Used Agrifon St-60 for sale (34,419)

Condition: used, Year of construction: 2007, ----Construction: Bomag tamper BT 60/4, year of manufacture 2007, weight 62 kg, base dimensions: 340x280mm, Honda petrol engine GX 100 / 2.5 KW Lhjdpfsvxpc Hjx Acfsk Sale only to businesses. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT AND ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice).

Condition: used, empty load weight: 8,450 kg, axle configuration: 3 axles, first registration: 09/2017, next inspection (TÜV): 08/2026, tire size: 385/65 R22.5-385/65 R22.5, Year of construction: 2017, mileage: 688,621 km, ref: 53416 Equipment: Ljdpfjy Tbm Sjx Acfohk * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Refrigeration unit, * Side impact protection, * Lifting odometer, * Toolbox: 1, * Spare wheel holder: 2, * Rear door design: Rear portal doors, * Locking rods on rear doors: 2, * Floor: Aluminum floor, * Double-deck system, * Double-deck beams: 22 VIN: WSM000005191373 Tire size: 385/65 R22.5 Width: 2.6m Height: 4m

Condition: used, empty load weight: 8,450 kg, axle configuration: 3 axles, first registration: 09/2017, next inspection (TÜV): 09/2026, tire size: 385/65 R22.5-385/65 R22.5, Year of construction: 2017, mileage: 653,112 km, Ref: W0013818 Equipment: * Double-deck beams: 22, * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Refrigeration unit, * Side impact protection, * Lifting odometer, * Tool box: 1, * Spare wheel holder: 2, * Rear door design: Rear portal doors, * Locking rods on rear doors: 2, Lodpfxjy Tbk Rs Acfjhk * Floor: Aluminum floor, * Double-deck system VIN: WSM000005186425 Tire size: 385/65 R22.5 Width: 2.6m Height: 4m

Condition: used, Year of construction: 1990, Max. punching force: 600 kN Max. shear force: 800 kN Punches 27 mm holes in 16 mm steel Cuts on the flat bar shear up to 400 mm with material thickness of 16 mm steel Hydraulic hold-down on plate shears Large support table on die side with stops Lhodpfxstmyifs Acfsk Further technical data on request With a range of punches and dies as desired Weight: approx. 2,000 kg

Condition: used, Max. punching force: 600 kN Max. shear force: 1000 kN Punches 20 mm holes in 19 mm steel Cuts on the flat bar shear up to 500 mm with material thickness of 12 mm steel Further technical data on request With a range of punches and dies as desired Very good condition Lhodpoq D E Tcjfx Acfok

Condition: used, Year of construction: 1990, Max. punching force: 600 kN Max. shear force: 800 kN Punches 27 mm holes in 16 mm steel Cuts on the flat bar shear up to 400 mm with material thickness of 16 mm steel Hydraulic hold-down device for a sheet metal shear Further technical data on request With a range of punches and dies as desired Weight: approx. 2,000 kg Lsdpfx Aem T Amuscfehk Very good condition

Condition: used, Max. punching force: 400 kN Max. shear force: 600 kN Punches 20 mm holes in 16 mm steel Cuts on the flat bar shear up to 300 mm to material thickness of 12 mm steel Further technical data on request With a range of punches and dies as desired Lhedjy Tldnepfx Acfjk Weight: approx. 1,500 kg

Condition: new, Year of construction: 2025, power: 72 kW (97.89 HP), motor manufacturer: Battery System: LIFePO4, Field of application: Construction Empty weight: 3.000 kg Generator capacity: 72 kVA Dimensions of cargo space: 160 x 110 x 160 cm CE mark: yes Frequency: 50 Voltage: 400 Drill equipment: Battery, Control Panel Ljdpfx Acouid Awsfehk Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel

Condition: new, Year of construction: 2025, fuel type: diesel, power: 48 kW (65.26 HP), motor manufacturer: Iveco FPT F34TE1PV, General information Field of application: Construction Functional Generator capacity: 60 kVA Dimensions of cargo space: 285 x 100 x 142 cm CE mark: yes Other information Generator: Stamford SL12-Y Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 140 l Production country: IT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank Ljdpfx Acownwcrefehk

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: MING2/3/4/5/6/7, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,000 mm, total length: 21,000 mm, total width: 2,150 mm, total height: 3,000 mm, axle spacing: 1,480 mm, load capacity per stand: 7,500 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 6,000 kg, Equipment: double-sided, Ohra - Double-sided cantilever rack, long goods rack, heavy-duty rack Consisting of 15 uprights + 60 cantilever arms Height 3.05m - Uprights IPB200 (HEB200) - Upright spacing 1.48m center-to-center Total depth 2.15m (double-sided) Arms 90cm - IPE100 Load capacity per outrigger 1000kg Upright load capacity 7500kg Wooden inserts can be supplied upon request. Six racks are available! 4 with 4 levels - 60 arms Ledev Smm Njpfx Acfjhk 2 with 6 levels - 90 arms + €2,000 surcharge Very good condition, see pictures A forklift is available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your zip code

Condition: as good as new (ex-display), Year of construction: 2025, Special price for trade fair machine *available upon request New: With the frequency converter option, up to a maximum of 45% can be eligible for government subsidies. Combination of: mütek briquetting press MPP 60 + dust extraction unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock; they only need to be connected. 1. Technical data of the briquetting press: Our best-selling briquetting press, a classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in use with satisfied customers + Excellent price-performance ratio Commodity code: 84793010 Briquet diameter: 50 mm Front socket: 50 mm Briquet stroke max.: 40 mm Briquet stroke opt.: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Lhedpjd Su Hxofx Acfsk Overall dimensions of the system: 2.2 x 1.1 x 2.8 m (L x W x H) Height - 2.8 m (special container) Delivery is also possible in 2 parts Weight: approx. 1200 kg, Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compactor Option: cooling of the press jaws: no Option: cooling of the hydraulic oil: yes Option: level monitoring: yes CE compliant 2. Technical data of the clean air dust extraction unit MMJET 350: Dust extraction connection diameter: 350 mm Motor: 11 kW Dust extraction nozzle on the left (when standing in front of the dust bin) Residual dust content:

Condition: as good as new (ex-display), Year of construction: 2014, functionality: fully functional, clint chiller for water cooling Lsdpfst Nhdtex Acfohk

Condition: new, TIGERMETAL WH60 – Hydraulic Workshop Press 60 Tons | Electric + Manual Pump Instead of €9,237 gross RRP, now only €5,899 net (€7,020 gross incl. 19% VAT). You save -24% compared to the RRP! The TIGERMETAL WH60 workshop press is a powerful and robust solution for demanding pressing operations in workshops and industrial environments. With a pressing force of 60 tons, the machine is ideal for straightening, pressing, and bending a wide variety of workpieces. Thanks to the combination of electric drive and manual hand pump, the press offers maximum flexibility: fast operation in automatic mode and precise fine adjustment for sensitive applications. The solid steel construction and the laterally adjustable cylinder allow versatile applications while ensuring high stability and safety. 🔧 Technical Data: Model: WH60 Manufacturer: TIGERMETAL Pressing force: 60 tons Drive: Electric motor + manual pump Motor power: approx. 2.2 kW Connection: 400V – 16A – 50 Hz Max. working pressure: approx. 265 bar Stroke: approx. 400 mm Working width: approx. 1000 mm Max. working height: approx. 1000 mm Weight: approx. 670 kg Advantages: ✔ Combined operation (electric + manual) ✔ High pressing force for industrial applications ✔ Precisely controllable pressure ✔ Laterally movable cylinder ✔ Durable, heavy-duty steel construction ✔ Integrated pressure gauge (manometer) ✔ Safety valve for overload protection ✔ Expandable with accessories (e.g. prisms, support plates) A wide range of additional workshop presses in various designs, sizes, and optional equipment is available! Some images may show a slightly different version than the one offered here. The version shown in some pictures may include an additional automatic function. Available versions: 30 tons 60 tons 100 tons 150 tons 200 tons Lsdjf Sqcrepfx Acfjhk 200 tons: on request Custom machines: on request New machine! We are also happy to manufacture a custom-built press tailored to your requirements. The pressure cylinder is mounted on a sliding carriage, allowing it to be moved sideways. This ensures optimal use of the maximum frame opening width. A demonstration machine can be tested on-site under power. ----- Please feel free to contact us – we will be happy to advise you without obligation. ----- The stated price is net plus 19% VAT. All information without guarantee! Worldwide delivery available! The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, fax, phone, messaging platforms). You will first receive a non-binding offer including our general terms and conditions as well as information on your right of withdrawal before any purchase/contract is concluded.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 280022, Schüco profile punching tool for facade series FWS50 and FWS60 with base frame Lhsdpfxoy R D Ake Acfek

