Used Wood-Mizer Complete Sawmill (Mobile) for sale (23,216)

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Logs Wagon - Trolley - BONGIOANNI Technical Details : Year - 1997 Wagon length - 7 m Number of staples - 4 Eqipment Consisits : 1- Wagon - trolley 2. El. Cabinet Klodpfx Aherx Rq Ej Ajw 3. Comand pult 4. Hydraulic drive

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 001, cutting length (max.): 5,000 mm, Offered is an automated side board processing line with singulation, trimmer for cutting to length, 2 stacking machines, additional discharge, and cutting of stacking slats: Boards 2000-5000 mm long, 16 - 40 mm thick, 70 - 200 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: Kljdpsy Uzhfjfx Ah Ajw - Cross transfer of boards with a 4-strand chain cross conveyor - Singulation steep conveyor 6000 mm wide, 3000 mm inclined - Aligning roller conveyor - Chain cross conveyor as a layer former - Star turner and sorter before the trimmer - Edge detection (ALFHA edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates: without re-cutting, 5000 mm into stacking machine 1, alternatively: without re-cutting, 4000 mm into stacking machine 1 with re-cutting, 4000 mm into stacking machine 2 with re-cutting, 3000 mm into stacking machine 2 with re-cutting, short lengths for discharge into a box with re-cutting, short lengths for discharge into a box with re-cutting, 2 or 3 x 101 cm for stacking slats with re-cutting, 2 or 3 x 101 cm for stacking slats or waste cut - cutting length 505 mm for the underlying vibration chute - 2 stacking machines: 1 x 2500 to 5000 mm and 1 x 2000 to 4000 mm - automatic lowering of the finished packages and onward transport to the automatic strapping station - FROMM strapping with 16 mm plastic band and automatic onward transport to the discharge roller conveyor - ALFHA control with Siemens S 7 - ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, with side boards of 4000/17 x 76 mm, one employee produced, packaged, and strapped approximately 15,000 boards in 9 hours. The system is still assembled, but the upstream chipping system has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without problems.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 10,100 h, functionality: fully functional, type of input current: three-phase, cutting length (max.): 8,000 mm, overall weight: 19,500 kg, cutting height (max.): 800 mm, input current: 250 A, input voltage: 400 V, saw blade width: 500 mm, main saw diameter: 500 mm, Equipment: cabin, centralized greasing system, scorer, - Log circular saw, fully functional - max. log diameter 800 mm, max. length 6 m, individual pieces up to 8 m - max. timber size 180/180 mm, in wide board mode 310/180 mm - automatic timber sorting Kledpsyc Ncrefx Ah Ajw - price includes log feeder, 2x outfeed conveyors, and 1x sorting conveyor

Condition: used, Year of construction: 2001, functionality: fully functional, We offer for sale complete sawmill technology from the sawmill operation. The technology will be available from October 2026. This is a functional and operational assembly suitable for sawmill operations, log processing and related woodworking production. Offered machines and technologies ARTIGLIO ST 130 band saw (2001) including log conveyor price: 4,500,000 CZK ARTIGLIO CONDOR 1000 trolley (2012) ARTIGLIO Canter / milling machine (2012) TOS PWR 402 sweep saw (2006) price: 180,000 CZK PAUL KME 2-750 plastering saw (2014) price: 750,000 CZK STÖRI MANTEL FLS 170 format saw (2011) rear prism feed price: 500,000 CZK Baljer & Zembrod milling debarker (2010) including bark conveyor price: 1,250,000 CZK Dřevostroj Čkyně underbench crosscut saw (2001) price: 80,000 CZK wood waste cutter SG Sušice 55 kW (2023) Klodpfx Ajzagrxeh Asw including input and shaker conveyor price: 600,000 CZK rolling mill for saw blades PRIMULTINI (2001) price: 50,000 CZK saw blade grinder DROSTE VENOM (2019) price: 400,000 CZK More information possibility of selling individual machines and complete technology technology is still in operation possibility of inspection by prior agreement more detailed technical information, photos and dismantling date on request

Condition: as good as new (ex-display), Year of construction: 2015, functionality: fully functional, saw drive: 380 W, PRIMULTINII SIF 1600 band saw, in very good working condition. Ksdpeyha A Tofx Ah Aslw

Condition: used, Year of construction: 1970, functionality: fully functional, Complete, fully operational sawmill line for sale due to restructuring. Kljdpjx E Sn Defx Ah Ajw The entire system can also be purchased in individual components. Price upon inspection.

