Used Bielomatic Roll Collator Collator for sale (7,879)

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP 3135 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Top roll diameter: 350 mm Lower roll diameter: 330 mm Side rolls diameter: 250 mm Guaranteed installed power: 14.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 13,000 kg Length: 5,700mm Width: 1,800mm Height: 2,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 20 mm Bending performance (full working width) 15 mm from pipe diameter 1750 mm Gkjdpoiivc Defx Abfoa Rolling capacity (full working width) 14mm Bending capacity (full working width) 12mm from pipe diameter 455 mm Standard equipment: planetary movement of the side rollers Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN HAV 3162 variable three-rolls bending machine Electronically controlled, hydraulic three-rolls bending machine Technical specifications: Number of Rolls: Three Geometry of the side rolls: variable Working length: 3050 mm Top roll diameter: 620 mm Side rolls diameter: 550 mm Pressure force against the top roll: 630 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 55 kW (75 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 45,000 kg Length: 7,600mm Width: 3,700mm Height: 3,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Gkedpfxsiivgys Abfea Rolling capacity (full working width) 75 mm Bending performance (full working width) 48 mm from a pipe diameter of 3,100 mm Rolling capacity (full working width) 55 mm Bending performance (full working width) 40 mm from pipe diameter 805 mm Standard equipment: variable geometry with linear guides for rolls movement Extra long release arm for increased frame stability Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel Hitech hydraulic and electric package Simultaneous rotation and rolls movement Safety trip wire with emergency stop and CE certification central lubrication Water cooling for the hydraulics cone bending device Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP

Condition: new, functionality: fully functional, Year of construction: 2026, Electronically controlled, hydraulic four-roller bending machine Make FACCIN, model 4 HEL/S 2122 Technical specifications: Number of Reels: Four Gkedpfxod Eqg He Abfea Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 225 mm Lower roller diameter: 215 mm Side roller diameter: 165 mm Pressure force against the top roller: 100 tons Guaranteed installed power: 9.2 kW (12.5 hp) Guaranteed maximum turning speed: 4-8 m/min Guaranteed machine weight: 4,450 kg Length: 3,500mm Width: 1,200mm Height: 1,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 11 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,100 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 286 mm Standard equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged folding bearing Electronic parallelism system EPS Hardened rollers for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device Optional equipment included: CNC control PGS-ABSOLUTE

Condition: new, functionality: fully functional, Year of construction: 2026, 4 HEL 3128 Four rolls bending machine Electronically controlled, hydraulic four-rolls bending machine Make FACCIN, model 4 HEL 3128 Technical specifications: Number of Rolls: Four Geometry of the side rolls: linear guides Working width: 3050 mm Top roll diameter: 285 mm Lower roll diameter: 275 mm Side rolls diameter: 205 mm Certified rolls hardness: 950-1050 N/mm² Pressure force against the top roll: 150 tons Working pressure at maximum power: 190 bar Guaranteed installed power: 11 kW (15 hp) Guaranteed maximum rotation speed: 4-8 m/min Guaranteed machine weight: 9,000 kg Length: 5,450mm Width: 1,520mm Height: 1,450mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 12 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,425 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6.5 mm from pipe diameter 370 mm Gsdpfsiink Sex Abfoka Standard equipment: Double linear guide system for rolls movement Extremely wide bearing blocks MCS double bearing system for the rolls rotation Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device FACCIN AP package CNC control PGS-ULTRA

Condition: new, functionality: fully functional, Year of construction: 2026, Specifications R-62 Standard rolls diameter: 460 mm Diameter of the central / side shafts: 180 /160 mm Motor power: 15 kW Rotation speed: 0-7m/min Net weight: 8,000 kg Gedeiinllepfx Abfoka Standard version R-62S: Vertical working position Hydraulically variable speed of rotation on all three rolls with hydraulic motor. one motor for the top roll, one motor for the side rolls Automatic speed compensation between top and side rolls Hydraulic adjustment of the side rolls Digital displays for the position of the side rolls Fully hydraulically adjustable guide rolls SKF ball or roller bearings in all journals Hardened gears running in oil Hanging control unit with mini joysticks for all control functions with digital displays Emergency push button Complete set of adjustment tools Operating and maintenance manual

