Used Apfel Gmbh Schweißarbeitsplatz Für Rehm Und Fronius for sale (72,828)

Condition: used, Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punch punch -Shearing tool for T-steel: 120 x 70 mm -Square: 25 mm -Round: 27mm -Type: 50305 -Dimension respectively: 175/140/15 mm -Weight: 5kg Isdpfx Ahecwf Dcjzoaw

Condition: used, quick-change tool holder, tool holder head, quick-change tool holder, quick-change drilling tool holder, quick-change boring bar holder, quick-change turning tool holder -Quick-change tool holder: Quick-change boring bar holder -Recording dimensions: see photos -Number: 2x steel holders available Iodjuypzispfx Ahzjaw -Price: per piece -Dimensions: 115/55/H130 mm -Weight: 1.5 kg/piece

Condition: used, Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for square steel: 25/40/50 mm -Shearing tool for round steel: 25/40/55 mm -Type: 4412151064 -Type: 4412151063 -1x dimensions: 220/206/H30 mm Iasdpocwf Daofx Ahzow -1x dimensions: 215/205/H30 mm -Weight: 16 kg

Condition: ready for operation (used), Deckel Maho 2238-4630 rotary table SN: 0174 for FP4-60 machine – diameter: 63cm / height: 43cm, used, normal signs of wear, 100% functional, delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Ijdpfx Ajy Np Naehzjaw

Condition: ready for operation (used), Siemens SFN6024-1SC00-0AA0 / 1FN6024-1SC00-0AA0 SIMOTICS L secondary part for linear motor 1FN6; component: 3-phase synchronous motor; size 1FN6024, length 200mm; T-slot nuts included in delivery, used, normal signs of wear, 100% functional, scope of delivery as per photos. Iasdpfx Ahox Dv Tlszew

Condition: ready for operation (used), Siemens 1FN6024-1SC00-0AA0 SIMOTICS L Secondary part for linear motor 1FN6; Component 3-phase synchronous motor; Part no. 1FN6024 length 200mm; T-slot nuts included in scope of delivery, used, normal signs of wear, 100% functional, scope of delivery as per photos Iedot Rmzyjpfx Ahzeaw

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33802037879, empty load weight: 3,250 kg, maximum load weight: 34,750 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 6,790 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, available in multiple units Chassis, semi-trailer, container Fine-grain steel welded construction, kingpin plate with replaceable 2" kingpin Container fittings: 1 x 20 ft, flush at the rear Iaedpfxezbtnis Ahzow (Note: low drawbar load with 20 ft container) 24 tons, 2-speed landing gear, single-sided operation, with semi-circular base and straight connection plate, with stroke equalization 2 support wedges with holder Rear underrun protection, steel Spray flaps at the rear, covering the entire width Half-shell fenders with anti-spray flaps according to EC Storage box for fire extinguishers up to 6 kg Fire extinguisher (ABC powder 6 kg) incl. stainless steel drip tray in the center of the rear container crossbeam, approx. 290 mm wide Axles + Suspension BPW disc brake axles, with 430 mm disc diameter "Axles/chassis laser-aligned" - reduces tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport), up to 44 tons total weight Air suspension 1st axle, automatic lift axle, including forced lowering and start assist, activated by "pressing the brake pedal 3 times" (start assist is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Braking system 2-line pneumatic braking system Color-coded line routing for easy servicing Spring brake parking brake 2 tamper-proof coupling heads at the front, without connecting line 24-volt EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the dashboard in the cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5", manufacturer at the discretion of the manufacturer Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 1 x 15-pin socket at the front, without connecting cable Operating instructions The specified total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and drawbar loads. (Poor driving and handling characteristics possible due to incorrect load distribution) Country of registration/plates Germany with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-row license plate holder Warning sign "A" for waste transport, foldable ADR approval according to FL/AT with ADR warning sign at the rear Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame RAL 2011 traffic orange "10-year warranty against rust-through" Support feet black coated available in multiple units

Condition: good (used), Year of construction: 2000, machine/vehicle number: 1101188, GDW LZ 250 lead and feed screw lathe Year of manufacture: 2000 Iasdpox Slhdefx Ahzew Centre height: 125 mm Centre distance: 500 mm Spindle bore: 38 mm Spindle mount: DIN 55027/4 Tailstock taper: MK 3 Speed range: 60 - 3,000 rpm, stepless Weight: approx. 600 kg Dimensions: approx. 1,300 x 700 x 1,400 mm With collet chuck mechanism With Iskra digital readout