Condition: good (used), Year of construction: 2008, functionality: fully functional, Automatic binding, stitching, and cutting machine (VSHRA), designed for serial production of brochures bound with wire staples. Working condition 4 automatic feeding stations for signature insertion. Lhsdpfxoyb Tcas Acfok Maximum trimmed format: 30.5 x 34.9 cm. Minimum trimmed format: 8.9 x 12.0 cm. No documentation available.

Condition: used, Year of construction: 2017, grinding range 600 x 300 x 400 mm magnetic plate size 600 x 300 mm distance spindle center to table 5500 mm max. table load 250 kg grinding wheel speeds 1.900 U/min longitudinal feed 680 mm cross travel 245 mm control STÖCKEL - ST-2 Surface Grinding Machine | STÖCKEL - FX 6030 ST-2 The machine is in good condition. Lhjdpfx Aeu Rt Tqecfok A machine video will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FX6030 | FX-6030 | FX6030ST | FX 6030 ST

Condition: new, axle configuration: 3 axles, loading space length: 10,636 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Chassis manufactured using a self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, component chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc brake 22.5" Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st + 3rd axles can be lifted separately with an assistance function (without central control unit equipment), 3rd axle additionally equipped with Optiturn, ECAS air suspension, tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, Alcoa aluminum rims DuraBright-11, 75x22.5 ET 120 kingpin screwed into a 10 mm thick plate Fifth Wheel Aluminum swivel landing gear, 2 x 10 tons support load, for air suspension, we use swivel feet Braking System According to E.G. standard, two-line braking system, EBS E-system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical System According to STVZO guidelines with 2 LED five-chamber lights type Aspöck Europoint LED integrated in the aluminum rear panel, 24-volt system with 1x 5-pole and 2x 7-pole socket, with side marker lights in LED design, 2 separate LED work lights at the rear, 2 LED work lights on the side starting at the 1st axle, at the height of the fifth wheel supports, 1 LED work light inside, at the front left, operated from the outside Body/Tipping Body "Body fully welded inside" Ljdpfx Acofakkcefohk Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross members, floor load approx. 7 tons/m2, cross members mounted at a relatively close spacing (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum swing doors, 50/30 mm thick, with 4 swivel rod locking mechanisms, attached in the welded aluminum rear frame in Teflon and stainless steel bearings, moving aluminum side wall suspended on the reinforced aluminum upper belt with "Kevlar liner for complete emptying, lateral brush seal and additional Kevlar liner on the side, integrated discharge chute with foldable cover plate in the floor end, operable from the outside, left rear, viewing window at the rear left, 1 sample slide in the rear doors, thus 2 pieces, service door at the front left Hydraulic System "Cargo Floor sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 670 PE-HD gliders, approx. 6mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed mountings on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed mountings, line size NW 21, fixed mountings with a size and design to be specified, operating pressure 190 max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operatio