Condition: new, functionality: fully functional, Year of construction: 2026, RCMI 280 Three-roll profile bending machine Technical characteristics: Section modulus 720 cm³ Main shaft diameter 280 mm Side shaft diameter 280 mm Outside diameter of the bending rolls 720 mm Godpfeiivhdjx Abfska Adjustable rolling speed 0-4 m/min Installed power 44 kW (60 hp) Weight 34,000 kg Standard equipment: Hydraulic adjustment of the side rolls 3 rolls powered (3 hydraulic motors + 3 planetary reduction gears) Independent lateral profile guide rollers, adjustable in 6 directions, fully hydraulic Automatic scope rotation speed compensation Complete universal rolls set for standard profiles and beams (12 pieces) Tool kit for machine equipment Low-voltage control on mobile operator panel Safety device according to regulations Technical documentation and CE certificates Digital displays for the rolls position of the side rolls

Condition: new, functionality: fully functional, Year of construction: 2026, Hydraulically controlled three-roller bending machine Make BIKO, model B3 2021 Technical specifications: Number of Reels: Three Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 215 mm Side roller diameter: 195 mm Guaranteed installed power: 7.2 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,000 kg Length: 3,700 mm Width: 1,000mm Height: 1,100 mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 13 mm Bending capacity (full working width) 9 mm from pipe diameter 1075 mm Rolling capacity (full working width) 9 mm Bending performance (full working width) 7 mm from pipe diameter 280 mm Standard equipment: Double linear guide system for the roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged release Hardened rolls for high wear protection Hydraulic parallelism system of the side rolls Godpfxocuxp To Abfska Digital display for the position of the side rolls cone bending device Safety trip wire with emergency stop and CE certification Mobile control panel

Condition: new, functionality: fully functional, Year of construction: 2026, Hydraulic two-roller bending machine Guaranteed capacities: Sheet thickness Bending with material 260 N/mm² Yield point: 2 mm Sheet thickness bending with material AISI 304-316 stainless steel: 1.5 mm Cycle time per part: 15 seconds Technical specifications: Working length: 1000 mm Installed power: 5.5 kW Rolling speed: 7 m/min Gsdpfsc S N Riex Abfoka immediately available from the factory!

Condition: new, functionality: fully functional, Year of construction: 2026, Three rolls variable axis bending roll Make FACCIN, model HAV/S 3145 Technical specifications: Number of Reels: Three Geometry of the side rollers: variable Working width: 3000 mm Top roller diameter: 450 mm variable three-roller bending machine Gkjdpfx Aboc S N Nqofea

Condition: new, functionality: fully functional, Year of construction: 2026, Mechanical asymmetrical three-roller bending machine with pre-bending Make FACCIN, model ASI 2015 Guaranteed services: Sheet thickness rolls at 750 mm diameter 5 mm Sheet thickness bending at 750 mm diameter 4 mm Sheet thickness rollers with 195 mm diameter 4 mm Sheet thickness bending at 195 mm diameter 3 mm Performance data refer to steel with a yield point of 240 N/mm² and a strength of 370 N/mm² Gsdpfecuxpqox Abfska Technical specifications: Working length 2,000 mm Top roller diameter 150 mm Bottom roller diameter 150 mm Side roller diameter 150 mm Installed power 4.3 kW rolling speed 4 m/min Length 3,300 mm Width 750mm Height 1,200 mm Weight 2,136 kg Standard equipment: All rolls forged and inductively hardened Both central rollers driven Safety control with immediate stop of all machine movements Machine stand stands on frame carrier made of welded construction. This ensures optimum stability and reliability of the machine. Optimum power transmission in the machine stand through long guides with straight-line positioning movement of the bending rollers. (No curved adjustment movement and therefore no torsional forces in the machine stand) Digital display for the position display of the side roll motorized adjustment of the side roll brake motor for rotation and side roll movement Cone bending device with hardened stop block Emergency stop trip wire around the machine Machine with CE certification and documentation

