Used Vibratory Sieve for sale (684)

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014200, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space height: 900 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,500 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: grey-black, Chassis, Semi-trailer, Logistics Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin Outer frame slightly angled, new design with "Load-Lock profile" for securing lashing straps 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without lateral support Free support leg angle or free swivel radius to the rear, approx. 1920 mm 2 support wedges with holder Aluminum side impact protection Steel underrun protection Partial wheel covers in front of and behind each axle Splash flaps in front of the 1st axle and behind each axle with anti-splash protection, according to EC regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Axles + Suspension SAF drum brake axles "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist function, activated by "3x braking" (starting assist function is operational up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended ride height, therefore no guarantee for tire damage Braking System 2-line compressed air brake system Color-coded line routing for easy maintenance Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving Stability System Wheels and Tires 235/75 R17.5, brand according to the manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable Rjdpfx Aboza A Txj Tscf Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5,600 kg Front wall / corner posts 25 mm aluminum hollow profile, 1,350 mm high, corner posts made of steel in a full-volume design Country of Approval / Signage Germany With DEKRA inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau Front corner posts: hot-dip galvanized Front wall: aluminum

Condition: excellent (used), Year of construction: 2015, COMPLETE PELLET PRODUCTION LINE 6 t/h Hydraulic walking floors - double for hard and soft wood Conveyor belt 12m with magnetic separator for chips Two hammer mills each 130 kW for wet material Two beams with hydraulic floor befor drum dryer Rodpfxsqy Hcde Ab Tscf Dryer for drums of 12 m FIEDLER boiler 3.5 MW Refiner 250kW with transport fan and filter Silos bin ZEPI for dry material Z conveyor ZEPI above three silo bins for pellet mill 0qe0k TRI Pellet Mill ZEPI ZPM600 with 200kW (2pcs) and 160Kw Pellet mill production year 2015 (two pcs) Conveyor belt 10m for hot ball, conditioner and aspirin system vibro sieve ESSEGI packaging system (ITA) 2019 Pallet system ROBOTIK KOGLER (SLO) 2015 Grecon spark detection system Electrical cabinet room for complete equipment Line in operation, capacity 6-7 t/h

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,860 h, functionality: fully functional, machine/vehicle number: 3155220747, overall weight: 458 kg, rotor diameter: 300 mm, number of blades: 5, total length: 1,130 mm, total height: 1,570 mm, total width: 1,000 mm, power: 6.1 kW (8.29 HP), type of input current: three-phase, input voltage: 380 V, blade width: 300 mm, Equipment: documentation/manual, The compact SINCRO 315 EKO granulator is designed for recycling rigid and flexible cables. By shredding and subsequently dry-separating the material, it effectively separates copper and aluminum from insulation (such as plastic, rubber, or paper). The machine can be fed either manually or automatically by adding a conveyor belt, according to user requirements. The SINCRO 315 EKO cable shredder is fully soundproofed and consists of the following components: - Granulator with three rotary and two fixed adjustable knives, as well as a screen perfectly matched to the granulator. Redoy Sh Dbjpfx Ab Tocf - Control panel with an intuitive arrangement of control buttons. - Adjustable, easily accessible vibratory dry separator. - Two completely independent air circuits, which reduce maintenance needs and enhance the sorting process. Performance: - Up to 130 kg of input material per hour, depending on the type and size of the processed material and screen. - Combining it with a PMG pre-shredder increases throughput and reduces component wear, as ferrous parts are separated using a magnet installed on the conveyor, also reducing labor requirements. Processes unshredded cables: - Flexible copper cables up to Ø22–25 mm - Rigid copper cables up to Ø20–22 mm - Aluminum cables up to Ø20–25 mm Your benefits: - Best price/performance ratio - Quick return on investment - Machine retains high resale value - Compact, ideal solution for limited spaces - Environmentally friendly with low energy consumption and low noise - Capable of recycling a wide range of materials - Easy operation and maintenance

