Used Asea Contactor for sale (240)

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bdodpjh U Rzgofx Afwjg Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, Specifications: Bsdpfsx Sx Iqjx Afwodg Composed of 2 motorized 90° curved conveyors. Curve radius: 3 m at axis. Total deployed length: 4.80 m. Overall conveyor structure width: 750 mm. Varnished beechwood slats: 620 x 54 x 42 mm. Adjustable height from floor: 500–650 mm. Driven by chains and sprockets. Lateral guidance and lower return via slide rails made of synthetic material. Integrated drive gearmotor. Contactor-disconnector box. Emergency stop and isolator. Control cabinet with electronic frequency inverter operating both curved belts.

Condition: new, Year of construction: 2023, Alzmetall Alztronic i16 table drilling machine 5" touch display Condition: new Call us and ask us about special discounts or send us your request by email with your contact information and we will get back to you. 5" or 7" display with scratch-resistant glass surface - Optimal readability for the operator - Simple and uniform operator guidance using pictograms - Manual input of spindle speed - target value - Speed display - actual value - Integrated drilling depth display with touch zero point transfer (drilling start) - Virtual drilling depth scale in the display - Machine status displays and warnings in the display (safety)• Main switch, lockable - Right and left rotation through contactor control - Control voltage 24 V - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Spindle braking function - ALZTRONIC only (safety) - Adjustable display timeout Standard Equipment: -AC motor 230 V, 50 Hz -Infinitely variable speed adjustment -Reversing switch for right-left rotation -Spindle protection with electrical protection -On/off button with lockable emergency stop flap -Connection plug, cable length 3m -Paint: structural paint light gray RAL 7035, anthracite RAL 7016, white aluminum RAL 9006 Bdodpfjy S Atkjx Afwog Drilling capacity steel E335 (St 60) 16 mm Thread cutting steel E335 (St 60) M 12 Drill chuck taper MK 2 Spindle stroke 80 mm Thread 190 mm Column diameter 65 mm Manual feed Drill head height adjustment by handwheel Net weight approx. 83 kg Infinitely variable speed adjustment Motor 0.54 kW Spindle speed rpm 100-2000 Optional: - Röhm Supra drill chuck 1-13mm or 3-16mm - Alzmetall under-table For self-collection. Forklift available. Shipping also possible. Errors, changes and prior sale reserved. Other Alzmetall table drilling machines and pillar drilling machines always in stock!

Condition: good (used), Year of construction: 2001, Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Albright/Elektron, relay contactor -Type: SW201-3 -Voltage: 48 V -Number: 5x contactors available -Price: per piece Bjdpfxjy At Rue Afwjdg -Dimensions: 155/75/H80 mm -Weight: 1.5 kg/pc.

Condition: used, Contactor, semiconductor contactor, contactor Bsdpfxedngwgj Afwjdg -Power: 37 kW -Volt: 230 V. -Frequency: 50 Hz -Number: ´2x available -Price: per piece -Dimensions: 135/100/H142 mm -Weight: 3.5 kg

Condition: excellent (used), Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker -Manufacturer: Siemens, auxiliary switch unused, original packaging -Type: 3RH1921-1FA22 -Item No.: 3ZX1012-0RT02-1AA1 -Number: 6 switches available -Price: per piece -Cardboard dimensions: 65/50/H45 mm Bdedpjzlxlajfx Afwsg -Weight: 0.1 kg/pc.

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor Bdsdsb A I Eajpfx Afwog -Type: DIL ER-31 -Price: per piece -Number: 8 available -Weight: 0.2 kg/piece

Condition: used, Contactor, semiconductor contactor, contactor, power contactor, auxiliary contactor -Siemens: Type 3RT2027-1CL24-3MAO Bdedpfofifk Dox Afwog -Dimensions: 90/50/H145 mm -Weight: 0.5 kg

Condition: used, Year of construction: 1985, functionality: fully functional, 3150 kVA oil transformer, 20500V – 5 taps/6600V, with oil conservator, Buchholz relay, dial thermometer, Dyn5, year of manufacture 1985, make Asea Lepper, type DOHH Bdjdpow In Htofx Afwog

Condition: used, Motor contactor, auxiliary contactor, contactor, semiconductor contactor, contactor -Manufacturer: AEG -Type: SH10G.64 Bedpfjd Dpi Nox Afwjdg -Number: 3 pieces available -Price: per piece -Weight: 0.8 kg/pc.

Condition: new, bore capacity in steel (diameter) 30.0 mm throat 293 mm bore stroke 140 mm morse taper 3 MK table: 515 x 360 mm turning speeds 225 - 4300 U/min column diameter 115 mm distance spindle /table 132 / 724 mm engine output 1.0 / 1.6 kW weight 260 kg Machine height 1790 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop Bdodpfx Ajxaap Aofwjg - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint, signal white RAL 9003 PANTONE 7545c, black

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm thread M 24 ST60 thread M 30 GG20 feed 0.10 + 0.20 mm/U distance spindle /table 117 / 701 mm engine output 1.0 / 1.6 kW weight 270 kg Machine height 1840 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP Bdsdpfxjxab Nws Afwog - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 25. Coolant system B.