Condition: new, Year of construction: 2026, color: grey, overall weight: 15,000 kg, maximum load weight: 12,050 kg, empty load weight: 2,950 kg, loading space volume: 36 m³, loading space width: 2,300 mm, loading space length: 6,500 mm, loading space height: 2,400 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors. Gkedpsy Uzd Tjfx Abfsa Body: Roll-off container with double-wing door, approx. 36 m³, ARCHIVE IMAGES. Standard roll-off container, external rollers lubricated and replaceable, floor 5 mm, walls made of 3 mm steel, stringers 750, double-wing doors with reinforcement and Dutch door lock, all-around tarpaulin and net hooks, zinc-plated ladder rungs according to UVV on the front end, warning markings, RAL 7016 anthracite gray. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, Year of construction: 2026, color: grey, overall weight: 15,000 kg, maximum load weight: 12,050 kg, empty load weight: 2,950 kg, loading space volume: 36 m³, loading space width: 2,300 mm, loading space length: 6,500 mm, loading space height: 2,400 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors. Body: Roll-off container with double-wing door, approx. 36 m³, ARCHIVE IMAGES. Standard roll-off container, external rollers are lubricated and replaceable, floor 5 mm, walls made of 3 mm steel, stringers 750, double-wing doors with reinforcement and Dutch door latch, all-round tarpaulin and net hooks, galvanized ladder rungs according to UVV on the front end, warning markings, RAL 7016 anthracite gray. ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to changes, prior sale and errors! Gkodpfx Absy Uzd Hsfoa

Condition: used, mileage: 284,000 km, power: 375 kW (509.86 HP), first registration: 08/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Trailing steering axle liftable. * Full service history (service book maintained) ----Palfinger hooklift PH T20 SLD 5, radio remote control, hydraulic internal locking, hydraulic front locking, hydraulically extendable underrun protection, additional hydraulic connection for attachments. ----* MAN BrakeMatic (electronic braking system) * MAN Media Package Navigation * Connectivity board module (Rio Box) * Control module for external data exchange (KSM) + fleet management * Nordic cab insulation (for cold climates) * 12-speed automatic transmission * MAN EasyStart (hill-hold function) * Emergency Brake Assist 2 (EBA2) * Lane Guard System IV (LGS IV) * Safety Package Plus * Comfort Package 1 Driver * Automatic wipers with rain sensor * Rear axle differential lock * Traction control (ASR) Gkjdpfjvf Sxkox Abfea * Rear axle air suspension * Digital axle load display (ALM) in cab, air-suspended axles * Liftable trailing axle * Duomatic brake coupling * Anti-lock braking system (ABS) * Retarder * Emergency stop signal (ESS) * Electronic Stability Program (ESP) * Disc brakes * Electric slide/tilt roof, glass version * Main battery switch * Hill-start assist * XLX cab * Exterior transparent sun visor * Refrigerator in cab * Central locking with remote control * Immobilizer (transponder) * MAN TipMatic 12 26 DD transmission with retarder 35 * Automatic climate control * Stationary air conditioning * Additional warm air heater * Driver's seat heating * 6-cylinder engine * 590-liter fuel tank * Additional high beam and fog lamps with cornering light function * Euro 6 engine configuration * Controlled rocker arm brake (EVBec) * Gearbox rocking function * Engine configuration with AdBlue * Drawbar hitch * Air-suspended driver's seat * Lower bunk * Adaptive cruise control (ACC) with stop-and-go function * Steering trailing axle * Without spare wheel ----Sale exclusively to commercial customers! No guarantee for the information provided! Subject to prior sale! Only our general terms and conditions apply! We are happy to provide you with a leasing or financing offer.