Condition: used, Year of construction: 2000, functionality: fully functional, all sawmill equipment Kjdpoydvpzefx Ah Aslw head saw, edger, log conveyor system, dust extraction system, saw sharpener

Condition: good (used), Year of construction: 1994, Complete sawmill: Loading system + bandsaw 1100, blade 130 mm + hydraulic log carriage model EO 700 + 1 outfeed Ksdsy Iuuxepfx Ah Aolw

Condition: used, Year of construction: 2000, functionality: fully functional, Trolley with belt for 1500 cm saw, log loading ramp, and 8 m board conveyor with retention. Saw motor 37 kW. Kljdpexvpd Ijfx Ah Asw

Condition: used, Year of construction: 2004, functionality: fully functional, cutting length (max.): 8 mm, Equipment: cabin, Complete Artiglio log saw with Eagle 1100/I carriage. It has been maintained by Artiglio in 2018. It is in excellent condition. Klodpfx Ahsv Sr U Ej Ajw

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Esterer full-frame saw, model HDS 600, year 1990. Passage width 735 mm, stroke 600 mm. Includes switch cabinets, operator control panels, and drive motor. The machine fits on the foundation of the HDS 700. Can be inspected at Scheibner GmbH, 36110 Schlitz. Klsdpfermmqzsx Ah Asw

Condition: new, Technical specifications: Length: 6 m Length of cut log: 1000 – 4200 mm Main motor: 7.5 kW Diameter of processed log: 1000 mm 600 mm band saw guide wheels Frame made of 160 mm C-profile Band saw length: 4800 mm Band saw width: 40-50 mm Electric up and down drive Feed via a gear motor, continuously controlled by an inverter Support arms x 5 Saw hoist: Hydraulic ADDITIONAL EQUIPMENT Hydraulics: Log loading x 1 Drag arm team Log leveling system x 1 Log press x 1 Chain turner x 1 Kledpfjwavqlox Ah Aew Hydraulic power unit: 4 kW Optional equipment: Board drop system Microprocessor cutting thickness controller ISP-10 Bark cutter/debarker Bed extension Motor: 11 kW 15 kW / 18.5 kW Electric roller Additional manual pressure Driver's seat Operator platform Desktop-stationary Additional hydraulic components / Log press / Chain turner / Powered leveling / Leveling / Loading Double-sided head lifting chains 2x16B Hydraulic accumulator Water solenoid valve Extendable support arms Loading ramp Head drive from two sides

Condition: used, Year of construction: 2007, 4 profiling units VPF340 2x90 kW Ksdpfx Ahey Adl No Aolw New subframe LINCK centering system VZM LINCK extraction unit CSA

Condition: good (used), banana feed conveyor Kodpfxsyzup Ae Ah Aslw

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, Complete Sawmill with Carriage Bandsaw and Edger including conveyors 4 Headblock Log Carriage - 1200 mm Fully Hydraulic Bandsaw - 1+2 Edger Klodpfx Ajy I A H Aoh Aew

Year of construction: 2018, condition: ready for operation (used), This MAYPRO LC2 was manufactured in 2018. It features an industrial PC with proprietary software, PLC integration, and can produce up to 2,000 pallets per 8-hour shift. Minimum and maximum pallet dimensions are 600 mm x 600 mm and 1,500 mm x 1,500 mm, respectively. It includes an automated wood feed system, multi-head nailing, and an integrated stacking system. Total installed power is 20-40 kW. Contact us for more information about this machine. Application Types Klsdpox Hlh Tofx Ah Aow Complete Production

Condition: excellent (used), Band sawmill consisting of: - Tension carriage EWD EW 1000 - Band saw EWD EBB 1400 - Roller conveyor for transporting the sawn goods (manufacturer SPRINGER) - Raised cabin - Tracks - Control cabinets - Accessories Optionally with complete sharpening room equipment: - Sharpening machine Vollmer CAL 200 - Upsetting machine Vollmer PMH - Flanking (leveling) machine Vollmer EMS Log band saw EWD Esterer EBB1400 Vertical band saw for round wood Roll diameter: 1400 mm Roll width: 200 mm Saw blade width: 206 mm Saw blade thickness max. 1.47 mm Blade speed max. 55 m/s (winter & summer drive pulley available) Main motor: 55 kW The roller crowning was reground in 2009 Band saw carriage EWD Esterer EW1000 hydraulic tensioning carriage Year of manufacture 1991 4 tensioning blocks with 3 log turners tensioning block opening max. 1000 mm hook opening max. 930 mm total length: 6000 mm total width: 2450 mm total height: 1750 mm track width 1300 mm The band sawmill was bought second-hand in 2004/2005, reinstalled by Esterer, but never put into full operation as cutting is almost exclusively done with the gang saw. The band saw has only run for 500 operating hours since 2004! very good condition - available immediately - can be demonstrated by appointment Sharpening room equipment: 01. Vollmer CAL 200 sharpening machine Year of manufacture 2000 Tooth feed from the left CNC machine for grinding cutting and block band saw blades with straight grinding and wet grinding Kljdpfx Ajvtwzmjh Asw Full enclosure with extraction for CBN and corundum grinding wheels Incl. 2 Borazon grinding wheels 10mm 02. Vollmer PMH upsetting machine Saw upsetting machine for band saw blades Max. blade thickness 3.5 mm 03. Vollmer EMS flank/leveling machine Leveling machine for upset band saw blades converted to self-drive in combination with CAL 200 incl. limit switch on the saw clamping! Further details: The sharpening machines were purchased second-hand in 2007 and stored covered on pallets or wooden structures in a dry, heated garage. Because the band saw was never put into full operation, the sharpening room equipment was repeatedly postponed, so that today the machines are in the same condition as when they were delivered. All operating instructions, descriptions and circuit diagrams are neatly enclosed in a box. In 2018 and 2023 the machines were cleaned of surface dust outside, lightly oiled with graphite spray and stored in the garage again! immediately available - fully functional - very good condition Location: Austria, near St. Pölten