Condition: good (used), Control unit, control panel, control panel, control unit, foot switch, safety foot switch Bdsdswyupaepfx Afwog -Foot switch: with control box -Metal housing: with protective cover, die-cast aluminum -Switch box: with power supply block GLC 230/24-2 -Switch: Siemens -Contactor: 2x Moeller DIL EM-01-G -Individual components: see photos -Transport dimensions: 580/300/H200 mm -Weight: 10.5 kg

Condition: new, Year of construction: 2024, New product, price plus VAT. 5 x uprights a 5.00m x 1.10m, PLFB 16 solid, pre-assembled 24 x trusses a 2.70m PNB 0413 32 x safety pins Results in a row of shelves with 4 bays and 3 levels + floor space = 48 pallet spaces Manufacturer: Stow Bdjdpfx Afeq I R Uyowog Type: Pallet rack Condition: NEW Height: 5.00 m Length: approx. 11.30 m Shelf depth: 1.10 m Bracing: screwed Truss length: 2.70 m Shelf load: 3,000 kg Bay load: 12,000 kg Pallet spaces: 48 Approval: Up to earthquake zone 1 Immediately available from stock! Shipping possible with delivery address Also available in large quantities at project price! Stock items Frame 2000-12000mm Trusses 190cm - 270cm - 360cm Shelf load up to 4000kg Accessories such as floor fastening connectors Load warnings collision contactors Guard rails gratings Rear wall grating Depth bars Guard rails and much more... Just ask us!

Condition: new, Year of construction: 2024, New product, price plus VAT. 5 x uprights a 6.00m x 1.10m, PLFB 16 solid 24 x trusses a 2.70m PNB 0413 32 x safety pins Results in a row of shelving with 4 bays and 3 levels + floor space = 48 pallet spaces Manufacturer: Stow Type: Pallet rack Condition: NEW Height: 6.00 m Length: approx. 11.30 m Shelf depth: 1.10 m Bracing: screwed Truss length: 2.70 m Shelf load: 3,000 kg Bay load: 12,000 kg Pallet spaces: 48 Approval: Up to earthquake zone 1 Immediately available from stock! Bedpfx Afeq I R U Dewjdg Shipping possible with delivery address Also available in large quantities at project price! Stock items Frame 2000-12000mm Trusses 190cm - 270cm - 360cm Shelf load up to 4000kg Accessories such as floor fastening connectors Load warnings collision contactors Guard rails gratings Rear wall grating Depth bars Guard rails and much more... Just ask us!

Condition: good (used), Year of construction: 2003, Control unit, control element, interface, contactor -Manufacturer: Jungheinrich, Contactor control unit from order picking forklift type: ECE 20 -Type: 5000 7894 -Voltage: 24 V -Dimensions: 150/100/H100 mm -Weight: 1.4 kg Bedpfxeiy R Uae Afwodg

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan -Fan: Blower, radial fan -Type: 2-stage -Motor: ASEA 0.4/0.1 kW 1390/690 rpm -Fan wheel: 2x Ø 200 x 80 mm -Inlet connection: Ø 160 mm -Output connection: 190 x 180 mm -Dimensions: 815/590/H400 mm Bdedpfjy Tt Ihex Afweg -Weight: 33 kg

Condition: new, Power contactor, 55 kW, screw-mounted Bsdpszr T Shsfx Afwjdg 3RT1054-1NP36 SIEMENS

Condition: new, As a machine dealer in Offenburg, we have new and used ALZMETALL table drilling machines and column drilling machines in our range. You can find an overview of the drilling machines on our homepage. If you have any questions, just call us. Here we offer the new series of ALZMETALL pillar drilling machines with TOUCH display: ALZMETALL AX3 iTRONIC-V pillar drilling machine Condition: NEW Standard equipment 7“ TFT - LCD display with touch function: - Manual input of spindle speed setpoint - Speed display actual value - Integrated drilling depth display with touch zero point transfer - Virtual drilling depth scale in the display - Machine status displays and warnings in the display - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Continuous speed setting using adjustment lever - Spindle protection with electrical protection - Three separate buttons for clockwise rotation - anti-clockwise rotation - stop - Mushroom push button (latching) for EMERGENCY STOP - Lockable main switch - Clockwise and anti-clockwise rotation via contactor control - Control voltage 24 volts - Protection class IP 54 - Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black Technical data: Manufacturer: ALZMETALL Type: AX 3 iTronic-V Drilling capacity steel E 335 (St 60) (mm): 40 Thread cutting steel E 335 (St 60): M 24 Thread cutting cast iron EN-GJL-200 (GG 20): M 30 Short spindle: MK 3 Spindle stroke (mm): 120 Usable projection (mm): 293 Column diameter (mm): 115 Machine table (mm): 515 x 360 T-slots (mm): 2 x 14 x 224 Distance spindle-table (mm): 117 / 701 Feed: 0.1 + 0.2 mm/rev Machine height (mm): approx. 1840 Drive: stepless Speed range (r/min): 160 - 2250 Motor (kW): 1.45 / 1.9 Weight (kg): approx. 270 Special equipment included: - Foot switch in addition to the thread cutting device Other options can be retrofitted: - LED machine light - Coolant system B - Technology calculator in the display - Maximum drilling depth display Optional accessories: - Machine vice size 3/125mm BB type BON3 - Machine vice size 4/160mm BB type BON4 - Keyless drill chuck Supra 1-13mm or 3-16mm MK3 Available at short notice. For self-collection. Forklift available. Shipping also possible Bsdpjy S Auuefx Afwjdg Subject to errors, changes and prior sale. Not the right machine? Then please contact us.

