Used Biesse Hsd Pe 106 Module for sale (12,678)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, X working area: 3200 mm Y working area: 1200 mm Electrospindle Vertical drilling heads: 10 Horizontal drilling heads X: 4 Horizontal drilling heads Y: 2 Grooving saw blade in X direction 16-position tool changer Worktable with 6 beams Software: Biesse Bsolid Nedpfxsyv Avmo Akuect PICCHIO 2200 vacuum pumps, 90 m3/h Safety mats Protective nets

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, power: 67 kW (91.09 HP), input voltage: 400 V, input frequency: 50 Hz, workpiece length (max.): 3,100 mm, workpiece width (max.): 2,205 mm, workpiece height (max.): 170 mm, Equipment: documentation/manual, ROVER A FT 2231 Njdeyzxyrepfx Akujct

Condition: used, machine/vehicle number: 008483, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Max feed speed: 30 m/min Maximum panel thickness: 60 mm Operating Units: 11 nr Njdpfx Asyxmx Rjkuoct

Condition: used, Year of construction: 2007, with feed unit for molded parts with hot melt glue specification Top condition cleaned, function tested, tested, trial run used, good condition Manufacturer: Artech-Biesse Type: Single Year of manufacture: 2007 Machine no.: 91009 CE type tested with automatic edge trimming, Nodpfjvwgizox Akujct round edge banding tilt-adjustable worktable – for bevel edge banding extendable table extension with roller support feed system – steplessly adjustable edge thickness 0.4 - 3.0 mm workpiece height min. 10, max. 120 mm required space approx. 1400 mm x 1000 mm x 1600 mm weight approx. 320 kg total connected load 5.2 kW Location 97447 Gerolzhofen, free loaded, unpacked Transfer in as-inspected condition, without warranty or guarantee.

Condition: used, machine/vehicle number: 007687, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Ncjdowuz Npjpfx Akuet Operating Units: 7 nr

Condition: used, machine/vehicle number: 007645, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Ncjdpfxjwuz Nie Akuot Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, machine/vehicle number: 007087, X axis working area: 4300 mm Y axis working area: 2200 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 40 Total number of tool changer positions: 30 Nedey Nkrvjpfx Akuoct

Condition: used, machine/vehicle number: 007913, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Ncsdpfx Akowkf Dveuot Corner Rounding Unit: yes Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 008112, X axis working area: 3390 mm Y axis working area: 1535 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Total number of drilling spindles: 21 Ncodpfx Akew Idgvjuot Total number of tool changer positions: 14

Condition: used, machine/vehicle number: 007685, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3200 mm Operating Units Right Side: 15 nr Operating Units Left Side: 15 nr Nedpjy Nkqfofx Akujct

Condition: used, machine/vehicle number: 007641, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1200 mm Nedpfxewuz R He Akuect Operating Units Right Side: 8 nr Operating Units Left Side: 9 nr

Condition: used, machine/vehicle number: 008370, X axis working area: 5055 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 19 KW Number of controlled axes: 5 axes Maximum edge height: 60 mm Nsdpjx A Tk Sefx Akuect Total number of drilling spindles: 28 Total number of tool changer positions: 31

Condition: used, machine/vehicle number: 005062, Type of edging: Thin edge, Thick edge Ncjdpfx Asybawdjkuet Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008359, X axis working area: 2500 mm Nodjx Swcaspfx Akujct Y axis working area: 1320 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 4 axes Total number of drilling spindles: 16 Total number of tool changer positions: 22

Condition: ready for operation (used), Year of construction: 2002, number of axes: 3, total width: 1,500 mm, overall weight: 710 kg, product length (max.): 3,390 mm, This 3-axis BIESSE Rover 24S was manufactured in 2002. It features a length of 3390 mm and an overall width of 1500 mm, with a conveyor speed ranging from 28 to 140 m/min. The machine has a weight of 710 kg and is equipped with a powerful 1.1 kW motor. If you are looking to get high-quality CNC processing capabilities, consider the BIESSE Rover 24S machine we have for sale. Contact us for further details. • Overall width: 1500 mm • Conveyor height: 890 + 940 mm • Conveyor speed: 28–140 m/min • Conveyor drive motor: 0.75 kW • Exhaust fan duty: 5,500 m³/h Njdoy E Nydspfx Akuoct • Motor: 1.1 kW • Minimum working length: 700 mm • Compressed air connection: 1/2" • Compressed air consumption: tab. 1 • Electric power supply cable section: 4 x 1.5

