Used Woodtek Wood Stack 1500 for sale (12,448)

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Iasdpfx Aol Nbqcob Njt Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Condition: used, Electric chain hoist, electric hoist, crane GIS type 150 / F serial no.: 1502802 year of construction 1981 lifting capacity 1500 kg hook path 4 meters Main hoisting speed 4 m/min. Fine lifting speed 1 m/min. - Electric trolley with one speed for double T-beam - 2 load lines Ijdpfx Ajgi E Evsb Nsat good condition

Condition: excellent (used), Year of construction: 2006, x-travel 750 mm y-travel 210 mm z-travel 1150 + 100 mm control Fanuc MSX-701III Maximum turning diameter 660 mm Iasdsy Spuujpfx Ab Njt Max. turning length 1498 mm Diameter over cross slide max. 400 mm number of spindle speeds 3000 U/min tool piece magazine with 40 Plätzen turret 10 Fach total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz Iedpfsr R Ewlex Ab Neat - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: used, Steel stacking bin 1000x800 mm – robust storage bin with closed walls 135 liters This 1000x800 mm steel stacking bin is a compact and sturdy solution for storing and transporting goods within warehouses, workshops, and industrial environments. Thanks to its robust construction and practical design, this steel storage bin is Iaedpfoy R Stdox Ab Njt

Condition: used, Steel stacking bin 1200x800 mm – collapsible storage container with flap 650 liters Iodpfxjy R St Do Ab Nsat This 1200x800 mm steel stacking bin is a robust and space-saving solution for storing and transporting large volumes of goods. Thanks to the combination of a stackable and collapsible construction, this industrial storage container is ideal for

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request contact: Mr. Ralf Schulz Iaodpfxoy Sz I Tj Ab Net

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,300 kg, total length: 1,640 mm, total width: 1,200 mm, total height: 1,750 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 30, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Recycling shredder, wood shredder, chipper, shredder MHR630 proline The MHR proline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These ready-to-connect shredders offer high performance, low energy consumption, and excellent value for money. This makes these chippers ideal for craft businesses, recycling companies, and industrial enterprises that are looking for an economical and high-performance solution. Isdpoy S Dc Tefx Ab Noat Advantages: - Continuous, uniform shredding process - High performance with low energy consumption - Robust design - Larger feed opening - Excellent value for money - Reinforced gearbox - 2 knife rows (30 knives total) - Selectable screen size - Ready to connect - Siemens PLC controlled - MHR630 proline Rößler recycling shredder – “Made in Germany”

Condition: defective spare-parts repository (used), fuel type: electric, overall weight: 2,465 kg, suspension: steel, Equipment: cabin, HEK GTP Dual 1500 – Transport Platform / Material Hoist Isdpfoy R Ruyex Ab Njat Compact construction hoist from HEK Manufacturing BV with a lifting capacity of 1,500 kg and a maximum lifting height of 120 m (anchored). The platform (4,000 x 1,600 mm) accommodates 2 to 7 persons when used as a transport platform. As a material hoist, it is designed exclusively for goods transport. Power requirement is only 32 A (slow-blow). Equipped with a comprehensive safety system, including centrifugal brake, overload protection, and emergency brake release. Complies with Machinery Directive 89/37/EEC. Diagnostic available via display on the platform. Speed: 12 m/min (transport) / 24 m/min (material) Anchoring distance: 6–8 m Motor power: 2 x 4.8 kW / 400 V / 50 Hz

Condition: new, Year of construction: 2024, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity Ijdpfx Ajd Hkqhjb Nsat The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: used, functionality: fully functional, Year of construction: 2002, coil weight: 1,500 kg, coil width: 425 mm, mandrel diameter: 508 mm, turntable diameter: 1,500 mm, Load capacity: 2x 1500 kg Floor to center of mandrel: 1090 mm Outer diameter of stop: 1500 mm Mandrel length: 425 mm Mandrel nominal diameter: 508 mm Coil limiting rings: both sides Braking: pneumatic, brake disc/caliper Iodpfx Asy Slp Ujb Noat Mandrel expansion: threaded spindle with socket wrench Locking of rotary bearing: foot pedal Operated flawlessly in customer’s production until dismantling. Control system not included. We can support you with integration through: Planning Mechanical overhauling Control system assembly Painting Safety concept CE documentation

