Engine & Drive Engine: Briggs & Stratton Engine Type: 1-cylinder, OHV, 4-stroke, air-cooled Displacement: 203 cc Power: 6.5 HP at 3600 rpm Fuel: Gasoline Fuel Tank Capacity: 3.6 liters Performance & Capacity Maximum Payload: 500 kg Weight: 550 kg Skip Volume: 200 dm³ Tilting Angle: 100° Tilting System: Hydraulic Dimensions Machine Dimensions without Pedal & Skip: 1570 × 880 × 1450 mm Machine Dimensions with Foot Pedal & Skip: 2050 × 880 × 1450 mm Skip Dimensions: 1050 × 730 × 730 mm Track Width: 700 mm Lifting & Height Maximum Lifting Height: 1020 mm Njdpfx Aoyqxw Iskuect Maximum Tipping Height: 970 mm Tipping Distance: 220 mm Ground Clearance: 110 mm Undercarriage Track Width: 180 mm Track Contact Area: 1000 mm Track Gauge: 520 mm Turning Radius: 1150 mm Speed: 2.88 km/h Climbing Ability: 20° Rubber Tracks for Optimal Ground Grip ✅ Features & Benefits ✔ Removable protective container ✔ Simple control via operating lever ✔ Foldable standing platform for flexible work ✔ Very compact – ideal for tight construction sites ✔ High stability thanks to track undercarriage ✔ Low-maintenance gasoline engine ✔ Hydraulic tilting function ✔ Powerful lifting function for comfortable unloading Application Areas Construction & Renovation Gardening and Landscaping Agriculture Barn & Farm Work Material Transport on Difficult Terrain Work in Confined Spaces Condition & Delivery Available immediately New / unused, from current production Factory-tested, ready for immediate use Europe-wide delivery via freight forwarder possible 💶 SECURE PRICE ADVANTAGE Net list price: €3,800 Promotional price with 10% discount: €3,420 net plus VAT Save now – better price possible! Benefit from our attractive promotions. An inquiry is worthwhile! Location: Rheda-Wiedenbrück Inspection possible by appointment ➡️ Request now and secure a 10% promotional discount on track dumpers!

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 382, Log sawing line with infeed and outfeed conveyors, 2 x 2 electrically movable sawblades, sawblade diam 970 mm, main el.motors 2 x 45kW. Log length 0,8 - 8 m, max log diam 40 cm, original electric cabinet, line is still under power and can be demo started up, line has been in operation totally 3-4 years Nodpfxjxwyzgj Akuoct

Condition: excellent (used), Year of construction: 2021, operating hours: 9,500 h, functionality: fully functional, machine/vehicle number: 3284, Standard version of RUF Lignum R2 with outfeed channels, el.motor 22 kW, briquette sizes 150x60 mm Ncsdpjyyl Srefx Akujt capacity up 500 kg/h

Condition: used, empty load weight: 10,600 kg, maximum load weight: 22,500 kg, overall weight: 33,100 kg, axle configuration: 3 axles, first registration: 12/1984, loading space length: 11,900 mm, loading space width: 2,730 mm, loading space height: 950 mm, suspension: steel, tire size: 7.50R15, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 3-axle, SAF axles, leaf suspension, lashing eyes, 2-section ramps, mechan. Ramps, aluminum side bumpers, supports, twin tyres Body: 3-axle low-loader semi-trailer with 2-section mechanical ramps Loading length plateau bottom approx. 8900mm! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ncedpfx Akji Rp A Njuet - .

Condition: used, Used packaging and conveyor system from CALJAN for logistics, shipping, or parcel processing. The system includes roller conveyors, belt conveyors, and multiple workstations. Manufacturer: CALJAN Loading Systems Ncjdpfxey Tyvlo Akujt System type: Packaging and transport system Design: Roller conveyor / belt conveyor Construction: Steel structure Stations: 37 Application area: Logistics, shipping, order picking Condition: Used Further information available upon request.

