Used Żefam Drsd-80 for sale (16,744)

Condition: good (used), Year of construction: 2019, functionality: fully functional, Baler Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Nedpfx Akjy Avhcouelb Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data are based on manufacturer information. We do not accept any liability for the stated data or possible errors. This offer is subject to change without notice, prior sale, and revocation at any time. Inspection is possible by appointment. The sale is ex works, against advance payment, without warranty or guarantee.

Condition: used, Technical details: plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm distance between columns: 920 mm Number of Straightening rolls: oben 4x unten 4x Stück / pieces roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t dimensions L x W x H: 3,8 x 2,2 x 2,1 m This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Roller support Infeed height 1400 mm Hydraulic system equipment Operated externally Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. Nodpfevgbgaox Akuelb *

Condition: used, Technical details: plate width: 800 mm Nlsdpju Ic Avefx Akueb coil weight: 12 t sheet width - max.: 800 mm sheet width - min.: 300 mm thickness of strip/band: max. 5,0 mm band speed: 4,5 / 25 m/min work height max.: 1700 mm Payload: 12,0 to (Coil) Weight approx.: 7,3 + 6,62 t dimensions of coil: 3,2 x 1,9 x 2,7 m dimension machine xH: 2,5 x 2,6 x 2,45 m Decoiler with loading device Can optionally be sold together with stock no. 0100571. straightening unit: Infeed rollers: 2 x Ø 144 x 850mm Straightening rolls: 3 x bottom rolls, rigid, Ø 100 x 850mm, 30mm adjustable 3 x top rollers, Ø 110 x 850mm; 30 mm adjustable Coil unwinding machine: Outer Ø 1.500mm Strip width max. 800mm Load capacity max. 12 to Clamping Ø 470 - 630 / 570 - 730mm Transport unit LxWxH: 1700 x 1500 x 1000mm; crosswise running, with prism support 1000 x1000mm Machine will be offered and sold with Stock no. 0100521 as a decoiling and streightening line. *

Condition: used, Technical details: pressure: 80 t dayligth: 600 mm ram stroke: 200 mm pressure: 30 t dayligth: 680 mm ram stroke: 300 mm distance between columns: 1060 mm base plate surface area: 1060x600 mm table above floor: 720 mm ram stroke speed: Stößel/ Ram 1: 40 mm/sec ram stroke speed: Stößel/ Ram 2: 95 mm/sec Nlodpsu Nfnwjfx Akuob base plate surface area: Dm=150 mm total power requirement: 13 kW weight of the machine ca.: 4,5 t space requirement approx.:: L:1,6xB:1,1xH:3,4 m - Press with two ram with 30 t + 80 t - foot control - documentation *

Condition: good (used), Working area Maximum turning diameter 400 mm Maximum turning length 5000 mm Swinging diameter over bed 840 mm Swinging diameter over carriage 530 mm Nlodpfxoy Ug U Do Akujb Spindle speed 14.6 – 1250 rpm Drive power 18.5 kW Dimensions 8.0 × 1.9 × 1.7 m Weight approx. 6.3 – 8.2 t

Condition: good (used), Geared motor, electric motor, electric geared motor -Manufacturer: VEM, Geared motor type ZG3 KMRA 80 G 6 -Speed: 31.5 rpm Nodpfx Aoh Ezffekuelb -Power: 0.55 kW -Design: B3 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Number: 1x motor available -Price: per piece -Dimensions: 485/205/H235 mm -Weight: 25 kg/pc.

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan -Fan: Blower, radial fan -Type: 2-stage -Motor: ASEA 0.4/0.1 kW 1390/690 rpm -Fan wheel: 2x Ø 200 x 80 mm -Inlet connection: Ø 160 mm -Output connection: 190 x 180 mm Nsdpfx Akjy Tt Iheuelb -Dimensions: 815/590/H400 mm -Weight: 33 kg

Condition: used, mileage: 315,050 km, power: 80 kW (108.77 HP), fuel type: diesel, gearing type: mechanical, first registration: 04/2012, next inspection (TÜV): 05/2028, emission class: euro5, color: white, number of seats: 8, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, * €7,700 net * Volkswagen Crafter 2.0 TDI 80 kW L2H2, 8 seats, cruise control, air conditioning, Euro 5 * Seats (7+1) * Tribus conversion * 6-speed gearbox * Radio CD * Driver airbag * USB * Electric windows * Electric mirrors * Central locking * Automatic climate control * Start/stop system * Cruise control * ABS * ESP * Wheelbase 367 cm * Kerb weight: 2,420 kg * Payload: 780 kg * Gross vehicle weight: 3,200 kg * Passenger car registration * Vehicle no. 19 TIMING BELT REPLACED: 192,293 km Nledoxf Sxaepfx Akuob OPENING HOURS Monday - Friday from 09:00 to 17:00 (by appointment...) CONTACT DETAILS Phone: WhatsApp: Email: Transit and export license plates available on request. Subject to errors and prior sale. Technical data and equipment details are to be verified separately. The contractual condition is only as viewed and expressly confirmed in writing at the time of purchase. Please arrange an appointment...