Condition: excellent (used), functionality: fully functional, mileage: 295,122 km, power: 375 kW (509.86 HP), first registration: 09/2018, fuel type: diesel, empty load weight: 13,895 kg, maximum load weight: 18,105 kg, overall weight: 32,000 kg, axle configuration: 8x4, next inspection (TÜV): 10/2026, fuel: diesel, gearing type: mechanical, emission class: euro6, suspension: steel-air, number of seats: 2, Year of construction: 2018, Equipment: ABS, air conditioning, full service history, parking heater, retarder, Mercedes-Benz Arocs 3251/Retarder/HIAB/8x4/26T • Manufacturer: Mercedes-Benz • Model: Arocs 3251 • Mileage: 295,122 km • First registration: 09/03/2018 • Power: 375 kW / 509 hp • Wheel configuration: 8x4 • Wheelbase: 4.60 meters • Roll-off system: HIAB XR26S56 • Trailer coupling • Transmission: Manual transmission • Cruise control • Intercom system • Differential lock • ASR (Anti-Slip Regulation) • ABS (Anti-lock Braking System) • Air conditioning • Retarder • Emission standard: Euro 6 Gkedpfszt Sp Ujx Abfja • MOT (Technical Inspection): Oct. 2026 • Unladen weight: 13,895 kg • Payload: 18,105 kg • Permissible total weight: 32,000 kg • Technically possible total weight of the vehicle combination: 68,000 kg • German vehicle • German documents • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale. - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: used, functionality: fully functional, mileage: 653,581 km, power: 375 kW (509.86 HP), first registration: 08/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, next inspection (TÜV): 04/2027, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6d, suspension: steel-air, number of seats: 2, Year of construction: 2020, Equipment: air conditioning, central locking, cruise control, differential lock, full service history, parking heater, Iveco Starlis 510/S-Way/Intarder/Auxiliary Air Conditioning/MOT: 04.27 • Manufacturer: Iveco • Type: Stralis 510 • Mileage: 653,581 km • First registration: 27.02.2020 • Power: 375 kW / 509 hp • Transmission: Automatic • Air conditioning • Auxiliary heater • Navigation system • Distance control • Lane keeping assist • Differential lock • Intarder Gedpjzt Spbsfx Abfska • 2x beds • 2x cool boxes • Roof hatch • Euro: 6d • MOT: 04.2027 • Unladen weight: 8180 kg • Payload: 9820 kg • Permissible total weight: 18,000 kg • German vehicle • German documents • Ready for immediate use • This offer is non-binding and subject to change. • Subject to prior sale. • Errors and/or typos not excluded. • Sale subject to our general terms and conditions.

Condition: used, mileage: 500,892 km, power: 315 kW (428.28 HP), first registration: 02/2015, fuel type: diesel, empty load weight: 11,590 kg, maximum load weight: 14,410 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 4,500 mm, next inspection (TÜV): 08/2027, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, air conditioning, cruise control, differential lock, traction control, trailer coupling, Body manufacturer: Meiller, unladen weight: 11590 kg, permissible total weight: 26000 kg, tire size: 315/70 R22.5, 1st axle: , 2nd axle: , 3rd axle: , leaf spring air suspension, 1 x airbag, tachograph, trailer coupling (pintle hook), ASR traction control, heated seats, aluminum rims: ALCOA, electric windows, sunroof, electric exterior mirrors, central locking, rear differential lock, sun visor, work lights, - 1 previous owner - differential locks - AP axles - leaf spring air suspension - body: MEILLER RK 20.70 sliding hook - valid technical inspection until 08/2027, errors and changes excepted. Gedpfx Abozuhi Tsfoka

Condition: good (used), Used stainless steel container Article number: 10534 Last application: Cosmetics Volume: approx. 350 liters Type: Standing on 4 rollers Material (in contact with media): 1.4301 / AISI304 Design: Double-walled and heatable Container dimensions: Outer diameter: 920 mm Cylindrical height: 580 mm Overall width: 1010 mm Overall length: 1010 mm Overall height: 1290 mm Materials: Inside: 1.4301 / AISI 304 Gedpfx Aegxflqebfoka Exterior parts: 1.4301 / AISI 304 Equipment: Outlet diameter: 40 mm Distance from outlet to bottom: 240 mm Outlet valve: Ball valve