Condition: used, Year of construction: 1985, round bar steel 45 mm square edge steel 40 mm L-beam 120 x 13 mm flat steel 500 x 12 mm punching pressure 60 t throat 510 mm 500 x 12 oder 400 x 16 mm punch diameter 27 in 17 mm punch diameter 39 in 12 mm oil volume 80 l total power requirement 7,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Lhsdpfxovg R Rze Acfok Electric 380 volt

Condition: used, Year of construction: 1984, round bar steel 45 mm square edge steel 40 mm L-beam 120 x 13 mm flat steel 500 x 12 mm punching pressure 60 t throat 510 mm 500 x 12 oder 400 x 16 mm punch diameter 27 in 17 mm punch diameter 39 in 12 mm oil volume 80 l total power requirement 7,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Lhedpsgvkmnofx Acfok Electric 380 volt

Condition: used, Year of construction: 1986, L-beam 120 x 13 mm hole punhing press: pressure 60 t hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm Lhedpet D Nz Ajfx Acfek shear: flat material 500 x 14 mm shear: flat material 400 x 16 mm shear: flat material 180 x 20 mm shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic Section Shear - Combined

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 4,769 h, load capacity: 5,000 kg, lifting height: 5,080 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,500 mm, fork length: 1,800 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: triplex Ljdpfxoyt Tiwj Acfjhk Transmission: automatic Condition: refurbished, without warranty Technical condition: very good Front tires type: non-marking Front tires condition: 80 - 100% Rear tires type: non-marking Rear tires condition: 20 - 40% Battery voltage: 80V Battery capacity: 930Ah Battery year: 2020 Description: Price includes new UVV (safety inspection). 4x superelastic front tires very good / rear will be renewed. The 2020 battery will be regenerated with a power cycler including Kappa test. Suitable charger with plug included. We are happy to organize cost-effective transport for you. Leasing with option to buy possible! Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heater, full cabin, full free lift, CE certificate, Mini lever, overhead guard roof,

Condition: new, Year of construction: 2026, The ERBA Separation Conveyor YE-60 is designed for separating workpieces and grinding media. It can be used as a mobile standalone machine or in combination with other machines, such as the ERBA Turbo (centrifugal system). The separation bed can be quickly and easily replaced to suit various requirements. An optional frequency inverter can be installed, allowing stepless adjustment of the motor speed. The YE-60 can be equipped with many optional features to simplify the separation process, such as a magnetic separator for small parts, a wash nozzle, or a parts hopper. Technical Data: - Gross volume: 60 liters - Motor output: 0.3 kW - Weight: 140 kg - Screen area dimensions: 1,000 x 500 mm - Installation dimensions: 1185 x 540 x 575 mm (L x W x H) As an experienced partner, we provide you with expertise in all aspects of vibratory finishing. Together, we develop efficient solutions tailored to your optimal process results. Ledpjyq Rhrofx Acfshk All prices are net plus the currently applicable statutory VAT and shipping costs. The images may show the system including accessories that are optionally available and subject to additional charges. If you are interested, we look forward to hearing from you. We are happy to offer advice with no obligation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunication (e-mail, telephone, message portal). In the first step, we will send you a non-binding offer, together with information about our general terms and conditions with imprint and the right of withdrawal, before any purchase/contract is concluded.