Condition: used, Year of construction: 1979, machine/vehicle number: 58, Rundegerät für Buchdecken / Rounding machine for book cases Schmedt PräRund Serial-No. 58 Online-Video-Inspection by Skype-Video Isdpetzc R Ejfx Ahzoaw We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 1960, functionality: fully functional, type of input current: AC, Melting furnace, 1960 - KF Arc Furnace_AC EAF 8 ton, 4 MW Iaedpfx Asvampgohzjw - Nominal capacity 8,0 t, output during production has been 6,0 - 10,0 t - Power transformer 4 MW Karhula Foundry has two molding lines and hand molding for large castings. Our melting capacity consists of 8 ton arc furnace and 8 ton, 1,5 ton and 0,5 ton induction furnaces. We have an 8 ton AOD (Argon Oxygen Decarburization) converter for metal treatment.

Condition: as good as new (ex-display), 1 x Fronius PT Drive manual welding torch for TPS 4000/5000 machines. 4,047,375.000. Compact Planetary drive. water-cooled. Neck can be supplied with additional cost. Un-used, selling off as old stock. Many other Fronius torches available. Please contact for details. Isdpstqu Nrsfx Ahzjaw Delivery not included.

Year of construction: 1995, condition: good (used), Reliable Dyno Industrier tray sealing machine, manufactured in Norway. Suitable for meat, fish, poultry, ready meals, cheese, and other food products requiring vacuum or Modified Atmosphere Packaging (MAP). Specifications: Model: DYNO 320VG / 321VG Vacuum + MAP (gas flush) capability Fully operational and currently in production Semi-automatic operation 4-cavity tray mold installed Film roll system included Original operating manual included Pilz control panel Well maintained and ready for immediate use Ideal for: Meat processors Seafood companies Delicatessen producers Ready-meal manufacturers Small and medium-sized food production facilities The machine can be inspected while running and demonstrated to serious buyers. Iajdpfx Aszkwd Sohzew Several molds are available.

Condition: excellent (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 4803, type of input current: AC, overall weight: 2,200 kg, total width: 2,600 mm, total length: 2,600 mm, total height: 2,300 mm, input voltage: 400 V, power: 5.5 kW (7.48 HP), input frequency: 50 Hz, A nearly new GKM KTS 2600 DS with less than 500 operating hours. This is a tumbling screen machine with a patented adjustment for the three-dimensional movement, allowing the dwell time for each product on the screens to be individually adjusted. The main shaft is driven by an electric motor and V-belt. Technical data: • Tumbling screen machine with a 2600 mm diameter and 5 screen decks • Inlet DN 300, outlet DN 300, stainless steel • Screen lifter for easy removal • Approximately 4000 silicon balls for screen cleaning for difficult materials • Motor 5.5 kW, 400 VAC, 50 Hz Ijdpfxezl U Uwj Ahzoaw • ATEX EXII-/3D Ex h IIIB T155°C design – Zone 20 inside, Zone 22 outside • Outlets are individually adjustable and adaptable • Installed screen sizes: 2 mm, 1 mm, 0.56 mm, 0.4 mm, 0.32 mm • Spare screens: 0.63 mm, 0.71 mm, 1.5 mm The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging on a pallet.