Condition: good (used), Used, insulated stainless steel tank with electric heating Last use: Food Article number: 10345 Volume: 90 L Type: Standing on four rollers Material (in contact with media): 1.4301 / AISI 304 Design: Single-walled with insulation Bottom: Flat bottom Top: Hinged lid Operating pressure according to nameplate: ATM Tank dimensions: Gsdod Ngdaepfx Abfjka Outer diameter: 500 mm Inner diameter: 450 mm Manhole: 450x305 mm Overall height: 1340 mm Height of legs: 440 mm Overall width: 970 mm Overall length: 1030 mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Equipment: Hinged lid Various connections Insulation Electric heating element in the tank Control cabinet Welded grating

Condition: good (used), Used stainless steel process vessel Article number: 10302 Gkodod H Tvzjpfx Abfoa Volume: 200 liters Type: Standing on rollers Material (media-contact): V2A / AISI 304 stainless steel Number of fixations: 4 rollers Bottom: Dished bottom Top: Removable dished bottom Operating pressure according to nameplate: ATM Vessel dimensions: Inner diameter: 670 mm Outer diameter: 690 mm Height of feet: 220 mm Distance from drain to bottom: 1. 340 mm, 2. 330 mm Overall height: 1700 mm Overall width: 1020 mm Materials: Inside: V2A / AISI 304 External parts: 1.4301 / AISI 304 Equipment: Nameplate: No Outlet: Bottom valve Various connections Removable top Control box Propeller agitator present

Condition: used, Used stainless steel rolling container Article number: 10872 Last known use: unknown Volume: 515 liters Type: Standing on rollers Material (in contact with media): 1.4404 / AISI 316 Manhole: 440mm Design: Single-walled Operating pressure according to nameplate: ATM Container dimensions: Outer diameter: 1000mm Overall width: 1220mm Overall height: 1730mm Cylindrical height: 500mm Distance from outlet to bottom: 630mm Materials: Interior: 1.4404 / AISI 316 Gsdjy Uh Huepfx Abfjka Exterior parts: 1.4301 / AISI 304 Equipment: Nameplate: no Outlet diameter: 50mm Outlet valve: disc valve Height of feet: 1090mm

Condition: good (used), Used stainless steel container on rollers Item number: 10555 Quantity: 9 Last application: Paints Volume: 110 liters Type: on 4 rollers Material (in contact with media): 1.4301 / AISI304 Design: Single-walled Opening: 600mm Container dimensions: Outer diameter: 635mm Cylindrical height: 400mm Overall height: 600mm Gksdpfxsgzbp Ho Abfoa Overall width: 725mm Overall length: 725mm Materials: Inside: 1.4301 / AISI 304 Exterior parts: 1.4301 / AISI 304

Condition: good (used), Used stainless steel rolling container Article number: 10521 Last use: Chemicals, paints Volume: approx. 700 liters Type: Standing on 4 castors Material (in contact with media): 1.4571 / AISI316 Design: Single-walled Container dimensions: Outer diameter: 1000 mm Gedpegw Sgusfx Abfoka Inner diameter: 995 mm Cylindrical height: 780 mm Height of feet: 200 mm Total height: 1190 mm Total width: 1080 mm Total length: 1230 mm Materials: Inside: 1.4571 / AISI316 Outer parts: 1.4301 / AISI304 Features: Nameplate: no Distance from outlet to floor: 150 mm Outlet diameter: 42 mm Liter scale inside

Condition: good (used), Used stainless steel container on rollers Article number: 10556 Last application: Paints Volume: 65 liters Type: on 4 rollers Material (in contact with media): 1.4301 / AISI304 Design: Single-walled Gsdjgzbqkepfx Abfoka Opening: 400mm Container dimensions: Outer diameter: 420mm Cylindrical height: 515mm Overall height: 655mm Overall width: 420mm Overall length: 470mm Materials: Inside: 1.4301 / AISI 304 Exterior parts: 1.4301 / AISI 304