Condition: used, Contactor, semiconductor contactor, contactor, power contactor -Maximum: 22 kW 660 V Bodpfx Aedngwfsfwodg -Price: per piece -Number: 8x available -Dimensions: 135/85/H115 mm -Weight: 6.5 kg

Condition: new, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 45.0 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 615 x 430 mm turning speeds 100 - 1800 U/min column diameter 145 mm thread M 24 ST60 thread M 30 GG20 feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 138 / 688 mm engine output 1.4 / 2.2 kW weight 470 kg Machine height 1865 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - Electromagnetic feed clutch * with overload protection and electrical * Comfort cross-handle switch * Feed rates selectable 0.1-0.2-0.3-0.4 mm / rev - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable Bsdoxab Nkspfx Afwjdg - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 12. LED machine light - 24. Coolant system A * in the machine base

Condition: good (used), Item: LC-5839-40 - Self-Priming Pump SELF-PRIMING STAINLESS STEEL HYGIENIC PUMP – 2.2 KW Item: Self-Priming Hygienic Centrifugal Pump Motor: ASEA Motor Power: 2.2 kW Material: Stainless steel Condition: Used / Serviced Location: Denmark Used self-priming stainless steel hygienic pump, suitable for applications in the dairy, food, beverage, and general process industries. The pump is designed for applications where the pumped liquid may contain air or gas and where self-priming capability is required. This type of pump is commonly used for CIP return, tank emptying, and hygienic product transfer. Technical Information Self-priming centrifugal/liquid-ring pump Stainless steel construction Hygienic sanitary connections Bjdotrltdopfx Afwedg ASEA electric motor Motor power: 2.2 kW Motor has been reconditioned New seal fitted Additional new Alfa Laval spare/seal parts included Suitable for hygienic food-processing applications.

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 80 - 1125 U/min column diameter 115 mm thread M 24 ST60 thread M 30 GG20 feed 0.10 + 0.20 mm/U distance spindle /table 117 / 701 mm engine output 1.0 / 1.6 kW weight 270 kg Machine height 1840 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer Bsdpfoxabyisx Afwjdg * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 25. Coolant system B.

Condition: new, bore capacity in steel (diameter) 55.0 mm throat 300 mm bore stroke 140 mm morse taper 4 MK Bodexabn Topfx Afwodg table: 615 x 430 mm turning speeds 70 - 1200 U/min column diameter 145 mm thread M 30 ST60 thread M 36 GG20 feed 0.10 + 0.30 mm/U distance spindle /table 150 / 735 mm engine output 1.8 / 2.9 kW weight 380 kg Machine height 1850 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - automatic spindle feed with feed overload protection - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 12. LED machine light - 24. Coolant system A * in the machine base

Condition: new, Year of construction: 2024, New product, price plus VAT. 5 x uprights a 4.00m x 1.10m, PLFB 16 solid, pre-assembled 16 x trusses a 2.70m PNB 0413 32 x safety pins Results in a row of shelves with 4 bays and 2 levels + floor space = 36 pallet spaces Manufacturer: Stow Type: Pallet rack Condition: NEW Height: 4.00 m Length: approx. 11.30 m Shelf depth: 1.10 m Bracing: screwed Truss length: 2.70 m Shelf load: 3,000 kg Bay load: 6,000 kg Pallet spaces: 27 Approval: Up to earthquake zone 1 Available immediately from stock! Shipping possible with delivery address Also available in large quantities at project price! Goods in stock Frame 2000-12000mm Trusses 190cm - 270cm - 360cm Shelf load up to 4000kg Accessories such as floor fastening connectors Load warnings collision contactors Guard rails gratings Rear wall grating Bdjdpfxeq I R Ugj Afwjg Depth bars Guard rails and much more... Just ask us!