Condition: used, For sale: BRENTA industrial log bandsaw with Progress log carriage Heavy-duty BRENTA industrial log bandsaw (bandsaw / frame) including Progress log carriage, from a professional sawmill. Technical data - log bandsaw Ksdpfx Aex Ndphoh Ajlw Manufacturer: Ateliers de Construction Louis Brenta SPRL (Belgium) Model: ETYELEC Machine serial number: 406341 Motor power: 60 HP (approx. 44 kW) Speed: 340 RPM Bandwheel diameter: Ø 1,400 mm Condition Bandwheels and frame overhauled and ground approx. 1 year ago New bearings on the bandwheels Runs smoothly Progress log carriage Heavy-duty industrial design Mechanical roller conveyor with chain drive

Condition: excellent (used), -1 Horizontal block bandsaw Hänni with tensioning carriage approx. 8 meters Roller diameter 1200 mm incl. accessories - Frame saw system Bögli, passage 700 mm - Tensioning carriage, hydraulic with auxiliary carriage - Split wedge Mara, driven - Powered roller conveyor, length 6 meters / total length approx. 12 meters - Vollmer automatic gang saw sharpener - Manual setting tool for teeth Ksdpfxoyr Dbuj Ah Ajlw - Sharpening machine for CV saws Vollmer - Waste carriage / 2 electric cranes and various accessories. Can also be dismantled at additional cost.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 09001M, type of input current: three-phase, cutting length (max.): 10,000 mm, overall weight: 50,000 kg, cutting height (max.): 700 mm, total length: 38,000 mm, input current: 125 A, Complete sawmill with chipper and debarker, including sawdust turbine. For sale: a complete and fully operational KARA Master sawmill—an efficient and robust solution for professional timber processing. The sawmill operates on a 125 Amp electrical supply and is fully functional. It can process logs with diameters up to 70 cm and lengths of 10-11 meters. The sawmill features fully adjustable thickness settings along a rail system, allowing you to pre-set various cutting thicknesses as required. Cutting depth ranges from 13 mm up to 315 mm, enabling production of everything from thin boards to heavy beams—precisely and efficiently. Klodjxz Eg Nopfx Ah Aew The system is equipped with a debarker to protect the saw blade and ensure clean, uniform cuts. For handling residual materials, a chipper is included to facilitate the easy and practical disposal of wood waste. Finished timber can be sorted into three separate stacks, promoting an organized and streamlined workflow. This machine is ideal for larger sawmills and timber companies seeking high-capacity and flexible production. Disassembly and transportation of the sawmill is the responsibility of the buyer. Estimated transport dimensions are 12.5 x 2.5 x 3 meters (L x W x H) per truck, with a total of 3-4 truckloads anticipated.

Condition: ready for operation (used), Year of construction: 2003, A sawmill is for sale. The Linck line is equipped with new automation from the Finnish company OT-Laite, manufactured in 2016. The Linck line speed is 100-120 m/min. It is operated by a single operator. Linck EV45 infeed turning device Chipper canter 1 Linck VM 50 Klodpfjxg Ubyex Ah Aew Chipper canter 2 Linck VM 50 Scaner before profiling Lisker Profiscan / Seecon / ProfiTC. automation is made 2016. There is a room with all the necessary sharpening equipment Profiler group 1 Linck VPF340 , for 2 + 2 side boards Linck side board saw/ circular saw. 4 spindle Mechanisation for the removal of side boards Profiler group 2 Linck VPF 340 , for 2 + 2 side boards Linck resaw, max. cutting height 285 mm Transport to timber sorting Capacity: 400 m³ of sawn timber in 8 hours. line is 500 v and including transformer