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 16,000 kg, maximum load weight: 13,900 kg, empty load weight: 2,100 kg, loading space volume: 12 m³, loading space width: 2,420 mm, loading space length: 6,000 mm, loading space height: 800 mm, Dear Sir or Madam, We are offering brand new, factory-new roll-off platforms with steel side walls for sale, manufactured in our own production facility. Gjdpfx Aeyrpkzsbfoka The platform features the following: - Manufactured according to DIN 30722-1 - Mounting bracket, 50 mm diameter - Hook height 1570 mm - Platform dimensions: 6,000 mm x 2,420 mm x 800 mm - 2x galvanized ladder rungs - 5 mm S-235 floor plate - Sheets and profiles continuously welded - Laterally spring-relieved steel side walls with 3 mm S-235 steel thickness - 7x side wall hinges per side for increased performance - Drive-over & spring-relieved rear gate (4.5 t point load!) - Side walls, gate, and rear supports can be completely disassembled quickly and easily if required - Outer rollers are lubricatable and replaceable - 5 pairs of recessed lashing eyes with a tensile force of 2.5 t each, variably positionable in multilock strips - Front: 2x lashing rings, each with a tensile force of 7 t - All steel parts automatically sandblasted before processing! - Only steel from Thyssen Krupp used, including certificate - Primer: Premium 2K zinc phosphate primer - Paint: High-quality 2K paint in RAL 7016 - Warning marking according to §32 (1) StVO & DIN 67520 - Includes type plate & container inspection according to DGUV rule 114-010 (formerly BGR 186) - Immediately available - Unit price: €7,150.00 plus VAT - Also available in other platform lengths (4.5m / 5m / 5.5m / 6.5m) Nationwide delivery possible for an additional charge! If you are interested in other roll-off container products, we would be happy to receive your inquiry!

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 16,000 kg, maximum load weight: 13,800 kg, empty load weight: 2,200 kg, loading space volume: 13 m³, loading space width: 2,420 mm, loading space length: 6,500 mm, loading space height: 800 mm, Dear Sir or Madam, We are offering a new 13m3 roll-off container with drop sides for sale. The container has the following features: - Standard: DIN 30722-1 - Lifting height: 1,570 mm - Lifting bracket: 50 mm diameter - Container internal length: 6,500 mm - Container internal width: 2,420 mm - Container internal height: 800 mm - Floor plate: S235 steel (St37-2) with 5 mm floor thickness - Two-part, spring-relieved side walls made of S235 steel with 3 mm side wall thickness - All steels exclusively from Thyssen Krupp - The steel parts are automatically sandblasted before processing to optimize further processing and corrosion resistance - Outer rollers are lubricatable and replaceable - 5 pairs of recessed lashing hooks in a multilock rail with 2,500 kg (positionable as needed) - 2 lashing rings on the front side, each with a tensile strength of 7,000 kg - Swing-out tailgate including spring-relieved access ramp - All posts and side walls can be easily and completely removed if required! - Front wall height: 1,600 mm - Longitudinal beams: IPN 180 - All-round net hooks - Painted in RAL 7016 anthracite - The container is completely primed with a 120mu zinc phosphate primer and then painted with high-quality 2-component paint in a thickness of 80mu - Total weight: 16,000 kg / Empty weight: approx. 2,300 kg / Payload: 13,700 kg - Including nameplate and container inspection according to DGUV rule 114-010 (formerly BGR 186) - Warning marking according to §32 (1) StVO and DIN 67520 - Unit price: €7,800.00 plus VAT - Available immediately Also in stock with other useful internal lengths (4.5m / 5m / 5.5m / 6m) Gkodpfx Asypb Nwobfsa Nationwide delivery possible for an extra charge! If you are interested in other roll-off container products, please do not hesitate to contact us at any time. Errors and prior sale excepted.