Condition: new, empty load weight: 1,895 kg, maximum load weight: 705 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,760 mm, loading space width: 1,790 mm, loading space height: 2,010 mm, loading space volume: 13.7 m³, color: grey, construction height: 2,370 mm, working width: 2,330 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, unbraked, aluminium body / side door / 100 km/h / tailgate hinged door, * IMMEDIATELY AVAILABLE * incl. aluminium body / side door / 100 km/h / tailgate hinged door Body color: dark grey Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY - Gross vehicle weight: 2.600 kg - Unladen weight: 705 kg - Payload: 1,895 kg - Interior dimensions: 376 x 179 x 201 cm (L x W x H) - Overall exterior dimensions: 499 x 233 x 237 cm (L x W x H) - Loading sill height: 35 cm - Brake: yes - Support wheel: yes - Automatic - 100 km/h: included! - incl. vehicle documents Vehicle superstructure: - Floor: Anodized aluminium floor made of web profiles - Side walls/body: Anodized aluminium double-walled - Roof material: Full polyester - Chassis: Pullman2 independent suspension with coil spring and shock absorber - Number of lashing eyes: 8 pieces - Tailgate: Yes - Tailgate material: Aluminium anti-slip, approx. 500kg load capacity - Tailgate function: Hinged door and tailgate combination - Interior light: Yes, with switch - Supports: at extra charge - Overrun device & brakes: Incl. Frame/chassis: Welded hot-dip galvanized steel frame - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Double-walled and anodized aluminium side walls - Anodized aluminium floor - Full poly roof and front available in anthracite or black - Interior full height: approx. 190cm - Interior full width: approx. 179cm - Aluminum drive-on flap lockable with optional lock - Drive-on flap as flap/door system (can be used as flap or door) - Lashing eyes mounted on floor - Interior light - Torsion-resistant chassis - Sturdy cross members for high point loading - PULLMAN2 chassis Independent wheel suspension with trailing arm, coil spring and shock absorber lowered with very low centre of gravity and galvanized - 100km/h with manufacturer's certificate - automatic reversing - Knott overrun device and parking brake - sturdy V-drawbar - plastic mudguards - 13-pin plug - reversing light - large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - automatic center support wheel - body only splash-proof - registration papers: COC papers Special equipment included in the price: - Lockable front right side door, approx. 125x60cm Accessories can be retrofitted - please enquire: - Motorcycle rockers, - Motorcycle stand rails, - Motorcycle lashing straps, - Lashing straps - Additional lashing eyes - Slot-and-hole rails for lashing straps & locking beams - Rod strip with rubber coating for lashing straps & locking beams - Steel or aluminum locking beams - Interior lights - Reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Lhsdpfx Aceu Ht Srofok

Condition: new, empty load weight: 1,895 kg, maximum load weight: 7,050 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,760 mm, loading space width: 1,790 mm, loading space height: 2,010 mm, loading space volume: 13.7 m³, color: black, construction height: 2,370 mm, working width: 2,330 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, unbraked, aluminium body / side door / 100 km/h / tailgate hinged door, * IMMEDIATELY AVAILABLE * incl. aluminium body / side door / 100 km/h / tailgate hinged door Body color: black Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY - Gross vehicle weight: 2.600 kg - Unladen weight: 705 kg - Payload: 1,895 kg - Interior dimensions: 376 x 179 x 201 cm (L x W x H) - Overall exterior dimensions: 499 x 233 x 237 cm (L x W x H) - Loading sill height: 35 cm - Brake: yes - Support wheel: yes - Automatic - 100 km/h: included! - incl. vehicle documents Vehicle superstructure: - Floor: Anodized aluminium floor made of web profiles - Side walls/body: Anodized aluminium double-walled - Roof material: Full polyester - Chassis: Pullman2 independent suspension with coil spring and shock absorber - Number of lashing eyes: 8 pieces - Tailgate: Yes - Tailgate material: Aluminium anti-slip, approx. 500kg load capacity - Tailgate function: Hinged door and tailgate combination - Interior light: Yes, with switch - Supports: at extra charge - Overrun device & brakes: Incl. Frame/chassis: Welded hot-dip galvanized steel frame - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Double-walled and anodized aluminium side walls - Anodized aluminium floor - Full poly roof and front available in anthracite or black - Interior full height: approx. 190cm - Interior full width: approx. 179cm - Aluminum drive-on flap lockable with optional lock - Drive-on flap as flap/door system (can be used as flap or door) - Lashing eyes mounted on floor - Interior light - Torsion-resistant chassis - Sturdy cross members for high point loading - PULLMAN2 chassis Independent wheel suspension with trailing arm, coil spring and shock absorber lowered with very low centre of gravity and galvanized - 100km/h with manufacturer's certificate - automatic reversing - Knott overrun device and parking brake - sturdy V-drawbar - plastic mudguards - 13-pin plug - reversing light - large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - automatic center support wheel - body only splash-proof - registration papers: COC papers Special equipment included in the price: - Lockable front right side door, approx. 125x60cm Accessories can be retrofitted - please enquire: - Motorcycle rockers, - Motorcycle stand rails, - Motorcycle lashing straps, - Lashing straps - Additional lashing eyes - Slot-and-hole rails for lashing straps & locking beams - Rod strip with rubber coating for lashing straps & locking beams - Steel or aluminum locking beams - Interior lights - Reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Lsdpfeu Ht Slsx Acfshk