Condition: used, Year of construction: 2018, Overview  This complete brewhouse and cellar system was manufactured between 2018 and 2021 by several European equipment suppliers including Brewiks, Milan Svoboda, Mercabrewers, Wild Goose, Quantor and others. It features a 5 HL Brewiks brewhouse, a 12 HL fermentation cellar (6 CCTs), CIP stations, a canning line, labelling and coding units, water treatment, air treatment, chiller and full malt-handling equipment, being a turnkey solution for beer production. Rcedjyb R Iaopfx Ab Tef Technical data  - Brewhouse (Brewiks 500, 2018) - Capacity: 5 HL - Heating: Electric, 36 kW - Fermentation Cellar (Svoboda + Mercabrewers, 2018–2021) - 6 CCTs × 12 HL useful capacity - Pressure rating: 3 bar - CIP Stations (Svoboda CIP 100) - 2 mobile CIP units - Tank capacity: 100 L (alkaline + acid) - Canning Line (Wild Goose GOSLING, 2021) - Semi-automatic - Formats: 0.33 L / 0.44 L / 0.50 L - Cooling (Quantor Chilly MAX 50L) - Glycol chiller for CCTs - General Key Information - Power supply (various units): 230–400V, 50 Hz - Applications: Brewing, fermentation, can filling Scope of Delivery  - Brewiks Brewery (5 HL) | Brewiks | Brewiks 500 | 2018 | Electrically heated (36 kW) - Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (1/3) - Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (2/3) - Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (3/3) - Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (1/3) - Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (2/3) - Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (3/3) - CIP station | Milan Svoboda | CIP 100 | — | Mobile; 100 L alkaline + 100 L acid (1/2) - CIP station | Milan Svoboda | CIP 100 | — | Mobile; 100 L alkaline + 100 L acid (2/2) - Hop Cannon + Bag Filter | 3M | Series ME 01MET2 | — | 30 L capacity - Glycol cooler | Quantor | Chilly MAX 50L | — | Operational, heavily used - Canning line | Wild Goose | Quick Change GOSLING | 2021 | Semi-automatic; incl. formats 0.33 / 0.44 / 0.50 L - Can Rinser + Gravity Feeder | Zomerdijk Engineering | TWIST Rinser | — | For 0.33 / 0.44 / 0.50 L - Labeler + Printer | EME (Crafted Goose) | Jem-110-S2 | — | Automatic; integrated printer - Thermal inkjet printer | Rynan | R20 (CM220) | — | Batch and date printing - Air compressor | ABAC | 50 Hp2 | 2020 | 10 bar; 50 L tank - Dehumidifier | ABAC | COOL21 (CO) | — | 16 bar; 350 L/min - Reverse osmosis system | AquaControlada | — | — | 2 units (drinking & process water) - Water tank | ROTH | — | — | 2× 750 L - Malt mill | Sommer | Maltman 220 | — | Precision mill - Sieve shakers + sieves | RETSCH | AS200 Basic | — | Complete sieve set for malt analysis

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 Rodpswc Ri Iofx Ab Tscf 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: good (used), Grinding bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory finishing round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies, drying granules, desiccant -Manufacturer: Walther Trowal, drying granulate type GM -Grain: see photos -Price/tax: complete -Transport dimensions: 1200/800/H600 mm -Total weight: 72 kg Rcedsrxw E Espfx Ab Tsf

Condition: good (used), circular vibrating screening plant, screening machine, vibrating screen, vibrating screen, vibration motor, shaker, sorting system, shaking system, sifter, control screening machine, analysis screening machine Rcedpovgw Rnjfx Ab Tjf -Manufacturer: Siebtechnik, control sieving machine Elekto-Schnellsieb with 5 sieve inserts -Type: Perflux for the production of grinding wheels -Sieve inserts: Size 60 my to 2360 my, see photo parts list -Transport dimensions: 1200/800/H670 mm / 1200/800/H800 mm -Weight: 115 kg

Condition: ready for operation (used), functionality: fully functional, Beach cleaner: Rcjdpfst Rgknox Ab Tsf Beach cleaner: - Legiret Geomonier - Type 028L - Trailed variant - Tractor attachment - fully galvanized - Working width 250cm - jockey wheels - Rake - sieve Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: good (used), Vibratory feeder, vibratory feeder, vibratory feeder, feeding device, spiral conveyor, vibratory filler, vibratory spiral conveyor, vibratory dosing unit, feeding technology, feeding device, storage container with automatic feeding Rjdpfx Abjb A Iv Ns Tjcf -Automated feeder with storage container -The device was built for the production of electric clamps. -Dimensions: 1300/1400/H1200 mm -Weight: 260 kg