Condition: used, Year of construction: 2008, functionality: limited functionality, power: 150 kW (203.94 HP), nominal heat output: 250 kW (339.91 HP), heating capacity: 220 kW (299.12 HP), Fixed-bed wood gasification plant from Urbas. The system is operational. Scope includes engine and generator. The engine requires an overhaul. Also included is a valid EEG feed-in contract at 21.6 cents/kWh until 2028. A comprehensive stock of spare parts, such as side channel blowers, sensors, and pumps, is included. A second unit is provided as a parts donor. Iodpfxoyyzv Ts Ab Noat

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Iaodpfox Twcpjx Ab Njt

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We offer you the following: Manufacturer: DMG MORI Model: NTX 3000/1500 Year of manufacture: 2023 Control: DMG Mori Celos with Fanuc F31iB5 Technical specifications: Max. turning diameter: 670 mm Turning length: 1,519 mm Bar capacity: max. 102 mm Travels: x1-axis: 675 mm y-axis: +/- 150 mm z1-axis: 1,562 + 164 mm b-axis: +/- 120° a-axis: 1,542 mm x2-axis: 200 mm y2-axis: +/- 40 mm z2-axis: 1,542 mm Main spindle: Max. speed: 3,000 rpm Drive power: 30/25 kW Torque: 1,194/995 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 111 mm Counter spindle: Max. speed: 4,000 rpm Drive power: 18.5/18.5/15 kW Torque: 599/505/409 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 91 mm Milling spindle: Speed range: 0 – 12,000 rpm Drive power: 28/23 kW Torque: 132/95.3 Nm Tool holder: Capto C6 Number of tool stations: 76 positions Max. tool diameter: Ø 70/Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Turret: Number of tool holders: 12 positions Speed of driven tools: 12,000 rpm Tool holder: BMT40 Torque: 16.9 Nm Rapid traverse speeds: x-axis: 50 m/min y-axis: 40 m/min z-axis: 50 m/min a-axis: 36 m/min x2-axis: 25 m/min y2-axis: 18 m/min z2-axis: 40 m/min b-axis: 100 rpm Iasdjy Sfx Nopfx Ab Njt Operating hours: approx. 4,500 h Spindle hours: approx. 2,200 h Technical features & accessories: − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-400-128 incl. hollow clamping cylinder for main spindle − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-260-78-3Z incl. hollow clamping cylinder for counter spindle − Foot switch for chuck operation − Automatic clamping stroke monitoring of the clamping cylinder for main and counter spindle − Tailstock function for counter spindle − Magazine-side control panel for the tool magazine − Coolant: water-soluble coolant − Chip conveyor (right discharge) − Coolant temperature control/coolant chiller − Coolant spray gun − Float switch for coolant − Coolant shower at main and counter spindle chucks − Compressed air blow-off system for chuck (counter spindle) − Oil mist separator zeroGOF #2 − Oil separator − ICS 70 bar, TMF300 band filter system, 980 l tank − Manual tool presetting device for main and counter spindle − Direct measuring system in x1, x2, y, z1, z2 axes − Spindle sensor measuring system with wireless signal transmission, manuf. Renishaw RMP600 − Universal filter − 3D quickSET − Cycle Alternating Spindle Speed − Cycle "Tailstock Tip at Turret" − Cycle MPC – Machine Protection Control − Cycle MVC – Machine Vibration Control − Synchronous thread cutting without compensating chuck − Increased input resolution to 0.0001 mm − Cs control for tool spindle − Program restart Accessories, illustrated tools, and clamping devices are only included if specified in the additional information. Technical data and details subject to change, errors and prior sale excepted!