Condition: new, empty load weight: 625 kg, maximum load weight: 1,975 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,130 mm, loading space width: 1,670 mm, loading space height: 2,010 mm, loading space volume: 10.5 m³, color: black, construction height: 2,370 mm, working width: 2,150 mm, Hydraulics, automatic reverse drive, hot-dip galvanized, unbraked, aluminium body / side door / 100km/h / tailgate hinged door, * IMMEDIATELY AVAILABLE * with gross vehicle weight: 2600kg incl. aluminium body / side door / 100km/h / tailgate hinged door Body color: black Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: * IMMEDIATELY AVAILABLE * - Gross vehicle weight: 2,600 kg - Unladen weight: 625 kg - Payload: 1,975 kg - Interior dimensions: 313 x 167 x 201 cm (L x W x H) - Overall exterior dimensions: 445 x 215 x 237 cm (L x W x H) - Loading sill height: 35 cm - Brake: yes - Support wheel: yes - Automatic - 100 km/h: included! - incl. vehicle documents Vehicle body: - Floor: Anodized aluminium floor made of web profiles - Side walls/body: Aluminium anodized double-walled - Roof material: Full polyester - Chassis: Pullman2 independent suspension with coil spring and shock absorber - Number of lashing eyes: 6 pieces - Tailgate: Yes - Tailgate material: Aluminium anti-slip, approx. 500kg load capacity - Tailgate function: Hinged door and tailgate combination - Interior light: Yes, with switch - Supports: at an extra charge - Overrun device & brakes: 6 pcs. Frame/chassis: Welded, hot-dip galvanized steel frame - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Double-walled and anodized aluminium side walls - Anodized aluminium floor - Full poly roof - Interior continuous height: approx. 188cm - Interior continuous width: approx. 160cm - Aluminum drive-on flap lockable with optional lock - Drive-on flap as flap/door system (can be used as flap or door) - Lashing eyes mounted on floor - Interior light - Torsion-resistant chassis - Sturdy cross members for high point loading - PULLMAN2 chassis Independent wheel suspension with trailing arm, coil spring and shock absorber lowered with very low centre of gravity and galvanized - 100km/h with manufacturer's certificate - automatic reversing - Knott overrun device and parking brake - stable V-drawbar - plastic mudguards - 13-pin plug - reversing light - large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - automatic center support wheel - body only splash-proof - registration papers: COC papers Special equipment included in the price: - Lockable front right side door Accessories can be retrofitted - please enquire: - Motorcycle rockers, - Motorcycle stand rails, - Motorcycle lashing straps, - Lashing straps - Additional lashing eyes - Slot-and-hole rails for lashing straps & locking bars - Rod strip with rubber coating for lashing straps & locking bars - Steel or aluminum locking bars - Interior lights - Reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Lhedpfx Aju Htf Escfsk