Condition: good (used), Year of construction: 2010, • Brand: Erdwich • Type: M700/1-900 • Year of construction: 2010 • Machinenumber: 2036 • Engine power: 22,0 kW • Single axle • Hydraulic slide The shredder has been completely serviced at our workshop and fitted with a new sieve bedholder. We currently have 2 sizes of sieves in stock. These sieves are suitable for reducing paper to 20 or 25 mm. Rcjdpfx Absvmzkxe Tef

Condition: good (used), Container, granule container, storage tank, powder container, storage tank, color powder container Rcsdjp E H Aijpfx Ab Tsf -Container: Stainless steel container with sieve insert -Capacity: approx. 500 liters -Strainer: Ø 10 mm -Container contents: color powder -Dimensions: 1070/860/H950 mm -Weight: 201 kg

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 9825, The 2024 general overhaul includes, among other things, the die head, hydraulic nut, bearings, main shaft, oil pump with filter, and synthetic oil. Only the steel housing is older but is in excellent condition. The images of the production line in the hall date from before the overhaul. The individual images of the Amandus Kahl pellet press show the condition after the overhaul. TECHNICAL DETAILS Motor power: 110 kW Sawdust capacity: 2.5 – 3 t/h Biomass capacity: 3 t/h Bran capacity: 3.5 – 4 t/h Straw capacity: 2 – 2.5 t/h L/D ratio: 3.67:1 MACHINE DETAILS Dimensions of press (W x H): 1,450 x 1,900 mm Diameter of press: 2750 mm Insertion depth: 6 mm Press length: 22 mm Year of manufacture of motor: 2024 Year of manufacture of cooler with sieve: 2015 Year of manufacture of conveyor belt: 2015 Year of manufacture of feed screw: 2015 EQUIPMENT Amandus Kahl C35-780 pellet press with base plate New 110 kW electric motor Electric control cabinet with emergency stop Complete electrical documentation Conveyor belt Sieve system with automatic cooling Hydraulic nut Die head Electrical wiring Metering screw for product feed Automatic metering system for filling 4 additional dies, 6 mm 60 liters of additional synthetic oil 7 new bearings 2 new wear rings Rjdpfx Ajzaricsb Tscf 1 new air filter 2 new oil seals 1 new oil filter 1 new oil pump 20 liters of 800/460 synthetic oil 1 new thrust piece (main shaft) Documentation of overhauled and renewed parts

Condition: good (used), Grinding media, ceramic grinding media, polishing media for vibratory finishing machines, vibratory finishing machines, vibratory finishing machines, vibratory finishing machines, continuous vibrators Redpfx Aoink Tisb Tecf -Manufacturer: Rösler, Ceramic grinding wheels type RS 40/40 2 bags -Contents: 25 kg/bag -Price/Sale: complete -Transport dimensions: 400/380/H400 mm -Total weight: 50 kg

Condition: good (used), Cylindrical vibrator, tumbling facility, tumbling machine, mass finishing cylindrical vibrator, tumbling facility, continuous vibrator, vibration conveyor, oscillating conveyor, conveyor trough, spiral conveyor Redpoitv Dbofx Ab Tocf -Round vibrator: with soundproof hood, small waste water system with spray device -Manufacturer: CETEMA, round vibrator type TM 500A -Working container: elastically mounted -Total volume: 500 liters -Outer diameter: 1450mm -Working basin width: 430 mm -Working basin height: 510 - 580 mm -Machine for: deburring, polishing, rounding edges -Dimensions machine: 1570/1430/H1140 mm -Dimensions of waste water system: 1010/520/510 mm -Total weight: 1450 kg

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: 2031306, type of input current: three-phase, overall weight: 9,200 kg, Roller mill from Bühler, previously used in cornflakes production. Pre-installed are a metal detector and a vibratory channel. Control cabinet is included. Weight of the roller mill approx. 9,200 kg. Rcjdpfx Asxgq Rksb Tef

Year of construction: 2015, condition: used, machine/vehicle number: AM 04153555, Model: VPB 500 1x Sieve diameter (mm): 500 Number of decks: 1 Screening area (m2): 0.22 Motor (kW): 0.20 – 0.23 Centrifugal force (kg): 590 INDUSTRY: Food industry, recycling, chemical and plastics industry, metal powder. - Versatile vibrating screening machine Rcsdpfxsyyl Rhj Ab Tef - All contact parts made of stainless steel - Mounted on wheels - Standard motor