Condition: new, HORIZONTAL BAND SAWING MACHINE A 1200 BIG 150 Successor of A-1200 PLUS In addition to the functionality of its predecessor, the A 1200 BIG 150 is significantly larger, which results in increased performance. It is used for longitudinal cutting of wood in the form of beams, square timbers and planks. Thanks to its design, it can be operated by one person, which is now a valuable advantage of every industrial machine. Fittings: Length of the log cut: individually to the needs of the recipient Diameter of the processed log: 1500 mm Guide wheel of the bandsaw: 600 mm Band saw: length: 61500 mm Width: 40-50 mm Main engine: 15 kW Electric lifting up / down Smooth feedrate control Hydraulic tension of the saw Average efficiency: 1-1.5m3 / hour (Depending on the size of the log) In addition, the A 1200 BIG 150 can be equipped with: Klsdpfeu Sg A Uex Ah Aow increasing power to 18.5kW or 22kW electrically moving roller bark cutter SELBIT ISP-10 microprocessor cutting thickness controller operator seat stationary desktop plank discharge bed extension Hydraulics: Hydraulically raised retaining arms loading of the log leveling holdfast chain rotator leveling with hydraulic drive hydraulic aggregate 5.5kW

Condition: new, ✔ Band sawmills ✔ Multi saws ✔ Edge cutters ✔ Milling machines for pallet boards ✔ Wood cutters Why Boldrew? ✅ Over 30 years of experience in the industry ✅ Professionalism and precision ✅ Customer service in Europe, America and Africa We invite you to cooperate! Mobile band sawmill TS-1200 H Mobile band sawmill TS-1200 H Innovative technology for woodworking professionals The mobile band sawmill TS-1200 H is a technologically advanced machine designed for efficiency, precision and reliability. Thanks to its mobility and modern hydraulic solutions, the machine will meet the expectations of even the most demanding users. --- Technical data ·Length of the cut log: 100–820 cm Kledpsvvw R Tofx Ah Aew Track bed: 6 meters, with an additional 4 meter long hydraulically folding segment ·Diameter of the processed log: up to 950 mm ·Band saw guide wheels: Ø 600 mm Band saw: ·Length: 4800 mm ·Width: 40-50 mm ·Main engine: Briggs & Stratton Vanguard V-Twin 35 HP combustion engine ·Generator: 8 kW to power additional components ·Head lifting system: Double-sided chain drive 16 B ·Feed control: Stepless adjustment for maximum control ·Saw tension: Hydraulic ·Debarker for the first log preparation ·ISP 10 cutting thickness gauge ·Electrically operated roller ·Adjustable Angle supports (load capacity 600 kg each) ·LED lighting, ideal for working in different conditions --- Advanced hydraulic kit The efficient hydraulic system allows easy and quick handling of the logs: ·Hydraulic support arms - stabilization of the log during cutting Log loading - 2 individual cylinders for operator comfort ·Wood leveling - 2 adjustment points ·Log pressure - 2 points for precise clamping ·Chain turner - 2 points, facilitates handling of the log ·Hydraulic motor: 8 kW Briggs & Stratton combustion engine with efficient hydraulic pump Mobility and durability Mobile axle: Double ALKO with brake and height-adjustable drawbar Construction: Solid and resistant to difficult working conditions Transport: Easy thanks to mobile chassis and compact dimensions Advantages of Trak A-1200 M 1. Versatility: Ability to cut large logs with different diameters and lengths 2. Mobility: Perfect for working in sawmills and directly in the field 3. Efficiency: Fast and precise cutting thanks to modern hydraulic systems 4. Operator comfort: Intuitive controls and ergonomic solutions

Condition: like new (used), Very well-preserved, almost as-new KÄLIN grinding/planing machine. Year of manufacture 2009/2010, Type Caster IPC 6.000. The machine is in excellent condition and comes complete with all motors and accessories for the production of up to a maximum of 6 tons/hour of grinding wood. The system includes a Siemens S7 control, grinding equipment and grinder type SL 800, along with all planer heads and a set of spare cutter heads. Extraction system and complete conveying technology for chip transport are included. The machine has been professionally dismantled and is ready for immediate pickup. Storage location: Southern Germany. Inspection is possible at any time. Klsdpfx Ahoykmlme Aew Sale by customer order.

Condition: used, functionality: fully functional, The primary breakdown section of the saw line is available for sale. The package includes a Heinola (Ahlström) chipper canter and a quad band saw (BM1500), together with centering, infeed, and outfeed conveyors. The equipment is offered as a complete, fully operational solution. Ksdsyka Nropfx Ah Aolw