Year of construction: 2019, operating hours: 3,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10031325, This is a high-resolution NIR system capable of detecting particles in the 3 mm size range. Additionally, the machine is equipped with an electromagnetic detector that has a sensitivity of approximately 1.5 to 1 mm, depending on the metal type. Depending on the settings, it can sort positively or negatively. Technical data: Belt width: 1024 mm Nozzle bar: 6.4 mm working width Upon request, complete documentation can be provided. Iajdpfx Ahezl Uzwjzow The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Year of construction: 2020, operating hours: 2,500 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 26858, A complete set is available for sale. The set consists of the following units: Pellet press 33-390 – the dimensions can be found in the accompanying documentation. The throughput rate is up to 500 kg/h – depending on the material and material density. Drive motor 30 kW. The die has a size of 3.0 mm. Spare parts: 4 dies and 2 rollers Conveying system: Z-conveyor – bucket conveyor, track width 298 mm from Wiese Förderlelemte in cooperation with Amandus Kahl. 3400 mm horizontal at the bottom, 5300 mm vertical, and then 2340 mm horizontal. Dimension sheet included. Material cooler (Pos. 1): is a cylinder with a fan that blows ambient air into the cone, volume approx. 1 m³. Pellet sieve (Pos. 2) / screener manufactured by Gough Engineering for separation of fines, oversized pellets, and product classification. Screen size 3.2 mm. Ijdpfx Ahjzl Tlzszoaw Control cabinet: is included. The basic control system (without power electronics) is manufactured by Kahl and complies with CE regulations at the time of manufacture. The power unit is manufactured in Israel and may not comply with CE regulations. Both control cabinets will be supplied; commissioning and compliance with all regulations are the responsibility of the seller. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered ex-works at a port or at the production plant in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: used, functionality: fully functional, The separation is achieved through repeated fractionation on up to 5 longitudinally arranged, superimposed sieve decks, the inclination of which increases downwards. The sieve frame is driven by unbalanced motors. The installed sieve decks have the following sizes: 15-10-5-3-1 mm. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe. Isdpozl Sv Ssfx Ahzoaw The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,100 kg, rotor diameter: 700 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,400 rpm, power: 90 kW (122.37 HP), Equipment: rotational speed infinitely variable, This shredding machine is exceptional and highly innovative. The material to be processed is shredded particle by particle in 6 rows of small chambers, while simultaneously the particles are flung against the grinding surface. The combined effect results in a very fine grain size – and it is possible to dry the material being shredded at the same time. Keywords: Turbo mill, impact mill, eddy current mill. Depending on the material, the machine can shred to a particle size of less than 1000 µm to 5 µm. The throughput rate is between 100 and 900 kg/h, depending on the material. Ijdpfx Aezl Shzehzsaw The applications range from minerals, industrial products, powder coatings, chemicals, dyes to food and feed. The innovations of the machine are: • the plug-in connections for the wear tools (always in the same place with minimal tolerances) • rotation in both directions – this ensures that the tools are worn down evenly on both sides • conical design – allows the cutting gap to be adjusted precisely to 0.1 mm with only 12 screws. Technical data: • Drive power 90 kW – frequency converter (FU) is essential – frame size 90 kW with 150% overload for 60 seconds. • Speed up to 125 m/s • Tools: Rotor and stator made of hard metal, available in various degrees of hardness; ceramics are also possible. • Machine monitoring via bearing temperature measurement and vibration measurement included. • Control panel is not included. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe.

Condition: excellent (used), Year of construction: 2016, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 565697, type of input current: three-phase, input voltage: 400 V, belt width: 600 mm, conveyor belt width: 600 mm, The Wagner non-ferrous metal separator (NE separator), model 0429 from Wagner Magnete, is one of the manufacturer’s high-performance eddy current separators. Working width: 600 mm. • Throughput: depends on the material and grain size. • Rotor speed: up to 3,000 revolutions per minute. • Belt speed: 0.5 to 2.0 m/s. • Weight: 1.2 tons. • Rotor system: Eccentrically mounted with a high pole-changing frequency. • Rotor drive: 4 kW; belt drive: 1.5 kW. The machine and the associated control panel are included in the delivery. Iedezl Rfxspfx Ahzeaw The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or in the production facility. The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet.

Condition: ready for operation (used), Year of construction: 2010, RHV-C&V GmbH & Co. KG glass jar capper type: LW560 serial number: 10172/4184 Iasdpsyxgxwofx Ahzew year of construction: 09/2010 stainless steel conveyor belt, belt width: 120 mm

Condition: good (used), Year of construction: 2011, SynenTec Cellavista V 3.1 Cell Imager Manufacturer: SynenTec Model: Cellavista V 3.1 Resolution: Up to 0.35 µm at 40x magnification Magnification options: 2x, 4x, 10x, 20x, 40x Illumination: Brightfield and up to 6 fluorescence channels Camera: 8-bit progressive scan CMOS with a pixel density of 5440 x 5440 (29.6 MP) Sample types: Supports standard SBS plate formats (6, 12, 24, 48, 96, 384 wells), culture dishes and microscope slides Isdpfxswv Rayo Ahzoaw Throughput: Can expose up to 250 plates per day Automation: Fully automated with options for integration into robotic systems Voltage (U): 100 - 240 V AC 50/60 Hz Power (P): 295 VA max Manufactured: 01/2011 You can find more items - new and used - in our store! International shipping costs on request!