Condition: new, functionality: fully functional, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS4 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very sturdy drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in just a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom Redsupiapjpfx Ab Tjcf - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 400 hydraulic motor with up to 1,600 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: used, functionality: fully functional, Klockner chipper 120x400 H-2WT - German production - shafts in very good condition Redpfethfm Ujx Ab Tocf TECHNICAL PARAMETERS: inlet width 400 mm inlet height 120 mm two knives rotor diameter 420 mm power of main motor 30 kW feed motor power 2 x 2,2 kW bottom shaft pulling toothed top pulling toothed shaft sieve fi 20 mm feeder length 2600 mm transport dimensions (length / width / height) 300 / 245 / 170 cm weight 1500 kg

Condition: like new (used), - made in Germany - new knives and counter-knives TECHNICAL PARAMETERS: - feeding dimension 520x1000 mm Rcjdpfx Aoqy Ek Hsb Tjf - motor power 80 kW - four rows of knives - counter knife - sieve 20 x 20 mm - sieve dimension 1000 x 900 mm - rotor diameter 600 mm - rotation of shaft 830 rpm Overall dimensions of the machine 235x170x290 cm weight ~ 4000 kg

Year of construction: 2007, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile Rcsdozn H Syspfx Ab Tof -Type: G15035-SOLO -Drive motor: 2.2 kW -Inlet cross-section: 300 x 245 mm -Outlet: 360 x 200 mm -Sieve: Hole size 5 mm -Quantity: 1 cutting mill available -Dimensions: 630/590/H1095 mm -Weight: 158 kg

Condition: new, Year of construction: 2026, operating hours: 5 h, functionality: fully functional, machine/vehicle number: MP2506992, input voltage: 400 V, total width: 960 mm, total length: 1,060 mm, total height: 2,250 mm, pressure: 200 bar, overall weight: 675 kg, stroke length: 200 mm, control voltage: 24 V, input frequency: 50 Hz, power: 2.2 kW (2.99 HP), pressing force: 6 t, Hydraulic Clinch Press Miller MP645E, with optional vibration conveyor and automatic feeding tool for the installation of self-clinching studs, nuts, stand offs and other fasteners. Technical data: Press force 2-57KN (6 ton) Throath depth 450mm Zylinder stroke 200mm Travel speed 110mm/sec. Cycle time 3sec. 1200/hour Size H 2250mm x W 960mm x D 1060mm Weight ca. 675 Kg Electrical connection 400V, 2.2 KW  Berghof PLC control system Redpfxeztcykj Ab Tecf  In-house programming  Automatic press force adjustment with counter; position-based  Memory for up to 1,000 parameter sets and 200 programs  Electronic and mechanical safety system with distance monitoring  Safety electronics by MURR & EATON  Safe processing of conductive and non-conductive materials  Linear length measurement system  Electronic (indirect) press force measurement  Proportional valves for electronic press force control  Peripherals and digital I/O by Beckhoff  Made in Germany; in-house service support Optional  Tooling set with 14 or 33 punches and dies  4-station die holder with position sensor; parameters for each of the 4 stations can be selected individually and stored in the program  Vibratory feeder for automatic transport of press-fit elements  Singulation and feed unit for automatic processing of clinch fasteners  Length measurement of automatically fed press-fit studs or bushings  Force/displacement diagram displaying the most recent press-fit data  Custom requirements—such as program selection via barcode scanning, production data output, etc.—can be programmed in-house  Adaptation to handling systems or robots possible; communication via PROFIBUS, PROFINET, EtherCAT, or Modbus We are happy to answer any questions you may have; on-site visits are possible by appointment. Guaranteed, lasting reliability through the use of high-quality components Simple handling and short changeover times Low maintenance and service requirements Very flexible due to the large number of possible applications Automatic feeding system, touch screen control etc. optional available Energy-saving, solid design with the energy efficiency of a hydraulic system Electronic and mechanical safety system for 100% safe processing of conductive and non-conductive materials Connection to the usual power supply (400V) Processing of all common press-in elements thanks to high press-in force, press-in nuts up to M12, threaded bushes up to M10, threaded bolts up to M8 Continuous adjustment of the press-in force, repeatability +/-1%

