Used Umg-401.17 Log Feeding Line for sale (21,982)

Condition: used, Year of construction: 2010, _____Keenan Mech Fiber 300 - Year of manufacture: 2010 - Container volume: 12 m³ - Three-point linkage - Discharge at the front left - Tires: 305/55 R 22.5 - Lighting system - STAD 400 control panel Net price: 4,900.00 Gross price: 5,831.00 Dksdpfx Akezdmu Hemeu Storage location: null

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Extruder Granulator Dkjdpszylxiefx Akmou Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: refurbished (used), Meat processing line to produce a coarse sausage mix / burger mix / pet food line Taking a tempered frozen meat block into a Guillotine Giraffe feed up into a mincer, Mincer to coarse mince flaked meat Incline conveyor taking minced meat through a 10 mm to 16 mm hole plate Minced meat transferred by the conveyor into the Mixer Grinder Add seasoning / water etc to complete the recipe Mix in the mixer grinder for 3 to 5 minutes Dodpfxezl Tb Ns Akmjku Mince out through a 5 mm to 8 mm hole plate into a tote bin. Ruhle Guillotine Scansteel Giraffe Feeder Laska WW 130 2 Cross feed Mincer Incline conveyor Thompson 4000 Mixer Grinder Product ready for the next stage vacuum filler / tray depositor / burger former etc

Condition: used, Year of construction: 2022, electric lighting jockey wheel 16/6.50-8 night swath gear hydr. / wheel spreading device / Dksdpfx Ast I Hbuokmsu

Condition: new, Year of construction: 2026, functionality: fully functional, FABO Log Washers are designed to remove woods, plastic clay contaminants and other harmful materials from gravel, stone and hard ore feeds. Designed to successfully clean the most difficult materials, FABO Log Washers allow the user to obtain valuable products from what was once considered waste. When selecting a Log Washer, the variety of feed material must be taken into consideration. The volume and shape of the feed material can influence the capacity of a particular size fraction. FABO can provide a list of capacities and water requirements based on the user's material. Dksdpfx Akjy I Nugemou Key benefits to the buyer include improved wear characteristics, reduced costs and the ability to efficiently wash aggregates and drift out clays/sands/lights (wood/plastics) on one chassis.

Condition: used, Year of construction: 2014,

Condition: used, Year of construction: 2023, Three-point linkage Electric lighting CE Equipment package / Standard PTO shaft fitted / Dkodpfjuifvljx Akmju

Condition: used, Year of construction: 2023, Spreading device additional standard PTO shaft mounted jockey wheel 15/6.00-6 / Dedpfothhcwsx Akmeku

Condition: ready for operation (used), Year of construction: 2024, We offer for sale a modern PAOLETTI Salvacut 3000 automatic cross-cut saw, designed for high-performance and precise cutting of wood materials. This machine represents a powerful and efficient solution for automated cutting operations with high speed, accuracy, and reliability. Key Features & Benefits Manufacturer: Paoletti Energy S.r.l. Model: Salvacut 3000 Year of manufacture: 2024 Automatic cutting system for high productivity Suitable for industrial wood processing and production lines Robust and modern construction Technical Specifications General Voltage: 400 V Frequency: 50 Hz Installed power: 12 kW Saw motor power: 5.5 kW Cutting System Saw blade diameter: 500 mm Bore / thickness: 35 / 4.2 mm Cutting speed: 2880 rpm Minimum cutting time: approx. 0.3 s Material Capacity Dkjdozgr Scspfx Akmou Max. cutting section: approx. 70 × 300 mm Max. workpiece length: approx. 5,100 mm Min. workpiece length: approx. 500 mm Min. cross-section: approx. 30 × 15 mm Performance & Feeding Maximum feed speed: up to 200 m/min Material feed direction: right to left (left to right on request) High-speed automatic processing Compressed Air & Extraction Air pressure: approx. 6–8 bar Air consumption: approx. 500 Nl/min Extraction capacity: approx. 5,000 m³/h Extraction speed: approx. 28–30 m/s Extraction connections: Ø120 mm and Ø100 mm Dimensions & Weight Main unit weight: approx. 2,000 kg Max. output sorting unit load: approx. 500 kg Working height: approx. 1,000 mm Operating Conditions Operating temperature: +5 °C to +40 °C Storage temperature: +5 °C to +40 °C Advantages High cutting speed and precision Reliable industrial design Suitable for continuous operation Efficient material processing with stable output quality Additional Information CE certified Modern machine (2024) – very good condition

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg Dksdpfouzn Nnjx Akmsu All units tested and in good condition.