Condition: refurbished (used), functionality: fully functional, type of input current: AC, input voltage: 230 V, ground cable length: 3,000 mm, warranty duration: 3 months, type of cooling: air, hose package length: 8,000 mm, welding current at 60% duty cycle: 160 A, welding current at 100% duty cycle: 140 A, protection type (IP code): IP23, welding current (min.): 4 A, welding current (max.): 180 A, Rehm Tiger 180 HIGH DC – Used Pulse Tig DC Refurbished, tested, serviced and ready for immediate use 3 Months Warranty Specifications: 180 AMP 230 Volt 2/4 Step Pulse Down slope Gas post flow Spot lassen Program memory Iodpfozl Rzmex Ahzjaw Elektrode option Including: TBI SR9 8 Meter welding torch, earth cable, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 2005, condition: good (used), machine/vehicle number: 815 1015 1794, Manufacturer: CFS Germany GmbH Type: JuniorPak M420 Year of manufacture: 2005 Voltage: 400 V Phases: 3-phase + N + PE Current: 29 A Power: 20 kW Frequency: 50 Hz Weight: 2200 kg This is a thermoforming machine (deep-draw machine) for the production of vacuum-packed or MAP-packed food. It is designed for medium-sized production lines and is often used for meat, cold cuts, cheese, fish, and ready meals. How the JuniorPak M420 works 1. Bottom film feeding A roll of plastic film is mounted at the rear of the machine. The film is drawn forward using conveyor chains with grippers. Common materials: APET/PE PA/PE PP PET barrier film 2. Heating The bottom film enters the heating zone. Here, the plastic is heated to approximately: 90–140 °C, depending on the material type. The temperature is controlled by electric heating plates. 3. Deep drawing This is the machine's most important process. The mold closes. Then, usually: Iajdpfxszka Rue Ahzow vacuum is applied under the film compressed air is applied above the film, if required the film is drawn down into the mold The result is finished plastic containers or trays. The forming depth is determined by the mold. 4. Filling zone After forming, the process stops. Operators or automatic equipment place the product in the trays. Examples: meat burgers bacon cheese fish 5. Top film A new film is fed in from above. This lies over the product. 6. Vacuum/MAP The sealing chamber closes. The machine can: create a vacuum flush with gas seal directly In MAP, the following are often used: CO₂ N₂ O₂ The gas mixture depends on the product. 7. Sealing The top film is sealed to the bottom film. Sealing occurs with: temperature pressure time These three parameters are crucial for a tight seal. 8. Cutting The cutting tool cuts each individual package. Excess film is transported out as scrap. 9. Ejection Finished packages are transported out onto a conveyor belt. They can then: be labeled be weighed be checked with a metal detector be packed in boxes A JuniorPak M420 normally consists of: Frame made of stainless steel Film transport with chains Heating station Forming station Filling zone Vacuum/MAP chamber Sealing tool Cutting tool Ejection conveyor Vacuum pump Pneumatic system Hydraulics (on some models) PLC control with HMI Typical technical data For the M420 series, typical values are: Maximum film width: approx. 420 mm Forming depth: up to approx. 100–120 mm, depending on the tool Cycle time: 5–15 cycles/min Capacity: from a few hundred to several thousand packages/hour, depending on the product and tool Connection: 400 V 3-phase Power: 20 kW (as shown on the nameplate)

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 11.20 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelving consists of : - 05 x upright approx. 450 cm x 110 cm, pre-assembled. - 16 x crossbar approx. 270 x 14 x 5 cm, T30. - 32 x locking pins. - 32 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 36 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2450 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : Iajdpfxszlyr Uo Ahzew If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : - H : approx. 450 cm Iodpfxozlyrno Ahzsaw - D : approx. 110 cm - L : approx. 19.60 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelving consists of : - 08 x uprights approx. 450 cm x 110 cm, pre-assembled. - 28 x crossbar approx. 270 x 14 x 5 cm, T30. - 56 x locking pins. - 56 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 63 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 4.100 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: new, GALVANIZED PALLET RACKS FOR OUTDOOR USE Hot-dip galvanized pallet racks for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 16.80 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 007 x upright approx. 450 cm x 110 cm, pre-assembled. - 024 x crossbar approx. 270 x 14 x 5 cm, T30. - 048 x Locking pins. - 048 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 54 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 3550 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Iaedpfxezlyrbs Ahzjw Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.