Condition: used, empty load weight: 4,390 kg, maximum load weight: 13,610 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2018, suspension: air, tire size: 275/70 22,5, tire condition: 80 %, color: black, Year of construction: 2018, operating hours: 171,224 h, mileage: 171,224 km, front tire size: 275/70 22,5, rear tire size: 275/70 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference No. for inquiries: 69815 Doll, Tandem * Year of manufacture: 2018 * ABS (Anti-lock Braking System) * Duomatic air connection * 15-pin connector * Suspension: Air * GVWR: 18,000 kg * Unladen weight: 4,390 kg * Payload: 13,610 kg * Permissible total weight: 18,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 80%|80% -- 80%|80% - Tire size: 275/70 R22.5 * Tire condition 2nd axle: 70%|70% -- 70%|70% - Tire size: 275/70 R22.5 * Tire sizes: 275/70 R22.5 * Manufacturer: BEFA Belziger Fahrzeugbau * Wabco Smartboard * 50 mm towing eye * Coupled from above * Short timber trailer with 4 bolsters, equipped with ExTe stakes * 3x protective bolsters * Steel frame cover * Wabco Smartboard, 171,000 km Disclaimer: Subject to change, prior sale and errors excepted. More photos and videos available on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Handling of all (export) documents * Provision of export / customs plates Iajdpfx Aboyz Ihfs Nst * Vehicle preparation: new tarpaulins, lettering, painting etc. * Professional loading / load securing * TÜV approvals, registration service * Transport of commercial vehicles Please contact our trained staff – we will be happy to advise you.

Year of construction: 2021, condition: good (used), functionality: fully functional, Geda mast 1.5 meters, trailing cable guidance, Comfort landing door on each floor, carriage with speed-dependent safety catch device. Iodpfey Sn Efex Ab Neat

Condition: good (used), Make: Keilinghaus Type: PLS 1500 HY Specifications Metric US Standard Max. blank / workpiece over bed 3000 Max. blank / workpiece in the gap 5000 Ø Centre height over bed 1500 mm Distance between centers 2600 mm Maximum sheet thickness 15 mm Iodpfekvnnkex Ab Nsat Stroke X-Axis 1000 mm Stroke Y-Axis 2800 mm Speedrange 240 Rpm Power 75 kW Spindle taper head stock DIN 55027 - Size 15 DIN / Camlock Stroke pinole quill 1200 mm Dimensions (Estimate) Length 10000 mm Width 8000 mm Height 4500 mm Weight 60000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, total length: 5,179 mm, table length: 1,800 mm, table width: 650 mm, total width: 3,345 mm, rapid traverse X-axis: 28,000 m/min, rapid traverse Y-axis: 28,000 m/min, rapid traverse Z-axis: 28,000 m/min, table load: 1,500 kg, overall weight: 7,500 kg, X - Travel: 1500mm Y - Travel: 800mm Z - Travel: 500mm Table Length: 1800mm Table Width: 650mm Table load: 1500 Feed rate X-Axis: 28000mm/min. Feed rate Y-Axis: 28000mm/min. Feed rate Z-Axis: 28000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13.5kW Speeds / ranges: 8000Rpm ATC / revolver: 24 Isdpfxjyhph Ej Ab Nsat Coolant through spindle / Bar:10 Number of controlled axis: 3 Chip conveyor: yes Coolantsystem: yes Length: 5179mm Width: 3345mm Height: 2595mm Weight: 7500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2008, turning length: 1,500 mm, turning diameter: 420 mm, Manufacturer: MAZAK Type: QTN 350 II MY Control: Mazatrol Matrix Nexus Year of Manufacture: 2008 Specifications Metric US Standard Max. Turning Diameter 420 mm X-Axis Isdpswaikxjfx Ab Neat 257 mm Y-Axis 152 mm Z-Axis 1607 mm Spindle Bore 102 mm Speed 3300 rpm Spindle Power 30 kW Tool Changer 12-Speed Driven Tool Power 4000 rpm Driven Tool Power 7.5 kW Quill Mount 5 Mk Quill Stroke 200 mm Dimensions (Estimate) Length 5000 mm Width 2100 mm Height 2200 mm Weight 8600 kg Please note: The information on this page has been compiled to the best of our knowledge and belief, and where possible, by the manufacturer. This information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend that you review all important details.