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. Njdpfx Aoy Ehrxekuect HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Nsdpfx Aewlbxlokusct Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Working area X: 6,400 mm Working area Y: 1,500 mm Nodowlcqvjpfx Akuect Number of milling spindles: 1 Main motor: 13 kW Maximum rotation speed: 24,000 rpm Tool clamping system: HSK-F63 Tool change positions: 8 Vertical drilling heads: 20 Horizontal drilling units X: 4 Horizontal drilling units Y: 4 2 vacuum pumps, each 360 m³/h Nesting Remote control Software: BIESSE WORKS Overall dimensions: 11,004 × 5,334 mm Weight: 4,900 kg

Condition: used, machine/vehicle number: 008125, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Nodpfxsw Tivmo Akujct Operating Units: 9 nr

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Work area X: 3600 mm Ncodpfx Akjy Hp Scouet Work area Y: 1250 mm Maximum workpiece thickness: 70 mm 3-axis electro-spindle ISO30 tool holders Vertical drilling heads: 13 Horizontal drilling heads X: 4 Vertical drilling heads Y: 2 Work table: Nesting FT 18-position tool changer Control system: PC Control Safety mats Protective netting Includes ISO30 collets and a Busch vacuum pump.

Condition: used, Milling spindle Manufacturer: HSD Type: ES 779L 4P 12.00 kW H1 HSD milling spindle 12 kW with tool changer and 6-position station for Kuka Quantec series Consisting of: 1 piece Water-cooled milling spindle with tool changer HSD ES779L 4P 12.00 kW H1, Njdpfewyay Djx Akuoct liquid cooling 1 piece Tool station for 6 tools (tool changer station) with Leonie measuring station for checking the tools 1 piece Kuka Tech cabinet with KEB frequency inverter, control technology and water cooler Art. No. 00216249, Serial No. 0395009, year of manufacture 2018 Weight 360 kg 1 piece Hose package and connecting cable from the control cabinet to the HSD spindle. Originally designed for a Kuka robot of the Quantec series, incl. all brackets and connections.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, 1x blue Euro container Dimensions: 400x300x210mm Model: TK400/210 - Minimum order is 3 pallets (120 boxes)! Nedpfovu Du Aex Akuect Very clean, the boxes have only been used indoors and for storing clothes and packages! Shipping only possible from 5 pallets (200 pieces) for an additional charge. A total of 1200 boxes are currently available.

Condition: used, Year of construction: 2012, total height: 2,000 mm, total length: 4,500 mm, total width: 2,350 mm, Empty weight: 1.530 kg - Details: - └ Description: Including dust extraction - Year: 2012 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 18966 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - - Main motor power [kW]: 11 - Type milling table: Flat table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Tool changer positions [pcs.]: 12 - System/software: BiesseWorks - Safety feature: Enclosed fence, Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Busch - └ Type: MM 1322 A VM8 - └ Year of manufacture: 2012 - └ Main motor power [kW]: 6 - └ Capacity [m³/h]: 360 - └ Connection diameter [mm]: 70 - └ Vacuum pressure [bar]: 300 - Table length [mm]: 3100 - Table width [mm]: 1500 - Working range X [mm]: 3309 - Working range Y [mm]: 1703 - Z-axis working range [mm]: 120 - Current consumption [A]: 24 - Power [kW]: 14.2 - Transport dimensions: 4500mm x 2350mm x 2000mm (l x w x h) - Transport weight [kg]: 1530kg - Transport packages [pcs.]: 2 Njdpeyz Ad Isfx Akuoct Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Nedpfx Akjyqxxrjusct Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 40 Total number of tool changer positions: 22

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Working area X: 4600 mm Working area Y: 1570 mm Working area Z: approx. 250 mm 3-axis electrospindle Vertical drilling heads: approx. 22 Horizontal drilling heads X: 6 Horizontal drilling heads Y: 4 Ncodpfx Aoy Exz Dskujt Grooving saw blade in X direction Fixed horizontal motor for door lock mortising Chain-type tool changer with approx. 22 positions Worktable with 8 beams Vacuum pump 90 m³/h Software: BiesseWorks Safety mats Protective safety nets Weight: approx. 6100 kg Including vacuum suction cups and 1 tiltable aggregate for drilling-routing-sawing