Condition: used, Year of construction: 1991, total length: 1,660 mm, total height: 1,470 mm, total width: 1,100 mm, Colour: Grey Empty weight: 1.300 kg - Year: 1991 - Documentation available: No - CE certificate present: No - Serial number: 500-1014 - Main motor power [kW]: 18.5 - Rotor width [mm]: 600 - Opening width [mm]: 600 Rcedpfx Abowu Uy Io Tjf - Opening length [mm]: 800 - Sieve perforation [mm]: 15 - Number of rotating knives [pcs.]: 1 - Transport dimensions: 1660mm x 1100mm x 1470mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, weight 1350 kg diameter 1760 mm height 1240 mm 0 1210 l Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. These type of machines have large screen area and allow easy separation of work pieces from the grindstones. Optional Accesories Rcsdpfoyk Ilbox Ab Tof - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: new, Year of construction: 2023, weight 390 kg height 1000 mm 0 204 l length 1300 mm revolutions per minute 1500 U/min voltage 380/50 V/Hz engine output 1,6 kW The VKT-200 is a linear vibratory finishing machine and is used for the surface treatment of parts made of all types of metallic and non-metallic materials. Rcsdpfoy S Dn Nex Ab Tsf The machines in this series are generally used for long and large-volume parts. With the help of movable partitions in the machine, sensitive parts can be processed without being damaged by friction from other parts. Optional accessories - Pneumatic sound insulation hood - Speed control - Dosing pump - Magnetic valve - Electrical control panel stand - Rinsing water pipe system The pictures are for orientation only. The optional accessories can be surcharge. Gerd Wolff reserves the right to change the colour and technical data of the machines. The VKT 200 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye.

Condition: refurbished (used), functionality: fully functional, Frewitt MG-803 Oscillating Sieve Mill / Granulation Machine – Fully overhauled & refurbished (Pharmaceutical standard) Condition: Used, 100% completely overhauled and refurbished. Area of application: Pharmaceutical, chemical, and food processing industries. Material: Stainless steel (1.4305 / GMP-compliant). Description & Highlights: For sale is a highly precise Frewitt MG-803 oscillating sieve and granulation machine. As part of a comprehensive mechanical and electrical overhaul, the unit was completely disassembled, professionally repaired, and reassembled. It is in like-new, flawless condition, both visually and technically. Key features of the overhaul: Mechanical rebuild: All components (fixed and moving bearing head, connecting rod drive, guide units) were completely disassembled, ultrasonically cleaned, de-rusted, and reassembled. 100% renewal of all wear parts: Bearings: All tapered roller bearings, cylindrical roller bearings, and linear bearings are new. Seals: All radial shaft seals and Garlock seals have been completely replaced. Fasteners: Newly manufactured articulated screws made of stainless steel (1.4305). Overhauled electric motor & gearbox: The drive was completely disassembled, newly lubricated, newly sealed, sandblasted, and coated with protective paint at a specialized company (Heblo AG). Pharmaceutical-grade surface finish (Ra ≤ 0.8 µm): All stainless steel surfaces in contact with the product were professionally ground and polished by the specialist company Devo Tech AG to meet the stringent hygiene and GMP requirements for pharmaceutical and chemical applications. Mobile & Electrostatic Safe: New, conductive and lockable swivel casters for safe use in cleanroom/pharmaceutical environments. Increased operational safety: Optimized and newly manufactured stainless steel pin actuation for the safety sensor of the machine door for reliable door monitoring. Technical data & equipment Manufacturer: Frewitt Model: MG-803 Type: Oscillating sieve and granulation machine Design: Mobile stainless steel frame with brake Scope of supply / components: Infeed and outlet hopper (stainless steel) Rotor, sieve, and sieve basket unit with side guide rails Complete drive and connecting rod system Protective cover and safety sensor Condition & function test: After assembly, the machine underwent a complete function test. It runs extremely quietly, vibration-free, and is ready for immediate use. Documentation: Original operating manual, drawings, and a test report for the complete overhaul are available. Price: On request. Location / inspection: Possible by appointment. A demonstration run on-site can be arranged. Redpfszu Tu Iex Ab Tjcf