Condition: good (used), total height: 300 mm, total length: 3,980 mm, total width: 1,500 mm, Manufacturer: STOLLE Type: Cast Iron Specifications Metric US Standard Length: 3980 mm Width: 1500 mm Height: 300 mm Number of T-slots: 6 Spacing between T-slots / pitch: 250 mm T-slot size: 35 mm Weight per plate approx.: 4,700 ton Number of matching pieces: 2 Dimensions (Estimated) Length: 3980 mm Width: 1500 mm Iodpfxswp Dbde Ab Noat Height: 300 mm Weight: 4700 kg Please note: The information on this page was provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not represent a representation or contract terms. We recommend you check all important details.

Condition: good (used), total length: 4,700 mm, total width: 1,500 mm, plate height: 355 mm, Manufacturer: ASQUITH Type: SDT Year built: 1990 Specifications Metric US Standard Length: 4700 mm Width: 1500 mm Height: 355 mm Number of T-slots: 6 Distance T-slots / pitch: 250 mm T-slot size: 34 mm Number of matching pieces: 2 Dimensions (Estimated) Length: 4700 mm Width: 1500 mm Height: 355 mm Weight: 5400 kg Iedpfswp Erwsx Ab Noat Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, you will not find any representation or contractual conditions. We recommend that you check all important details.

Condition: good (used), travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, Manufacturer: CME Model: MH-700 Control: HeidenHain TNC430 Year of manufacture: 2004 Chip conveyor High pressure coolant 25 Bar ATC chain 60 positions Optional magnetic table clamping system Auto index head 1 deg. Specifications Isdpfx Aswpkq Eob Neat Metric US Standard X-axis 7000 mm Y-axis 1200 mm Z-axis 1500 mm Table length 8200 mm Table width 1050 mm Table load 25000 Spindle power 30 kW Spindle speed 5000 Rpm Tool holder 50 ISO/Bt/Mk Milling head auto-index 1 x 1 ° Dimensions (Estimated) Length 12500 mm Width 5000 mm Height 4000 mm Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute a representation or contract terms. We recommend verifying all important details.

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,300 mm, travel distance Z-axis: 1,500 mm, Manufacturer: SORALUCE Type: FS 8000 Control: HeidenHain iTNC 530 Year of manufacture: 2006 ATC Chain 40 positions Max. tool size Ø 125 x 400 mm Machine prepared for rotary table Chip conveyor Central lubrication Stroke with vertical head rotated 3300 mm Specifications Metric US Standard X-Axis 8000 mm Y-Axis 2800 mm Z-Axis 1500 mm Spindle power 30 kW Spindle speed 5000 Rpm Tool holder 50 ISO/Bt/Mk X - Axis feed 15000 mm/min. Y - Axis feed 15000 mm/min. Z - Axis feed 15000 mm/min. Milling head auto-index 2.5 x 2.5 ° Dimensions (approximate) Length 17500 mm Width 4050 mm Height 5020 mm Weight 38400 kg Iodpfjxc Emxex Ab Noat Please note: The information on this page was provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contractual terms. We recommend that you check all important details.

Condition: good (used), overall weight: 2,800 kg, total length: 1,500 mm, total width: 1,000 mm, total height: 900 mm, Manufacturer: CORREA Type: Box Table Year of manufacture: 2006 Specifications Metric US Standard Number of T slots: 8 Pitch from T to T: 150 mm T dimension: 22 mm Number of T-slotted sides: 2 Dimensions (approx. estimate) Length: 1500 mm Width: 1000 mm Height: 900 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend you verify all important details. Iajdpfxjwp Dn De Ab Njt

Condition: good (used), Year of construction: 1980, 4-jaw chuck Length: 1500 mm Width: 500 mm Iaedowry Ixspfx Ab Not Height: 1500 mm Weight: 900 kg