Condition: good (used), CNC control, power supply, switching power supply, controller, control unit, Promodul -Manufacturer: AEG, control unit Nsdpfx Ajy Tlduokuolb -Type: LOGISTAT CP 80-A04.1 -Dimensions: 485/130/H170 mm -Weight: 5.3 kg

Condition: good (used), Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 630 x 6.4 mm -Inner diameter: 80 mm -Bolt circle: Ø 120 x 22 mm -Number of teeth: see photo -Quantity: 2x saw blades included Price: per piece Nedpfxsw Au Egj Akuslb -Weight: 10.6 kg

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, operating hours: 45,000 h, pressing force: 80 t, stroke length: 30 mm, table width: 780 mm, table length: 880 mm, ram plate width: 650 mm, ram plate length: 800 mm, Equipment: CE marking, documentation/manual, Balconi press 80 tons strokes 100-400 adjustable stroke 30 mm Nlodpsy Ulbvjfx Akusb distance between columns 350 mm machine weight 15,000 kg optionally available with a soundproof cabin and a feeding line with an 800 mm SARONNI shear.

Condition: used, Year of construction: 2026, consisting of: machine base, 2 rotary spindles, SIEMENS Sinumerik S7-1500 control system (see photos), 1 RITTAL SK3185830 control cabinet cooling unit, 1 machine base plate (stored outdoors). Nlsdpfxoy T N Abj Akusb

Year of construction: 2022, condition: used, machine/vehicle number: S100/80.1, Machine weight approximately 2,300 kg, consisting of: machine base body, industrial articulated-arm robot KUKA Cybertech-2 KR 16 R1610-2, year of manufacture 2022, serial number: 1305737, KUKA controller KR C4, serial number: 3085496, operator panel, 3D scanner PHOTONEO PhoXi L, serial number: 2018-02-010-LC3, controller SIEMENS Simatic Panel Touch. Nlsdpfey T Nz Rjx Akujb

Condition: used, mileage: 149,171 km, power: 316 kW (429.64 HP), first registration: 01/2019, fuel type: diesel, overall weight: 35,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 05/2028, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, Internal vehicle number: G400135 German vehicle On its way to our yard in Kaufungen - Kassel, immediately available More INFO via Luis Lucena Mercedes-Benz AROCS 3543 8x4 Euro 6 CIFA MK25 1,032 operating hours Year of manufacture: 2018 CIFA MK25H-80-RH-PB607EPC Very good condition! Financing Example: * Internal number: G400135 * Purchase price: €144,900.00 * Down payment: 10% * Term: 60 months * Monthly installment: €2,250.02 * Final residual value: €26,380.00 If this offer suits you or you would like it tailored to your needs, please contact us (Mr. Enchev). Nljdpfjy Dyxusx Akueb We look forward to your call. Errors and changes excepted. We are happy to take your used vehicle in part exchange. Financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2026, volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Nljdoy S Ru Ajpfx Akueb Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2015, operating hours: 1,300 h, lifting height: 4,700 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Still RX70-80 diesel forklift, year of manufacture: 2015, hours: 1,300h!, previous owner: German Armed Forces, rated lifting capacity: 8,000 kg, lifting height: 4,700 mm, duplex mast, hydraulic sideshift, fork positioner, full cab, fork length 2,400 mm, diesel engine: [80 kW / 109 hp], weight: 13,600 kg, in good condition, ready for immediate use! On request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! Power steering, cab = Further information = Lifting capacity: 8,000 kg Nedpfxey T Uv To Akujlb Overall height: 280 cm Please contact Tobias Ebert for more information.