Year of construction: 2006, condition: ready for operation (used), An automatic glass sandblasting cabin is offered. Working range X/Y: unlimited/1500mm, extraction air capacity: 1800m³/h, filter area: 17m², filter differential pressure: 1500Pa, operating principle: automatic surface blasting operation, filter system: cartridge filter unit with pneumatic cleaning, glass transport: vertical roller conveyor system, control: PLC control with digital control panel. Equipped with separate filter unit, blasting nozzle feed unit, water separator, enclosed cabin construction with rubber buffer inlet. Weight: approx. 1550kg, overall dimensions X/Y/Z: approx. 4500mm/2850mm/1650mm. Inspection possible by arrangement. Nsdpfx Asy Tn I Aokuoct

Condition: used, Year of construction: 2025, operating hours: 8 h, machine/vehicle number: C300002625, mast type: telescopic, fuel type: diesel, Empty weight: 12.225 kg Lifting capacity: 340 kg Working height: 2.220 cm Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1730 m Ncjdjx Uv Ugepfx Akujt Transport dimensions (LxWxH): 10.21x2.49x2.57 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2025, machine/vehicle number: C300002967, mast type: telescopic, fuel type: diesel, Empty weight: 12.225 kg Lifting capacity: 340 kg Working height: 2.220 cm Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Nsdpfx Aox U Rg Rokusct Tyre brand: - Max. horizontal reach: 1730 m Transport dimensions (LxWxH): 10.21x2.49x2.57 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2025, operating hours: 68 h, machine/vehicle number: C300001316, mast type: telescopic, fuel type: diesel, Empty weight: 12.375 kg Lifting capacity: 340 kg Working height: 2.220 cm Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1730 m Transport dimensions (LxWxH): 10.21x2.49x2.57 Njdpfx Akjxc Dl Teuoct Please contact PFEIFER GROUP for more information

Condition: used, fuel type: diesel, mast type: telescopic, Year of construction: 2025, machine/vehicle number: C300002960, Empty weight: 12.225 kg Lifting capacity: 340 kg Working height: 2.220 cm Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1730 m Transport dimensions (LxWxH): 10.21x2.49x2.57 Please contact PFEIFER GROUP for more information Njdjx Azi Nopfx Akuect

Condition: good (used), Year of construction: 1999, Approx. 23 units of OTTO hazardous goods containers, 600L, Large Packaging "IBC" – used: Price per unit ex-location: €395 (net)! Manufacturer: Otto Containersysteme GmbH Model: 11A/X/01/99/D/OTTO/BAM 0356/2556/1090 Serial number: 33782 Year of manufacture: 1999 Capacity: 600L Tank material: St. W 24 Maximum permissible gross mass: 1,090 kg Tare weight: 190 kg With certification as Intermediate Bulk Container (IBC) for national (GGVS/GGVE/GGVS) and international (ADR/RID/IMDG Code) transport of dangerous goods of packaging groups I, II + III (X rating) * Dimensions per DIN 30741 * Steel container, hot-dip galvanized Ncodpjwzyn Defx Akujt * With hinged, lockable lid * Lid locks in place by special spring mechanism at any opening angle up to approx. 70° * Container with continuous body, only 2 closures on the front * With forklift pockets, safety hooks for PE bags, type plate and compartment Condition: good Available: immediately Location: D-06766 Bitterfeld-Wolfen

Condition: used, Mecof CNC Bed Type Milling Machine x 9000mm Key Specifications Manufacturer Mecof Nsdpfxjy N Amxj Akuoct Condition Used Stock Number 00265 Table Size 9000 mm × 2200 mm X-Axis Travel 7200 mm Y-Axis Travel 1008 mm Z-Axis Travel 2040 mm Universal Head Heidenhain TNC 426 CNC Control Hand Wheel

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 30 h, Equipment: centralized greasing system, dust extraction, emergency stop, fume extraction, safety light barrier, Tube Laser Cutting System Ideal for Entry-Level Applications. Simplicity meets efficiency with the Durma HD-TC COMPACT 60250 entry-level tube laser. Perfect for workshops, metal fabricators, and others looking to step into tube laser processing, this laser offers straightforward operation, reliable performance, and excellent value for money. Discover how the Durma HD-TC COMPACT 60250 can enhance your production with precise cuts and user-friendly technology, adding value to your operation. 3 kW Laser Power Maximum Sheet Thicknesses: - Mild Steel: 12 mm - Stainless Steel: 6 mm - Aluminium: 6 mm - Copper: 3 mm - Brass: 6 mm Capacity: - Maximum Tube Diameter: Ø250 mm - Maximum Square Profile Dimensions: 160x160 mm - Maximum Rectangular Profile Dimensions: 200x150 mm - Minimum Tube Diameter: 16 mm - Maximum Material Length: 6000 mm - Minimum Remnant Length: 65 mm - Unloading Length: 3000 mm - Semi-automatic unloading unit: optional (6m) - Maximum Material Weight: 58 kg/m - Maximum Total Workpiece Weight: 350 kg - Profile types that can be cut: Round, square, rectangular, elliptical - Open profile types that can be cut: I, C, L - Maximum open profile dimensions: 240x240 mm Dynamics: - X-Axis: 40 m/min - Y-Axis: 94 m/min - Z-Axis: 30 m/min - A-Axis: 510 °/s Accuracy: - Positioning Accuracy: ±0.2 mm - Positioning Variation: ±0.05 mm - Tube Center Detection with Capacitive Sensor: Yes Additional Available Configurable Options. LASER POWER: - Upgrade to DURMA LASER SOURCE BRILASE 4 kW ADVANCED fiber laser source (incl. chiller) + Durma cutting head - Upgrade to DURMA LASER SOURCE BRILASE 6 kW ADVANCED fiber laser source (incl. chiller) + Durma cutting head OPTIONS: - Air filtration system (40 bar N₂ + 16 bar O₂ + 16 bar Air) Ncederkntcopfx Akuot - Air filtration system (40 bar N₂ + 16 bar O₂ + 40 bar Air) - CNC oscillating head (+/- 45°) - Semi-automatic front loading system - Unloading table (6m) with conveyor - Unloading table (3m) with conveyor - Additional dongle software - Transformer 220, 440, 575V SOFTWARE OPTIONS: - Durma Cloud License + D-Mobile + Smart Watch - STEP file importer