Condition: used, Year of construction: 2019, Action package 1 Walterscheid wide-angle articulated top hitch / electro-hydraulic operation Hopper inner ring (straw ring) Reduction gearbox / 1000 rpm with el. hydr. operation Umscha pneumatically braked axle 20 m3 / i-FeedGood L with 4 weighing rods Dkedettv Imopfx Akmsu

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt Djdpfxjxf Up Uo Akmeku - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: used, Year of construction: 2016,

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Dksdpfx Akjwuzzremju Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Dsdpsi Akrkefx Akmsku Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Condition: good (used), Bacciottini Pit Stop DG LINE 8000 Automatic Creasing Machine Fully operational and ready to use. Djdpfjzt H Rajx Akmjku This is the most efficient creasing and perforating system on the market, featuring a robust design. Made in Italy. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. The set includes creasing and perforating tools. Technical data: Maximum sheet size: 500 x 700 mm Min. sheet size: 80 x 100 mm Maximum speed (for A4 format): 8000 sheets/h Material weight: 80-400 GSM Maximum number of creases per sheet: 20 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 230 V Power consumption: 2 kW Weight: 180 kg Dimensions: 1500 x 750 x 1200 mm

Condition: used, Year of construction: 2013, Three-point attachment Lighting with warning signs / Dsdpfxjtwyw Ne Akmeku

Condition: used, Year of construction: 2022, A complete can filling and packaging line with can feeding, lid feeding, filling, sealing, capping, labeling and banding is available, 1) feeding system, with two format-adjustable rotary tables for the separate feeding of empty cans and lids, 2) REX EVF 327 vacuum filler, year of manufacture: 2017, 3) Fillpack R01-TI filling and closing machine, format: 75-400ml, year of manufacture: 2022, for filling, positioning and sealing the sealing foil as a tamper-evident seal, placing and screwing on the lid, 4) CDA NINON labeling system, year of manufacture: 2021, for lid, wrap-around and body labeling, 5) Garvens BF 8 S2 automatic checkweigher, year of manufacture: 2002, as an inline checkweigher with automatic rejection of products not conforming to the specified weight, 6) ECOMA can banding machine, max. output depending on format: approx. 35cans/min, year of manufacture: 2022, for control or security bands, 7) COMPRAG ARD-1510 screw compressor, power: 15kW, max. operating pressure: 10bar, air flow rate: 1.9m³/min, year of manufacture: 2022, with RH-500 compressed-air receiver (500l) and refrigeration dryer, the connecting conveyor technology, controls, control cabinets and format parts for 75ml and 400ml cans are included, an on-site inspection is possible. Dedpfxez Ibxxo Akmeku

Condition: new, functionality: fully functional, A new log step feeder will be made to order based on your technical requirements. Djdpfx Akjyfmn Remsku

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. Dksdpfettlfkjx Akmsu LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.

Condition: excellent (used), Automatic filling system Logdos Späth GmbH Type K-DOS.F/AL 40/EX for filling liquids into buckets, jerricans, IBCs and drums ATEX-protected mobile, can be moved on rollers compact dimensions: 3m x 2m x 2m (L x W x H) Programmable X/Y axis and palletizing Dkjdpfeiyytqjx Akmou Very good condition, directly from production!!!

Condition: good (used), Year of construction: 2002, operating hours: 1,378 h, Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Operating hours: 1,378 Screw diameter: 25 mm Dodpfsz Eg Awjx Akmoku Screw L/D: 44 Dimensions (LxWxH): 4,500 x 1,200 x 2,200 mm Weight: 1,350 kg Line configuration: – 1x gravimetric powder feeding system from Brabender – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities – Cooling roll with tempering unit – Pelletizer with adjustable speed – Central control cabinet Other: All documentation available in German The machine was originally used for biomaterials

Condition: used, Year of construction: 2012, Scales Double-sided outlet 2 augers / Dksdpfx Aoua Hriskmeu

Condition: used, machine/vehicle number: 008276, Position 1: Planers/Moulding Machines KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 2: Panel Feeding and Loading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 3: Panel Stacking and Offloading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Dsdpex A Tbwsfx Akmoku

Condition: used, Year of construction: 1999, hydr. folding balloon tires / Dodpfx Aouh Ugqokmsku