Condition: like new (used), functionality: fully functional, Year of construction: 2020, MECO Keyseating machine in very good condition 'LIKE NEW'. It was only used very occasionally since the installation in the second half of 2020. Set of tools included (which specific tools, is to be discussed) Z-axis travel 410 mm Y-axis travel (+) 132 mm Rotation speed W-axis 5 RPM Rotation angle W-axis 360° Maximum operating torque 1.3 kNm Machine weight 1320 kg Nlodpfx Ajy S Ta Iokujb Max workpiece diameter on table 800 mm Full technical specifications in the attached document. Spectacular keyseating machine with three useful axes in interpolated mode, which enable it to perform multiple notches and complex grooves. Its precision allows it to work in limiting tolerances. Also, with the use of special blades, complex internal and external toothed edges and cuts can be made. The incorporation of an automatic indexing table leaves a 410mm (height) gap of useful space. Cutting capacity from 3 to 100 mm (pieces up to approx. 800 mm diameter). A lower guiding bar provides extra stiffness for demanding jobs. Includes an automatic rotary indexing table with a wide range of configuration possibilities. Maximum workpiece height: 410 mm. PLC with touch screen to control cutting speeds,feeding rates, and shifting of the workbench. This keyseater is suitable for the production of pieces with multiple notches, grooves or both; either inner and outer: straight and conical grooves and helical cuts in through or knockout holes. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, Year of construction: 2014, operating hours: 7,700 h, Equipment: all wheel drive, JCB 550-80 WM Year of manufacture: 2014 7,700 hours 4x4 all-wheel drive Lifting capacity: 5 tons Lifting height: 8 m Engine: 93 kW / 127 hp Weight: 11,250 kg German machine Please visit our website: ----German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/...?/... ... Roman We will gladly take care of your financing or leasing. EU sale: net price upon presentation of company documents and tax/VAT number. VAT deposit: €2,000 Our services for you: - Customs license plates - Export documents and EUR1 certificate - Worldwide transport - Accommodation options Nedeytl Ilepfx Akuelb - Transfer from Munich Airport or Passau train station

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total length: 1,840 mm, total width: 915 mm, total height: 914 mm, overall weight: 880 kg, 2x Apollo KRH-80/200-308CN Condensate Pumps and Spare Parts (Unused 2021) Nlodpjy Tcc Usfx Akujb 2x KRH-80/200-308CN condensate pumps L x W x H: 1840mm x 915mm x 914xx each Weight: 880kg each With spare parts Note: Sales are conditional upon the satisfactory completion within 24 hours of conditional sale of a Business Partner Due Diligence Check (BPDDC) and an End User Statement form (EUS) by the buyer, and, if the buyer is not the end user, for each end user.

Condition: good (used), Year of construction: 2017, - Cutting width (mm): 4300 - Cutting depth (mm): 4200 Nodpey Tm Dcofx Akuslb - Cutting height (mm): approx. 80 - Power (kW): 16 - Vacuum suction pads: included

Condition: used, Year of construction: 2007, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain Nledpfoyaci Tox Akujb turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° number of toolpositions 2x16 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,6 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Achse)

Condition: used, Year of construction: 2006, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 Nedjyackdopfx Akuolb power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° number of toolpositions 2x16 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,6 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Achse)

Condition: used, Year of construction: 2005, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 / 82 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° max. workpiecediameter 850 mm max. workpiece height 550 mm number of toolpositions 32 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool weight 8,0 kg change-time chip to chip 10 sec feed speeds max. 30.000 mm/min rapid traverse 30 m/min Accelaration 5 m/s² Nledjvn Ur Ejpfx Akujb total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 6,5 x 5,0 x 2,9 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Axis) - only 6.100h Spindle Hours

Condition: used, Year of construction: 2006, x-travel 800 mm y-travel 800 mm z-travel 800 mm Control iTNC 530 Heidenhain Max. rpm 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 / 82 Nm tool taper HSK A63 swivellable B: 0 - 190 ° swivle time 1,2 s table diameter 900 x 700 mm max. table load 1.400 kg rotatable C: 360 ° number of toolpositions 60 pos. tool taper HSK A63 change-time chip to chip ca. 5,0 sec rapid traverse ( X / Y / Z ) 60 m/min rapid traverse B: 30 m/min rapid traverse C: 30 m/min feed speeds max. 60.000 mm/min total power requirement 64 kVA weight of the machine ca. 14,0 t Nljdpfx Ajtqmmzskujb dimensions of the machine ca. 6,0 x 6,5 x 3,2 m 5 Axis CNC-Machiningcenter Universal DECKEL MAHO - DMU 80 P duoBLOCK - 5-axis simultaneous - Swivel-Milling-Head - Rotary-Table

Condition: used, Year of construction: 2002, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain Main spindle: turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 kW Torque 130 Nm tool taper BT 40 DIN 69872 work table: table surface area 1.250 x 700 mm max. table load ca. 500 kg table diameter 700 mm T-slots 11x 14 x 63 mm max. table speed 15 min/-1 tool magazin: number of toolpositions 32 (2x 16) pos. tool taper BT 40 max. tool diameter 80 / 130 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8,0 kg feeds: Nlsdpfjvn Ur Ssx Akueb feed speeds 20 - 15.000 mm/min rapid traverse 12 m/min total power requirement 30 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 4,0 x 3,0 x 2,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 T - 5-Axis - Rotary table in Fixed-Table - Retrofitting to SK 40 optionally possible!