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 2026, Optical precision drill grinding High-precision and very easy-drill grinding with optics and , Costsaver and Swiss in 100% quality. grind drills, thinning and check in the shortest time and with maximum precision. With MEGA POINT blue line you win more than once, achieve with it: - Better positioning - Improved accuracy of diameter - Significantly longer service life - Feed force is greatly reduced The MEGA POINT blue line is a versatile precision drill grinding machine, which is easy and ergonomic operation and a variety of drills handelsueblichen nachschleift perfect and optimized. MEGA POINT blue-line 1-20mm (Optiom to 30mm) Technical specifications: Our MEGA POINT drill grinding allows precise and rapid regrinding and thinning all handelsueblichen drills. Our customers have so always perfectly ground drills for disposal. The sophisticated design provides enormous flexibility in terms of the different cut angles and the thinning of the drill. Without a doubt, the world's best conventional drill grinding! Technical specifications Drill material grinding HSS and carbide HSCO Point angle adjustable 80 ° - 150 ° optional tip angle adjustable up to 180 ° Chuck with collets for drill diameters from 1 to 6.5 mm Chuck with collets for drill diameter 7 - 20 mm optional Spannzangenset for drill diameter 20 - 30 mm Average / free angle adjustable 0 - 40 ° Ausspitzvorrichtung, Ausspitztiefe adjustable CBN grinding wheel double-fine / coarse D 125 mm optional DIAMOND grinding wheel (for carbide drills) D 125 mm CBN grinding wheel for thinning D 50 mm x 4 mm Engine power 0.3 kW Spindle speed 2800 r / min Power supply 230 volt 50 Hz Dimensions (L x W x H) 50 x 50 x 50 cm Weight about 42 kg Nedpfxo R R R Sj Akuect Standardausfuehrung For right- and left-cutting, two- and dreilippige drills. With built-in optics (10x Zoom) separate Ausspitzvorrichtung and: 1 Machine light 2 chucks with collets D 1 -6.5 mm and D 7 - 20 mm 1 CBNDoppel grinding wheel D 125 mm fine / coarse 1 CBNSchleifscheibe D 50 x 4 mm 1 Set of service tools 1 instruction manual with spare parts list 1 CD-ROM with manual (CE Declaration) Danger: OPTIMA / TATAR Parts BERGER technology will take over on January 1, 2016, the stock of spare parts of HighTech OPTIMA AG. We can now offer genuine spare parts and service for the OPTIMA and TARTAR Boherschleifmaschinen.

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 800 mm, total height: 2,000 mm, total length: 900 mm, overall weight: 100 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, input current: 16 A, space requirement width: 800 mm, laser wavelength: 1,064 nm, working height: 900 mm, space requirement length: 900 mm, input frequency: 50 Hz, laser type: fiber laser, Equipment: fume extraction, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg Ncedpsywg Sbefx Akujt

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 140 kg, total length: 900 mm, total width: 800 mm, total height: 2,000 mm, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 150 mm, scan area width: 150 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Ncsdpfxexuvk Ej Akujt Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: good (used), 7x pallet transport racks, Lützenkirchen – used - : Ncsdpfx Aow Acruekuet Price per unit: €395 (net), dismantled, packaged, and loaded! Manufacturer: Lützenkirchen Lagertechnik GmbH Type: / Year of manufacture: not specified Load capacity: not specified Quantity: 7 Dimensions: L76cm x W60cm (54cm effective) x H30cm Condition: good Available: immediately Location: 04720 Döbeln